23rd SCEJ Students Meeting (2021): Hall program

`23rd SCEJ Students Meeting (2021)`

Hall program

Hall B

Most recent update: 2021-03-04 21:47:01

Time	Paper ID	Title / Authors	Keywords	Topic code	Ack. number
Fluid & particle processing
(9:00–10:24) (Chair: No data , No data )
9:00– 9:12	B01	Thermal flow analysis in a mold during the LCP injection molding filling process (Osaka U.) *Takayoshi Junya, (Graduate School of Osaka U.) Hu Haotian, (Polyplastics) Hamano Yusuke, Aoki Gen, (Graduate School of Osaka U.) Okano Yasunori	Injection Molding OpenFOAM DEM	2-a	206
9:12– 9:24	B02	Numerical Analysis of nozzle flow during 3D bioprinting ink switching (Osaka U.) *Yamamoto Seishiro, Hidaka Mitsuyuki, Sakai Shinji, Kojima Masaru, Okano Yasunori	VOF model OpenFOAM Bioprinting	2-e	282
9:24– 9:36	B03	Study on Particle Size Distribution Prediction Equations for Droplet Atomization (Gifu U.) *Yada Tokiha, Kamiya Tomohiro, Mizuno Kyohei, Asahara Makoto, Miyasaka Takeshi	atomaization droplet size distribution shadow sizing method	2-e	326
9:36– 9:48	B04	Development and optimization of silica hollow particles using microbubbles (U.Yamagata) *Takahashi M., Makuta T.	silica microbubbles hollow particles	2-e	211
9:48– 10:00	B05	Fluid dynamics of liquid rope-coils in micro-channel (Tokyo U.Sci) *Shinotsuka R., (Office Murozono) Murozono K., (Tokyo U.Sci.) Murakami Y., Matsukawa H., Otake K., Shono A.	Microfluidics Liquid rope-coil effect Particle method	2-e	83
10:00– 10:12	B06	Research Regarding the Fluidization Characteristics of Micro-Fluidized Beds (NIT Sasebo) *Jones James, Maeda Taisuke, Tsurusaki Yuuto, Hamada Hiroyasu, Johno Yuuki	Fluidized bed Microreactor Numerical simulation	2-c	215
10:12– 10:24	B07	Research on Floating Separation of Microplastics (NIT Sasebo) *Murakami Wataru, Tanabe Shogo, Tanaka Yasuhiko, Matsuyama Fuminori, Nakashima Kenji, Johno Yuuki	Fine bubble Microplastic Floating Separation	2-e	219
10:24– 10:36		Break
Fluid & particle processing
(10:36–12:00) (Chair: No data , No data )
10:36– 10:48	B09	Three dimensional numerical Analysis of curtain coating (Saitama U.) *Togashi Kota, Chiba Kotaro, Homma Shunji	curtain coating adhesive CFD	2-a	126
10:48– 11:00	B10	Effects of Preparation Pressures on the Production of Caffeine Microparticles by Spray Drying Using High Pressure CO₂ (Kanazawa U.) *Matsuoka H., Xie B., Yamashita T., Uchida H.	Spray drying High pressure CO2 Caffeine micronization	2-f	269
11:00– 11:12	B11	Evaluation of dielectric properties of alumina composites with CNT for hybrid heating (HiroshimaU.) *Yamada M, (JAEA) Segawa T, (HiroshimaU.) Fukasawa T, Ishigami T, Fukui K	CNT uniformity Dielectric properties	2-f	203
11:12– 11:24	B12	Development of a novel jet mill and evaluation its milling performance (Osaka Pref. U.) *Matsunaga Miku, Ohsaki Shuji, Nakamura Hideya, Watano Satoru	Dry grinding Fluidized bed jet mill Classification	2-f	232
11:24– 11:36	B13	Numerical analysis for high-speed tableting process (Osaka Pref. U.) *Imayoshi Yusuke, Ohsaki Shuji, Nakamura Hideya, Watano Satoru	Compression speed Tableting process Finite Element Method	2-f	100
11:36– 11:48	B14	Cohesive force in DEM simulation for simulating noodle dough (Okayama U. Sci.) *Sasaki Yui, Kuwagi Kenya, Hirano Hiroyuki	Powder Discrete Element Method Cohesive force	2-f	223
11:48– 12:00	B15	DEM Numerical Analysis of Powder Flow with Liquid Bridging (NIT Sasebo) *Matsunaga Kanta, Hamada Hiroyasu, Matsuyama Fuminori, Nakashima Kenji, Johno Yuuki	Discrete Element Method Powder Liquid bridge	2-f	221
12:00– 12:12		Lunch break
Fluid & particle processing, Thermal engineering
(13:00–14:24) (Chair: No data , No data )
13:00– 13:12	B21	Synthesis of porous calcium carbonate by adding citric acid (Muroran Inst. Technol) *Sakawaki Daichi, (Asahi Kohmatsu) Kitano Sayaka, Endo Aimi, Akimoto Yuki, (Muroran Inst. Technol) Yamanaka Shinya	Specific surface area Modified carbonation process Amorphous calcium carbonate	2-f	294
13:12– 13:24	B22	Synthesis of porous carbon particles derived from lignin by spray drying and their characteristic evaluation (Hiroshima U.) *Kitamoto Y., Cao K., Ogi T.	Lignin Spray drying EDLC	2-f	207
13:24– 13:36	B23	AFM measurement of fine particle adhesion to the solid interface in the gaseous phase (Osaka Pref. U.) *Yamato Yutaro, Nomura Toshiyuki	AFM Adhesion force Frictional force	2-f	233
13:36– 13:48	B24	Development of continuous manufacturing system for pharmaceutical solid formulations using a twin-screw extruder (Osaka Pref. U.) *Matsushita Miu, Ohsaki Shuji, Nakamura Hideya, Watano Satoru	Twin screw granulation Continuous processes Hold-up	2-f	194
13:48– 14:00	B25	Design of particles for 3D printer by spray dry (Osaka Pref. U.) *Ogawa Koki, Ohsaki Shuji, Nakamura Hideya, Watano Satoru	Spray dry 3D printer Flowability	2-f	151
14:00– 14:12	B26	Analysis of non-combustible heat insulation using sheet plate heat flux meter (Tokyo U.Sci.) *Iizawa S., (Nanodax Co.,Ltd) Fujita M., Sato N., (Tokyo U.Sci.) Murakami Y., Matsukawa H., Otake K., (Tokyo U. Sci.) Shono A.	thermal conductivity insulation porous media	3-b	44
14:12– 14:24	B27	Research on the conditions of an aqueous solution suitable for eco-cairo (Mito First high schoolM) *Sugaya Rio, (Mito First H.S.) Kushida Masahiko	super cooling heat of solidification eco-cairo	3-f	176
14:24– 14:36		Break
Chemical reaction engineering
(14:36–16:00) (Chair: No data , No data )
14:36– 14:48	B29	Effect of catalyst preparation for silver-supported catalyst on epoxidation of propylene (Tokushima U.) *Hashimoto K., Okitsu I., Shimoda N., Katoh M., Sugiyama S., (Mitsubishi Chem.) Kato Y., Ninomiya W.	propylene epoxidation silver	5-a	4
14:48– 15:00	B30	Dehydrogenation of isobutane over nickel oxide catalyst supported on alpha-alumina (Tokushima U.) *Koizumi A., Yoshida T., Shimoda N., Katoh M., Sugiyama S., (Mitsubishi Chem.) Kato Y., Ninomiya W.	isobutane nickel oxide dehydrogenation	5-a	3
15:00– 15:12	B31	Preparation of oxygen-containing compounds by catalytic partial oxidation of propane (Tokushima U.) *Okawa R., Yoshida M., Shimoda N., Katoh M., Sugiyama S.	propane partial oxidation molybdenum-containing catalyst	5-a	2
15:12– 15:24	B32	Activity behavior of palladium-supported catalyst for hydrogenation dechlorination reaction of 2-chloropropene (Tokushima U.) *Hiwada Y., Endo S., Shimoda N., Katoh M., Sugiyama S.	palladium 2-chloropropene hydrogenation	5-a	1
15:24– 15:36	B33	Preparation of palladium supported catalysts using heat-treated nanodiamond supports and their activity for hydrogenation reaction (U.Gunma) *Tazawa N., Kannari N., Sato K.	nanodiamond palladium hydrogenation	5-a	111
15:36– 15:48	B34	Preferential oxidation of carbon monoxide by copper alumina catalysts prepared using the sol-gel method (U. Shizuoka) *Shibayama T., Takeishi K.	CO-PROX copper catalysts hydrogen	5-a	290
15:48– 16:00	B35	Metal-support interaction effect and structure analysis of alumina supported Ni catalysts (Tokushima U.) *Takahashi Ryota, Shimoda Naohiro, Katoh Masahiro, Sugiyama Shigeru	 Alumina supported Ni catalyst  Metal-support interaction  Hydrogen-temperature programmed reduction	5-i	150

Technical program
23rd SCEJ Students Meeting (2021)

© 2021 The Society of Chemical Engineers, Japan. All rights reserved.
Most recent update: 2021-03-04 21:47:01
For more information contact Organizing Committee, 23rd SCEJ Students Meeting (2021)
E-mail: inquiry-stu23

www3.scej.org

This page was generated by