Technical Program — Session 3
Session Program
The technical program was fixed on Monday, September 9. Further changes are listed on the Program top page, if any.
The first letter of the presentation ID represents the hall. The second letter represents the day of the presentation (1: Mon., 2: Tue., 3: Wed., 4: Thu., 5: Fri.). The number in < > at the end of each presentation is the abstract ID.
Recent development of heat transfer phenomena and its relating process such as high efficient energy utilization and energy saving technology will be discussed. The session also widely covers material processing, unit operation and numerical modeling relating heat transfer from both of fundamental and application viewpoints.
Day 3, Wednesday, September 25
17:00–19:00 Hall P
PA301 “Effects of nano-hole size and porosity on equilibrium characteristics of calcium chloride in the microcapsules with nano-holes,”
Iori KANZAKI1, Hiroshi SUZUKI1, Ruri HIDEMA1, Keiko FUJIOKA2,
1 D. Chem. Sci. Eng., Kobe University
2 Functional Fluids Ltd. <100725-1>
PA302 “On Al synthesis, Morphology Control and Heat Transfer Application of Carbon Nanotubes,”
Mayu ASAKA1, Hisashi SUGIME1, Aun OTA2, Hisayoshi OSHIMA2, Suguru NODA1,
1 Waseda University, Tokyo
2 DENSO CORPORATION, Aichi <100492-1>
PA303 “Theoretical study on heat transfer mechanism of confined nanofluid containing graphene flakes,”
Eun Min GO, Eunhye SHIN, Sang Kyu Kwak,
D. Ene. Eng., Sch. Ene. Chem. Eng., Ulsan National Institute of Science and Technology (UNIST), Ulsan <101221-1>
PA304 “Hydrothermal synthesis of functionalized copper nanowire and its application for hydrofluorocarbon-base nanofluid with enhanced thermal conductivity,”
Sarii YAMAGUCHI, Shohei KANAZAWA, Masahide SATO, Takeshi FURUSAWA, Noboru SUZUKI,
D. Mater. Env. Chem., Utsunomiya University <101039-1>
PA305 “Numerical simulation of the transport phenomena occurring in the Bottom Seeded Solution Growth (BSSG) process of SiC,”
Jiangao ZHANG1, Taichi YOSHIMURA1, Atsushi SEKIMOTO1, Takahiko BAN1, Yasunori OKANO1, Hossein Khodamoradi2, Toru UJIHARA3, Sadik Dost4,
1 D. Mater. Eng. Sci., Osaka Univerisity, Osaka
2 Physics D., Bu-Ali Sina University, Hamedan
3 D. Crystalline Mater. Sci., Nagoya Univerisity, Nagoya
4 Crystal Growth Lab., Univerisity of Victoria, Victoria <100375-1>
PA306 “Direct numerical simulation of turbulent heat transfer in a plane channel flow with stable density stratification,”
Liya WANG, Atsushi SEKIMOTO, Yasunori OKANO,
D. Mater. Eng. Sci., G. S. Eng. Sci., Osaka University, Osaka <100394-1>
PA307 “Simulation of a thin film evaporator for polymer solution,”
Shohei TANINO,
Kaneka Corporation, Takasago <100221-1>
PA308 “Thermo-irreversible supramolecular hydrogel using an imine bond that visualizes thermal hysteresis,”
Yudai TOMINAGA, Yuki NISHIDA, Shota YAMAMOTO, Tatsuo MARUYAMA,
Kobe University, Kobe <100457-1>
PA309 “Simulation of energy balances for installation of thermal energy storage at paper mills in Japan,”
Ayumi YAMAKI, Yuichiro KANEMATSU, Yasunori KIKUCHI,
the University of Tokyo, Tokyo <100037-1>
PA310 “Interfacial tension between decane-water with Triton X-100 and different concentration of NaCl by microwave irradiation,”
Yosuke SHIBATA1, Satoshi SONOBE1, Yusuke ASAKUMA1, Anita Hyde2, Chi Phan2,
1 University of Hyogo
2 Curtin University <100732-2>
PA311 “Homogenization method for thermal radiation of a packed bed of binary particles,”
Yusuke ASAKUMA2, Itsuro HONDA2, Tsuyoshi YAMAMOTO1,
1 Kyushu University
2 University of Hyogo <101193-1>
PA312 “Effect of external magnetic field on long DC arc characteristics with ring-shaped anode,”
Akio HASHIZAWA1, Manabu TANAKA1, Takayuki WATANABE1, Tomohiro KOGA2,
1 D. Chem. Eng., Kyushu University
2 Clean Technology Co. Ltd. <100788-1>
PA313 “Analysis of thermal and light properties of greenhouse considering greenhouse sheets characteristics in hot and h humid area in Asia,”
Seiji MATSUO1, Yuki HONZAWA1, Toyohisa FUJITA, Yasunaga IWASAKI2,
1 The University of Tokyo, Tokyo
2 National Agriculture and Food Research Organization, Tsukuba <100397-2>
PA314 “Establishment of microwave thawing calculation method for heterogeneous food,”
Yasuaki TAGUCHI1, Mika FUKUOKA1, Naoki YOSHIOKA2, Tomonori HOSODA2, Takashi KIMURA2, Kayoko ONIZAWA2, Noboru SAKAI1,
1 Tokyo University of Marine Science and Technology, Tokyo
2 KUREHA CORPORATION, Tokyo <101412-1>
PA315 “Measurement of internal temperature distribution of double film robber heat exchanger,”
Tomoya KANAI1, Nobuhiro MARUOKA2, Hiroshi NOGAMI2,
1 G. S. Eng., Tohoku University,
2 Institute of Multidisciplinary Research for Advanced Materials, Tohoku University <101447-1>
PA316 “Modeling of atmospheric freeze-drying of food product operated above glass transition temperature,”
Nakabayashi, M.1, KOBAYASHI, T.1, NAKAGAWA, K.2,
1 G. S. Agriculture, Kyoto University, Kyoto
2 G. S. Eng., Kyoto University, Kyoto <101527-1>
Day 4, Thursday, September 26
10:30–12:00 Hall E
Oral session
Chairs: Manabu TANAKA, Kyuushu University; Yasunori OKANO, Osaka University
E401 “[Invited] Buoyancy effect on the secondary flow and heat transfer in a marginally turbulent square duct,”
Atsushi SEKIMOTO, Mizuki NAKAMORI, Yasunori OKANO,
Osaka University, Toyonaka, Osaka <100355-1>
E402 “Heat transfer from a semi-circular cylinder to a Newtonian fluid under rectangular confinement,”
Avinash CHANDRA1, Arvind Kumar Gautam2, Raj Kumar Arya3,
1 D. Chem. Eng., Thapar Institute of Engineering & Technology, Patiala
2 D. Chem. Eng., National Institute of Technology, Hamirpur
3 D. Chem. Eng., Dr. B. R. Ambedkar National Institute of Technology, Jalandhar <101311-1>
E403 “Flow and Sedimentation Characteristics of Hard-Shell Microcapsule Slurries Including Phase Change Materials Treated with Additives,”
Sohei USA1, Ruri HIDEMA1,2, Keita TANIYA1,2, Takafumi HORIE1,2, Yoshiyuki KOMODA1,2, Yuichi ICHIHASHI1,2, Satoru NISHIYAMA1,2, Naoto OHMURA1,2, Hiroshi SUZUKI1,2,
1 D. Chem. Sci. Eng., Kobe University
2 Complex Fluid and Thermal Engineering Research Center, Kobe University <100740-1>
E404 “Investigation of correlation between phase separation structures and melt convection in Cu-Co molten alloys using neutron CT and DNS,”
Shosei ISOGAI1, Eita SHOJI1, Masaki KUBO1, Takao TSUKADA1, Tetsuya KAI2, Takenao SHINOHARA2, Yoshihiro MATSUMOTO3, Hiroyuki FUKUYAMA1,
1 Tohoku University, Sendai
2 Japan Atomic Energy Agency, Tokai-mura
3 Comprehensive Research Organization for Science and Society, Tokai-mura <100772-1>
E405 “[Keynote] Functional material fabrication and thermophysical property measurement using Containerless processing,”
Jianding YU,
State Key Lab. High Perform. Ceram. Superfine Microstruct., Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai <403001-1>
13:30–15:00 Hall E
Oral session
Chairs: Yusuke ASAKUMA, University of Hyogo; Atsushi SEKIMOTO, Osaka University
E413 “Large eddy simulation of piloted methane/air jet flame using flamelet based tabulated chemistry,”
Shota AKAOTSU1, Ryoma OZAWA1, Yohsuke MATSUSHITA1, Hideyuki AOKI1, Weeratunge Malalasekera2,
1 D. Chem. Eng., Tohoku University, Sendai
2 Sch. Mech., Elec. Manufact. Eng., Loughborough University, Loughborough <100198-1>
E414 “Combustion of hydrogen-methane/air diffusion flame on a micro-jet array burner,”
Jun LI1, Noriyuki KOBAYASHI1, Takeshirou ITOU2, Kouichirou TANAHASHI2, Hiroyuki MATSUDA2, Kenji ITOU3, Syouji YOSHIMOTO4, Kazuhiko SAKAGIBARA4, Mitsuhiko MIYACHI5, Hongyu HUANG6,
1 G. S. Eng., Nagoya University, Nagoya
2 Ito Racing Service Co., Ltd., Okazaki
3 Seto Ceram. Tech. Cen., Aichi Center for Industry and Science Technology, Seto
4 Tokoname Ceram. Tech. Cen., Aichi Center for Industry and Science Technology, Tokoname
5 Alpha System Co., Ltd., Nagoya
6 Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou <100211-1>
E415 “[Invited] Investigation of temperature fluctuation of diode-rectified multiphase AC arc by high-speed visualization,”
Manabu TANAKA, Hiroki MARUYAMA, Yuta KUGIMIYA, Takayuki WATANABE, Tsugio MATSUURA,
Kyushu University, Fukuoka <100710-1>
E417 “Development of composite pellet of calcium carbonate for thermochemical energy storage,”
Rui GUO1, Hiroki TAKASU2, Shigehiko FUNAYAMA1, Seon Tae KIM2, Yukitaka KATO2,
1 D. Chem. Sci. Eng., Sch. Mater. Chem. Tech., Tokyo Institute of Technology. Tokyo
2 I. Innov. Res., Tokyo Institute of Technology. Tokyo <101079-1>
E418 “Thermal performance of heat exchanger using zeolite/vapor adsorption,”
Soichiro OHNO, Shuji HIRONAKA, Jun FUKAI,
Kyushu University <100767-1>
15:30–17:00 Hall E
Oral session
Chairs: Hiroshi SUZUKI, Kobe University; Eita SHOJI, Tohoku University
E421 “[Keynote] On the performance enhancement of spray cooling with the inverse Marangoni effect: chasing the heat,”
Sung TSANG, Chia-Hsuan LIN, Chen-li SUN,
National Taiwan University, Taipei <403002-1>
E423 “Effect of Marangoni convection in a droplet containing surfactant on thin film shape,”
Kazuki MATSUDA, Tensin OYAMA, Hirotaka ISHIDUKA, Shuji HIRONAKA, Jun FUKAI,
Kyushu University <100780-1>
E424 “Formation mechanism of amorphous silicon nanoparticles synthesized by induction thermal plasma,”
Xiaoyu ZHANG, Kentaro YAMANO, Ririko HAYASHIDA, Hirotaka SONE, Manabu TANAKA, Takayuki WATANABE,
Kyushu University, Fukuoka <100969-1>
E425 “Screening and Performance Evaluation of Hydrogen Bond Donors (HBDs) and Acceptors (HBAs) as CH4 hydrate inhibitors,”
Woojin GO1, Dongyoung LEE1, Ki-Sub KIM2, Yongwon SEO1,
1 Sch. Urban Env. Eng., Ulsan National Institute of Science and Technology, Ulsan
2 Sch. Chem. Mater. Eng., Korea National University of Transportation, Chungbuk <100445-1>
E426 “Stable operation of rotary stoker furnace for industrial waste,”
Koichi SHINOHARA1,2, Daisuke KONO1, Masayoshi MINAKAMI1, Tatsuya KAWAJIRI1, Shuji HIRONAKA2, Jun FUKAI2,
1 TSUNEISHI KAMTECS CORPORATION
2 Kyushu University <100694-1>