Technical Program — Session 11

Session Program

The technical program was fixed on Monday, September 9. Further changes are listed on the Program top page, if any.

The first letter of the presentation ID represents the hall. The second letter represents the day of the presentation (1: Mon., 2: Tue., 3: Wed., 4: Thu., 5: Fri.). The number in < > at the end of each presentation is the abstract ID.

Session 11. Electronics materials and processes

Electrochemical engineering is a vital base for the electronics materials and processes and your submission of papers are highly encouraged.

Day 2, Tuesday, September 24

10:30–12:00 Hall G

Oral session

Chairs: Hitoshi HABUKA, Yokohama National University; Takeyasu SAITO, Osaka Prefecture University

G201 “[Keynote] Advanced interconnect technology and chemical engineering,”
Takeshi NOGAMI,
IBM Research <101143-1>

G203 “[Invited] Materials development support project for high current SiC power module ˜ KAMOME Project ˜,”
Akio TAKAHASHI, Hitoshi HABUKA,
Yokohama National University <411501-1>

G204 “Interesting and unexpected and phenomena observed at the joints of electronic products,”
Sinn-wen CHEN,
National Tsing Hua University, Hsinchu <100085-1>

G205 “Atomic Layer Etching of Dielectric Materials for Surface Cleaning,”
Yongjae KIM¹, Heeyeop CHAE^1,2,
¹ SKKU Advanced Institute of Nanotechnology(SAINT), Sungkyunkwan University (SKKU), Suwon
² Sch. Chem. Eng., Sungkyunkwan University (SKKU), Suwon <101252-1>

G206 (canceled) <101142-1>

17:00–19:00 Hall P

Poster session

PG201 “p-Type Doped Large-Area Multilayer MoS₂ Enabled by Mild Plasma Treatment for Phototransistors Application,”
Xiao-Mei ZHANG^1,2, Sian-Hong TSENG³, Ming-Yen LU³,
¹ D. Mecha. Eng., Tokyo Institute of Technology, Tokyo
² D. Chem. Sci. Eng., Tokyo Institute of Technology, Tokyo
³ D. Mater. Sci. Eng., National Tsing Hua University, Hsinchu <100554-1>

PG202 “Formation of ionic vacancy layer under vertical magnetic field,”
S. TAKAGI¹, Y. OSHIKIRI², I. MOGI³, R. AOGAKI^4,5, T. ASADA¹,
¹ Fukushima University G. S. Symbiotic Sys. Sci. Tech.
² Yamagata College of Industry and Technology
³ Tohoku University
⁴ National Institute for Materials Science
⁵ Polytechnic University <100082-1>

PG203 “Disposable electronic circuit based on the pH-responsible encapsulation layer,”
Kang-Han KIM, Yong-Cheol JEONG,
KITECH <100183-1>

PG204 “The effect of polymer guest on the inkjet printing process of OLED,”
Yong-Cheol JEONG,
KITECH <100183-2>

PG205 “Fabrication of SmC* Microcapsules and Molecular Alignment There,”
Eriko MORIWAKI, Takuya AKITA, Yoshiaki UCHIDA, Norikazu NISHIYAMA,
Osaka University, Toyonaka, Osaka <100189-1>

PG206 “Synthesis of copper/PANI composite with enhanced air-stability,”
Jae Eun Um¹, Sung Nam LIM², Myung Jo Jung¹, Tae Ja KIM¹,
¹ ELPANI Co., Ltd., Hwaseong
² Korea Institute of Industrial Technology, Ansan <100490-1>

PG207 (canceled) <100842-1>

PG208 “Synthesis of parallel carbon nanowalls and fabrication of anisotropic conductive films,”
Yusei MATSUMURA, Shinsuke MORI,
Tokyo Institute of Technology, Tokyo <100935-1>

PG209 (canceled) <101174-1>

PG210 “Wireless Sweat Sensing Device,”
Yen-Chi CHEN, Ying-Chih LIAO,
Prec. Printing Tech. Lab., D. Chem. Eng., National Taiwan University, Taipei <101245-1>

PG211 “Fabrication and Characterization of Quantum Dot Sensitized Solar Cells Using Copper Doped CdS Photoanodes,”
Mohammed Panthakkal Abdul Muthalif, Jino C. JOHN, Archana Puthanveedu, Hyein Been,
Pusan National University, Busan <101315-1>

PG212 “Blue electroluminescence from an ionic small molecule,”
Shanmugasundaram Kanagaraj, Jiyun HU, Sangyoon CHA, Jihun CHOI,
Pusan National University, Busan <101316-1>

PG213 “Fabrication of a Flexible Capacitive Pressure Sensor for Implantable Medical Applications,”
Hsiao Chi CHEN, Jen Huang HUANG, Ho Hsiu CHOU, Chih Li CHANG,
National Tsing Hua University, Hsinchu <101408-1>

PG214 “Highly Thermostable, Transparent and Solution-processable Polyimides as Core Material of Future Displays,”
Ki-Ho NAM, Juheon LEE, Sangrae LEE, Haksoo HAN,
Yonsei University, Seoul <101437-1>

PG215 “Synthesis and characterization of highly stretchable and transparent elastomer and applications,”
Juheon LEE, Kiho NAM, Sangrae LEE, Haksoo HAN,
Yonsei University, Seoul <101454-1>

PG216 “High-speed video measurements of hydrogen and oxygen microbubble formation near the electrode in alkaline water electrolysis,”
Yudai KOJIMA, Ryuta MISUMI, Meguru KAMINOYAMA, Shigenori MITSUSHIMA,
Yokohama National University, Yokohama <101513-1>

PG217 “Deposition of Ph-BTBT-10 Thin Films by Rapid Expansion of Supercritical Solutions (RESS) Using CO₂,”
Yui SAKAMOTO¹, Yusuke SHIBA¹, Kazutoshi SHIMAMURA², Hirohisa UCHIDA³,
¹ G. S. Natur. Sci. Tech., Division of Natural System, Kanazawa University, Kanazawa,
² Eng. Tech. D., Kanazawa University, Kanazawa,
³ F. Frontier Eng., I. Sci. Eng., Kanazawa University, Kanazawa <101521-1>