Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
SCEJ Division session SE-13. <Progress in Innovative Powder & Particle Process Technology -Fundamental Phenomena and Science, Unit Operation and Its Application -> | |||||
(9:00–10:20) (Chair: Fukui K., Iwasaki T.) | |||||
S201 | [Outstanding Paper Award] Development of a New Apparatus for Evaluating Flowability of Particle with Poor Flow Behavior | poor powder flowability new Apparatus drained angle | SE-13 | 28 | |
S202 | Real-time measurement of particle deposition from the gas-phase onto different surfaces | aerosol deposition measurement | SE-13 | 958 | |
S203 | Evaluation of packing structure and electrical conductivity of packed bed | packing structure packed bed electrical conductivity | SE-13 | 658 | |
S204 | Investigation for the effect of powder characteristics on the compression-speed | tablet strength powder characteristics nano and micro particles | SE-13 | 633 | |
(10:40–12:00) (Chair: Ishihara S., Fujimoto T.) | |||||
S206 | Fine Dust Generation in Grinding Process of CNT-Polymer Composite Material. | Dust generation Composite material Nanoparticle | SE-13 | 139 | |
S207 | Mechanochemical preparation of Fe-bearing layered double hydroxides based on solubility product of metal hydroxides | layered double hydroxide mechanochemical synthesis ball-milling | SE-13 | 122 | |
S208 | Effect of polymer dispersants by bead milling of high concentration limestone slurry. | Limestone Grinding Polymer dispersant | SE-13 | 753 | |
S209 | Mixed Oxide Composite Formation Process Using Planetary Ball Milling and Its Application for Zeolite Synthesis | Mechanochemical processing Composite formation Zeolite crystallization | SE-13 | 529 | |
(13:00–14:40) (Chair: Kimata M., Yoshida M.) | |||||
S213 | Metal recovery of automotive circuit board by grinding | Metal recovery Circuit board Grinding | SE-13 | 800 | |
S214 | Estimation of particles size distribution in ball milling using DEM simulation and multi classification analysis | DEM simulation grinding particle size distribution | SE-13 | 98 | |
S215 | Evaluation of Particle Size Distribution Effect for Mixing Behaviour in a Rotating Drum by DEM | DEM simulation Particle Size distribution Segregation | SE-13 | 110 | |
S216 | Modeling of the analysis for elastic-plastic materials using ADEM | Advanced DEM Breakage elastic-plastic | SE-13 | 249 | |
S217 | Numerical analysis of particle behavior in a flow channel modeling primary air flow inside a pulverized coal burner | Pulverized coal burner Particle concentrator Numerical analysis | SE-13 | 776 | |
SCEJ Division session SE-7. <Frontier of Biomass Conversion Technology Using Biochemistry and Thermochemistry> | |||||
(15:00–16:00) (Chair: Matsumura Y., Murakami K.) | |||||
S219 | Evaluation of clay catalysts for biomass fluid catalytic cracking gasification | biomass clay catalysts fluid catalytic cracking gasification | SE-7 | 119 | |
S220 | Evaluation of FT synthesis catalyst for aviation fuel production from woody biomass | Woody biomass Aviation fuel FT synthesis catalyst | SE-7 | 797 | |
S221 | Upgrading of bio-oil model compound using solid acid catalyst | bio-oil mesoporous silica alumina upgrading | SE-7 | 83 | |
(16:00–17:00) (Chair: Noda R.) | |||||
S222 | Liquefaction of biomass by solvolysis | woody biomass solvolysis liquefaction | SE-7 | 401 | |
S223 | Bio-oil deoxygenation in two-stage upgrading with mesoporous silica-alumina and zeolite | bio-oil catalyst deoxygenation | SE-7 | 75 | |
S224 | Influence of reaction conditions on steam co-gasification of low-rank coal and iron-loaded biochar | gasification low rank coal biomass | SE-7 | 72 |