SCEJ

SCEJ 80th Annual Meeting (Tokyo, 2015)

Session programs

Japanese page

Poster session B -Fluid & particle processing, Chemical reaction engineering, Systems, information, and simulation technologies-

XB201-XB257, YB201-YB232

Most recent update: 2015-03-05 09:42:37
TimePaper
ID
Title / AuthorsKeywordsTopic codeAck.
number
Hall X, Y, Day 2
9:2011:20XB201Fine particle production and coating using supercritical fluid
(Hiroshima Inst. Tech.) *Ikeda M., (U. Tokyo) Tsutsumi A.
fine particle
coating
supercritical carbon dioxide
2-f890
9:2011:20XB202Numerical simulation of dispersion and aggregation behaviors of surface modified nanoparticles in shear flow
(Tohoku U.) *Usune S., Kubo M., (Toyama Pref. U.) Sugioka K., (Tohoku U.) Tsukada T., (U. Tokyo) Koike O., (Josai U.) Fujita M., (Tohoku U.) Adschiri T.
surface modified nanoparticles
numerical simulation
shear flow
2-a354
9:2011:20XB203Study on void generation process in wet coagulation of acrylic copolymer resin
(Kobe U.) *Yamamoto Kohei, Hidema Ruri, Suzuki Hiroshi, Komoda Yoshiyuki
acrylic copolymer resin
wet coagulation

2-a642
9:2011:20XB204Experimental study for deformation of viscoelastic fluid surrounding bubble under pressure-oscillating field
(Nagoya I. Tech.) *Mizukoshi A., Matsumoto A., Iwata S., Nagumo R., Mori H., (Nagaoka U. Tech.) Takahashi T.
pressure-oscillating
deformation
viscoelastic fluid
2-a454
9:2011:20XB205Numerical study on macroscopic behavior of solid particles during die filling
(U. Tokyo) *Hoshino Junpei, Sakai Mikio
DEM
die-filling

2-a536
9:2011:20XB206Mixing Mechanism of Dished Bottom Vessel with Large Paddle Impeller Based on Streak Line Theory
(N.I.T) *Hiramatsu M., Kato Y., Furukawa H., Tada Y.
Mixing
Streak Line
Dished Bottom Vessel
2-b10
9:2011:20XB207Effects of particle properties on defluidization caused by switching of fluidizing gas
(Kagoshima U.) *Wada S., Kai T., Nakazato T., Mizuta K.
fluidized bed
defluidization
gas switching
2-c552
9:2011:20XB208Numerical simulation of a rising droplet in another immiscible fluid
(Saitama U.) *Sato Taichi, Baba Ryouma, Syaza Hanani, Homma Shunji, Koga Jiro
droplet
numerical simulation
Front-Tracking
2-e866
9:2011:20XB209Effect of impeller setting conditions of double stage paddle on structure of streak lobe in laminar mixing vessel
(Yokohama Nat. U.) *Hayashi M., Misumi R., Nishi K., Kaminoyama M.
streak lobe
laminar mixing
double stage paddle
2-b209
9:2011:20XB210Basic characteristics of disc turbine type fractal shaped impellers
(Fukuoka U.) *Tomoda K., Miyazaki T., Suzukawa K.
Fractal
Power Consumption
Mixing time
2-b422
9:2011:20XB211Mixing Performance and Power Consumption of Large Asymmetric Impeller
(N.I.T.) *Itoh Tomohiro, (N.I.T) Kato Yoshihito, Furukawa Haruki, Tada Yutaka
Mixing
Asymmetry
Streak Line
2-b21
9:2011:20XB212Evaluation of mixing process of a rotationally reciprocating impeller with discoloring and decoloring reactions
(Kobe U.) *Yamagami Noriyuki, Komoda Yoshiyuki, (Osaka U.) Hirata Yushi, (Kobe U.) Suzuki Hiroshi, Hidema Ruri
mixing process
image analysis
discoloring reaction
2-b848
9:2011:20XB213Development of HB Impeller with Simple Geometry
(NIT) *Ohtani Shota, Kato Yoshihito, Furukawa Haruki, Tada Yutaka
laminar mixing
streak line
large paddle impeller
2-b13
9:2011:20XB214An influence of bubble-interface contamination on a bubble motion, bubble wake and instantaneous mass transfer
(Shizuoka U.) *Huang J., Saito T.
Instantaneous mass transfer
Bubble wake
Contamination
2-e256
9:2011:20XB215Effect of gas properties on bubble size in fluidized catalyst beds
(Kagoshima U.) *Eto K., Kai T., Nakazato T.
fluidized bed
gas properties
bubble size
2-c551
9:2011:20XB216A Study of Combustion Enhancement by Mineral under Low-Temperature in Continuously Regenerating Type PM Removal Device
(Kyushu U.) *Kusu Akitaka, Yamamoto Tsuyoshi, (Adv. Tech. Inst.) Tatebayashi June
PM
Fluidized Bed
Mineral
2-c523
9:2011:20XB217Effects of operational conditions on drying characteristics of slurry in fluidized bed of inert particles under reduced pressure
(Shizuoka U.) *Komuro A., Koyanagi K., Tatemoto Y.
fluidized bed
slurry
reduced pressure
2-c265
9:2011:20XB218Effect of Reinforcing Plate on Power Consumption
(N.I.T) *Fujii K., Kato Y., Furukawa H., Tada Y.
Mixing
Power Consumption
Reinforcing Plate
2-b11
9:2011:20XB219Degumming of crude vegetable oil by utilization of steam and microbubbles
(Keio U.) *Okumura Y., Terasaka K., Fujioka S.
degumming
microbubble
floc
2-d41
9:2011:20XB220Effect of a flow structure on a wastewater treatment system in an ozone contained bubbly flow
(Shizuoka U.) *Shinohara D., Wang C., Sato K., Saito T.
Wastewater treatment system
Flow structure
Ozonation
2-d257
9:2011:20XB221Direct numerical simulation of gas-solid-liquid flows by using the DEM-VOF-IB method
(U. Tokyo) *Sun Xiaosong, Sakai Mikio
gas-solid-liquid flow
direct numerical simulation
fluid-particle interaction
2-e260
9:2011:20XB222Visualization of luminescence and atomization induced via Ultrasonic Irradiation
(Doshisha U.) *Noguchi S., Mori Y., Tsuchiya K.
Ultrasonic atomization
Sonochemical luminescence
Mist formation
2-e835
9:2011:20XB223Fabrication of monodisperse microbubbles using glass capillary microfluidic devices
(Yokohama Nat. U.) *Matsuo A., Kanai T.
Microbubble
Microfluidics
2-e438
9:2011:20XB224Fabrication of Cyanoacrylate Hollow Particles Using Ultrasonically Generated Microbubbles
(Yamagata U.) *Sutoh T., Yoshihiro Y., Makuta T.
Microbubble
Cyanoacrylate
Hollow particle
2-e735
9:2011:20XB225Investigation of Turbulent Spray Flows in a Rotary Bell-Cup Atomizer using Large Eddy Simulation on an Unstructured Finite Volume Method
(Tohoku U.) *Katayama Tomoyuki, Amemiya Shun, Soma Tatsuya, Saito Yasuhiro, Matsushita Yohsuke, Aoki Hideyuki, (Hirosaki U.) Sakabe Ryota, Inamura Takao, (Hachinohe Inst. Tech.) Daikoku Masatoshi, (Honda) Fukuno Junichi
Rotary bell-cup atomizer
Large Eddy Simulation
Computational fluid dynamics
2-e559
9:2011:20XB226Application and validation of the wall boundary model using SDF in die
(Waseda U.) *Tsunazawa Yuki, (U. Tokyo) Shigeto Yusuke, (Waseda U.) Tokoro Chiharu, (U. Tokyo) Sakai Mikio
Discrete Element Method
Signed Distance Function
die filling process
2-f180
9:2011:20XB227A newly foam measurement technique by single-tip optical fiber probe for the dense ozonid foam
(Shizuoka U.) *Nihei A., Saito T.
single-tip optical fiber probe
foam measurement
3D ray tracing simulation
2-e258
9:2011:20XB228Convection of Fine Particles Caused by two-dimensional Vibration
(Kyoto U.) *Sato Sho, Yasuda Masatoshi, Matsusaka Shuji
fine particle
convection
vibration
2-f428
9:2011:20XB229Development of a simultaneous processing of glass and PVC by water jet mill
(Gunma U.) *Haruyama K., Noda R.
jet mill
PVC
glass
2-f762
9:2011:20XB230Hollow Chloroprene Rubber Particles Fabricated by Solvent Evaporation Method
(Yamagata U.) *Yoneyama F., Makuta T.
Hollow particle
Solvent evaporation method
Chloroprene rubber
2-f483
9:2011:20XB231Fabrication of Ni/SiO2 composite particles in organic solvents and their stability in dense suspensions
(Yokohama Nat. U.) *Morita S., Tatami J., Iijima M.
Composite particle
Organic solvent
Dense suspension
2-f741
9:2011:20XB232Evaluation of surface grinding intended to Mn removal from spent filter sand by application of comminution kinetics
(Waseda U.) *Okada Shintaro, Fujihashi Daiki, Tsunazawa Yuki, Tokoro Chiharu
Surface grinding
Filter sand
Comminution kinetics
2-f244
9:2011:20XB233Analysis of a particle packing process during drying of a colloidal suspension
(TUAT BASE) *Oshimi Yu, Inasawa Susumu, Kamiya Hidehiro
particle packing
drying process
film formation
2-g673
9:2011:20XB234Mixing Performance and Power Consumption of BENDREAF
(N.I.T) *Oguri Y., (Hakko Sangyo) Sakakura K., Matuno M., (N.I.T) Kato Y., Furukawa H., Tada Y.
Mixing
Large Paddle Impeller
Streak Line
2-b26
9:2011:20XB235Flow characteristics of a droplet on a vibrating plate
(Kobe U.) *Taniguchi Hidetoshi, Horie Takafumi, Ohmura Naoto
Microfluid
Droplet reactor
MPS
2-b709
9:2011:20XB236Effect of oxygen-pretreatment and Re addition on methylcyclohexane dehydrogenation over Pt/TiO2 catalyst
(Shizuoka U.) *Yamamoto K., Bandai Y., Kohno Y., Watanabe R., Fukuhara C.
Organic chemical hydride
Methylcyclohexane
Pt-based catalyst
5-a171
9:2011:20XB237Production of Phenolic compounds from Lignin-derived slurry liquid by catalytic cracking using Iron oxide catalyst
(Hokkaido U.) *Konishi Ryota, Kawamata Yuki, Shinohara Satoshi, Yagi Taichi, (Idemitsu Kosan Co.,Ltd) Koyama Yoshihito, (Hokkaido U.) Nakasaka Yuta, Tago Teruoki, Masuda Takao
Lignin
Phenolic compounds
Iron Oxide
5-a287
9:2011:20XB238Direct formation and structure control of few-layer graphene on dielectric substrates by etching-precipitation method
(Waseda U.) *Akiba Sachie, (U. Tokyo) Kosaka Masaki, (Waseda U.) Hasegawa Kei, Noda Suguru
graphene
crystal growth
dry-etching
5-h175
9:2011:20XB239Selective oxidation of alcohols by PEFC reactor
(Nagoya U.) *Funahashi K., Miyata Y., Yamada H., Tagawa T.
fuel cell reactor
selective oxidation
cyclic voltammetry
5-a284
9:2011:20XB240Quantitative Evaluation of Micromixing and Design Concept of a Micromixer
(Kyoto U.) *Asano Shusaku, Maki Taisuke, Mae Kazuhiro
Microreactor
Fluid Segment Size
Mixing
5-f185
9:2011:20XB241Time control and kinetic evaluation of microfluidic droplet-based liquid-liquid extraction
(Chiba U.) *Nakajima N., Yamada M., Seki M.
Liquid-liquid extraction
Microchannel
Droplet
5-f705
9:2011:20XB242Synthesis of P-Xylene using MFI zeolite with gradient composition
(Osaka U.) *Yamada M., Uchida Y., Nishiyama N.
zeolite
MFI
para-xylene
5-a239
9:2011:20XB243Reaction analysis of InGaN-MOVPE using the new nitride precursor
(U. Tokyo) *Suzuki Y., Momose T., (ALL) Teramoto T., Dussarrat C., (U. Tokyo) Sugiyama M., Shimogaki Y.
InGaN
reaction analysis
Qmass
5-h838
9:2011:20XB244Characterization and catalytic activity for oxidative dehydrogenation of isobutane on Cr-FSM-16 catalyst prepared using ion exchange method
(U. Tokushima) *Itagaki A., Kurashina M., Nakagawa K., Katoh M., Sugiyama S., (Mitsubishi Rayon) Katou Y., Ninomiya W.
Isobutane
Oxidative dehydrogenation
FSM-16
5-a39
9:2011:20XB245Appropriate catalysts for methanol synthesis from biomass in Indonesia
(Gunma U.) *Iguchi S., Noda R.
catalyst
methanol synthesis

5-a739
9:2011:20XB246Effects of Irradiation of Ultrasound with Dual Frequency on Behavior of Microcapsules
(Tokyo Tech.) *Hasegawa T., Furuya T., Matsumoto H., (Tokyo U. Sci.) Kobayashi D., Shono A.
ultrasound
microcapsule
dual frequency
5-b565
9:2011:20XB247Preparation of zinc oxide thin film by the CVD method using the zinc acetylacetonate.
(Tokai U.) *Misawa Kyosuke, Nakamura Yusuke, Tazawa Takumi, Morita Masahito, Akiyama Yasunobu
CVD
thin film
zinc oxide
5-h462
9:2011:20XB248Antisolvent crystallization of glycine under ultrasonic irradiation
(Nagoya U.) *Osawa K., Nii S.
ultrasound
crystallization
high frequency
5-b688
9:2011:20XB249Direct deposition of Si particle films on current collectors for lithium secondary batteries
(Waseda U.) *Morikawa Yusuke, Hasegawa Kei, Osawa Toshio, Monma Toshiyuki, Osaka Tetsuya, Noda Suguru
Lithium secondary battery
Evaporation
Silicon
5-h616
9:2011:20XB250Controls of diamond growth rate ratio ([100]/[111]) and morphology by direct current plasma chemical vapor deposition
(Osaka Pref. U.) *Yukawa H., Nezaki M., Nakata K., Okamoto N., Saito T., Kondo K., (AIST) Yamasaki S., Okushi H.
CVD
diamond
plasma
5-h747
9:2011:20XB251CO2 Reforming Performances of Fe/TiO2 and Cu/TiO2 Photocatalysts Coated on Different Substrates
(Mie U.) *Zhao Xuyan, Hayakawa Takuya, Kitazumi Taiga, Nishimura Akira, Hirota Masafumi
Visible-light Driven Photocatalyst
CO2 Reforming
Different Substrates Combination
5-c150
9:2011:20XB252Preparation of the WO3/apatite complex and its adsorption and catalytic characterization
(Waseda U.) *Ii J., (JNIOSH) Hongo T., (Waseda U.) Yamazaki A.
visible-light-response photocatalyst
apatite
5-d254
9:2011:20XB253Preparation of liposome and metal compound catalyst and reaction characterization
(Okayama U.) *Takahashi Yuki, Shimanouchi Toshinori, Deguchi Koji, Kimura Yukitaka
liposome
catalyst
5-a475
9:2011:20XB254Effects of reaction media formed by ionic liquids on lipase hydrolysis
(Kyushu U.) *Kawanami T., Baba Y., Goto M., Kamiya N.
ionic liquids
enzymatic reaction
lipase hydrolysis
5-a526
9:2011:20XB255BDF production process using bio alcohol
(Nagoya U.) *Hori Yasushi, Yamada Hiroshi, Tagawa Tomohiko
Bio diesel fuel
Lipase
Bio alcohol
5-g801
9:2011:20XB256Solid phase conversion from biomass utilizing plasma generation technique by microwave irradiation
(Chiba Inst. Tech.) *Takeshita Asuka, Nishiyama Hiromasa, Wada Yoshinari, Onoe Kaoru
Microwave
Biomass
Solid-phase conversion
5-g889
9:2011:20XB257Synthesis of carbon nanotubes on powders by fluidized bed and their total collection by gas flow
(Waseda U.) *Hachiya Soichiro, Kawabata Kosuke, Chen Zhongming, Hasegawa Kei, Osawa Toshio, Noda Suguru
carbon nanotubes
fluidized bed
chemical vapor deposition
5-h302
Hall X, Y, Day 2
9:2011:20YB201Methylcyclohexane dehydrogenation over spiral-type Pt/TiO2 structured catalyst
(Shizuoka U.) *Tanaka K., Hisamatu Y., Yamamoto K., Kohno Y., Watanabe R., Fukuhara C.
methylcyclohexane
dehydrogenation
spiral-type structured catalyst
5-a169
9:2011:20YB202Studies on the cellulolytic enzyme from the white rot fungus
(Muroran Inst. Tech.) *Sakamoto Naoki, Yasui M.
White rot fungus
Cellulolytic enzyme
Biomass
5-g430
9:2011:20YB203Development of Lipids and Nutrients Recovery Technology from Microalgae in Hydrothermal Liquefaction by using Solid Products
(TUAT) *Kakimura Mai, Fushimi Chihiro
Microalgae
Hydrothermal liquefaction
Activated carbon
5-g491
9:2011:20YB204Doping and de-doping processes of various carbon nanomaterials with Br2 for their resistivity control
(Waseda U.) *Takabatake Mami, Hasegawa Kei, Osawa Toshio, Noda Suguru
graphene
carbon nanotube
doping
5-h305
9:2011:20YB205The effect of supported catalyst preparation for the reactivity with the silicon micro reactor
(Nagoya U.) *Yamazaki T., Yamada H., Tagawa T.
micro reactor
catalyst
silicon
5-a797
9:2011:20YB206Evaluation of the step coverage of the ZnO thin films prepared by using the APCVD method
(Tokai U.) *Hayakawa Hisashi, Yamanashi Toshihiro, Kataoka Takahiro, Kanamori Mizuya, Akiyama Yasunobu
CVD
Zinc oxide
Thin film
5-h465
9:2011:20YB207Rapid vapor deposition of Cu films and application to electrodes for lithium secondary batteries
(Waseda U.) *Aoi Shigeki, Hasegawa Kei, Osawa Toshio, Monma Toshiyuki, Osaka Tetsuya, Noda Suguru
Rapid vapor deposition
Cu
lithium secondary batteries
5-h510
9:2011:20YB208Contact resistance evaluation of electron beam evaporated TiCN/Pt/Au electrode on p-type diamond by transmission line model
(Osaka Pref. U.) *Suzuki S., Nezaki M., Okamoto N., Saito T., Kondo K., (AIST) Matsumoto T., Makino T., Ogura M., Kato H., Takeuchi D., Yamasaki S., Okushi H.
diamond
contact resistance
electron beam evaporated
5-h785
9:2011:20YB209Improvement of the catalytic activity on MCM-41 for oxidative dehydrogenation of isobutane
(U. Tokushima) *Ehiro T., Misu H., Kurashina M., Nakagawa K., Katoh M., Sugiyama S., (Mitsubishi Rayon) Katou Y., Ninomiya W.
Oxidative dehydrogenation
isobutane
MCM-41
5-a40
9:2011:20YB210Gass-phase synthesis of Si nanoparticles and fabrication of three-dimensional thick electrodes for lithium secondary batteries
(Waseda U.) *Kowase Takayuki, Hasegawa Kei, Osawa Toshio, Monma Toshiyuki, Osaka Tetsuya, Noda Suguru
Lithium secondary battery
Evaporation
Silicon
5-h518
9:2011:20YB211The ferroelectric and piezoelectric properties of ferroelectric films by PLD
(Osaka Pref. U.) *Amano T., Takada Y., Okamoto N., Saito T., Kondo K., Yoshimura T., Fujimura N., (ISIR, Osaka U.) Higuchi K., Kitajima A.
ferroelectric properties
pulsed laser deposition
piezoelectric properties
5-h809
9:2011:20YB212CNTs support catalyst for fluidized bed catalytic decomposition of ammonia
(Gunma U.) *Wanibuchi K., Atsumi R., Noda R.
NH3 decomposition
CNTs
fluidized-bed
5-a819
9:2011:20YB213Chemical vapor deposition rate of pyrolytic carbon from aromatic hydrocarbons
(Kyoto U.) *Baba S., Iwai T., Nagata K., Kawase M.
Chemical vapor deposition
Pyrolysis
Carbon
5-h450
9:2011:20YB214Continuous Plasma Generation by Using Gas-Liquid Slug Flow
(Nagoya U.) *Mano Kakeru, Hayashi Yui, Takada Noriharu, Kanda Hideki, Goto Motonobu
plasma
slug flow
hydroxyl radical
5-c859
9:2011:20YB215Multi-scale analysis of SiC-CVD from trimethylchlorosilane
(U. Tokyo) *Sugiura Hidetoshi, Shima Kohei, Sato Noboru, Funato Yuichi, (IHI) Fukushima Yasuyuki, (U. Tokyo) Momose Takeshi, Shimogaki Yukihiro
SiC
CVD
trimethylchlorosilane
5-h564
9:2011:20YB216Synthesis of graphene by hydrothermal electrolysis
(IMRAM, Tohoku U.) *Okamura Yusuke, Tomai Takaaki, Honma Itaru
hydrothermal
graphene
electrolysis
5-i643
9:2011:20YB217A gas-liquid-solid reaction in a reactor system consisting of microchannel and stirred tank
(U. Tokushima) *Kume K., Sotowa K.-I., Horikawa T., Alcantara-Avila J. R.
microchannel
gas-liquid-solid reaction
gas absorption
5-f885
9:2011:20YB218Application Method for Simulation of Phase Transfer Catalysis by Using Rate-Based Model for Mass Transfer
(Tokyo Tech.) *Mizutani A., Hayashi M., Matsumoto H.
phase transfer catalysis
numerical simulation
mass transfer model
6-c561
9:2011:20YB219Design support for the production of biomass-derived polypropylene based on environmental assessment
(U. Tokyo) *Abe M., Uehara E., Sugiyama H., Hirao M.
biomass-derived plastic
life cycle assessment
feasibility study
6-b557
9:2011:20YB220Retrofitting methodology for pharmaceutical drug purification processes using simulation technologies
(U. Tokyo/ETHZ) *Casola Gioele, (U. Tokyo) Sugiyama Hirokazu, (Shionogi) Yoshikawa Satoshi, Nakanishi Hayao, (U. Tokyo) Hirao Masahiko
MINLP
Degradation
Industrial case study
6-e365
9:2011:20YB221PF-GMM:Fault Detection based on probability distributions
(TUAT) *Ide Mizuki, Yamashita Yoshiyuki
Process Monitoring
Particle Filter
Fault Detection
6-a292
9:2011:20YB222Modeling and avoidance of abnormal behaviors of chemical processes by Petri nets
(Nagoya U.) *Imaizumi Y., Yamakawa T., Hashizume S., Hashizume S., Yajima T., Onogi K.
abnormal behavior
fault avoidance control
Petri net
6-a628
9:2011:20YB223Multiobjective Design Method for Use Processes of Pharmaceutical Ingredients Considering Quality and Cost-Effectiveness
(U. Tokyo) *Iida Takayuki, Ota Kosuke, Sasozaki Tomohito, Sugiyama Hirokazu
Excipients
Degradation
Materials management
6-e246
9:2011:20YB224Supporting method for the choice between single-and multi-use technologies in manufacturing sterile drug products
(U. Tokyo) *Shirahata Haruku, Sugiyama Hirokazu, Hirao Masahiko
Pharmaceutical manufacturing
Life cycle assessment
Decision-making
6-e251
9:2011:20YB225Controller design for a plant having jump in manipulated variable
(NITech) *Sato R., Yoneya A.
controller design
discontinuity
limit cycle
6-d234
9:2011:20YB226Control of discrete manufacturing system with uncertainty using Bayesian inference
(Nagoya U.) *Tanabashi Y., Yajima T., Hashizume S., Onogi K.
Bayesian inference
control of discrete manufacturing system
uncertainty
6-d414
9:2011:20YB227Construction of mathematical model for pharmaceutical batch processes
(U. Tokyo) *Yabuta Keisho, Sugiyama Hirokazu, Hirao Masahiko
Process modeling
Fault Tree Analysis
Process improvement
6-e252
9:2011:20YB228Method for reducing environmental, health and safety (EHS) risks in pharmaceutical drug substance manufacturing based on multiobjective evaluation
(U. Tokyo) *Segawa Akiko, Sugiyama Hirokazu, (Shionogi) Yoshikawa Satoshi, Toyama Takayuki, Nakanishi Hayao, (U. Tokyo) Hirao Masahiko
Process hazard
Batch process
Industrial case study
6-e364
9:2011:20YB229Procedure for Optimal Structure Determination of Ternary Distillation Processes
(Kyoto U.) *Takase Hiroshi, Hasebe Shinji
Process synthesis
Ternary distillation
Linear Programming
6-e457
9:2011:20YB230Construction of process model for carbon resources utilization considering non-conventional resources
(U. Tokyo) *Tamura H., Uehara E., Sugiyama H., Hirao M.
scenario analysis
shale gas
biomass
6-b485
9:2011:20YB231Design and optimization of the cascaded binary cycle power generation system
(Yamagata U.) *Dohmori Yuki, Yamaki Takehiro, Matsuda Keigo
power generation system
combined cycle
optimization
6-b620
9:2011:20YB232Establishment of social acceptability evaluation method of general waste incineration facility
(Gifu U.) *Hoshino T., Moritomi H., Kumabe K., (Ebara C.) Miyoshi T., Noguchi M.
Waste processing
Vensim
System dynamics
6-b882

Technical program
SCEJ 80th Annual Meeting (Tokyo, 2015)

© 2015 The Society of Chemical Engineers, Japan. All rights reserved.
Most recent update: 2015-03-05 09:42:37
For more information contact Organizing Committee, SCEJ 80th Annual Meeting (Tokyo, 2015)
E-mail: inquiry-80awww3.scej.org
This page was generated by easp 2.36; proghtml 2.37 (C)1999-2015 kawase