SCEJ 47th Autumn Meeting (Sapporo, 2015): Hall and day program

`SCEJ 47th Autumn Meeting (Sapporo, 2015)`

Hall and day program

Hall S

Most recent update: 2015-08-26 10:00:42

Day 1
Time	Paper ID	Title / Authors	Keywords	Topic code	Ack. number
SCEJ Division session SE-13. <Progress in Innovative Powder & Particle Process Technology -Fundamental Phenomena and Science, Unit Operation and Its Application ->
(13:00–14:40) (Chair: Noda R., Yoshida H.)
13:00– 13:20	S113	Dimensionless correlating equations estimating pressure drop and particle penetration of bag filter. (NITech) *Hatayama H., Tada Y., Ikeno H., Ito M.	bag filter pressure drop particle penetration	SE-13	321
13:20– 13:40	S114	Discussion about the optimum design conditions for scale-up of bag filter (NITech) *Ito M., Tada Y., Ikeno H., Hatayama H.	bag filter scale-up optimum design condition	SE-13	323
13:40– 14:00	S115	Control of fluidization quality for the reaction involving gas-volume reduction in a fluidized catalyst bed (Kagoshima U.) *Kai T., Tanaka N., Nakazato T., Mizuta K., (IPEC) Nakajima M.	fluidized bed defluidization feedforward control	SE-13	99
14:00– 14:20	S116	Effect of a mechanical vibration on initial bubbling behavior in a gas-solid fluidized bed (Kyutech) *Mawatari Yoshihide, Komori Yoshiro, Yamamura Masato, Kage Hiroyuki	$BN.F0AX(B $B?6F0(B $B5$K"(B	SE-13	923
14:20– 14:40	S117	[Outstanding Paper Award] Mechanism of the Initial Phenomena of Defluidization Caused by Switching Fluidizing Gases (Kagoshima U.) *Kai Takami, Hirano Yuki, Nakazato Tsutomu, Mizuta Kei	fluidized bed defluidization non-equimolar diffusion	SE-13	7
(15:00–17:00) (Chair: Kai T., Mawatari Y.)
15:00– 15:20	S119	[Outstanding Paper Award] Effect of Solution Concentration on Breakup of Electro-sprayed Droplets and Emission of Solute Ions (Panasonic) Maekawa Tetsuya, (Kanazawa U.) Tokumi Takuya, *Higashi Hidenori, Seto Takafumi, Otani Yoshio	Electrospray Ion Generation Nano Particle	SE-13	64
15:20– 15:40	S120	Synthesis of LiCoPO4 by spray pyrolysis and its morphology control (Tokyo Tech) *Taguchi Tomofumi, Taniguchi Izumi	LiCoPO4 Cathode Lithium battery	SE-13	817
15:40– 16:00	S121	Particle separation performance by revised hydro-cyclone (Hiroshima U.) *Yoshida H., Oshikawa T., Fukui K., Fukasawa T.	Hydro-cyclone Separation performance Particle size	SE-13	435
16:00– 16:20	S122	Investigation on the component separation of woody biomass incineration ash (Hiroshima U.) *Katakura T., Fukasawa T., Yoshida H., Fukui K.	Woody biomass incineration ash Size classification Component separation	SE-13	125
16:20– 16:40	S123	Recycling to Zeolite from coal fly ash and biomass ash with hydrothermal treatment method (Hiroshima U.) *Fukui K., Tsu T., Fukasawa T., Yoshida H.	Coal fly ash Biomass incineration ash Zeolite	SE-13	123
16:40– 17:00	S124	Reduction of formaldehyde emission from plywood adhesive filling surface modified shells (Muroran Inst. Tech.) *Magara K., (Forest Products Res. Inst.) Hirabayashi Y., (Muroran Inst. Tech.) Yamanaka S., Fujimoto T., Kuga Y.	Scallop shell Plywood adhesive Grinding	SE-13	794
Day 2
Time	Paper ID	Title / Authors	Keywords	Topic code	Ack. number
SCEJ Division session SE-13. <Progress in Innovative Powder & Particle Process Technology -Fundamental Phenomena and Science, Unit Operation and Its Application ->
(9:00–10:20) (Chair: Fukui K., Iwasaki T.)
9:00– 9:20	S201	[Outstanding Paper Award] Development of a New Apparatus for Evaluating Flowability of Particle with Poor Flow Behavior (Okayama U.) *Yoshida M., Furue N., Oshitani J., Gotoh K.	poor powder flowability new Apparatus drained angle	SE-13	28
9:20– 9:40	S202	Real-time measurement of particle deposition from the gas-phase onto different surfaces (TUAT) *Takagi Azusa, Faizal Ferry, Lenggoro Wuled	aerosol deposition measurement	SE-13	958
9:40– 10:00	S203	Evaluation of packing structure and electrical conductivity of packed bed (Muroran Inst. Tech.) *Sugano M., Fujimoto T., Yamanaka S., Kuga Y.	packing structure packed bed electrical conductivity	SE-13	658
10:00– 10:20	S204	Investigation for the effect of powder characteristics on the compression-speed (Okayama U.) *Takaichi T., Yoshida M., Oshitani J., Gotoh K.	tablet strength powder characteristics nano and micro particles	SE-13	633
(10:40–12:00) (Chair: Ishihara S., Fujimoto T.)
10:40– 11:00	S206	Fine Dust Generation in Grinding Process of CNT-Polymer Composite Material. (Okayama U.) *Okayama C., Yoshida M., Oshitani J., Gotoh K., (AIST) Ogura I.	Dust generation Composite material Nanoparticle	SE-13	139
11:00– 11:20	S207	Mechanochemical preparation of Fe-bearing layered double hydroxides based on solubility product of metal hydroxides (Osaka Pref. U.) *Iwasaki T., Tomisawa M., Watano S.	layered double hydroxide mechanochemical synthesis ball-milling	SE-13	122
11:20– 11:40	S208	Effect of polymer dispersants by bead milling of high concentration limestone slurry. (Yamagata U.) *Ishizawa H., Kimata M., (Ashizawa Finetech) Tamura T., (Yamagata U.) Hasegawa M.	Limestone Grinding Polymer dispersant	SE-13	753
11:40– 12:00	S209	Mixed Oxide Composite Formation Process Using Planetary Ball Milling and Its Application for Zeolite Synthesis (U. Tokyo) *Iida Takayuki, Okubo Tatsuya, Wakihara Toru	Mechanochemical processing Composite formation Zeolite crystallization	SE-13	529
(13:00–14:40) (Chair: Kimata M., Yoshida M.)
13:00– 13:20	S213	Metal recovery of automotive circuit board by grinding (Yamagata U.) *Saitou R., Kimata M., (Yamagata Automobile Recycle Center) Togashi A., (Yamagata U.) Hasegawa M.	Metal recovery Circuit board Grinding	SE-13	800
13:20– 13:40	S214	Estimation of particles size distribution in ball milling using DEM simulation and multi classification analysis (Waseda U.) *Fukui Sho, Tsunazawa Yuki, Tokoro Chiharu	DEM simulation grinding particle size distribution	SE-13	98
13:40– 14:00	S215	Evaluation of Particle Size Distribution Effect for Mixing Behaviour in a Rotating Drum by DEM (Sumitomo Bakelite/Tohoku U.) *Yamamoto Michinori, (IMRAM, Tohoku U.) Ishihara Shingo, Kano Junya	DEM simulation Particle Size distribution Segregation	SE-13	110
14:00– 14:20	S216	Modeling of the analysis for elastic-plastic materials using ADEM (Tohoku U.) *Ishihara S., Kano J.	Advanced DEM Breakage elastic-plastic	SE-13	249
14:20– 14:40	S217	Numerical analysis of particle behavior in a flow channel modeling primary air flow inside a pulverized coal burner (CRIEPI) *Yamamoto A., Shirai H.	Pulverized coal burner Particle concentrator Numerical analysis	SE-13	776
SCEJ Division session SE-7. <Frontier of Biomass Conversion Technology Using Biochemistry and Thermochemistry>
(15:00–16:00) (Chair: Matsumura Y., Murakami K.)
15:00– 15:20	S219	Evaluation of clay catalysts for biomass fluid catalytic cracking gasification (Gunma U.) *Sun Yan, Noda Reiji	biomass clay catalysts fluid catalytic cracking gasification	SE-7	119
15:20– 15:40	S220	Evaluation of FT synthesis catalyst for aviation fuel production from woody biomass (Gifu U.) *Iio Toshiki, Kumabe Kazuhiro, Moritomi Hiroshi	Woody biomass Aviation fuel FT synthesis catalyst	SE-7	797
15:40– 16:00	S221	Upgrading of bio-oil model compound using solid acid catalyst (Akita U.) *Nakamura Ayano, Oga Takahiro, Murakami Kenji	bio-oil mesoporous silica alumina upgrading	SE-7	83
(16:00–17:00) (Chair: Noda R.)
16:00– 16:20	S222	Liquefaction of biomass by solvolysis (Shinshu U.) *Kobayashi Yutaka, Shimada Iori, Osada Mitsumasa, Fukunaga Hiroshi, Takahashi Nobuhide, (Euglena) Ohta Haruhisa, (Chiyoda) Takatsuka Toru	woody biomass solvolysis liquefaction	SE-7	401
16:20– 16:40	S223	Bio-oil deoxygenation in two-stage upgrading with mesoporous silica-alumina and zeolite (Akita U.) *Oga Takahiro, Nakamura Ayano, Murakami Kenji	bio-oil catalyst deoxygenation	SE-7	75
16:40– 17:00	S224	Influence of reaction conditions on steam co-gasification of low-rank coal and iron-loaded biochar (Akita U.) *Shen Lingbo, Murakami Kenji	gasification low rank coal biomass	SE-7	72
Day 3
Time	Paper ID	Title / Authors	Keywords	Topic code	Ack. number
SCEJ Division session SE-7. <Frontier of Biomass Conversion Technology Using Biochemistry and Thermochemistry>
(9:00–10:20) (Chair: Kanna M.)
9:00– 9:20	S301	Hybrid nanocellulosome: high functional endoglucanase design from nano-module library (Tohoku U.) Nakazawa Hikaru, Ishigaki Yuri, Okada Izumi, Murakami Keisuke, *Umetsu Mitsuo	cellulase biomass	SE-7	944
9:20– 9:40	S302	*Production of neoagarooligosaccharides by recombinant Brevibacillus* secreting agarase** (Miyagi U.) *Yanagisawa M., (Tokyo Tech.) Kashimura S., Syazni, (Kochi U. Tech.) Ariga O., (Tokyo Tech.) Nakasaki K.	Brevibacillus agarase neoagarooligosaccharides	SE-7	202
9:40– 10:00	S303	Production of bioethanol from neoagarobiose by recombinant yeast (Tokyo Tech.) Syazni, (Miyagi U.) *Yanagisawa M., (Kochi U. Tech.) Ariga O., (Tokyo Tech.) Nakasaki K.	bioethanol neoagarobiose recombinant yeast	SE-7	203
10:00– 10:20	S304	Decomposition kinetics of mannose, mannitol and mannuronic acid under hydrothermal condition (Hiroshima U.) *Mohamad Rozyanti, Aki Tsunehiro, Nakashimada Yutaka, Okamura Yoshiko, Tajima Takahisa, Matsumura Yukihiko	mannose mannitol biomass	SE-7	515
(10:40–12:00) (Chair: Matsumura Y.)
10:40– 11:20	S306	[Invited lecture] Efficient production of 2-deoxy-scyllo-inosose (a Precursor for Aromatic compounds) from biomass by metabolically engineered recombinant Escherichia coli (NUPALS) *Takaku Hiroaki, Yamazaki Harutake, (NBR) Oouchi Hideki, (NUPALS/NBR) Ishiguro Masaji, (NUPALS) Takagi Masamichi	2-deoxy-scyllo-inosose Escherichia coli biomass	SE-7	1005
11:20– 11:40	S308	Effective production of valuable chemicals from saccharides using solid acid catalyst (Kyoto U.) *Tanino Shohei, Muranaka Yosuke, (Kansai U.) Hasegawa Isao, (Kyoto U.) Maki Taisuke, Mae Kazuhiro	Biomass Solid acid catalyst Lewis and Brensted acid	SE-7	104
11:40– 12:00	S309	Synthesis of methyl levulinate from saccharides using solid acid catalyst (Kyoto U.) *Muranaka Yosuke, Nobuta Yusuke, (Kansai U.) Hasegawa Isao, (Kyoto U.) Maki Taisuke, Mae Kazuhiro	Methyl levulinate Solid acid catalyst Saccharides	SE-7	43
(13:00–14:40) (Chair: Machida H., Matsumura Y.)
13:00– 13:20	S313	Empirical model for enzymatic hydrolysis of steam exploded bagasse (JGC) *Ikeo Makoto, Okino Shohei, Oguro Syuichi, Taneda Daisuke	Biomass Enzymatic Hydrolysis Empirical model	SE-7	260
13:20– 13:40	S314	Saccharification rate improvement study by the hydrothermal explosion of the biomass (Nagoya U.) *Honda Y., Machida H., Horizoe H.	biomass bioethanol hydrothermal explosion	SE-7	614
13:40– 14:00	S315	Optimization of thermal-hydrolysis of bagasse using UCT-solvent (Osaka City U.) *Mori Y., Igarashi K., Ooshima H.	bagasse thermal hydrolysis lignin	SE-7	906
14:00– 14:20	S316	Cellulosic ethanol development (JGC) *Taneda Daisuke, Okino Shohei, Ikeo Makoto	cellulose ethanol enzyme	SE-7	49
14:20– 14:40	S317	Quantification of ethanol production rates using SSF (Hiroshima U.) *Sakimoto K., Kanna M., Matsumura Y.	Lignocellulosic biomass bioethanol	SE-7	669
(15:00–16:40) (Chair: Taneda D.)
15:00– 15:20	S319	Fractionation of lignocellulosic biomass components using formic acid and conversion of recovered components (Kyoto U.) *Mishima Kazuki, Muranaka Yosuke, (Kansai U.) Hasegawa Isao, (Kyoto U.) Maki Taisuke, Mae Kazuhiro	Biomass Formic acid Fractionation	SE-7	254
15:20– 15:40	S320	Optimization of organosolv treatment methods for effective fractionation of lignocellulosic biomass components (Kyoto U.) *Yamada Satoshi, Muranaka Yosuke, (Kansai U.) Hasegawa Isao, (Kyoto U.) Maki Taisuke, Mae Kazuhiro	organosolv treatment methods lignin fractionation	SE-7	117
15:40– 16:00	S321	Evaluation of lignin resin materials obtained by several pretreatment methods (Kyoto U.) *Hirooka Kousuke, Muranaka Yosuke, (Kansai U.) Hasegawa Isao, (Kyoto U.) Maki Taisuke, Mae Kazuhiro	lignin resin material pretreatment	SE-7	56
16:00– 16:20	S322	Hydrothermal reforming of lignin in alkaline aqueous solution for the conversion to phenols and fuel gas (Kyushu U.) *Kudo S., Nishioka S., Norinaga K., Hayashi J.-i.	Biomass Lignin Hydrothermal	SE-7	910
16:20– 16:40	S323	Lignocellulosic biomass refinery using ionic liquids (Kanazawa U.) *Ninomiya K., Kakuchi R., Endo T., Kuroda K., Noguchi M., (Kobe U.) Ogino C., (Kanazawa U.) Takahashi K.	Lignocellulose Ionic liquid biomass refinery	SE-7	922

Technical program
SCEJ 47th Autumn Meeting (Sapporo, 2015)

© 2015 The Society of Chemical Engineers, Japan. All rights reserved.
Most recent update: 2015-08-26 10:00:42
For more information contact Organizing Committee, SCEJ 47th Autumn Meeting (Sapporo, 2015)
E-mail: inquiry-47f

www3.scej.org

This page was generated by