Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall A, Day 2 | |||||
(13:00–15:30) (Chair: No data ) | |||||
A201 | Solid electrolytes for intermediate-temperature solid oxide fuel cells | solid oxide fuel cell solid electrolyte oxyfluoride | S-3 | 109 | |
Poster presentation | |||||
A202 | Promotion of Fermentation by Freeze-Dried Fixed Bed of Yeast | Freeze Dry Yeast Fermentation Fixed Bed | S-3 | 15 | |
A203 | Synthesis of carbon nanotubes inside porous stainless and application to glucose fuel cell | carbon nanotube stainless steel synthesis | S-3 | 20 | |
A204 | Improvement of the Steam Ejector for Hydrothermal Treatment of Sewage Sludge | Sewage sludge Hydrothermal treatment Steam ejector | S-3 | 39 | |
A205 | Direct epoxidation of cellulose in ionic liquid mixture | Biomass Ionic liquid Catalytic reaction | S-3 | 105 | |
A206 | Investigation of microalgal cultivation in a cascade photobioreactor using computational fluid dynamics | Computational fluid dynamics Open FOAM Microalgae | S-3 | 22 | |
A207 | purification of silicon kerf retrieved from wire-slice waste fluid | purification silicon kerf | S-3 | 27 | |
A208 | Effect of microwave on Liesegang precipitation and diffusion behaviors | diffusion microwave precipitation | S-3 | 8 | |
A209 | Analysis of ionic conductivity of BCP type solid polymer electrolyte with ionic liquid | ionic liquid polymer electrolyte phase structure | S-3 | 84 | |
A210 | Accuracy verification on numerical simulation of gas-liquid multiphase jet | multiphase flow turbulence model numerical simulation | S-3 | 28 | |
A211 | Simple production of a Dye-sensitized solar cell using titanium oxide fibers as electrode | Dye-sensitized solar cell titanium oxide electro spinning deposition | S-3 | 32 | |
A212 | Observation of liquid-liquid interface under microwave irradiation | interface microwave | S-3 | 38 | |
A213 | Molecular Dynamics of Mutual Anti-Solvent Crystallization | Molecular Dynamics Quarter Mutual Anti-Solvent Crystallization | S-3 | 11 | |
A214 | Molecular modeling of ordered mesoporous silica for prediction of adsorption behavior | surface roughness X-ray diffraction analysis adsorption hysteresis | S-3 | 31 | |
A215 | Melt Crystallization for Purification of Waste Cooking Oil as Biofuel | melt crystallization effective distribution coefficient growth rate of crystal | S-3 | 41 | |
A216 | Control for diffusion and convection by microwave irradiation – in-situ observation for oscillation reaction of BZ drop | microwave diffusion convection | S-3 | 16 | |
A217 | Synthesis of core-shell type conductive filler in ionic liquids | ionic liquid core-shell conductive | S-3 | 83 | |
A218 | Development of separation and recycling process of phosphorus from bonding treatment sludge using ion exchange fiber | Adsorpion Separation Ion exchange | S-3 | 47 | |
A219 | An Examination of Molecular Dynamics Simulation for Boiling and Bubble Behavior | Molecular Dynamics Simulation Bubbles Nucleate Boiling | S-3 | 36 | |
A220 | Effect of microwave irradiation on bubble formation of ethylene glycol water solution | microwave bubble formation DLS | S-3 | 37 | |
A221 | Control of phase structure of epoxy polymer alloys with two-type curing | epoxy resin phase structure fracture toughness | S-3 | 104 | |
A222 | Development of a numerical model for iPS cell culture based on transport phenomena in a culture medium | iPS cells mass transfer numerical simulation | S-3 | 71 | |
A223 | Effect of High Pressure on Charge-Discharge Cycle of Nickel Battery | Nickel Hydrogen Battery High Pressure Crystallization Charge-Discahrge | S-3 | 14 | |
A224 | Surface tension of nanofluid under microwave radiation | nanoparticle microwave surfacetention | S-3 | 5 | |
A225 | Evaluation of emitter formation technology by flash lamp | Emitter flash lamp solar cells | S-3 | 26 | |
A226 | Synthesis of functional metallic nanoperticles from recovery of rare metal ions in waste water by a bioreduction | Bioseparation Shewanella algae Functional metallic nanoparticles | S-3 | 35 | |
A227 | Crystallization Model for Lead-Acid Battery under High Pressure | Crystallization Lead-Acid Battery High Pressure | S-3 | 1 | |
A228 | In-situ observation for bubble formation of aqueous solution during and after microwave irradiation | bable formation DLS microwave | S-3 | 7 | |
A229 | Relationship of cell membrane properties and allergic reactions of mast cells | cell membrane allergy degranulation | S-3 | 77 | |
A230 | Stress relaxation of SI/SIS block copolymer blends | Stress relaxation block copolymer phase structure | S-3 | 85 | |
A231 | Characteristics of AlOx passivation films prepared by mist CVD method | Passivation solar cells CVD | S-3 | 25 | |
A232 | Photocatalytic microreactor using nanostructured titania | photocatalyst nanostructured titania microreactor | S-3 | 78 | |
A233 | Simulation of particle layer compression with fracture | simulation particle layer fracture | S-3 | 30 | |
A234 | Improvement of emitter performance for crystalline silicon solar cells | Emitter Solar cells Diffusion | S-3 | 24 | |
A235 | The resolvability of the organic compounds by advanced oxidation processes | advanced oxidation processes the resolvability of the organic compounds wastewater treatment | S-3 | 113 | |
A236 | The Effect of High Pressure on the Electroless Nickel Plating | electroless nickel plating high pressure plating rate | S-3 | 42 | |
A237 | (withdrawn) | 100 | 106 | ||
A238 | study on retrieve technology of abrasive from wire-slice waste fluid | Solid-liquid separation sedimentation | S-3 | 23 | |
A239 | Influence of multi-component interactions on food drying | drying, water activity diffusion | S-3 | 115 | |
A240 | Oscillation, surface tension and convection behavior of pendant drop under microwave irradiation | microwave surface tension convection | S-3 | 17 | |
A241 | Production Method of Biodiesel by Circulating Reactor of Novozym | Novozym Fixed Bed Reactor Batch Reactor | S-3 | 10 | |
A242 | Reserchi and Development of NORITZ | hot water heater burner exchanger | S-3 | 9 | |
A243 | Itroduction of DSL. Japan Co., Ltd and our technology | DSL.Japan Silica technology | S-3 | 65 | |
A244 | Overview of Fujilight Industrial Co.,LTD | Fujilight Industrial | S-3 | 67 | |
A245 | BUNSEN Inc. Profile | BUNSEN nori-tukudani konbu-tukudani | S-3 | 69 | |
A246 | Nonwovens by the melt-spinning nanofiber process | nonwovens melt-spinning nanofiber | S-3 | 70 | |
A247 | topics | plant clean eng | S-3 | 72 | |
A248 | Overview of A.L.M.T. Corp. | A.L.M.T. Corp. | S-3 | 81 | |
A249 | Technology introduction of Kimura Chemical Plants co., Ltd. (Kimura Chemical Plants. Co., Ltd. R&D Dept.) Sasabe Kei | MVR Tube reactor Evaporation | S-3 | 111 | |
A250 | High efficiency drying technology at low temperature using vacuum drum dryer | Drum dryer Vacuum drying High efficiency drying | S-3 | 117 | |
A251 | Development of the stabilization and energy saving of liquid-liquid-extraction technology in a bioprocess | Liquid-Liquid extraction Bioprocess Saving energy | 7-a | 116 | |
A252 | Continuous Living Cationic Polymerization of Isobutylene Using Micro Reactor | Microreactor Polymerization Tubular reactor | 5-f | 112 | |
A253 | Validation of Model for Bubble Breakup by Shear Flow in Gas-liquid Stirred Tank | Bubble Breakup Stirred Tank Bubble Diameter | 2-e | 114 | |
A254 | _ | _ | S-3 | 125 | |
A255 | _ | _ | S-3 | 126 | |
A256 | _ | _ | S-3 | 127 | |
A257 | _ | _ | S-3 | 128 | |
A258 | _ | _ | S-3 | 129 | |
A259 | _ | _ | S-3 | 131 |