Technical Program — Session 2
Session Program
The technical program was fixed on Monday, September 9. Further changes are listed on the Program top page, if any.
The first letter of the presentation ID represents the hall. The second letter represents the day of the presentation (1: Mon., 2: Tue., 3: Wed., 4: Thu., 5: Fri.). The number in < > at the end of each presentation is the abstract ID.
The fluid-particle processing is related to quite a few processes for chemical products such as organic or non-organic materials, metal, ceramic, drug, food, etc. Therefore, fundamental and/or transdisciplinary knowledge of the fluid-particle processing is required in the chemical process design. In this session, researches on the following topics in the field of fluid-particle processing will be discussed; Heat and mass transfer, Fluid engineering, Mixing, Bubbles, drops, and particles dispersion engineering, Fluidization and Powder process engineering.
Day 2, Tuesday, September 24
10:45–12:00 Hall B
Oral session
Chairs: Toru ISHIGAMI, Hiroshima University; Mikio SAKAI, the University of Tokyo
B202 “Discuss efforts against sustainable productivity by using computational fluid dynamics —A case of Japanese chemical company—,”
Kazutaka TAKI1, Kei SAKAKURA2, Yasushi ISHIBA3, Atsushi KAWADA4, Takeshi SUEMASU5, Shunichi KAWANAKA6, Naoki SHIMADA7,
1 TOSOH Corp.
2 Idemitsu Kosan Co. Ltd.
3 Mitsubishi Chemical Corp.
4 Mitsui Chemicals Incorp.
5 Ube Industries Ltd.
6 Kuraray Co. Ltd.
7 Sumitomo Chemical Co. Ltd. <100266-1>
B203 “Machine learning-based framework of descriptor selection for porous material design,”
Tomoki YASUDA1, Shinichi OOKAWARA1,2, Shiro YOSHIKAWA1, Hideyuki MATSUMOTO1,
1 D. Chem. Sci. Eng., Sch. Mater. and Chem. Tech., Tokyo Institute of Technology, Tokyo
2 D. Ene. Resour., Egypt-Japan University of Science and Technology, Alexandria <100548-1>
B204 “Determination of mass transfer coefficient with sparged bubble analysis in stir tank bioreactors,”
Yusuke TOMIOKA1, Takao ITO1, Chinatsu MINAGAWA2, Koichi KAMEKURA2,
1 Merck Ltd., Tokyo
2 IHI Plant Engineering Corporation, Tokyo <100775-1>
B205 “[Keynote] Hard-sphere / Pseudo-particle Modeling of Reaction-Diffusion Coupling,”
Wei GE1,2, Chengxiang LI1,
1 State Key Laboratory of Multiphase Complex Systems, I. Proc. Eng., Chinese Academy of Sciences
2 Sch. Chem. Eng., University of Chinese Academy of Sciences <402004-1>
13:30–15:00 Hall B
Oral session
Chairs: Hsiu-Po KUO, Chang Gung University; Jun OSHITANI, Okayama University of Science
B213 “[Keynote] Energy recovery from sewage sludge by combined hydrothermal pretreatment and CO2 gasification,”
Ye SHEN1, Chi-Hwa WANG2*,
1 NUS Env. Res. I., National University of Singapore, Singapore
2 D. Chem. Biomolec. Eng., National University of Singapore, Singapore <402002-1>
B215 “Mixing Behaviors in Mini-Fluidized Beds,”
Eldin Wee Chuan LIM,
National University of Singapore <100904-1>
B216 “Experimental and Numerical Studies of Particle Mixing in a Rotating Drum with an Inner Particle Motion Blocking Plate,”
Xuan WANG1, An-Ni HUANG1,2, Wan-Yi HSU1, Hsiu-Po KUO1,2,
1 D. Chem. Mater. Eng., Chang Gung University, Taoyuan
2 D. Otolaryngology-Head & Neck Surgery, Linkou Chang Gung Memorial Hospital, Taoyuan <100254-1>
B217 “Application of eulerian granular model to evaluate solid-liquid agitation,”
Yasuhiro SHOJI, Kentaro OTAWARA,
Kureha Corporation, Iwaki <100186-1>
B218 “Aggregation Process of Silica Micro Particles in a Two Dimensional Chaotic Mixing Field,”
Yusuke OCHI1, Takafumi HORIE1, Yoshiyuki KOMODA1, Kuo-Lun TUNG2, Naoto OHMURA1,
1 Kobe University, Kobe
2 National Taiwan University, Taipei <100013-1>
15:30–17:00 Hall B
Oral session
Chairs: Kazuhiko NISHI, Chiba Institute of Technology; Yoshiyuki KOMODA, Kobe University
B221 “Mixing performance of inner baffle in shear thinning fluid,”
Haruki FURUKAWA, Yoshito MIZUNO, Yoshihito KATO,
Nagoya Institute of Technology, Nagoya <100336-1>
B222 “Gelation behavior of shear-thinning hydrogels fabricated via a Kenics static mixer,”
Athira Sreedevi MADHAVIKUTTY1, Seiichi OHTA2, Taichi ITO1,2,
1 D. Chem. Sys. Eng., the University of Tokyo
2 Center for Disease Biology and Integrative Medicine, The University of Tokyo <100861-1>
B223 “Direct numerical simulation of shear-thickening in dilute suspensions in a viscoelastic fluid,”
Yuki MATSUOKA1,2, Yasuya NAKAYAMA1, Toshihisa KAJIWARA1,
1 Kyushu University, Fukuoka
2 Sumitomo Bakelite Co., Ltd., Shizuoka <100126-1>
B224 “Quantification of the flow pattern ahead of and behind stirring blades from laminar, transitional to turbulent regime.,”
Tokio HAKAMADA, Ryuta MISUMI, Meguru KAMINOYAMA,
Yokohama National University, Yokohama <100670-1>
B225 “CFD analysis of solid particle concentration distribution in solid-liquid stirred tank with various particle property and stirring condition,”
Shunnosuke IMAI, Ryuta MISUMI, Meguru KAMINOYAMA,
Yokohama National University, Yokohama <100669-1>
B226 “Turbulence Modeling in Side-Entry Stirred Tank Mixing Time Determination,”
Suci MADHANIA, Ni'am Nisbatul Fathonah, Tantular NURTONO, Sugeng WINARDI,
Chem. Eng. D., Institut Teknologi Sepuluh Nopember, Surabaya <100709-1>
Day 3, Wednesday, September 25
10:30–12:00 Hall B
Oral session
Chairs: Tsutomu NAKAZATO, Kagoshima Univeristy; Mikio YOSHIDA, Doshisha University
B301 “Evaluation of agglomeration and disruption for fine powder in vibrating fluidized bed,”
Tomonori FUKASAWA, Akihiro YAMANE, Toru ISHIGAMI, Kunihiro FUKUI,
Hiroshima University, Higashi-Hiroshima <100925-1>
B302 “Defluidization Investigation on Bubbling Fluidized Bed Particle against Alkaline Addition during Pyrolysis Process,”
PRIMA ZULDIAN, Reiji NODA,
Gunma University, Kiryu, Gunma <101109-1>
B303 “Dry separation of particulate mixture based on density-segregation in a vibro-fluidized bed,”
Jun OSHITANI1, Ryo SUGO1, Yoshihide MAWATARI2,
1 Okayama University of Science, Okayama
2 Kyushu Institute of Technology, Kitakyushu <100124-1>
B304 “Metallic and Bimetallic Incorporated Hydroxyapatite Catalysts Prepared via Drip Thermal Treatment Using a Fluidized Bed for Oxidative Dehydrogenation of Propane,”
Tsutomu NAKAZATO, Yukinori KUMEDA, Takami KAI,
Kagoshima University, Kagoshima <101349-1>
B305 “[Keynote] Fluidization-based Reaction-decoupling Fuel Conversion Fundamentals and Technologies,”
Guangwen XU1,2, Zhennan HAN1,2, Xi ZENG2, Junrong YUE2,
1 Shenyang University of Chemical Technology, Shenyang
2 State Key Lab. Multi-Phase Complex Systems, I. Proc. Eng., Chinese Academy of Sciences, Beijing <402001-1>
13:30–14:30 Hall B
Oral session
Chairs: Norikazu NAMIKI, Kogakuin University; Shuji OHSAKI, Osaka Prefecture University
B313 “Reduction of particle stiffness in DEM simulation considering attraction force,”
Ryosuke YAMAGAMI, Kimiaki WASHINO, Ei L. CHAN, Takuya TSUJI, Toshitsugu TANAKA,
Osaka University, Suita <101294-1>
B314 “Numerical simulation of particle motions in cascade impactor and human respiratory system,”
Shuji OHSAKI, Ryosuke MITANI, Saki FUJIWARA, Hideya NAKAMURA, Satoru WATANO,
Osaka Prefecture University, Osaka <100300-1>
B315 “In-line particle size monitoring and control of the jet mil by laser diffraction analyzer,”
Hideyuki IKEDA1, Fumiaki SATO1, Takayuki HIRA2, Ryohei IKEDA2,
1 Malvern Panalytical Division of Spectris Co., Ltd.
2 Seishin Enterprise Co., Ltd. <101071-1>
B316 “Suppression of re-entrainment of particles captured on medium-performance filter media by loading with atomized APA solution,”
Norikazu NAMIKI1, Kazuma YOSHIMURA1, Ryoichi NAKAYAMA1, Takeshi IKEDA2, Hideo KUNITOMO2, Shunsuke KOBAYASHI2,
1 Kogakuin University, Hachioji
2 ESPO Chemical Co., Ltd., Chiba <100360-1>
15:30–17:00 Hall B
Oral session
Chairs: Hideyuki IKEDA, Malvern Panalytical Division of Spectris Co., Ltd.; Kuniaki GOTOH, Okayama University
B321 “CFD-DEM analysis of PM filtration due to adhesion force using fluidized bed,”
Kento YOKOO1, Tsuyoshi YAMAMOTO1, Hideki MATSUNE1, Masahiro KISHIDA1, June TATEBAYASHI2,
1 Kyushu University, Fukuoka
2 Advanced Technology Institute Inc., Kobe <100522-1>
B322 “MLA and DEM study of enhancement of copper liberation using high pressure grinding roll,”
Yu NAGATA1, Yuki TSUNAZAWA1,2, Kouji TSUKADA3, Yuichi YAGUCHI4, Yosuke EBISU5, Kohei MITSUHASHI5, Chiharu TOKORO1,
1 Waseda University, Tokyo
2 National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba
3 Furukawa Industrial Machinery Systems Co., Ltd., Tochigi
4 Furukawa Co., Ltd., Tsukuba
5 Nittetsu Mining Co., Ltd., Nishitama <100691-1>
B323 “[Keynote] Understanding and controlling particle mixing and de-mixing,”
Hsiu-Po KUO1,2, An-Ni HUANG1,2,
1 D. Chem. Mater. Eng., Chang Gung University, Taoyuan
2 D. Otolaryngology—Head & Neck Surgery, Linkou Chang Gung Memorial Hospital, Taoyuan <402005-1>
B325 “Numerical investigation of combustion process in an industrial pulverized-coal boiler,”
An-Ni HUANG1,2, Wan-Yi HSU1, Hsiu-Po KUO1,2,
1 D. Chem. Mater. Eng., Chang Gung University, Taoyuan
2 D. Otolaryngology-Head & Neck Surgery, Linkou Chang Gung Memorial Hospital, Taoyuan <100692-1>
B326 “Poly (sodium 4-styrenesulfonate) decorated hydrophilic carbon black particles from waste pyrolysis process,”
I-Feng WU1, Guan-Ting PAN2, Jeff CHEN3, Ying-Chih LIAO1,
1 D. Chem. Eng., National Taiwan University, Taipei
2 D. Chem. Eng., National Taipei University of Technology, Taipei
3 SeaWay Technology Co., Ltd. <101225-1>
Day 3, Wednesday, September 25
17:00–19:00 Hall P
PB301 “Numerical simulation of particle suspension in a stirred tank equipped rigid-flexible impeller,”
Xia XIONG, Zuohua LIU, Liang WANG, Changyun TAO,
Sch. Chem. and Chem. Eng., Chongqing University, Chongqing <100023-1>
PB302 “Numerical simulations of flow and heat transfer in a industrial hydro thermal cracking reactor of residue oil,”
Zhenxing ZHU, Xiaojin TANG, Zijun WANG,
SINOPEC Research Institute of Petroleum Processing, Beijing <100046-1>
PB303 “Study on the Effects of Grinding Factor and Scaling up in Grinding Using Horizontal Dry Bead Mill,”
Takahiro TAMURA1, Mitsumasa KIMATA2,
1 Institute of Fine Particle Technology, Ashizawa Finetech Ltd, Oyama
2 Yamagata University, Yonezawa <100077-1>
PB304 “The facile control synthesis of hexagonal NaREF4 in a continuous microfluidic reaction system,”
Di LIU, Kai WANG, Yundong WANG,
State Key Lab. Chem. Eng., D. Chem. Eng., Tsinghua University, Beijing <100078-1>
PB305 “Growth of a pinhole generated in a thin coated liquid film,”
Takumi CHIBA1, Ryota NAKAJIMA1, Atsuya TAKADA1, Shunji HOMMA1, Donghyuk KANG1, Hiroyuki HIRAHARA1, Yosuke OKUBO2, Hirokazu UMEMIYA2, Sumihisa ODA2,
1 Saitama University, Saitama
2 Saiden Chemical Industry Co., Ltd, Saitama <100123-1>
PB306 “Three-dimensional simulations of laminar film condensation,”
Masaki YOSHINUMA, Kei URUSHIBARA, Shunji HOMMA,
Saitama University, Saitama <100208-1>
PB307 “Evaluation of drying process of a droplet considering flow and temperature fields in a spray dryer,”
Ryuya ITANO, Tomohisa KAWAGUCHI, Koichi NAKASO, Yasushi MINO, Kuniaki GOTOH,
Okayama University, Okayama <100318-1>
PB308 “Evaluation of gas dispersion in stirred tank with fractal shaped impellers,”
Yugo KANAI, Naoki KITAYAMA, Kazumi SUZUKAWA,
Fukuoka University, Fukuoka <100371-1>
PB309 “Experimental investigation of gas slug shrinking behaviour inside a microchannel,”
Yusuke NOGUCHI1, Satoko FUJIOKA2, Koichi TERASAKA2, Simon MATTHES3, Michael SCHLÜTER3,
1 Sch. Sci. Open and Env. Systems, G. S. Sci. Tech., Keio University, Yokohama
2 D. Appl. Chem., F. Sci. Tech., Keio University, Yokohama
3 Institute of Multiphase Flows, Technische Universität Hamburg Harburg, Hamburg <100470-1>
PB310 “Evaluation of Particle-Wall Adhesion Characteristics Based on Separation of Adhered Particle by High Speed Air Jet,”
Yuna ISHIDA, Maho KAGEYAMA, Yasushi MINO, Koichi NAKASO, Kuniaki GOTOH,
Okayama University, Okayama <100495-1>
PB311 “Droplet breakage in a pulsed disc and doughnut column,”
Shaowei LI, Shan JING, Hao ZHOU, Xiong YU,
I. Nuclear and New Energy Tech., Tsinghua University, Beijing <100532-1>
PB312 “Whipping behavior of rice flour dough,”
Chiaki ICHIKAWA, Takahiro FUKUNAGA, Daitaro ISHIKAWA, Tomoyuki FUJII,
G. S. Agric. Sci., Tohoku University, Sendai <100591-1>
PB313 “Rheological properties of Nitrile Rubber Latex blended with Titanium Dioxide (TiO2),”
Tiam-Ting TEE1, Siew-Wai PHANG2, Tin-Sing LEE1, Soo-Tueen BEE1, Heng-Wai KANF1,
1 Universiti Tunku Abdul Rahman, Kuala Lumpur
2 Tayloys University, Kuala Lumpur <100603-2>
PB314 “Application of DEM simulation to design of a laboratory-scale high pressure grinding roll,”
Yu NAGATA1, Yuki TSUNAZAWA1,2, Kouji TSUKADA3, Yuichi YAGUCHI4, Yosuke EBISU5, Kohei MITSUHASHI5, Chiharu TOKORO1,
1 Waseda University, Tokyo
2 National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba
3 Furukawa Industrial Machinery Systems Co., Ltd., Tochigi
4 Furukawa Co., Ltd., Tsukuba
5 Nittetsu Mining Co., Ltd., Nishitama <100691-2>
PB315 “Effects of molecular weight on drag force of polyethyleneglycol in flows measured by a scanning probe microscope,”
Kenya FUJITO, Ruri HIDEMA, Hiroshi SUZUKI,
Kobe University, Kobe <100769-1>
PB316 “Mass transfer in alternating flow of two immiscible liquids in microchannel,”
Mayu NISHIYAMA, Takatomo TSUDA, Hiroyuki HIRANO, Tomohiko KIHARA, Hideaki OBATA, Kenya KUWAGI,
Okayama University of Science, Okayama <100826-1>
PB317 “Influence of The Injection Point on The Mixing Process with A Large-type Impeller in Laminar Mixing,”
Keisuke SAKATA, Kazuhiro OJIMA, Kazuhiko NISHI,
Chiba Institute of Technology <100897-1>
PB318 “Particle dispersion and aggregation under various shear fields,”
Katsuki MURANISHI1, Hayato MASUDA2, Takashi HASEGAWA3, Takafumi HORIE1, Naoto OHMURA1,
1 D. Chem. Sci. Eng., Kobe University, Kobe
2 Sch. Food and Nutritional Sci., University of Shizuoka, Suruga
3 Toagosei Co., Ltd., General center of research and development, 8 Showamachi, Minato, Nagoya <101152-1>
PB319 “Delivery of hydrophilic materials into tobacco BY-2 cells using PLGA nanoparticles,”
Hikari AISU, Yasuhiro KONISHI, Toshiyuki NOMURA,
D. Chem. Eng., Osaka Prefecture University, Sakai <101318-1>
PB320 “Flow polarization imaging around a rising bubble in aqueous gelatin solution under gelation process,”
Hiroya TOKUUMI1, Hiroki NAKANO1, Shuichi IWATA1, Ryo NAGUMO1, Hideki MORI1, Tsutomu TAKAHASHI2,
1 Nagoya Institute of Technology, Nagoya
2 Nagaoka University of Technology, Nagaoka <101335-1>
PB321 “Experimental study of the dynamics of two-fluid displacement and flow through eccentric annuli,”
Dzuy NGUYEN,
University of Adelaide, Adelaide <101367-1>
PB322 “Continuous production of monodisperse water-in-oil droplets under pulsatile-free flow,”
Jia Yun XU, Jen Han CHIU, Jen-Huang HUANG,
National Tsing Hua University, Hsinchu <101386-1>
PB323 “Photocatalytic degradation of volatile organic compounds (VOCs) using ultrasonically-formed droplets containing TiO2 particles,”
Miyu KIMURA1, Ryoichi NAKAYAMA1, Norikazu NAMIKI1, Kazuhiko SEKIGUCHI2, Naoki KAGI3,
1 Kogakuin University,
2 Saitama University,
3 Tokyo Institute of Technology <101432-1>
PB324 “Numerical Simulations using the MOF method of Individual Bubbles Growing and Detaching due to the Nucleate Boiling Process.,”
Yuya SHUDO1, Mitsuhiro OHTA1, Mark SUSSMAN2,
1 Tokushima University, Tokushima
2 Florida State University, Tallahassee <101442-1>
PB325 “An Experimental Study of the Morphology of a Drop Rising through a Hydrophobically Modified Alkali-Soluble Emulsion Polymer Solution,”
Takuya MAKITA1, Mitsuhiro OHTA1, Shuichi IWATA2,
1 Tokushima University, Tokushima
2 Nagoya Institute of Technology, Nagoya <101446-1>
PB326 “Numerical simulation of droplet breakup in droplet swarm by level set method with multi-levels,”
Yu XIONG, Jing SHAN, Li SHAOWEI,
Tsinghua University, Beijing <101456-1>
PB327 “Determination of dynamic interfacial tension in a pulsed disc and doughnut column,”
Bo WANG, Shan JING, Shaowei LI*,
I. Nuclear and New Energy Tech., Tsinghua University <101467-1>
PB328 “Volume penalization method for gas-liquid-solid flows with immersed free surface,”
Giang NGUYEN1, Kimiaki WASHINO1, Takuya TSUJI1, Toshitsugu TANAKA1,
1 Osaka University, Suita <101494-1>
PB329 “Molecular simulation of Amphotericin B-Ergosterol channel for the novel water channel,”
Hao Chen WU1, Tomohisa YOSHIOKA1, Keizo NAKAGAWA1, Takuji SHINTANI1, Toshinori TSURU2, Hideto MATSUYAMA1,
1 Kobe University, Kobe
2 Hiroshima University, Hiroshima <100806-1>
PB330 “Effects of Filling on the Segregation Patterns in a High Fill Level Rotating Drum,”
Chi-Yun LIN1, An-Ni HUANG1,2, Hsiu-Po KUO1,2,
1 D. Chem. Mater. Eng., Chang Gung University, Taoyuan
2 D. Otolaryngology-Head & Neck Surgery, Linkou Chang Gung Memorial Hospital, Taoyuan <100692-2>
PB331 “Validation of CPFD models in for simulating hydrodynamics, heat transfer and reactions in CFB downer reactor for coal pyrolysis with binary particles,”
Yingya WU, Xiaogang SHI, Xingying LAN*, Jinsen GAO,
State Key Lab. Heavy Oil Proc., China University of Petroleum, Beijing <101179-1>
PB332 “CFD simulations and optimization for transfer lines,”
Ya QIN,
Res. I. Petroleum Proc., SINOPEC, Beijing <100024-1>
PB333 “Influence of Hansen Solubility Parameter on Resin Flowability,”
Yuki KATO1, Shinichi TSUTSUMI2, Nobuyuki FUJIWARA1, Hideki YAMAMOTO1,
1 Kansai University, Osaka
2 Panasonic Corporation, Osaka <100030-1>
PB334 “Characterization of the Particle Cohesion by the Pressure Drop Monitoring in a Fluidized Bed,”
Wan-Yi HSU1, An-Ni HUANG1,2, Xuan WANG1, Hsiu-Po KUO1,2,
1 D. Chem. Mater. Eng., Chang Gung University, Taoyuan
2 D. Otolaryngology-Head & Neck Surgery, Linkou Chang Gung Memorial Hospital, Taoyuan <100254-2>
PB335 “Numerical study on fine particles behavior in an incinerator by coarse-graining DEM,”
Putri Mustika WIDARTININGSIH1, Yuki MORI1, Mikio SAKAI2,
1 D. Nuclear Eng. Manag., Sch. Eng., The University of Tokyo, Tokyo
2 Resilience Eng. Res. Center, Sch. Eng., The University of Tokyo, Tokyo <100409-1>
PB336 “Establishment of a novel universal index to predict particle packing ability for various slurries,”
Nana KITAI1, Naoya IWATA1, Takamasa MORI2,3, Hiroshi SATONE3,4,
1 G. S. Sci. Eng., Hosei University, Koganei
2 D. Chem. Sci. Tech., F. Biosci. Appl. Chem., Hosei University, Koganei
3 Hosei University Res. I. Slurry Eng., Koganei, Tokyo
4 D. Mech. Sys. Eng., G. S. Eng., University of Hyogo, Himeji <100480-1>
PB337 “Alteration of lipid bilayer permeability and structure of liposomes using gas-liquid flow,”
Makoto YOSHIMOTO, Tetsuya FUJIE, Yusuke NAKANO,
D. Appl. Chem., Yamaguchi University <100763-1>
PB338 “Effects of relaxation time of solutions on vortex deformation and turbulence statistics in two-dimensional turbulent flow,”
Kengo FUKUSHIMA, Ruri HIDEMA, Hiroshi SUZUKI,
Kobe University, Kobe <100768-1>
PB339 “Study on the fixed salt removal effect by fine bubble,”
Yuji MIKASA1, Naoya YAMAWAKI1, Hiroaki SHIDA2, Hayato OKUMURA3, Shigenori AKAMATSU3, Yusuke NISHIUCHI3, Takashi HATA3,
1 National Institute of Technology (Kosen), Kochi College, Nankoku
2 Ligaric Co., Ltd, Suita, Osaka
3 D. Soc. Design Eng., National Institute of Technology (Kosen), Kochi College, Nankoku, Kochi <100940-1>
PB340 “Synthesis of ε-Fe2O3 particles using Sr2+ doped magnetite-silica core-shell particles,”
Atsuya TOWATA,
Mag. Pow. Metallurgy Res. Cen., The National Institute of Advanced Industrial Science and Technology (AIST), Nagoya <101081-1>
PB341 “Improvement of mixing performance for highly viscous fluid using asymmetrical anchor blades,”
Marina YAHATA1, Takafumi HORIE1, Yoshiyuki KOMODA1, Naoto OHMURA1,
1 Kobe University, Kobe <101153-1>
PB342 “Synthesis of red light emitting Si nano-particles in liquid phase,”
Keiichiro ISHIHARA1, Yoshiko TSUJI1,2,
1 D. Chem. Sys. Eng., the University of Tokyo, Tokyo
2 Env. Sci. Cen., the University of Tokyo, Tokyo <101293-1>
PB343 “Optimal conditions of paddle shape and rotational speed for flow homogenization inside honeycomb,”
Hiroki UCHIYAMA, Takehiro ESAKI, Yousuke MATSUKUMA,
Fukuoka University, Fukuoka <101354-1>
PB344 “Vibro-fluidized bed separation of particulate construction waste residue based on density-segregation,”
Tetsuaki MATSUOKA1, Takamasa YOKOUCHI1, Jun OSHITANI1, Yoshihide MAWATARI2,
1 Okayama University of Science, Okayama
2 Kyushu Institute of Technology, Kitakyushu <100158-1>
PB345 “Coating of ibuprofen crystal with products from hydrothermal hydrolysis of polysaccharides,”
Ryo OSONE, Junichi SAKABE, Toshitaka FUNAZUKURI,
Chuo University, Tokyo <100458-1>
PB346 “Generation, identification and characterization of ultrafine bubbles in water,”
Takashi GOSHIMA, Susumu NII,
Kagoshima University, Kagoshima City, Kagoshima <100565-1>
PB347 “Experimental study on jet asymmetry of two-component layer impinging stream mixer,”
Jianwei ZHANG, Yuhang YAN, Fanrong MA, Yifan ZHANG, Xinli SHA,
Sch. Ene. Pow. Eng., Shenyang University of Chemical Technology, Shenyang <100797-1>
PB348 “Modeling and Numerical Study of Ceramic Paste Extrusion,”
Boris GOLMAN1, Piotr Skrzypacz1, Wittaya Julklang2,
1 Nazarbayev University, Nur-Sultan, Kazakhstan,
2 Suranaree University of Technology, Nakhon-Ratchasima <100911-1>
PB349 “Numerical simulation of gas-solids flow in bubbling beds with different internal structures,”
Jiang YUAN, SHI Xiaogang, LAN Xingying, GAO Jinsen,
China University of Petroleum, Beijing <100989-1>
PB350 “Development of new synthesis method for hollow polymer particles,”
Yusuke KAWAI, Tetsuya YAMAMOTO,
G. S. Mater. Design Innov. Eng., Nagoya University, Nagoya <101110-1>
PB351 “Effect of geometrical configuration of baffles on mixing performance in a stirred vessel,”
Eri SATO1, Hiroo HORIFUCHI2, Takafumi HORIE1, Yoshiyuki KOMODA1, Naoto OHMURA1,
1 Kobe University, Kobe
2 Sumitomo Heavy Industries Process Equipment Co., Ltd., Saijyo, Ehime <101154-1>
PB352 “Formation Mechanism of Dead Water Region and Its Influence on Solute Transport in Irregular-Shaped Micro Channels,”
Kizuki TOYAMA, Fumina TOGI, Tetsumi KUBOTA, Shusaku HARADA,
Hokkaido University, Sapporo <101172-1>
PB353 “Measurement of microbial adhesive forces using parallel plate flow chamber and atomic force microscopy,”
Takumi MATSUMOTO, Akinori YOSHIHARA, Yasuhiro KONISHI, Toshiyuki NOMURA,
Osaka Prefecture University, Sakai <101321-1>
PB354 “Experiment and CFD simulation of flow characteristics in stairs model,”
Hiroki UCHIYAMA, Yuuta HIRAKAWA, Ryuu FUKUSHIMA, Takehiro ESAKI, Yousuke MATSUKUMA,
Fukuoka University, Fukuoka <101354-2>
PB355 “CFD-PBM simulation of drop size distributions in a pump-mixer: Influence of the local turbulent dissipation,”
Han ZHOU, Shan JING, Shaowei LI,
I. Nuclear and New Energy Tech., Tsinghua University, Beijing <101453-1>
PB356 “Cluster characteristics in the jet mixing zone of fast fluidized bed,”
Zihan YAN, Yiping FAN, Chunxi LU, Chunming XU,
China University of Petroleum-Beijing <101495-1>
PB357 “Lagrangian analysis of solid particle concentration distribution in solid-liquid stirred tank with various particle concentration and impeller height,”
Masato KURODA, Shunnosuke IMAI, Ryuta MISUMI, Meguru KAMINOYAMA,
Yokohama National University, Yokohama <101509-1>
PB358 “Evaluation of mixing performance in Porous Hollow Fiber Membrane device,”
Yuka NAKAHARA, Shuji OHSAKI, Hideya NAKAMURA, Satoru WATANO,
D. Chem. Eng., Osaka Prefecture University <101520-1>
PB359 “Experimental measurement of particle sedimentation in modified raceway ponds,”
Ryunosuke OSAKA1, Yoshiaki UEDA2, Yusuke SAKAI3,
1 Graduate Student, Setsunan University, Neyagawa, Osaka
2 Setsunan University, Neyagawa, Osaka
3 Kumagai Gumi Co.Ltd., Shinjyuku, Tokyo <100157-1>
PB360 “Formation and Evaluation of Au/ZnO Particles by Spray Pyrolysis Method,”
Young-Jun LEE1, Toshiyuki FUJIMOTO2, Shinya YAMANAKA2, Yoshikazu KUGA3,
1 Division of Engineering, Muroran Institute of Technology, Muroran
2 College of Environmental Technology, Muroran Institute of Technology, Muroran
3 Muroran Institute of Technology, Muroran <100290-1>
PB361 “Langevin Dynamics Calculation of Brownian Coagulation Coefficient for Spherical Equal-size Aerosol Particles in Transient Regime,”
Toshiyuki FUJIMOTO1, Shinya YAMANAKA1, Yoshikazu KUGA2,
1 College of Environmental Technology, Muroran Institute of Technology, Muroran
2 Muroran Institute of Technology, Muroran <100291-1>
PB362 “Optimum mixing ratio of sewage sludge and food waste in cylingrical agitated vessel for composting,”
Young Sei LEE, Kiyoung LEE,
Kyungpook National University, Sangju City, Gyeongbuk, Koera <100365-1>
PB363 “Constant drying rate of wet material containing solvent with low-boiling point,”
Yutaro KODA, Yuji TATEMOTO,
Shizuoka University, Hamamatsu, Shizuoka <100416-1>
PB364 “Flow pattern analysis of self-induced sloshing due to bubble flow in a rectangular vessel,”
Ryohei AOKI1, Satoko FUJIOKA2, Koichi TERASAKA2,
1 School of Science for Open and Environmental Systems, G. S. Sci. Tech., Keio University
2 D. Appl. Chem., F. Sci. Tech., Keio University <100451-1>
PB365 “Observation of pseudo plume behavior by hydrate sedimentary layer decomposition,”
Yusuke TAKAHASHI, Ryosuke EZURE, Shun TAKANO, Hiroyuki KOMATSU, Kazuaki YAMAGIWA, Hideo TAJIMA,
Niigata University, Niigata <100542-1>
PB366 “Effect of homogenizer dispersion on particle size and size distribution in continuous production of silica microcapsules,”
Naoki KURODA, Takafumi HORIE, Ruri HIDEMA, Keita TANIYA, Kosuke SUZUKI, Yoshiyuki KOMODA, Yuichi ICHIHASHI, Satoru NISHIYAMA, Naoto OHMURA, Hiroshi SUZUKI,
Kobe University, Kobe <100658-1>
PB367 “Drag coefficients of a rising ellipsoidal droplet in a stagnant liquid,”
Hijiri MATSUBARA, Shunji HOMMA,
Saitama University, Saitama <100665-1>
PB368 “Particle impact energy variation with the size and number of particles in a planetary ball mill,”
Fumie HIROSAWA, Tomohiro IWASAKI, Masashi IWATA,
Osaka Prefecture University, Osaka <100687-1>
PB369 “Power characteristics of closed impellers with different geometries of flat blades for agitation,”
Masaya NAKATA, Hironori MATSUNAGA, Masanori YOSHIDA,
Muroran Institute of Technology <100700-1>
PB370 “Simulation analysis of the effects of adhesive force distributions in a particle bed on improving discharge particle flowability,”
Mai KOMORI, Atsuko SHIMOSAKA, Mikio YOSHIDA, Yoshiyuki SHIRAKAWA,
Doshisha University, Kyotanabe, Kyoto <100808-1>
PB371 “Coagulation of latex particles in the aqueous dispersion of epoxy resin,”
Takahashi TORU, Komoda YOSHIYUKI, Ohmura NAOTO,
Kobe University, Kobe <100869-1>
PB372 “Electrophoretic classification based on differences in electrophoretic mobility caused by change in the applied electric field,”
Kosei ONO, Tomonori FUKASAWA, Toru ISHIGAMI, Kunihiro FUKUI,
D. Chem. Eng., G. S. Eng., Hiroshima University, Hiroshima <100947-1>
PB373 “Direct Measurement of Fluid Pressure in Gas-Solid Fluidized Bed by Capsule-type Sensor,”
Yuji HONDA1, Shiori SAITO1, Tetsuya ANZAI1, Shusaku HARADA1, Shunsuke KATO2, Jun OSHITANI2, Yuya SAKAMOTO3, Takuya TSUJI3, Hirokazu KAJIWARA4, Kei MATSUOKA5,
1 Hokkaido University, Sapporo
2 Okayama University of Science, Okayama
3 Osaka University, Osaka
4 Ebara Environmental Plant Co., Ltd., Tokyo
5 Ebara Corporation, Tokyo <101177-1>
PB374 “Preparation of TiO2-x/C nanocomposite by milling of titania and polypropylene,”
Daisuke ORITA1, Nobutaka TAKEZAWA2, Kazuhiko SAEKI2, Taiji MATSUMOTO2, Mamoru SENNA3, Yasuyoshi SEKINE4, Kyoko OKUYAMA4, Masahide SATO1, Noboru SUZUKI1,
1 Utsunomiya University, Utsunomiya
2 Industrial Technology Center of Tochigi Prefecture, Utsunomiya
3 Keio University, Yokohama
4 Nippon Coke & Engineering Co., Ltd., Tochigi <101430-1>
PB375 “Characterization of a technique to remove particles adhered on a surface using pulse air-jet blowings,”
Ami ISHII1, Ryoichi NAKAYAMA1, Norikazu NAMIKI1, Koya BABA2, Tomokatsu SATO2,
1 Kogakuin University,
2 Techno Ryowa Ltd. <101433-1>
PB376 “Development of non-contact evaluation method to evaluate aggregation degree of nano particles using fluorescence spectrum analysis,”
Yusuke ANDO, Noriaki SANO,
Kyoto University, Kyoto <101502-1>
PB377 (canceled) <101531-1>
PB378 “Investigation of the necessity of bottom punch movement in a rotary die-filling system,”
Kazuya TAKABATAKE1, Mikio SAKAI2,
1 D. Nucl. Eng. Manag., Sch. Eng., The University of Tokyo, Tokyo
2 Resilience Research Engineering Center, Sch. Eng., The University of Tokyo, Tokyo <100204-1>
PB379 “Starting Torque of Two Disk Turbines,”
Yukiya KUDO, Takanori KANEKO, Kazuhiko NISHI,
Chiba Institute of Technology <100782-1>
PB380 “Direct measurement of interaction forces between a yeast cell and a microbubble using atomic force microscopy,”
Satoshi KATO, Shohei YUMIYAMA, Yasuhiro KONISHI, Toshiyuki NOMURA,
Osaka Prefecture University, Sakai <101320-1>
PB381 “Numerical Simulation of Binary Particles in Vibrated Fluidized bed Using DEM-CFD Model Based on Particle-Scale Similarities,”
Jiang ZHAOHUA, Kenta RAI, Takuya TSUJI, Kimiaki WASHINO, Toshitsugu TANAKA,
Osaka University, Osaka Prefecture <101516-1>
PB382 (canceled) <101532-1>
PB383 (canceled) <100207-1>
Day 4, Thursday, September 26
10:45–12:00 Hall B
Oral session
Chairs: Ryuta MISUMI, Yokohama National University; Makoto YOSHIMOTO, Yamaguchi University
B402 “Simulation of polymer melt flow in a channel by using a hieratical approach,”
Takashi TANIGUCHI, Yuji HAMADA, Takeshi SATO,
D. Chem. Eng., Kyoto University, Kyoto <100894-1>
B403 (canceled) <100095-1>
B404 “Flow characteristics of drag-reducing surfactant solution,”
Takashi SAEKI, Aya KAIDE,
Yamaguchi University <100843-1>
B405 “Investigation of the effect of nanoparticles on microscopic wetting behavior of a nanoparticle suspension droplet on a substrate using phase-shifting ellipsometer,”
Eita SHOJI, Tatsuya YONEMURA, Takahiro KANEKO, Masaki KUBO, Takao TSUKADA, Atsuki KOMIYA,
Tohoku University, Sendai <100455-1>
B406 “Evaluation method for emulsification capacity using maximum shear rate distribution of liquid given by emulsification device,”
Aya TANAKA, Yoshihiro YOKOKAWA,
Shiseido Co., Ltd. <100232-1>
13:30–15:00 Hall B
Oral session
Chairs: Mikio SAKAI, the University of Tokyo; Hayato MASUDA, University of Shizuoka
B413 “Effects of emulsification parameter on droplet size distribution using SPG membrane emulsification,”
Ayaka NAKAJIMA, Masakazu NAYA, Hiroaki MATSUKAWA, Katsuto OTAKE, Atsushi SHONO,
Tokyo University of Science, Tokyo <100432-1>
B414 “Microdroplet generation in microfluidic flow-focusing device,”
Narin PAIBOON1, Suvimol SURASSMO2, Uracha Rangsardthong Ruktanonchai2, Apinan Soottitantawat1,
1 COE Particle and Mater. Proc. Tech., D. Chem. Eng., Chulalongkorn University, Bangkok
2 National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency, Pathumtani <100582-1>
B415 “Preparation of magnetorheological fluid using stabilizing additives,”
Aya KAIDE1, Makoto KANDA1,2, Takashi SAEKI1, Hiroshi TOCHIGI2,
1 Yamaguchi University, Ube
2 Cosmo Oil Lubricants Co., Ltd., Satte <100841-1>
B416 “Effect of hydrophobic fumed silica on the sedimentation stability of magnetorheological fluid,”
Makoto KANDA1, Hiroshi TOCHIGI1, Takashi SAEKI2, Aya KAIDE2,
1 Cosmo Oil Lubricants Co., Ltd., Satte
2 Yamaguchi University, Ube <100829-1>
B417 “Direct numerical simulation of flow resistivity and oil droplet coalescence on x-ray ct images of nonwoven fabrics filters,”
Mohammad Irwan Fatkhur ROZY, Masaki UEDA, Tomonori FUKASAWA, Toru ISHIGAMI, Kunihiro FUKUI,
D. Chem. Eng., Hiroshima University, Higashi-Hiroshima <100511-1>
B418 “Flow characteristics of non-Newtonian fluid (non-spinnability fluid),”
Katsuhide TAKENAKA1, Yoshihiro YOKOKAWA2, Aya TANAKA2, Koichiro ONISHI1,
1 Sumitomo Heavy Industries Process Equipment Co., Ltd., Saijo
2 Shiseido Co., Ltd., Osaka <100567-1>
15:30–17:00 Hall B
Oral session
Chairs: Yosuke MATSUKUMA, Fukuoka University; Toru ISHIGAMI, Hiroshima University
B421 “Distribution of local viscosity of viscoelastic solutions measured by using optical tweezers,”
Ruri HIDEMA1, Hikari TAKAHASHI1, Zenji YATABE2, Hiroshi SUZUKI1,
1 Kobe University, Kobe
2 Kumamoto University, Kumamoto <100755-1>
B422 “Computations of Curtain Coating,”
Ryota NAKAJIMA1, Takumi CHIBA1, Shunji HOMMA1, Donghyuk KANG1, Hiroyuki HIRAHARA1, Hirokazu UMEMIYA2, Sumihisa ODA2,
1 Saitama University, Saitama
2 Saiden Chemical Industry Co., Ltd., Saitama <100673-1>
B423 “Flow classification and its application to fluid processing,”
Yasuya NAKAYAMA, Toshihisa KAJIWARA,
Kyushu University, Fukuoka <100858-1>
B424 “Effect of agitation speed on ice cream properties in batch freezer,”
Hayato MASUDA1,2, Momoko SAWANO1, Kana ISHIHARA1, Makoto SHIMOYAMADA1,
1 Sch. Food and Nutritional Sci., University of Shizuoka, Suruga
2 Complex Fluid and Thermal Eng. Res. Center (COFTEC), Kobe University, Kobe <100343-1>
B425 “[Keynote] Bubble dynamics in gas-solid two-phase fluidised beds,”
Siddhartha SHRETHA, Shibo KUANG, Aibing YU, Zongyan ZHOU,
ARC Res. Hub for Comp. Particle Tech., D. Chem. Eng., Monash University <402003-1>