Technical Program — Session 10

Session Program

The technical program was fixed on Monday, September 9. Further changes are listed on the Program top page, if any.

The first letter of the presentation ID represents the hall. The second letter represents the day of the presentation (1: Mon., 2: Tue., 3: Wed., 4: Thu., 5: Fri.). The number in < > at the end of each presentation is the abstract ID.

Session 10. Process safety management and technology

Day 2, Tuesday, September 24

17:00–19:00 Hall P

Poster session

PO241 “Fault Detection and Diagnosis of Nonlinear Batch Processes Using Multiway Principal Polynomial Component Analysis,”
Xinmin ZHANG¹, Manabu KANO¹, Yuan LI²,
¹ Kyoto University, Kyoto
² Shenyang University of Chemical Technology, Shenyang, China <101226-2>

PO242 “Case study of text analytics applied to accident reports of a university,”
Rumiko HAYASHI, Kouhei SHINKAWA, Tsubasa YAMADA, Kengo TOMITA, Tadashi NISHIKIMI, Shizuaki MURATA, Hidekazu KURIMOTO,
Nagoya University, Nagoya <101214-1>

PO243 “Static and dynamic flame model effects on thermal buckling: fixed-roof tanks adjacent to an ethanol pool-fire,”
Yunhao LI^1,2, Juncheng JIANG^1,2,3, Qingwu ZHANG^1,2, Yuan YU^1,2, Zhirong WANG^1,2, Haisen LIU^1,2, Chi-Min SHU⁴,
¹ Col. Safety Sci. Eng., Nanjing Tech University, Nanjing
² Jiangsu Key Lab. Hazardous Chem. Safety Control, Col. Safety Sci. Eng., Nanjing Tech University, Nanjing
³ Sch. Env. Safety Eng., Changzhou University, Changzhou
⁴ D. Env. Safety Healthy, National Yinlin University of Science and Technology, Douliou <100384-1>

PO244 “Mixing Effects on Thermokinetic Parameter Determination for Esterification of Propionic Anhydride with 2-Butanol by Reaction Calorimetry,”
Qiang CHEN¹, Juncheng JIANG*^1,2, Yong Pan¹, Lei Ni¹, WEI Jiang¹,
¹ Col. Safety Sci. Eng., Nanjing Tech University, Nanjing, 210009, Jiangsu Province, China
² Sch. Env. Safety Eng., Changzhou University, Changzhou, China <100385-1>

PO245 “Consideration of incident scenarios related to unintended reactions by developing bow tie diagrams,”
Yoshihiko SATO¹, Yukiyasu SHIMADA¹, Haruhiko ITAGAKI¹, Tetsuo FUCHINO²,
¹ National Institute of Occupational Safety and Health, Tokyo
² Tokyo Institute of Technology, Tokyo <100114-1>

PO246 “Methodology for fugitive emissions control and occupational health risk assessment in chemical processes based on the source, path and receptor model,”
Yousef A. ALHAMDANI¹, Mimi H. HASSIM¹, Shaik M. SALIM²,
¹ Centre of Hydrogen Energy, D. Chem. Eng., Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Malaysia
² Institute of Chemical and Engineering Sciences, 1, Pesek Road, Jurong Island, Singapore 627883, Singapore <101455-1>

PO247 “Novel methodology for health hazard and risk assessment of dermal and inhalation exposure,”
Rafeqah Raslan^1,2, Mimi H. HASSIM^1*, Nishanth G. CHEMMANGATTUVALAPPIL³, Denny K. S. NG⁴,
¹ School of Chemical and Energy Engineering / Centre of Hydrogen Energy, Universiti Teknologi Malaysia, Johor, Malaysia
² D. Chem. Eng., Universiti Teknologi MARA, Selangor, Malaysia
³ D. Chem. Env. Eng. / Centre of Excellence for Green Technologies, The University of Nottingham Malaysia Campus, Selangor, Malaysia
⁴ Sch. Eng. Phys. Sci., Heriot-Watt University Malaysia, Putrajaya, Malaysia <101491-1>

Day 3, Wednesday, September 25

10:30–12:00 Hall O

Oral session

Chair: Tetsuo FUCHINO, Tokyo Institute of Technology

O301 “Utilizing Process Safety Information (PSI) to prevent accidents,”
Tadao MINAMIGAWA,
Environment Division, AGC Co., Ltd. Chiba Factory <101284-1>

O302 “Introduction of our journey toward the development of process safety management system,”
Atsushi NAGAOKA,
Idemitsu Kosan <101145-1>

O303 &(canceled)

Chair: Tadao MINAMIGAWA, AGC

O304 “Development automatically checklist generator for supporting management of change based on business process model,”
Kazuhiro TAKEDA¹, Tetsuo FUCHINO², Hideo SAITO³, Teiji KITAJIMA⁴, Yukiyasu SHIMADA⁵, Kensuke IUCHI⁶,
¹ Shizuoka University, Shizuoka
² Tokyo Institute of Technology, Tokyo
³ Saito MOT Labo., Tokyo
⁴ Tokyo University of Agricalture and Technology, Tokyo
⁵ National Institute of Occupational Safety and Health, Tokyo
⁶ Safety Case Labo., Tokyo <101155-1>

O305 “Analysis of Safety Culture Weaknesses in Chemical Safety Board Invetigation Reports,”
Kenichi UNO,
Japan Safety Competency Center <100705-1>

O306 “PETRONAS- Major Accident Hazard (MAH) and Safety Critical Element (SCE) Management Process,”
Sy M Nasir B SY A RAHMAN¹, Abu Yazid B ZAINUDDIN¹, Razmahwata B B MOHAMAD RAZALLI²,
¹ PETRONAS, Kuala Lumpur
² IGL Services Sdn Bhd, Kuala Lumpur <101389-1>