Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
SCEJ Division session SE-13. <Progress in Innovative Powder & Particle Process Technology -Fundamental Phenomena and Science, Unit Operation and Its Application -> | |||||
(13:00–14:40) (Chair: Noda R., Yoshida H.) | |||||
S113 | Dimensionless correlating equations estimating pressure drop and particle penetration of bag filter. | bag filter pressure drop particle penetration | SE-13 | 321 | |
S114 | Discussion about the optimum design conditions for scale-up of bag filter | bag filter scale-up optimum design condition | SE-13 | 323 | |
S115 | Control of fluidization quality for the reaction involving gas-volume reduction in a fluidized catalyst bed | fluidized bed defluidization feedforward control | SE-13 | 99 | |
S116 | Effect of a mechanical vibration on initial bubbling behavior in a gas-solid fluidized bed | 流動層 振動 気泡 | SE-13 | 923 | |
S117 | [Outstanding Paper Award] Mechanism of the Initial Phenomena of Defluidization Caused by Switching Fluidizing Gases | fluidized bed defluidization non-equimolar diffusion | SE-13 | 7 | |
(15:00–17:00) (Chair: Kai T., Mawatari Y.) | |||||
S119 | [Outstanding Paper Award] Effect of Solution Concentration on Breakup of Electro-sprayed Droplets and Emission of Solute Ions | Electrospray Ion Generation Nano Particle | SE-13 | 64 | |
S120 | Synthesis of LiCoPO4 by spray pyrolysis and its morphology control | LiCoPO4 Cathode Lithium battery | SE-13 | 817 | |
S121 | Particle separation performance by revised hydro-cyclone | Hydro-cyclone Separation performance Particle size | SE-13 | 435 | |
S122 | Investigation on the component separation of woody biomass incineration ash | Woody biomass incineration ash Size classification Component separation | SE-13 | 125 | |
S123 | Recycling to Zeolite from coal fly ash and biomass ash with hydrothermal treatment method | Coal fly ash Biomass incineration ash Zeolite | SE-13 | 123 | |
S124 | Reduction of formaldehyde emission from plywood adhesive filling surface modified shells | Scallop shell Plywood adhesive Grinding | SE-13 | 794 |