Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall ZC, Day 2 | |||||
ZC2P01 | Study on selective recovery of precious metals by continuous counter-current foam separation with solvent extractants (Nagoya Municipal Ind. Res. Inst.) *Kinoshita Takehiko, | Foam separation Precious metals Solvent extractants | SE-20 | 755 | |
ZC2P02 | Adsorption equilibrium of precious metals with newly adsorption resins | adsorption precious metal | SE-20 | 388 | |
ZC2P03 | Separation of cesium by synthesized Prussian blue analogs | Cesium adsorption Prussian blue ferrocyanide metal compound | SE-20 | 777 | |
ZC2P04 | Adsorption and recovery of Cd by Chromatographic Agent coating TPEN-NIPA-Gel with high TPEN content | Extraction Chromatography Polymer gel Adsorption | SE-20 | 508 | |
ZC2P05 | Development of Crown Ether-NIPA Gel for Absorption of Strontium | Crown Ether Copolymer Gel Strontium Adsorption | SE-20 | 799 | |
ZC2P06 | Preparation of highly porous chitosan microspheres with aminophenol and its adsorption properties for precious metals | Chitosan Adsorption Precious metal | SE-20 | 694 | |
ZC2P07 | Synthesis of novel chitosan derivative and its adsorption selectivity for precious metals and rare metals | chitosan adsorption rare metals | SE-20 | 902 | |
ZC2P08 | Synthesis of chitosan derivatives introduced citric acid and imidazole and development of separation and recovery techniques of selenium, arsenic and antimony. | chitosan selective adsorption toxic metals | SE-20 | 680 | |
ZC2P09 | Extraction selectivity for antimony and arsenic with dialkylated piperazine derivative. | extraction antimony arsenic | SE-20 | 641 | |
ZC2P10 | Synthesis of aminophosphonic acid extractant and effect of amino basicity on their extraction selectivities for indium(III), gallium(III) and zinc(II). | extraction rare metals separation | SE-20 | 697 | |
ZC2P11 | Extraction properties of precious metals with novel amide acid type extractant | recycle precious metals solvent extraction | SE-20 | 63 | |
ZC2P12 | Biosorption of heavy metal ions by onion skin and marine green alga, Ulva pertusa Kjellman. | biosorption onion skin marine green alga | SE-20 | 268 | |
ZC2P13 | Foam separation of proteins from milk whey | Foam separation Whey proteins Adsorption | SE-20 | 263 | |
ZC2P14 | Oxidation of adsorbed nitrogen monoxide on zeolite | zeolite NOx Nitrogen monoxide | SE-20 | 67 | |
ZC2P15 | Simple synthetic method and carbon dioxide capture of cerium oxide | adsorption CO2 capture ceria | SE-20 | 739 | |
ZC2P16 | Theoretical study on the CO2 absorption mechanisms of ethylene glycol-based solvents | CO2 solubility molecular dynamics physical solvent | SE-20 | 448 | |
ZC2P17 | Equilibrium capacity and kinetics for the CO2 absorption by formate ionic liquids | ionic liquid carbon dioxide absorption | SE-20 | 866 | |
ZC2P18 | Selective hydrocarbon separation from H2/hydrocarbon mixture using an ionic liquid membrane | ionic liquids supported liquid membrane organic hydride | SE-20 | 488 | |
ZC2P19 | Preparation of Amine Modified Bimodal Mesoporous Silica Particles for CO2 separation | CO2 adsorption Polyethyleneimine Bimodal mesoporous silica | SE-20 | 586 | |
ZC2P20 | Effect of synthesis and template removal condition on the quality of mesoporous silica membrane | mesoporous silica membrane template removal condition solvent extraction | SE-20 | 648 | |
ZC2P21 | CO2 adsorption property of Core-Shell structured MFI-type zeolite in wet condition | MFI-type zeolite Core-Shell CO2 adsorption | SE-20 | 715 | |
ZC2P22 | Preparation of hydrophobic *BEA type zeolite membrane | zeolite membrane separation *BEA zeolite | SE-20 | 505 | |
ZC2P23 | Preparation and property evaluation of Mixed Matrix Membrane | polymer cyclodextrin zeolite | SE-20 | 113 | |
ZC2P24 | Permeation properties through ZSM-5 membrane prepared from fluoride ion containing system | zeolite membrane pervaporation fluoride | SE-20 | 417 | |
ZC2P25 | Effect of support pore size on the separation property of MFI zeolite membranes | zeolite membrane gas separation | SE-20 | 635 | |
ZC2P26 | High speed acetic acid concentration through zeolitic membranes | MFI zeolite membrane porous silica substrate acetic acid condensation | SE-20 | 326 | |
ZC2P27 | Fabrication of LCST type phase transition ionic liquids with high osmotic pressure and apply to FO process | ionic liquid membrane separation osmotic pressure | SE-20 | 838 | |
ZC2P28 | Fabrication of TFC forward osmosis hollow fiber membrane and evaluation of there membrane flux performance | Forward osmosis Hollow fiber NIPS | SE-20 | 540 | |
ZC2P29 | Effect of operating condition on the efficiency of power generation in pressure-retarded-osmosis | Pressure retarded osmosis Membrane module Operating condition | SE-20 | 638 | |
ZC2P30 | A study on the permeation behavior of particle dispersion in porous media by using coupled LBM-DEM simulation | Lattice Boltzmann Method Smoothed Profile Method DEM | SE-20 | 566 | |
ZC2P31 | QCM-D analysis of effects on prevention of membrane fouling using fine bubbles | fine bubble membrane fouling QCM-D | SE-20 | 602 | |
ZC2P32 | Effect of chemically enhanced backwash with low-concentrated sodium hypochlorite solution on mitigating membrane fouling | membrane fouling chemically enhanced backwash NaClO | SE-20 | 637 | |
ZC2P33 | Effect of hydrophilic polymers immobilized onto reverse osmosis membranes on anti-fouling property | Reverse osmosis membrane Hydrophilic polymer Anti-fouling | SE-20 | 541 | |
ZC2P34 | Filtration characteristics of PLLA membranes prepared with the aid of a surfactant | PLLA porous membrane surfactant depth filter | SE-20 | 209 | |
ZC2P35 | Ion transport of Li and Co through mono-valent cation selective membrane in electrodialysis | mono-valent cation selective membrane electrodialysis Li | SE-20 | 773 | |
ZC2P36 | Partitioning Behavior of Chiral Ibuprofen Molecules at Microdomain of Liposome Membrane | Membranome Heterogeneous Liposome Ibuprofen | SE-20 | 882 | |
ZC2P37 | Performance evaluation of functional membrane for specifically capture the ful virus by radiation-induced graft polymerization | radiation-induced graft polymerization Polymer brush The sugar chain cluster effect | SE-20 | 368 | |
ZC2P38 | Development of functional membrane to recognize porcine epidemic diarrhea virus | Porcine epidemic diarrhea virus Aminopeptidase N Polymer brush | SE-20 | 666 | |
ZC2P39 | Removal of trimethylsilanol using the catalytic reaction | Radiation-induced graft polymerization Trimethylsilanol Dimerization | SE-20 | 918 | |
ZC2P40 | Effect of long-chain saturated fatty acid salt on the foaming property of firefighting agent | fatty acid water hardness foaming property | SE-20 | 651 | |
ZC2P41 | Continuous separation of MEF and iPS cells using dielectrophoresis device with inclined comb-shaped electrode | Dielectrophoresis iPS cell | SE-20 | 332 | |
ZC2P42 | Analysis of the electrical characteristics of differentiation and undifferentiated iPS cells using the dielectrophoresis phenomenon. | dielectrophoresis iPS cell | SE-20 | 333 | |
ZC2P43 | Continuous separation properties of insulating plate type dielectrophoresis device with slit using DC bias AC voltage | dielectrophoresis | SE-20 | 336 | |
ZC2P44 | Modification of filter cake properties by use of fine-bubble-bodyfeeding | Dead-end filtration Fine bubble Cake property | SE-20 | 507 | |
ZC2P45 | Expression of solid and polymer aqueous solution mixture | non-Newtonian fluids expression analytical solution | SE-20 | 733 | |
ZC2P46 | The relation between turbidity removal and the transient adsorption of cationic polymeric flocculant on the suspended particles | flocculation turbidity removal polymeric flocculant | SE-20 | 774 | |
ZC2P47 | Effects of various operating conditions on characteristics of constant rate dynamic filtration applying rotation and jet flow | dynamic filtration filtration pressure operating condition | SE-20 | 949 | |
ZC2P48 | Study on the improvement of dry deSOx performance of low temperature by MnO2 having high specific surface area | Dry DeSOx filter MnO2 Low temperature | SE-20 | 636 | |
ZC2P49 | Energy saving analysis of heat-integrated thermally coupled reactive distillation | Reactive distillation Heat integration Process Design | SE-20 | 650 | |
ZC2P50 | Analysis of hydrate decomposition process by heat balance in hydrate recovery vessel | Gas hydrate Gas separation Heat balance | SE-20 | 875 | |
ZC2P51 | Cooling operation of the pseudo biodiesel using a static mixer | Biodiesel Static mixer Winterization | SE-20 | 876 | |
ZC2P52 | Effect of hydrophobic functional groups of silica adsorbent of organic adsorption properties | Hansen solubility parameter adsorption silica | SE-20 | 845 | |
ZC2P53 | Solvent design using a Hansen solubility parameter for d-limonene extraction from orange peel | Hansen solubility parameter Extraction limonene | SE-20 | 857 | |
ZC2P54 | Separation and extraction of lipids from wet microorganism Aurantiochytrium limacinum using liquefied dimethyl ether | dimethyl ether extraction Aurantiochytrium | SE-20 | 567 | |
ZC2P55 | Oil Separation from Chaeroceros Gracilis by Hydrothermal Reaction of Steam Ejector | Biodiesel Chaeroceros Gracilis Steam Ejector | SE-20 | 720 | |
ZC2P56 | Continuous Decompress Flotation Thickening System for Sewage Sludge using Steam Ejector | Sewage Sludge Decompress Flotation Thickening Steam Ejector | SE-20 | 642 |