The technical program was fixed on Monday, September 9. Further changes are listed on the Program top page, if any.
The first letter of the presentation ID represents the hall. The second letter represents the day of the presentation (1: Mon., 2: Tue., 3: Wed., 4: Thu., 5: Fri.). The number in < > at the end of each presentation is the abstract ID.
The symposium is focusing on state-of-the-art topics in the fields of fuel cells, battery, solar cell, energy carriers and related electrochemical energy technologies with comprehensive approach and perspectives from materials, reactions, devices, and systems to provide a forum for international exchange of views for future energy systems.
Chairs: Akira NISHIMURA, Mie University; Takao NAKAGAKI, Waseda Univerisity
M201 “The effect of zeolite filling into the plasma membrane reactor on hydrogen separation performance,”
<100538-1>
M202 “Reversible dehydrogenation of formate on N-doped graphene-supported Pd nanoparticles for renewable hydrogen energy,”
<101290-1>
M203 “Plasma flow reactor with a flow channel for hydrogen production from ammonia,”
<100059-1>
M204 “Hydrogen production by packed bed plasma reactor with hydrogen separator,”
<100796-1>
M205 “Electrochemical device with reaction, separation, compression processes for pressurized hydrogen from 2-propanol,”
<100688-1>
M206 “Development of plate-type plasma membrane reactor,”
<100801-1>
Chairs: Nobuyoshi NAKAGAWA, Gunma University; Manabu IHARA, Tokyo Institute of Technology
M213 “First-principles investigation of phase stability of magnesium alanate (Mg(AlH4)2) for hydrogen storage,”
<101287-1>
M214 “Highly durable membrane electrode assembly using carbon-free connected platinum–iron catalyst for direct formate solid alkaline fuel cells,”
<100997-1>
M215 “CO2 Hydrogenation to methanol over highly loaded Cu nanoparticles on ZrO2 prepared by flame spray pyrolysis,”
<100539-1>
M216 “Enhancing noble metal alkaline formate oxidation (FOR) kinetics: Engineering transition metal and post-transition metal based nanoalloys,”
<100322-1>
Chair: Ryuji KIKUCHI, the University of Tokyo
M217 “[Keynote] Structured Cu-based/γ-Al2O3/Al catalysts for steam reforming of dimethyl ether and applied in a microreactor,”
<508002-1>
Chairs: Shinji KAMBARA, Gifu University; Qi ZHANG, East China University of Science and Technology
M221 “Ion-beam irradiation to the CECNF support of the anode catalyst for DMFC,”
<100411-1>
M222 “Design strategy of palladium-based catalysts for formate oxidation reaction in alkaline conditions based on mechanistic studies,”
<100680-1>
M223 “Distribution of water permeation in polymer electrolyte fuel cell system with hydrogen recycling,”
<100319-1>
M224 “Stability, strain, and electronic structure of Pt3M (M = Co, Ni, and Cu) nanoparticles,”
<100498-1>
M225 “Experimental investigation on impact of thicknesses of PEM and GDL on temperature distribution in single PEFC generated at high temperature,”
<100168-1>
PM201 “Carbon gels heated at various temperatures for Li-air battery cathodes,”
<100293-1>
PM202 (canceled) <101483-1>
PM203 “Development of a high-capacity cathode for Li-air batteries from carbon nanofibers,”
<100294-1>
PM204 “Silicon nanoparticle composited with N-dope carbon as anode in Li-ion storage,”
<100430-1>
PM205 “Suitable Carbon Black Conductor in High-Voltage cathode for Lithium ion Secondary Batteries,”
<101423-1>
PM206 “Preparation of NCM523/PI composite cathode materials,”
<101229-1>
PM207 “Simulation for all-solid state batteries with multi-element network model,”
<101034-2>
PM208 (canceled) <101444-1>
PM209 “Preparation of hydroxide for NCM ternary cathode material precursor by precipitation,”
<101218-1>
PM210 “Activation of carbon electrode for vanadium redox flow battery by electron beam-irradiation,”
<100926-1>
PM211 “Mn-Fe based Bimetallic Metal-Organic Framework as Electrode Materials for Supercapacitors,”
<100456-1>
PM212 “Synthesis of reduced graphene oxide composites using microwave treatment as high-performance electrodes for supercapacitor devices,”
<100540-2>
PM213 “Electrosynthesis of ammonia with tungsten-Iron catalyst using proton-conducting solid oxide fuel cell,”
<100219-1>
PM214 “Performance investigation of SOFC single cell for renewable energy interconnection,”
<100239-1>
PM215 “Carbon supported metal phosphide anodes for intermediate temperature fuel cells,”
<101151-1>
PM216 “Dual sulfonated poly(arylene ether ketone) membrane grafted with 15-crown-5-ether for enhanced proton conductivity and anti-oxidation stability,”
<100122-1>
PM217 “Mass balance model for Solid-state Alkaline Fuel Cells considering water transport in polymer electrolyte membrane.,”
<100386-1>
PM218 “Effect of RGO particle size on the catalytic activity of PtRu/RGO used for direct methanol fuel cell,”
<100557-1>
PM219 “Single atom cobalt-doped graphene and its ORR activity,”
<100770-1>
PM220 “Effect of electrode microstructure using metal-free carbon catalyst as cathode catalyst for polymer electrolyte fuel cell,”
<101031-1>
PM221 “Preparation of a graphene oxide membrane for a fuel cell application,”
<100733-1>
PM222 “Pore-filling Membrane with Hydrocarbon Ionomer for Polymer Electrolyte Water Electrolysis,”
<100676-1>
PM223 “Electrochemical fabrication of alloy catalysts for fuel cell and water electrolyzer,”
<100881-1>
PM224 “Ni-Fe Based Bi-metallic Metal-Organic Framework in-situ Grown on Nickel Foam as High Efficiency Overall Water Splitting Catalysts,”
<100231-1>
PM225 “Design of Stable Composite Catalyst Composed of Perovskite-Type Oxide and Metal Oxide Support for the Oxygen Evolution Reaction in Alkaline Solutions,”
<101076-1>
PM226 “Ni-Fe-Mo based Nanorod Arrays as Bifunctional Electrocatalyst for Overall Water Splitting,”
<100441-1>
PM227 “Ab-initio studies on reversible dehydrogenation of biphenyl and diphenylmethane depending on functional groups,”
<101340-1>
PM228 “Investigation of anode catalyst on liquid ammonia electrolysis for hydrogen production,”
<100533-1>
PM229 “Experimental Manner for Ammonia Electrochemical Synthesis at Intermediate Temperatures,”
<100539-2>
PM230 “Electrolysis of ammonia in aqueous solution by platinum nanoparticle supported carbon nanotube film electrode,”
<101286-1>
PM231 “Investigation of bis-BN cyclohexane-based LOHC systems for improving renewable hydrogen energy storage using density functional theory ,”
<101341-1>
PM232 “Development of electrochemical pump for hydrogen transport and storage from methylcyclohexane,”
<100837-1>
PM233 “First principles study on the reversible dehydrogenation mechanisms of BN-biphenyl and BN-diphenylmethane for renewable hydrogen energy,”
<101460-1>
PM234 “Kinetic study of H2 production and CO2 activation by methane in chemical looping methane cracking system with Iron-doped Barium Zirconate,”
<100891-1>
PM235 “Fabrication of highly dispersed Co/N catalyst in zeolite templated carbon using Co/2-methylimidazole anchored to Y zeolite and its application in oxygen reaction reduction,”
<100540-1>
PM236 “Hydrogen storage properties of MgH2-carbon nanotube composite,”
<100547-1>
Chairs: Teppei OGURA, Kwansei Gakuin University; Hiroki MATSUO, the University of Tokyo
M301 “Development of novel preparation method of core-shell catalyst layer for PEFC using Ru nanosheet as core material,”
<101030-1>
M302 “Visualization of liquid water in micro porous layer formed by water vaper diffusion into gas diffusion layer for PEFC using X-ray computed tomography,”
<101018-1>
M303 “Determination of Mass Transfer Resistances in PEFC by a Dimensionless Analysis,”
<100156-1>
M304 “Conceptual Design for Significant Improvement in Efficiency of Long-Term Energy Storage with Reversible Solid Oxide Cells(R-SOCs),”
<101133-1>
M305 “Development of low Ni-containing SOFC anodes based on percolation theory,”
<101015-1>
M306 “Kinetics model to describe reversible operation of solid oxide fuel cell / electrolysis with competitive adsorption reaction on anode triple phase boundary,”
<100345-1>
Chairs: Hirokazu ISHITOBI, Gunma University; Takanori TAMAKI, Tokyo Institute of Technology/Kanagawa Institute of Industrial Science and Technology
M313 “Triple phase boundary reactions in solid oxide fuel cell anode: combined atomic-resolution microscopy and reaction dynamics simulation,”
<101309-1>
M314 “Microfabrication of anode functional layer in SOFC by using 3D printer,”
<101008-1>
M315 “Effect of thin bilayer electrolytes on performance of anode-supported proton-conducting solid oxide fuel cells,”
<100461-1>
M316 “Proposal of carbon-air secondary battery system and evaluation of its potential as a large-capacity energy storage,”
<100549-1>
Chair: Takanori TAMAKI, Tokyo Institute of Technology/Kanagawa Institute of Industrial Science and Technology
M317 “[Keynote] Electrical energy storage in functionalized renewable materials,”
<508003-1>
Chairs: Hiroshi FUKUNAGA, Shinshu University; Rajan JOSE, Universiti Malaysia Pahang
M321 “Selective Electrochemical Carbon Dioxide Conversion to Hydrocarbons on Ni/Cu Binary Electrodes,”
<100479-1>
M322 “Effect of Pd doping on Sn surface for the electrochemical reduction of CO2/HCO3– to HCO2–,”
<100437-1>
M323 “First-principles study of catalytic activity modifications with electric field,”
<100304-1>
M324 “Structural analysis of furfural resin -based active carbon to control electric double layer capacitor,”
<101314-1>
M325 “Efficient production of TiO2 / porous carbon nanocomposites through the vacuum liquid pulse chemical vapor deposition technique,”
<100287-1>
M326 “Study of Si/TiO2/Perovskite interfaces for perovskite/Si tandem solar cell,”
<100778-1>
Chairs: Gen INOUE, Kyushu University; Shohei TADA, the University of Tokyo
M401 “Atomically dispersed Ni–N x Species anchored porous carbon with embedded Ni nanoparticles for efficient alkaline hydrogen evolution,”
<101121-1>
M402 “Anion exchange membrane with thermally convertible polymer system for alkaline water electrolysis application,”
<100201-1>
M403 “Carbon-free connected Ir nanoparticle catalysts for oxygen evolution reaction in polymer electrolyte water electrolysis,”
<100346-1>
M404 “Cu nanowire@MnNiP Electrocatalysts for Water Splitting in Neutral Solution,”
<101271-1>
M405 “Effect of cell temperature on relative humidity in a polymer electrolyte fuel cell,”
<101344-1>
M406 (canceled) <100859-1>
Chairs: Kei HASEGAWA, Tokyo Institute of Technology; Guoqing GUAN, Hirosaki University
M413 “Possible energy system with H2 storage contributing to grid power stability under large-scale implementation of solar cells,”
<100340-1>
M414 “Possible cost reduction with high volume 2D manufacturing concept for fuel cells,”
<205801-1>
M415 “Techno-economic analysis of a distributed hydrogen energy storage system considering horizontal and vertical installation of solar cells,”
<100325-1>
M416 “Customized water electrolysis cell towards the efficient production of hydrogen,”
<100516-1>
Chair: Takuya HASEGAWA, Nissan Motor Corporation
M417 “[Keynote] Review of new energy vehicle development in China and construction of Shanghai AI NEV Innovative Platform with battery materials analysis function,”
<508004-1>
Chairs: Junichiro OTOMO, the University of Tokyo; Michihisa KOYAMA, the National Institute for Materials Science / Shinshu University
M421 (canceled) <101243-1>
M422 “Evaluation of porous structure on dynamic behavior in Lithium-ion batteries by numerical simulation,”
<101034-1>
M423 “Conducting and flexible polymer coating on silicon nanoparticles as anode for lithium-ion batteries,”
<101239-1>
M424 “Effect of electrolyte additive on the performance of Lithium metal batteries,”
<101219-1>
Chair: Michihisa KOYAMA, the National Institute for Materials Science / Shinshu University
M425 “[Keynote] Synthesis and characterization of bifunctional air electrodes for rechargeable zinc-air batteries,”
<508001-1>