Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall P, Day 1 | |||||
(9:00–10:20) (Chair: Kanda A., Sugioka K.-i.) | |||||
P101 | Experimental study of the sintering of carbon nano particle | sintering soot SMPS | SE-22 | 55 | |
P102 | Influence of Oxide Addition of Electrode on Droplet Ejection in Multi-Phase AC Arc | Thermal Plasma Multi-Phase AC Arc Electrode Erosion | SE-22 | 276 | |
P103 | Combustion characteristics of methane-hydrogen mixture laminar diffusion flame with oxygen-enriched air | Oxygen-enriched combustion Hydrogen addition Diffusion flame | SE-22 | 409 | |
P104 | Partial Oxidation Reforming of Biogas in Microwave-induced Non-equilibrium Plasma-assisted Combustion | Plasma-assisted combustion Partial oxidation reforming Biogas | SE-22 | 557 | |
(10:40–11:20) (Chair: Tanaka M.) | |||||
P106 | Effect of supper-heating effect under microwave irradiation on nano-particle formation | microwave nanoparticle superheat | SE-22 | 94 | |
P107 | Facile Microwave-Assisted Hydrothermal Synthesis of Copper Nanowire | Microwave Hydrothermal synthesis Copper nanowire | SE-22 | 924 | |
(11:20–12:00) (Chair: Asakuma Y.) | |||||
P108 | [Keynote lecture] Studies of microwave effect and character for chemical reactions | Microwave Chemical reaction Enzymatic reaction | SE-22 | 377 | |
(13:00–13:40) (Chair: Hidema R.) | |||||
P113 | [Keynote lecture] Thermal-hydraulic Study for Accelerator-Driven System | Lead-bismuth ADS Spallation target | SE-22 | 378 | |
(13:40–14:40) (Chair: Odashima S.) | |||||
P115 | Development of PCM heat storage body encapsulated in ceramic shell | Ceramics PCM Heat storage body | SE-22 | 533 | |
P116 | Fabrication of hard shell silica microcapsule containing phase change material | Latent heat Microcapsule Phase change material | SE-22 | 737 | |
P117 | Absorption liquid film heat and mass transfer on the inner wall of a spiral tube in absorption heat pump | Absorption heat pumps Lithium bromide Mass transfer coefficient | SE-22 | 738 | |
(15:00–16:00) (Chair: Marumo K.) | |||||
P119 | Study on the cause of damage and durability increase of adsorbent in the adsorption heat pump for generation steam. | heat pump adsorbent durability | SE-22 | 466 | |
P120 | Regeneration of adsorbent using a spouted bed in adsorption heat pump for steam generation | Spouted bed Zeolite Drying | SE-22 | 343 | |
P121 | Investigation of H2O - 1,4-dioxane refrigerant for realization of below zero degree's temperature | absorption refrigerator refrigerant freezing point | SE-22 | 569 | |
(16:00–17:20) (Chair: Saito Y., Sato M.) | |||||
P122 | Numerical investigation of the effect of the liquid film volume on thermocapillary flow in a thin circular liquid film ~ various Prandtl number fluids ~ | Marangoni convection Low Prandtl liquid film Volume ratio | SE-22 | 464 | |
P123 | Numerical Simulation of heat transfer in constant temperature packaging | simulation | SE-22 | 357 | |
P124 | Implementation and validation of S-CLSVOF method including thermal Marangoni convection | Marangoni convection VOF S-CLSVOF | SE-22 | 197 | |
P125 | Effect of solvent evaporation conditions on crack formation in nanoparticle / polymer composite thin films | composite thin films crack solvent evaporation | SE-22 | 520 |