SCEJ 45th Autumn Meeting (Okayama, 2013) : Session programs

`SCEJ 45th Autumn Meeting (Okayama, 2013)`

Session programs

Symposium <Progress in Innovative Powder Process Technology -Generation, Functionalization, Measurement, Characterization and Handling->

W101-W127, W201-W209

Most recent update: 2013-08-20 14:03:53

Time	Paper ID	Title / Autors	Keywords	Topic code	Ack. number
Hall W, Day 1
(9:00–10:20) ( Saeki T.)
9:00– 9:20	W101	Numerical simulation and experience of powder mixing by elastic blades Mizutani Shin, Sakai Mikio	Granular analysis Elastic body analysis Powder mixing	S-19	704
9:20– 9:40	W102	Three-dimensional simulation of a bubbling fluidized bed by the DEM coarse grain model and its validation Abe M., Sakai M.	Fluidized bed DEM Coarse grain model	S-19	595
9:40– 10:00	W103	Analysis of The Particles Mixing Characteristics for an Agitating Mixer by DEM simulation Yamamoto Michinori, Kano Junya, Ishihara Shingo	DEM simulation Agitating Mixer Mixing Characteristics	S-19	130
10:00– 10:20	W104	Analysis of Grinding Phenomena using DEM Simulation Ishihara U., Zhang Q., Kano J.	DEM breakage grinding	S-19	786
(10:20–12:00) ( Yamamoto M., Fukui K.)
10:20– 10:40	W105	Relationship between feed amount and separation efficiency for dry separation using gas-solid fluidized bed Yagi Ryosuke, Yoshida Mikio, Oshitani Jun, Kubo Yasuo, Nakatsukasa Shingo	dry separation fluidized bed feed amount	S-19	239
10:40– 11:00	W106	Fundamental study on fluidizing time dependence of density segregation in gas-solid fluidized bed Okamoto Ryota, Yoshida Mikio, Oshitani Jun	fluidized bed density segregation fluidizing time	S-19	252
11:00– 11:20	W107	Effect of fluidizing airflow rate on dry density-segregation in gas-solid fluidized bed Teramoto Kazuhiro, Yoshida Mikio, Oshitani Jun, Kubo Yasuo, Nakatsukasa Shingo	fluidized bed density segregation airflow rate	S-19	357
11:20– 11:40	W108	Influence of particle size on particle circulation rate in three-compartment internal circulating fluidized bed Sugimoto Masaya, Noda Reiji	loop-seal fluidized bed particle circulation	S-19	790
11:40– 12:00	W109	Synthesis of precursor powder using a fluidized bed for conversion to electromagnetic-wave-absorptive magnetite Nakazato T., Iikuma Y., Matsuzaki A., Kai T.	magnetite electromagnetic wave absorption fluidized bed	S-19	981

(14:00–15:00) ( Ogi T.)
14:00– 14:20	W116	Improvement of classification performance of dry classifier usign mist Yamamoto Tetsuya, Kurimoto Natsumi, Fukui Kunihiro, Yoshida Hideto	Classification Particle Mist	S-19	845
14:20– 14:40	W117	Preparation of LiFeBO3 by spray pyrolysis Sutou K., Taniguchi I.	LiFeBO3 Cathode Lithium batteries	S-19	365
(14:40–16:00) ( Nakazato T.)
14:40– 15:00	W118	Synthesis of magnetic fine particles by spray pyrolysis and application for hyperthermia Kinoshita Takuya, Furuyabu Takamitsu, Adachi Motoaki	Magnetic fine particle Spray pyrolysis Hyperthermia	S-19	805
15:00– 15:20	W119	Effect of solution concentration on ion generation by electrospray Maekawa Tetsuya, Seto Takafumi, Otani Yoshio, Higashi Hidenori, Tokumi Takuya	Electrospray Poly ethylene glycol Ion generation	S-19	780
15:20– 15:40	W120	Preparation of cathode materials of lithium sulfur batteries Handa Y., Taniguchi I.	Cathode Lithium sulfur batteries Ball milling	S-19	381
15:40– 16:00	W121	Synthesis and size control of MgF2 hollow nanoparticles by liquid phase method Umemoto Ryouhei, Nandiyanto Asep, Ogi Takashi, Okuyama Kikuo	magnesium fluoride hollow nanoparticles liquid phase method	S-19	152
(16:00–18:00) ( Kinoshita T., Maekawa T.)
16:00– 16:20	W122	Production of powder materials derived from sol-gel transitions Kaide A., Saeki T.	Gelling time Specific surface area Pore volume	S-19	503
16:20– 16:40	W123	Synthesis of non-aggregated nickel nanoparticles in gas phase Taniguchi Tetsuya	nickel nanoparticles non-aggregation electric furnace	S-19	219
16:40– 17:00	W124	Zeolite synthesis from coal fly ash and biomass ash with hydrothermal treatment method Tsu T., Fukui K., Yamamoto T., Yoshida H.	Coal fly ash Biomass ash Zeolite	S-19	639
17:00– 17:20	W125	Grindability at Roller mill and combustion characteristic at PC furnace for low HGI bituminous coal Ikeda M., Nakajima A., Ishikawa T., Shirai H.	Low HGI coal Roller mill Pulverized coal combustion	S-19	9
17:20– 17:40	W126	Effect of additives on the properties of cellulose nanofibers prepared by disk mill Kawabata K., Ono F., Fujii E.	Cellulose nanofiber disk mill additive	S-19	213
17:40– 18:00	W127	Influence of surface properties on the viscosity of the slurry suspended surface modified fine particles Katsumoto T., Yoshida Y., Shimosaka A., Shirakawa Y., Hidaka J.	surface modification slurry viscosity	S-19	735
Hall W, Day 2
(9:00–10:00) ( Seto T.)
9:00– 9:20	W201	Microscopic observation of fine particles on a vibrating plate and analysis of transport property by dynamic model Kobayakawa M, Yasuda M, Matsusaka S	fine particle vibration agglomerate	S-19	242
9:20– 9:40	W202	Characterization of contact charging of fine particles using vibration and electric field and study on charging control method Mizutani M, Yasuda M, Matsusaka S	Particle contact charging Vibration Electric field	S-19	254
9:40– 10:00	W203	Mixed state evaluation of composite material model using an acoustic propagation characteristic Kawarazaki Yuta, Oshitani Jun, Gotoh kuniaki, Yoshida Mikio	Acoustic propagation characteristic Mixed state Composite material	S-19	380
(10:00–11:00) ( Yoshida M.)
10:00– 10:20	W204	Examination of the performance enhancement of the louver classifier Higashino Motoharu, Yoshida Hideto, Yamamoto Tetuya	louver classifier	S-19	221
10:20– 10:40	W205	Effect of inlet free air on particle separation performance of gas-cyclone Yoshida Hideto, Takeda Naohiro, Yamamoto Tetuya, Fukui Kunihiro	Particle classification Gas-cyclone Collection efficiency	S-19	522
10:40– 11:00	W206	Recovery of zinc component from cupola dust with using the classifier Inoue A., Fukui K., Yamamoto T., Yoshida H.	zinc cupola dust classification	S-19	125
(11:00–12:00) ( Yoshida H.)
11:00– 11:20	W207	Characterization and application of nanoparticle film generated by low-pressure impactor Kojima Shota, Seto Takafumi, Otani Yoshio, Uchida Tetsuya, Sakiyama Kaname, Yoshizumi Kiyoshi, Shikida Takasuke	Low pressure impactor Laser ablation Li-ion battery	S-19	764
11:20– 11:40	W208	2-dimentional patterning of nanoparticles onto polymer film by electrostatic deposition Ushio Takaaki, Fukumori Kanta, Seto Takafumi, Otani Yoshio	Nanoparticle Electrical field Deposition	S-19	407
11:40– 12:00	W209	Effect of ratio of hypothetical capillary radius to electric double-layer thickness on electroosmotic flow rate through particle packed bed Asano Y., Takase H., Sakurai T.	electroosmotic flow rate electric double-layer particle packed bed	S-19	765

Technical program
SCEJ 45th Autumn Meeting (Okayama, 2013)

© 2013 The Society of Chemical Engineers, Japan. All rights reserved.
Most recent update: 2013-08-20 14:03:53
For more information contact Organizing Committee, SCEJ 45th Autumn Meeting (Okayama, 2013)
E-mail: inquiry-45f

www3.scej.org

This page was generated by