Technical Program — Special Session S7

Session Program

The technical program was fixed on Monday, September 9. Further changes are listed on the Program top page, if any.

The first letter of the presentation ID represents the hall. The second letter represents the day of the presentation (1: Mon., 2: Tue., 3: Wed., 4: Thu., 5: Fri.). The number in < > at the end of each presentation is the abstract ID.

Special Session S7. Carbon capture, utilization, and storage (CCUS): Process development and fundamental properties

As the global warming becomes the serious problem in the society, the technology is needed to develop the novel processes of carbon dioxide capture for utilization (CCU) as well as storage (CCS). This symposium will provide the opportunity for you to discuss topics ranging from the fundamental thermodynamic data and models to the development of the novel separation processes for CCUS technology. The fundamental properties, the separation processes, and the environment, these three divisions of SCEJ organize this symposium as the kick off of the large scale collaboration.

Day 3, Wednesday, September 25

15:30–17:00 Hall G

Oral session

Chair: Tomoya TSUJI, Universiti Teknologi Malaysia (UTM)

G321 “[Keynote] Challenges and opportunities for carbon capture and utilisation in high CO₂ content natural gas environment,”
Azmi Mohd SHARIFF,
CO₂ Res. Cen., I. Contaminant Manag., Chem. Eng. D., Universiti Technology PETRONAS, Tronoh <507002-1>

Chairs: Tomoya TSUJI, Universiti Teknologi Malaysia (UTM); Hiroshi MACHIDA, Nagoya University

G323 “Carbon Dioxide Capture by Sodium Hydroxide-Methanol Solution in a Rotating Packed Bed,”
Chia-Ying CHIANG¹, Yuk-Man TANG², Hwai-Shen LIU²,
¹ D. Chem. Eng., National Taiwan University of Science and Technology, Taipei
² D. Chem. Eng., National Taiwan University, Taipei <100050-1>

G324 “CO₂ separation membrane modules for high purity CO₂ recovery,”
Ikuo TANIGUCHI, Kae KINUGASA, Mariko TOYODA,
Kyushu University, Fukuoka <100606-1>

Chair: Hiroshi MACHIDA, Nagoya University

G325 “[Keynote] Manufacturing advanced structured contactors with integrated heat management capabilities,”
Ryan LIVELY,
Sch. Chem. Biomolec. Eng., Georgia Institute of Technology, Atlanta <507003-1>

Day 3, Wednesday, September 25

17:00–19:00 Hall P

Poster session

PG301 “Advance stripper configuration for energy-saving design using standard monoethanolamine absorbent for post-combustion carbon capture,”
Jialin LIU¹, Ding-Sou CHEN²,
¹ Tunghai University, Taichung
² China Steel Corporation, Kaohsiung <100014-1>

PG302 “Thermodynamic model for predicting energy for amine absorbents,”
Takayuki KUSHIDA, Sakurako WADA, Yukio FURUKAWA,
Waseda University, Tokyo <100062-1>

PG303 “CO₂ solubilities and phase behaviors in phase separation solvents at high pressure,”
Andrzej-Alexander LITWINOWICZ¹, Masaki WATANABE¹, Takashi MAKINO¹, Yuki KOHNO¹, Hiroshi MACHIDA², Koyo NORINAGA², Mitsuhiro KANAKUBO¹,
¹ Res. I. Chem. Proc. Tech., National Institute of Advanced Industrial Science and Technology (AIST), Sendai
² G. S. Eng., Nagoya University, Furocho, Chikusaku, Nagoya <100284-1>

PG304 “Energy saving CO₂ capture process using circulating fluidized bed,”
Yasuki KANSHA, Masanori ISHIZUKA,
The University of Tokyo, Tokyo <100427-2>

PG305 “Simultaneous organic matter synthesis and absorbent regeneration by direct hydrothermal treatment of alkali bicarbonate as a CO₂ absorbent,”
Ryo MIZUNO¹, Iori SHIMADA², Mitsumasa OSADA², Hiroshi FUKUNAGA², Nobuhide TAKAHASHI²,
¹ G. S. Sci. Tech., Shinshu University, Ueda
² F. Textile Sci. Tech., Shinshu University, Ueda <100948-1>

PG306 “CO₂ absorption characteristics of aqueous blends of potassium serinate and piperazine,”
Sujeong SEO^1,2, Hojun SONG¹, Johong KANG¹, Yongchul CHUNG²,
¹ Korea Institute of Industrial Technology Company, UlSan
² Pusan National University, Busan <101149-1>

PG307 “Degradation test on phase separation type absorbent using amine and ether for energy-saving CO₂ capture,”
Norihide MAEDA¹, Akira KISHIMOTO¹, Ken NAKANISHI¹, Takuo SHIGEHISA¹, Hiroshi MACHIDA², Tsuyoshi YAMAGUCHI², Koyo NORINAGA²,
¹ Kobe Steel, Ltd., Kobe
² Nagoya University, Nagoya <101167-1>

PG308 “Lab. plant result of phase separation CO₂ capture with H₂ gas stripping,”
Hitoshi NISHIO¹, Daiji MUROYA¹, Takehiro ESAKI², Hiroshi MACHIDA¹, Koyo NORINAGA¹,
¹ Nagoya University, Nagoya
² Fukuoka University, Fukuoka <101279-1>

PG309 “CO₂ solubility measurement in phase separation solvent using in-situ FTIR,”
Miho SATO, Khuyen TRAN, Hiroshi MACHIDA, Koyo NORINAGA,
Nagoya University, Nagoya <101291-1>

PG310 “Performance evaluation of phase separation process using high-concentration AMP promoted by MAPA for CO₂ capture,”
Akihisa MATSUI¹, Naoya OGIYAMA¹, Takumi ENDO², Jun ARAKAWA², Takao NAKAGAKI¹,
¹ Waseda University, Tokyo
² IHI Corporation, Tokyo <100896-1>

PG311 (canceled) <101466-1>

PG312 “Reaction kinetics of carbon dioxide in aqueous blends of N-methyldiethanolamine and potassium salts of glycine using the stopped flow technique,”
Nafis Mahmud, Abdelbaki BENAMOR, Mustafa Nasser, Muftah El-Naas,
¹ Sch. Chem. Eng., the University of New South Wales, Sydney
² Particle Catalysis Res. Gr., the University of New South Wales, Sydney <100985-1>

PG313 (canceled) <100011-1>

Day 4, Thursday, September 26

10:30–12:00 Hall G

Oral session

Chair: Nobuhide TAKAHASHI, Shinshu University

G401 “[Keynote] Chinese CCUS overview and CO₂ mineralization research for concrete curing,”
Tao WANG,
State Key Lab. Clean Ene. Util., Zhejiang University <507004-1>

Chairs: Nobuhide TAKAHASHI, Shinshu University; Ikuo TANIGUCHI, Kyushu University

G403 “Application of DDR-type zeolite membrane for CO₂-EOR,”
Shogo TERATANI¹, Mizuki YOSHIDA¹, Tomoya NONOUE¹, Junya OKAZAKI¹, Hiroaki HASEGAWA¹, Katsuya SHIMIZU², Kenji YAJIMA², Makiko NIINO²,
¹ JGC Corporation, Yokohama
² NGK Insulators, Ltd., Nagoya <100128-1>

G404 “Performance evaluation of DDR type zeolite membrane under high pressure condition,”
Mizuki YOSHIDA¹, Shogo TERATANI¹, Tomoya NONOUE¹, Junya OKAZAKI¹, Hiroaki HASEGAWA¹, Katsuya SHIMIZU², Kenji YAJIMA², Makiko NIINO²,
¹ JGC Corporation, Yokohama
² NGK Insulators, Ltd., Nagoya <100941-1>

G405 “Alkali nitrate modified flash calcined MgO for the in-situ CO₂ capture in the water-gas shift reaction,”
Dan Allen Zamora¹, Jacinto Lamud¹, Qian Shun Yong¹, Thomas HANH¹, Hongzhe LI¹, Nicholas BEDFORD¹, Jason SCOTT^1,2, May LIM¹,
¹ Sch. Chem. Eng., the University of New South Wales, Sydney
² Particle Catalysis Res. Gr., the University of New South Wales, Sydney <100892-1>

G406 “Auto-methanation of carbon dioxide with oxidation: a novel route for CO₂ transformation over supported metal catalyst,”
Choji FUKUHARA¹, Sakhon Ratchahat², Masao SUDOH³, Ryo WATANABE¹,
¹ G. S. Eng., Shizuoka University
² F. Eng., Mahidol University
³ Amano Institute of Technology <100380-1>

13:30–15:00 Hall G

Oral session

Chair: Hidetaka YAMADA, RITE

G413 “[Keynote] IHI PCC technologies demonstration at a coal-fired power plant,”
Takumi ENDO,
IHI Corporation, Tokyo <507005-1>

Chairs: Hidetaka YAMADA, RITE; Hiroshi MACHIDA, Nagoya University

G415 “Determination of the properties of mixed dump serpentinites from Nickel mine site through leaching process for indirect CO₂ mineral carbonation,”
Bernard Jomari B. Razote¹, Ramon Christian P. EUSEBIO², Mark Kenneth MARANAN², Richard D. ALORRO³, Arnel B. BELTRAN¹, Aileen H. ORBECIDO¹,
¹ Chem. Eng. D., Gokongwei Col. Eng., De La Salle University, Manila
² Chem. Eng. D., Col. Eng. Agro-Ind. Tech., University of the Philippines-Los Baños, Los Baños
³ Western Australian Sch. Mines: Minerals, Ene. Chem. Eng., F. Sci. Eng., Curtin University, Kargoorlie <101216-1>

G416 “Chemical kinetics of oxygen carriers for chemical looping combustion technology producing CO₂ rich flue gas from coal fired power plant,”
Atul SHARMA, Martin KELLER, Akimitsu MATSUMURA,
National Institute of Advanced Industrial Science and Technology, Res. I. Ene. Frontier, Non-conventional Carbon Resour. Gr., Tsukuba <101136-1>

G417 “Influence of amine-based absorbents on CO₂ desorption in membrane flash process using alumina porous hollow fiber membranes,”
Nobuhide TAKAHASHI,
F. Textile Sci. Tech., Shinshu University <100855-1>

G418 “Effect of wash-coated metal oxides over synthesized carbon nanofibers coated monolith substrates,”
Mohamad Rasool Malekbala, Suraya Abdul Rashid, Luqman Chuah Abdullah, Thomas Shean Yaw Choong, Soroush Soltani,
Universiti Putra Malaysia, Selangor <100933-1>

15:30–16:30 Hall G

Oral session

Chairs: Shigeo OBA, Applied Thermodynamics and Physical Properties, Co., Ltd. (AT-PP); Shogo TERATANI, JGC Corporation

G421 “Mineral carbonation of steel-making waste: A green approach,”
Mohamed H. Ibrahim¹, Muftah H. El-Naas¹, Abdelbaki BENAMOR¹, Saad Al-Sobhi²,
¹ Gas Processing Centre, Col. Eng., Qatar University, Doha
² D. Chem. Eng., Col. Eng., Qatar University, Doha <100586-1>

G422 “Energy-saving CO₂ capture process by integrating separation and conversion process,”
Hiroshi MACHIDA¹, Takehiro ESAKI², Tsuyoshi YAMAGUCHI¹, Koyo NORINAGA¹,
¹ Nagoya University, Nagoya
² Fukuoka University, Fukuoka <100660-1>

Chair: Shigeo OBA, Applied Thermodynamics and Physical Properties, Co., Ltd. (AT-PP)

G423 “[Keynote] CCS demonstration projects in Japan and Tomakomai CCS Demonstration Project,”
Yoshihiro SAWADA, Jiro TANAKA, Chiyoko SUZUKI,
Japan CCS Co., Ltd., Tokyo <507001-1>