Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall Q, Day 1 | |||||
(9:00–10:00) (Chair: Kamio E.) | |||||
Q101 | Development of novel water vapor permselective membrane via pore-filling technique | Ventilator system Pore-filling membrane Water vapor / CO2 permselectivity | S-33 | 366 | |
Q102 | Evaluation of ion adsorption membrane prepared by using nanofiber as a matrix | functionalized membrane nanofiber ion adsorption | S-33 | 988 | |
Q103 | Permeation properties of cellulose acetate composite membranes containing cyclodextrins | cyclodextrin cellulose acetate composite membrane | S-33 | 993 | |
(10:00–11:00) (Chair: Yoshioka T.) | |||||
Q104 | Fabrication of a tough ion-gel film with excellent CO2 permeability (Grad. Sch. of Eng. Kobe U./MaF Tech. Ctr.) Yasui Tomoki, | CO2 separation membrane Ion-gel interpenetrating polymer network structure | S-33 | 595 | |
Q105 | Effect of HI-I2-H2O mixture concentration on H+ permeability of ion-exchange membrane | Ion-exchange membrane Hydriodic acid Proton permeability | S-33 | 602 | |
Q106 | Molecular modeling of transport mechanism of negative ion in hydrocarbon type polymer electrolyte | Alkaline fuel cell Molecular simulation Polymer | S-33 | 423 | |
(11:00–12:00) (Chair: Ohashi H.) | |||||
Q107 | Effects of the structure of inorganic porous hollow fiber membrane on CO2 desorption rate in a membrane flash process | chemical absorption pressure reduction CO2 stripping | S-33 | 528 | |
Q108 | Alternative CO2 capture by an electrochemical method (International Inst. Carbon-Neutral Energy Res. (I2CNER), Kyushu U.) Taniguchi Ikuo, | CO2 capture membrane electrodialysis | S-33 | 117 | |
Q109 | Development of high porosity porous polyimide production process | porous flexible film | S-33 | 96 | |
(13:00–14:00) (Chair: Takaba H.) | |||||
Q113 | Micropore Filling Phase Permeation of a Condensable Vapor in Silica Membranes: A Molecular Dynamics Study | silica membrane gas permeation micropore filling | S-33 | 59 | |
Q114 | Effect of pore surface properties on liquid phase permeation characteristics in nano-pores : Molecular dynamics study | molecular dynamics nanofiltration viscous flow | S-33 | 262 | |
Q115 | Development of hydrogen-selective silica membrane and its application for ethane dehydrogenation reaction | Silica membrane Defect-free Membrane reactor | S-33 | 747 | |
(14:00–15:00) (Chair: Akamatsu K.) | |||||
Q116 | Effects of carbon precursors on gas permeations characteristics of reactive thermal CVD Carbon-SiO2 membranes | CVD carbon gas permeation | S-33 | 265 | |
Q117 | Hydrogen separation from organic chemical hydrides using carbon hollow fiber membranes | Carbon membrane Hydrogen separation Organic chemical hydrides | S-33 | 977 | |
Q118 | Amorphous carbon molecular sieve membranes prepared by plasma-enhanced CVD | plasma-enhanced CVD amorphous carbon membrane molecular sieve membrane | S-33 | 271 | |
(15:00–16:00) (Chair: Yoshimune M.) | |||||
Q119 | Preparation and characterization of thermally stable SiOC membranes derived by hydrosilylatioln | hydrosilylation thermal stability hydrogen separation | S-33 | 274 | |
Q120 | Influence of hydrophobic functional groups for separation performance of hydrophobic silica membranes | Pervaporation Hydrophobicity Silica | S-33 | 895 | |
Q121 | Preparation of metal doped organic-inorganic hybrid membranes for C3H6/C3H8 separation | sol-gel method organic-inorganic hybrid membrane metal doped | S-33 | 329 | |
(16:00–17:00) (Chair: Seshimo M.) | |||||
Q122 | (withdrawn) | 100 | 937 | ||
Q123 | Organosilica membranes derived from bridged alkoxides with different organic linking units: permeation properties and new type coating fabrication. | organosilica membranes permeation properties bridged alkoxides | S-33 | 486 | |
Q124 | Mass transfer characteristic in forward osmosis membrane for concentration of latex particles | Latex Particles Forward Osmosis Membrane Separation | S-33 | 698 | |
Hall Q, Day 2 | |||||
(9:00–10:00) (Chair: Nakamura K.) | |||||
Q201 | Suppression of particles deposition onto membrane surfaces in cross-flow microfiltration under high flow rate and low pressure conditions | cross-flow microfiltration particle | S-33 | 495 | |
Q202 | Development of filtration performance simulation technology for MF/UF hollow fiber membrane module | microfiltration ultrafiltration hollow fiber membrane | S-33 | 13 | |
Q203 | Effects of pore structure on membrane separation process of particle dispersions | microfiltration Phase field model Direct numerical simulation | S-33 | 720 | |
Hall Q, Day 3 | |||||
(9:00–10:00) (Chair: Kanezashi M.) | |||||
Q301 | Methanol separation through Na-ZSM-5 membrane under pressurized conditions | ZSM-5 membrane separation methanol mixture | S-33 | 415 | |
Q302 | Development of zeolite filtration membranes by using carbon fibers | zeolite filtration membrane carbon fiber water treatment | S-33 | 8 | |
Q303 | Development of Hybrid System of High-temperature Ethanol Fermentation and Zeolite Membrane Separation | Zeolite membrane Hightemperature ethanol fermentation Hybrid system | S-33 | 393 | |
(10:00–11:00) (Chair: Nomura M.) | |||||
Q304 | Xylene isomer separation properties of silicalite-1 membrane under pressurized conditions | silicalite-1 zeolite membrane separation pressurized conditions | S-33 | 412 | |
Q305 | Effect of seed crystals on the separation properties of MFI zeolite membranes | membrane zeolite pervaporation | S-33 | 982 | |
Q306 | Preparation of *BEA-type zeolite membrane without using organic structure directing agent. | *BEA zeolite membrane separation OSDA-free synthesis | S-33 | 413 | |
(11:00–12:00) (Chair: Kumakiri I.) | |||||
Q307 | Propylene/propane separation properties of the zeolitic imidazolate framework-8 membranes (Nat. Inst. Adv. Ind. Sci. and Tech.(AIST)) Hara Nobuo, | Gas separation membrane Zeolitic imidazolate framework-8 Propylene/propane separation | S-33 | 447 | |
Q308 | Development of non-destructive measurement technique for adsorption on zeolite membrane | Zeolite membrane Adsorption Structure analysis | S-33 | 414 | |
Q309 | Fabrication of defect-free Pd-Cu alloy membrane supported on sintered metal and its hydrogen permeability | Hydrogen separation Membrane Defect-free | S-33 | 660 |