Hall I | |||||
---|---|---|---|---|---|
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
I(¸áÁ°) | |||||
(10:00–11:00) (Chair: Horie Takafumi, Mino Yasushi) | |||||
I01 | Numerical analysis of specific behaviour of interfacial phenomena in nanoscale | Molecular dynamics viscosity gas-liquid interface | 2-a | 121 | |
I02 | Numerical Analysis of Effect of Particle Size Distribution in the Shaking Tank of Suspension Culture of iPS Cel | particle size OpenFOAM computational fluid dynamics | 2-b | 52 | |
I03 | Effect of particle properties on rheological characteristics of capillary suspension | rheology particle diameter capillary suspension | 2-f | 101 | |
I04 | Direct numerical simulation of structure formation of solid-liquid-liquid three-phase particle dispersion system | Capillary suspension Rheological properties Direct numerical simulation | 2-e | 60 | |
I05 | Reuse of woody biomass combustion ash to the raw material of plywood | Woody biomass ash plywood glue | 2-f | 119 | |
(11:00–12:00) (Chair: Ishigami Toru, Masuda Koji) | |||||
I06 | Effect of agitation conditions on micro-silica capsule synthesis | micro silica capsule mixing emulsification | 2-b | 132 | |
I07 | Effect of shear rate on size distribution of polymer particles | particle aggregation shear rate particle size distribution | 2-b | 129 | |
I08 | Unsteady mixing characteristics of a stirred vessel with induction heated impeller blades | Heat transfer Mixing Heat impeller blades | 2-b | 145 | |
I09 | Synthesis and evaluation of SiO2/carbon composite particles by microwave heating method | silica carbon composite particles | 2-f | 51 | |
I10 | Particle-solid wall adhesion evaluation based on re-suspension phenomena by air jet - Investigation of influence of wall material on particle adhesion | Particle adhesion Air jet Surface roughness | 2-f | 95 | |
Lunch break | |||||
I(¸á¸å) | |||||
(13:00–14:12) (Chair: Itoh Kazuhiro, Fukasawa Tomonori) | |||||
I16 | Evaluation of particle generation by the spray drying | Spray drying Droplet Particle generation | 2-f | 94 | |
I17 | Design of granules by continuous spray-drying | Spray-drying Tabletting Granulation | 2-f | 40 | |
I18 | Steady-state evaluation scheme of anisotropic thermal conductivity | Steady state Anisotropy Thermal conductivity | 2-a | 155 | |
I19 | Simultaneous Measurements of Time and Current for Electrorheological Suspension Passing between Prallel Plate Electrodes | Electrorheological suspension Current density measurement Non-destructive measurement | 2-g | 153 | |
I20 | Effect of structural non-uniformity on gas flow through packed beds of spheres | Structural non-uniformity Packed bed Gas penetration method | 2-f | 180 | |
I21 | Influence of agglomeration characteristics on compression speed dependence of dry-pressed powder strength | Uniaxial compression Compressed powder strength Compression speed | 2-f | 138 | |
(14:12–15:24) (Chair: Gotoh Kuniaki, Mizuta Kei) | |||||
I22 | Evaluation of Performance of Aeration Pipe for High-Speed Air-Injection Model | Aerator two-phase flow efficiency | 2-e | 163 | |
I23 | Separation performance of the cyclone with high velocity additional flow for high clust load aerosol | cyclone separator high clust load powder deposition | 2-f | 107 | |
I24 | Behavior of powder layer separated into two layer compressed by the sine vibrating piston | Universal gripper Powder engineering jamming transition | 2-f | 173 | |
I25 | Agglomeration of cohesive fine powder in a vibrating fluidized bed near minimum fluidization velocity | agglomeration vibrating fluidized bed minimum fluidization velocity | 2-f | 125 | |
I26 | High share granulation process of soft metal-organic framework particles | Metal-organic framework Zeolitic imidazolate framework-8 High share granulation | 2-f | 9 | |
I27 | Electrophoretic classification based on differences in electrophoretic mobility caused by change in applied electric field | classification electrohoresis applied electric field | 2-f | 120 | |
Hall J | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
J(¸áÁ°) | |||||
(10:00–11:00) (Chair: Yasuda Masahiro, Masakoto Kanezashi) | |||||
J01 | Preparation and characterization of gas separation membranes used Allylhydridopolycarbosilane(AHPCS) | Silicon carbide Gas separation AHPCS | 4-a | 109 | |
J02 | Evaluation of subnano pore size distribution of microporous membranes by gas diffusion method | Gas separation membrane Pore size distribution NKP method | 4-a | 89 | |
J03 | Network tuning and gas permeation property of fluorine-silica membrane derived from Triethoxyfluorosilane(TEFS) | Sol-gel Fluorine-silica gas permeation | 4-a | 69 | |
J04 | Effect of operating conditions on the dehydration performance of MOR-zeolite membranes | zeolite membrane dehydration pervaporation | 4-a | 165 | |
J05 | Application of hydrophilic zeolite membrane for concentrating fermentation products | zeolite membrane fermentation pervaporation | 4-a | 166 | |
(11:00–12:00) (Chair: Yoshioka Tomohisa, Sano Noriaki) | |||||
J06 | eparation of organic vapors by ionic liquid-functionalized silica membrane | ionic liquid membrane separation organic vapor separation | 4-a | 179 | |
J07 | Alkaline absorption of carbondioxde in the presence of polymer particle having cations | Carbondioxde Alkaline absorption Green house effect | 4-d | 75 | |
J08 | Preparation of ion gel for CO2 separation membrane | Ionic liquid Ion gel CO2 separation | 4-a | 110 | |
J09 | Gas permeation properties and pore size controllability of BTESP (bis(triethoxysilyl)propane) membrane | sol-gel gas separation organosilica membrane | 4-a | 66 | |
J10 | Influence of preparation conditions on the high-temperature CO2 capture performance of Ba2TiO4 | CO2 capture adsorbent Ba2TiO4 | 4-d | 172 | |
Lunch break | |||||
J(¸á¸å) | |||||
(13:00–14:12) (Chair: Hiroki Nagasawa, Kumakiri Izumi) | |||||
J16 | Particle Separation by Dielectrophoresis Using Nano-Structured Electrode | dielectrophoresis nano particle particle separation | 4-b | 146 | |
J17 | Behavior of Nitrogen in Carrier Added Activated Sludge Process | Nitrification Activated sludge process Carrier | 4-b | 91 | |
J18 | Treatment of nickel in waste water using humus | nickel adsorption humus | 4-b | 90 | |
J19 | Hypochlorite degradation of tirtiary amide RO membrane | Reverse osmosis membrane chlorine resistant tertiary amide | 4-a | 175 | |
J20 | Effect of aeration on the filtration characteristics of hollow fiber microfiltration membranes | filtration characteristics hollow fiber aeration | 4-b | 92 | |
J21 | Development of thermo-responsive polymers having a glycerol backbone and application to forward osmosis process | forward osmosis draw solute thermo-responsive polymer | 4-a | 76 | |
(14:12–15:24) (Chair: Inada Asuka, Kawasaki Kenji) | |||||
J22 | Fabrication of nano-filtration membrane via layer-by-layer method and effect of polymer structures on water permeability | Nano-filtration membrane Layer-by-Layer assembly electrostatic interaction | 4-a | 142 | |
J23 | Mass transfer behavior in thermoresponsive polymer membrane (Nat. Col. Tech., Nara College) *Kashiwazaki Hiromu, | thermoresponsive membrane polymer | 4-a | 158 | |
J24 | Reverse osmosis and nanofiltration in organic solution using microporous ceramic membranes | ceramic membrane reverse osmosis organic solution | 4-a | 80 | |
J25 | One-step fabrication of polyamide 6 hollow fiber membranes for organic solvent filtration | TIPS Hollow fiber membrane Organic solvent filtration | 4-a | 106 | |
J26 | Fabrication of Stacked Metal Oxide Nanosheet / Graphene Oxide Membranes and Effects of composite ratio on the Membrane Performance | Separation membrane Nanosheet Graphene oxide | 4-a | 88 | |
J27 | Preparation of silica membrane by atmospheric pressure plasma interfacial polymerization | atmospheric pressure plasma interfacial polymerization silica membrane low-temperature sintering | 4-a | 84 | |
Hall K | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
K(¸áÁ°) | |||||
(10:00–11:00) (Chair: Shiomori Koichiro, Suzuki Tetsuo) | |||||
K01 | Effect of interfacial perturbation on mass-transfer in liquid-liquid slug flow | mass-transfer liquid-liquid slug flow perturbation | 4-f | 148 | |
K02 | Effect of interfacial perturbation on mass-transfer in liquid-liquid slug flow | Supersaturation Apolipoprotein A-I amyloid fibril formation | 4-g | 151 | |
K03 | Preparation of mesoporous silico-alumino-phosphate zeolite and the adsorption desorption behavior of water | Mesoporous silico-alumino-phosphate zeolite adsorption desorption behavior water | 4-e | 17 | |
K04 | Extraction properties and extraction rate of metal ions with porous particles with interconnected spherical pores impregnating LIX84-I | porpus microcapsules metal extraction extraction rate | 4-f | 177 | |
K05 | Preparation and extraction properties of Cu(II) of PVA/Arginate-crosslinking-gel microcapsules containing LIX84-I | Microcapsules Cu(II) extraction Extraction equilibrium | 4-f | 170 | |
(11:00–12:00) (Chair: Yamada Naofumi, Nomura T.) | |||||
K06 | Microbial adsorption of dysprosium and neodymium in acidic solutions | biosorption dysprosium neodymium | 4-e | 102 | |
K07 | Microbial adsorption of tungstate in acidic solutions | biosorption tungsten rare metals | 4-e | 103 | |
K08 | Cytotoxicity of peptide lipid | cancer peptide lipid surfactant | 7-i | 167 | |
K09 | A molecular dynamics study of hydration of agarooligosaccharides | molecular dynamics hydration agarooligosaccharide | 7-h | 82 | |
K10 | Functionality change by the interaction of gimunema and green tea | taste modification plant gimunema anti-oxidative activity | 7-h | 11 | |
Lunch break | |||||
K(¸á¸å) | |||||
(13:00–14:12) (Chair: Noboru Kishimoto, Katoh Masahiro) | |||||
K16 | Effect of lithocholic acid on model plasma membrane | Lithocholic acid Cholesterol fluorescence | 7-i | 59 | |
K17 | Comparison of sterilization effects of commercial hand soaps using yogurt starter | sterilization effect yogurt starter hand soap | 7-i | 135 | |
K18 | Separation and recovery of Sn and Ni from plating sludge using ion exchange fiber | metal separation ion exchange plating sludge | 4-e | 104 | |
K19 | Development of new gas absorption equipment having plate type of glass fiber filter and it's NOx removal efficiency | Nitrogen oxide Gas absorption Glass fiber filter | 4-e | 152 | |
K20 | Measuring the degree of contamination using images of digital camera | digital camera RGB washing cotton | 4-e | 150 | |
K21 | Research and Development of Trimethylamine Remover Using Activated Carbon Fabricated from Waste Seeds of Pickled Ume (NIT or Nippon Inst. Tech. or NITechWakayama) *Tatehata K., | Activated carbon Trimethylamine Adsorption | 4-e | 159 | |
(14:12–15:24) (Chair: Kinugasa Takumi, Kurahashi Kensuke) | |||||
K22 | Development of Ethylene Remover Using Activated Carbon Fabricated from Waste Seeds of Pickled Ume | Activated carbon Ethylene remover | 4-e | 161 | |
K23 | Development of adsorbent using Konjac glucomannan and activated carbon fabricated from agricultural waste in Wakayama pref. (NIT or Nippon Inst. Tech. or NITechWakayama) *Morikawa C., | Konjac glucomannan activated carbon adsorption | 4-e | 160 | |
K24 | Solid-phase extraction of rare earth elements by solvent impregnated resins adding surfactants | Solid phase extraction Solvent impregnated resin rare earth element | 4-f | 128 | |
K25 | Examination of extraction condition of Congo red using Hexadecyltrimethylammonium chloride | Extraction Surfactant Dye | 4-f | 77 | |
K26 | Interfacial mass transfer coefficients of Methylene blue extraction using AOT reverse micelles | Extraction Surfactant Reverse micelles | 4-f | 78 | |
K27 | Recovery of denatured proteins by precipitation and recovery method of proteins using AOT | precipitation protein surfactant | 4-i | 141 | |
Hall L | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
L(¸áÁ°) | |||||
(10:00–11:00) (Chair: Sugiyama S., Shimada M.) | |||||
L01 | Influence of salts on the performance of a catalytic membrane contactor | catalytic membrane oxidation water treatment | 5-a | 171 | |
L02 | Development of zeolite catalysts for selective production of xylene from acetone | Zeolite catalyst Acetone conversion Xylene synthesis | 5-a | 65 | |
L03 | Development of a PEFC cell model for determining distribution of humidity along the flow channel | PEFC water transport modeling | 5-a | 62 | |
L04 | Fabrication of perovskite thin films by CVD | CVD Perovskite thin films | 5-h | 74 | |
L05 | Partial Oxidation of Propylene over Bi-Mo Complex Oxide Catalysts | Partial Oxidation Propylene Bi-Mo Oxides | 5-a | 5 | |
(11:00–12:00) (Chair: Kubo M., Saito Takeyasu) | |||||
L06 | Epoxidation of Propylene over ZSM-5 and Related Catalysts | Epoxidation Propylene ZSM-5 | 5-a | 6 | |
L07 | Behavior of Ammonia Formation during Reductive Decomposition of Nitrite over Pd/C | Ammonia Formation Reductive Decomposition Nitrite | 5-a | 7 | |
L08 | Oxidative Dehydrogenation of Isobutane over Mesoporous Silicas Modified with Bismuth -Molybdenum | Isobutane Oxidative dehydrogenation Mesoporous silicas | 5-a | 34 | |
L09 | Fabrication and evaluation of photoelectrode film for dye sensitized solar cell by PECVD method | TiO2 nanoparticles deposition annealing | 5-h | 126 | |
L10 | Evaluation of photocatalytic activity of Ag-TiO2 thin film prepared by gas-phase deposition under visible light irradiation | Nanoparticle PECVD PVD | 5-h | 149 | |
Lunch break | |||||
L(¸á¸å) | |||||
(13:00–14:12) (Chair: Kawase M., Ushiki ikuo) | |||||
L16 | Characterization of Cu-Zn based catalysts for water-gas shift reaction under CO2-rich condition | Water-gas shift reaction CZA catalyst CO2 sorption | 5-a | 181 | |
L17 | Study on catalyst of ester | ester catalyst | 5-a | 123 | |
L18 | Maillard reaction of grilled rice balls | maillard reaction | 5-i | 28 | |
L19 | Reaction rate of waste gypsum to hydroxyapatite under a variety of conditions (Nat. Inst. Tech. or Nippon Inst. Tech. or NITechS) *Hanano Shota, | waste gypsum Hydroxyapatite | 5-i | 18 | |
L20 | Effects of the gas flow direction in the gas channel on the PEFC performance | PEFC gas channel moisture content distribution | 5-i | 2 | |
L21 | Simultaneous production of hydrogen and other chemicals using electode reaction | Electrochemistry Hydrogen Electrosynthesis | 5-i | 131 | |
(14:12–15:24) (Chair: Hirabayashi Daisuke, Nagata Hideo) | |||||
L22 | TiC based hard coating by DC plasma CVD | DC plasma CVD hard corting TiBCN | 5-h | 108 | |
L23 | Development of synthesis method of hard alumina coating | CVD Alumina coating Triethylaluminium | 5-h | 57 | |
L24 | Solubility and diffusivity of supercritical fluid in Polycaprolactone | Polycaprolactone Supercritical fluid Solubility | 8-b | 100 | |
L25 | Difference between temperature and sound of pouring water | water temperature and sound | 8-b | 25 | |
L26 | The measurement of diffusion speed of water solution interface with different concentration and its properties | diffusion speed water solution interface | 1-a | 49 | |
L27 | Qualitative analysis of chemical substances with a microwave oven | microwave oven Qualitative analysis | 1-e | 137 | |
Hall M | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
M(¸áÁ°) | |||||
(10:00–11:00) (Chair: Horiuchi Jun-ichi, Mitome Noriyo) | |||||
M01 | Cultivation of Aurantiochytrium sp. L3W using organic waste | Aurantiochytrium sp. cultivation organic waste | 7-g | 176 | |
M02 | Development of measurement method of propulsive force of new Volvox using scanning probe microscope | Volvox SPM | 7-g | 38 | |
M03 | 1,3PDO production by genetically engineered cyanobacteria employing a photobioreactor based on pH-stat operation. | biochemical engineering cyanobacteria photobioreactor | 7-a | 13 | |
M04 | High efficient D-lactic acid production from biomass by genetically modified lactic acid bacteria. | Corn cob D-lactic acid Simultaneous saccharification and fermentation | 7-a | 14 | |
M05 | Single chain antibody production by recombinant E. coli using DO-stat fed-batch culture | Fed-Batch culture E.coli DO-stat | 7-a | 20 | |
(11:00–12:00) (Chair: Harada Hiroyuki, Rie Wakabayashi) | |||||
M06 | Preparation of injection vaccine against bacterial fish disease (NIT or Nippon Inst. Tech. or NITechUC) *Shinohara Yu, | Injection vaccine | 7-e | 33 | |
M07 | Development of Transcutaneous Vaccine Delivery using Biocompatible Ionic Liquid | Ionic Liquid Transdermal vaccine Biocompatible | 7-e | 85 | |
M08 | Development of drug delivery carrier by multi-component molecular assembly | self-assembly peptide amphiphile drug delivery system | 7-e | 124 | |
M09 | Three-dimensional cultivation of supportive cell for antibody production using polymer particle having grafted polymer chain | Grafted polymer chain Three-dimensional cultivation Supportive cell for antibody production | 7-e | 68 | |
M10 | Chiral selective adsorption of triptophan with porous polymer particles impregnating phospholipid | Chiral selective adsorption porous particles phospholipid | 7-c | 178 | |
Lunch break | |||||
M(¸á¸å) | |||||
(13:00–14:12) (Chair: Kumada Y., Shimanouchi Toshinori) | |||||
M16 | purification and analysis of inhibitory subunit ¦Å of ATPsynthase | ATPsynthase inhibitory subunit ¦Å | 7-b | 39 | |
M17 | Purification of F1-ATPase and analysis of role of epsilon subunit | ¦Å subunit F$1$-ATPase High purity purification | 7-b | 19 | |
M18 | The analysis of cooperativity of Fo-c subunits in FoF1ATP synthase (Nat. Inst. Tech. or Nippon Inst. Tech. or NITechUC) *Takashima Hikaru, | FoF1ATP synthase | 7-b | 31 | |
M19 | Life hack with ethylene | Ethylene gas | 7-b | 22 | |
M20 | The influence of shells on living organisms | shell | 7-b | 26 | |
M21 | Development of nano vaccine for bacterial fish disease using new nanomaterial | nano vaccine nanomaterial | 7-b | 44 | |
(14:12–15:24) (Chair: Kamura Atsushi, Ohno Masaki) | |||||
M22 | Efficient production of therapeutic enzyme, human Kynureninase using recombinant E. coli. | Kynureninase Fed-batch E. coli | 7-b | 46 | |
M23 | Efficient production of camelid antibody fragment VHH by fed-batch culture of recombinant E. coli | VHH fed-batch E. coli | 7-b | 47 | |
M24 | Efficient recovery of exosomal vesicles using single-chain Fv immobilized solid supports | scFv Exosome CD9 | 7-b | 30 | |
M25 | Relevance of seeding density and germination. | seeding density germination | 7-d | 53 | |
M26 | Creation of "Nanophya pygmaea habitat distribution map" using environmental DNA analysis method | Nanophya pygmaea environmental DNA | 7-d | 29 | |
M27 | Kumap | Arc-GIS | 7-f | 21 | |
Hall N | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
N(¸áÁ°) | |||||
(10:00–11:00) (Chair: Miyahara Minoru, Ogi T.) | |||||
N01 | Developing a model for the critical behavior of fluids confined in nanopores | critical point molecular simulation free energy analysis | 12-a | 140 | |
N02 | Flow precision synthesis of metal-organic framework (ELM-12) toward controlling the gate adsorption phenomena | metal-organic framework gate adsorption particle size | 12-c | 87 | |
N03 | Application of metal-organic framework for drug delivery system | Zeolitic imidazolate framework-8 Indomethacin Drug delivery system | 12-c | 3 | |
N04 | Adsorption properties of zeolite agglomerates prepared by spray drying method | ion exchange strontium 4A zeolite nanoparticle | 12-d | 127 | |
N05 | Synthesis of cesium doped tungsten oxide nanoparticles via flame spray pyrolysis | cesium doped tungsten oxide NIR shielding flame spray pyrolysis (FSP) | 12-c | 50 | |
(11:00–12:00) (Chair: Goto T, Sakai Shinji) | |||||
N06 | Acylation of porous tri(ethylene glycol) monomethyl acrylate-co-2-hydxyethyl acrylate | acylation thermosensitive gel bilayer gel | 12-e | 72 | |
N07 | Recovery of lithium ion using ionic hydrogel | lithium ion recovery hydrogel | 12-e | 64 | |
N08 | Recovery of rare metal using ionic hydrogel | rare metal hydrogel recovery | 12-e | 156 | |
N09 | Development of biocompatible strong hydrogel bolts for bone fixing (Hyogo Takarazuka Kita High School) *Miyawaki Ayari, | strong hydrogel bone fixing biocompatibility | 12-e | 12 | |
N10 | Applying "Thermo-irreversibility" to Supramolecular Gel using A Dynamic Covalent Bond | Supramolecular gel Self-Assembly Dynamic Covalent Chemistry | 12-e | 79 | |
Lunch break | |||||
N(¸á¸å) | |||||
(13:00–14:12) (Chair: Naoe Kazumitsu, Watanabe Takaichi) | |||||
N16 | Cu-free clickable surface prepared by polymer coating | Click chemistry Polymer coating Cyclooctyne | 12-j | 61 | |
N17 | Amphiphilic and uniform molecular mass polymer produced by solution polymerization of amphiphilic macromonomer | Amphiphilic macromonomer Solution polymerization Uniform molecular mass | 12-j | 70 | |
N18 | Functionalization of a cellulose paper surface by coating PEGylated polymer | cellulose paper fluorine containing surfactant polymer surface | 12-j | 157 | |
N19 | Fabrication of Pulsatile Drug Release Device | Pulsatile release Drug 1-stage device | 12-j | 63 | |
N20 | Hierarchical evaluation of polarity in self-assembled aggregates composed of Span 20 / Tween 20 | Self-Assembly Polarity Fluorescence probe | 12-f | 147 | |
N21 | Preparation of liquid marbles stabilized by stearate microparticles | liquid marble stearate microparticle | 12-f | 162 | |
(14:12–15:24) (Chair: Kubo M., Nakai S) | |||||
N22 | Preparation of PLGA microcapsule using vegetable oil | PLGA Microcapsule Encapsulation | 12-f | 45 | |
N23 | Preparation of microcapsule using pickering emulsion as a template | Microcapsule Emulsion Colloidsome | 12-f | 93 | |
N24 | Spray-synthesis process of metal-organic framework UiO-66 | continuous synthesis droplet evaporation adsorption measurement | 12-k | 136 | |
N25 | Synthesis of Anatase Type Titanium Dioxide Based Powder by Polymerizable Complex Method and Fabrication of Sintered Body | Titanium Dioxide Polymerizable Complex Method Sintering | 12-k | 115 | |
N26 | Synthesis and Bioactive Evaluation of CaO-ZnO-P2O5 Glass by Melt-Quenching Method | Biomaterial Phosphate Glass Melt-Quenching Method | 12-k | 116 | |
N27 | Synthesis and Bioactive Evaluation of CaO-ZnO-P2O5 Glass by Chelate Gel Method | Biomaterial Phosphate Glass Chelate Gel Method | 12-k | 117 | |
Hall O | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
O(¸áÁ°) | |||||
(10:00–11:00) (Chair: Ashida R., Shigeno K.) | |||||
O01 | Modification of Surface Properties of Micro, Nano-patterned Polymer Sheets by Supercritical Spray Coating of Fluorine Polymer | Fluorine Polimer Patterned Polymer Surface Supercritical Fluids Spray | 8-e | 143 | |
O02 | Microcellular foaming of poly(ethylene-co-acrylic acid) using high pressure gases | supercritical fluid foaming | 8-e | 144 | |
O03 | Development of Rubber Composites by High-Pressure Fluid Mixing Method | High-pressure fluid mixing Rubber composites Payne effect | 8-e | 169 | |
O04 | Synthesis of monodisperse particles and investigation of the effect of particle factors to rheology properties. | suspension monodisperse viscosity | 12-i | 67 | |
O05 | Immobilization of liposome on graphene oxide | liposome graphene oxide immobilization | 12-m | 154 | |
(11:00–12:00) (Chair: Watanabe Takaichi, Shimanouchi T.) | |||||
O06 | Preparation of novel functionalized mesoporous silica using supercritical fluid method | Supercritical fluid Mesoporous silica Extraction | 8-e | 73 | |
O07 | Deposition process of drug onto mesoporous silica using supercritical method | Supercritical fluid deposition Drug delivery system Mesoporous silica | 8-e | 81 | |
O08 | Development of a new manufacturing method of mesoporous carbon utilizing a solid-solid reaction | Carbon gasification Iron oxide Solid-solid reaction | 9-c | 41 | |
O09 | High-efficiency power generation from low-rank coal utilizing redox reactions of liquid phase inorganic substance | low-rank coal high-efficiency power generation redox reactions | 9-c | 42 | |
O10 | Rate analysis of weathering reactions of coking coal | coking coal weathering rate equation | 9-c | 56 | |
Lunch break | |||||
O(¸á¸å) | |||||
(13:00–14:12) (Chair: Kimura Yukitaka, Kihara S.) | |||||
O16 | Analysis of release mechanism of corrosion inhibitor from self-healing corrosion protective coating | Self-healing Corrosion inhibitor Release | 12-i | 36 | |
O17 | Corrosion behavior of carbon steel under boiler water simulated flow environment | Erosion/Corrosion Carbon pipe boiler water | 12-m | 118 | |
O18 | Study on evaluation of corrosion resistance of painted steel sheet | corrosion painted steel sheet blistering | 12-m | 122 | |
O19 | Ultra-Low Temperature Sintering of Calcium Carbonate and Evaluation of Its Property | Calcium Carbonate Ultra-Low Temperature Sintering | 12-m | 114 | |
O20 | (withdrawn) | 100 | 113 | ||
O21 | Synthesis of Ag-Cu-Ti-Nb-O Type Novel Complex Oxide | Alumina Sintering Additive Novel Complex Oxide | 12-m | 112 | |
(14:12–15:12) (Chair: Isomoto Y., Yabuki A.) | |||||
O22 | Non-shrinking Firing of Alumina Ceramics Containing Cu-Ti-Nb-O Additive | Alumina Ceramics Non-shrinking Firing | 12-m | 111 | |
O23 | Creation of superconductor | superconductor | 12-m | 27 | |
O24 | Glass production using yellow feldspar haze basalt | Glass manufacturing | 12-m | 23 | |
O25 | Seeking All-purpose sunscreen ~Kita high school's summer has come~ | sunscreen ultraviolet ray oil | 12-m | 35 | |
O26 | Direct measurement of interaction between a particle and a plant cell using atomic force microscopy | AFM BY-2 PLGA | 12-m | 43 | |
Hall P | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
P(¸áÁ°) | |||||
(10:00–11:00) (Chair: Yabuki A., Takata Kazutaka) | |||||
P01 | Study on the chemical heat pump system using cold heat generation by mixing solute and solvent | Chemical Heat Pump Urea Cold heat generation | 3-b | 97 | |
P02 | Heat transfer enhancement in packed bed for improvement of the chemical heat storage devices | Heat transfer enhancement Packed bed Bridge formation | 3-b | 96 | |
P03 | Heat transfer performance of a double pipe heat exchanger with vibrating blades | heat transfer Nusselt number double pipe heat exchanger | 3-c | 139 | |
P04 | Numerical analysis of temperature and concentration fields during InGaSb crystal growth in International Space Station (School of Eng. chemistry, Osaka univercity) *Oda Yuya, (Graduate school of Eng. Sci., Osaka univercity) Jin Xin, | InGaSb crystal growth International Space Station | 3-a | 55 | |
P05 | Numerical Analysis for Optimization of Chemical Heat Storage Device Using EM8 | EM8 packed bed reactor Numerical Simulation chemical heat storage | 3-a | 130 | |
(11:00–12:00) (Chair: Nakaso K., Atsushi SEKIMOTO) | |||||
P06 | A study on the prediction of performance and optimum design of heat exchanger | heat exchanger CFD optimum design | 3-c | 10 | |
P07 | Prediction of visible plume from a cooling tower | cooling tower plume cfd | 3-f | 16 | |
P08 | MRI recognize the difference of¡¡concentration and temperature | MRI T1 T2 concentration temperature | 3-e | 32 | |
P09 | Synthesis of Thin Film for Supercapacitors by Low Temperature Thermal Decomposition of Manganese Formate Complex | Supercapacitors | 11-a | 4 | |
P10 | Thermoelectric property of Organic-Inorganic Hybrid Films based on PEDOT-PSS/Metal Nanoparticles | Thermoelectric PEDOT-PSS Nanoparticle | 11-b | 37 | |
Lunch break | |||||
P(¸á¸å) | |||||
(13:00–14:12) (Chair: Takaoka Daizo, Harada Hiroyuki) | |||||
P16 | Electrodeposition of ZnS and control of its optical proparty | ZnS photocatalyst electrodeposition | 11-a | 133 | |
P17 | Sol-gel synthesis of Al-doped HfO2 ferroelectric thin film | Ferroelectrics Sol-gel Hafnium Oxide | 11-b | 98 | |
P18 | Evaluation of PZT capacitor using conductive oxide electrode | ferroelectric capacitor ferroelectric sol-gel | 11-b | 99 | |
P19 | Development of conductive copper complex inks for low temperature process at less than 100 degree | Printable electronics High conductivity Low temperature heating | 11-c | 54 | |
P20 | The Sludge Cell of Lake Shinji & Winnd | Sludge of Lake Shinji Dissolved oxygen Savonius type windmill | 11-a | 1 | |
P21 | Nature between adjacent 4 terms of Fibonacci sequence | Fibonacci sequence | 14-e | 24 | |
(14:12–15:12) (Chair: Ohmura Naoto, Kang Soonchul) | |||||
P22 | Development of waste water purification by the microbial fuel cell | water purification microbial fuel cell generation | 13-b | 58 | |
P23 | Pottasium¡¡extract and recovery from biomass inicinerated ash | biomass potassium recovery | 13-e | 168 | |
P24 | Microbial recovery of precious metals from acidic solutions using yeast cells | biorecovery palladium gold | 13-e | 105 | |
P25 | Theoretical Study of Hydrogen and Water Clusters | Cluster Hydorogen water | 14-e | 48 | |
P26 | Countermeasure of Crackled Static Elecricity | The Charge Amount Safety | 10-h | 86 | |
Hall Q | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
ÆÃÊֱ̹顦ɽ¾´¼° | |||||
Q29 | Action of one company for the industrialization of the brewing technology | Plenary lecture | 17-a | 182 | |
Awards ceremony | |||||
Hall R | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
¸òή²ñ | |||||
Exchange meeting |