Day 1 | |||||
---|---|---|---|---|---|
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
-Student Award Oral- | |||||
(10:30–12:00) (Chair: Seiichi Ota) | |||||
A107 | Multistage process of additive winterization for the pseudo biodiesel fuel having a high content of saturated FAME | Biodiesel Additive Winterization | 4-j | 1 | |
A108 | Influence of addition profile on anti-solvent crystallization process of acetylsalicylic acid | anti-solvent crystallization controlled feeding monodispersed crystals | 12-g | 50 | |
A109 | Examination of the low-pressure operational model for establishing the hydrate-based CO2 capture | hydrate carbon dioxide semi-clathrate | 4-j | 6 | |
A110 | Influence of feed condition on semi-batch cooling crystallization of K-alum | crystallization semi-batch cooling crystal size distribution | 12-g | 51 | |
A111 | Evaluation of separation performance of saturated FAME by additive winterization in pseudo BDF | Biodiesel Winterization Additive | 4-j | 42 | |
A112 | Adsorption ability of chitosan membrane embedded with Prussian Blue for cesium ion removal | chitosan Prussian Blue cesium ion | 4-e | 103 | |
(12:50–14:05) (Chair: Mikio Sakai) | |||||
A116 | Study on degradation mechanism of hydrogen-selective silica membranes induced by water vapor | Silica membrane Hydrothermal stability Densification | 4-a | 27 | |
A117 | Extraction of cesium ion from aqueous solution using Freon | Extraction Cesium Freon | 4-f | 12 | |
A118 | Recovery of precious metals from spent printed circuit boards by chlorination | Chlorination Precious metals Printed circuit boards | 4-i | 22 | |
A119 | HEAT TRANSFER BEHAVIOR DURING GAS HYDRATE SLURRY DECOMPOSITION FOR HYDRATE-BASED GAS SEPARATION | Gas hydrate Gas separation Heat balance | 4-j | 52 | |
A120 | Removal of trace ammonia by adsorption for hydrogen purification | Ammonia Adsorption Hydrogen Energy | 4-e | 40 | |
(14:15–15:30) (Chair: Masanao Imai) | |||||
A122 | Effect of surfactant on mass transfer characteristics and flow configuration in hydrate formation | Gas hydrate Gas separation Mass transfer | 4-j | 5 | |
A123 | A numerical evaluation of inertial attractors of focusing particles in microchannels | Inertial Microfluidics Particle/cell separation DEM-DNS | 4-j | 75 | |
A124 | Winterization of pseudo biodiesel fuel by the circulation cooling loop using a static mixer | Biodiesel Static mixer Winterization | 4-j | 15 | |
A125 | Removal of the hydrogen sulfide gas in methan gas using various adsorbents | Adsorbents Hydrogen sulfide gas methan gas | 4-e | 66 | |
A126 | Influence of crosslinkers on the chiral selective gate effect and the inner structure of molecularly imprinted membrane | Gate effect membrane molecularly imprinted polymer | 4-a | 23 | |
Day 2 | |||||
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
Symposium <Chemical engineering for revitalization from earthquake disaster> | |||||
(9:00–10:00) (Chair: Yasuhiro Fukushima) | |||||
A201 | Importance of quantitative understanding in radioactive-decontaminations | Nuclear plant accident Decontamination Misunderstanding | S-1 | 79 | |
A202 | Properties of soil contaminated by radioactive cesium | radioactive cesium soil | S-1 | 98 | |
A203 | Volume reduction technology of incineration ash containing radioactive material | hydrothermal reaction radioactive cesium volume reduction technology | S-1 | 83 | |
A204 | Stabilisation and volume reduction of ash and sludge containing radioactive substances at low concentration using melting furnace with emulsion burner | emulsion burner melting furnace stabilisation | S-1 | 119 | |
(10:00–11:00) (Chair: Ken-ichi Kurumada) | |||||
A205 | Contribution of process systems engineering in innovation of technologies: Examples from biofuel development projects | biofuel innovation of technology systems process systems engineering | S-1 | 106 | |
A206 | Development of off-site equipment for distributed biodiesel production without catalyst regeneration | biodiesel production ion-exchange resin equipment development | S-1 | 115 | |
A207 | Operation of photovoltaic plant in a less-populated area | Renewable energy Energy network Revitalization | S-1 | 80 | |
A208 | Characteristics and utilization of copper slag obtained from reverberatory furnace | Copper smelter slag Chemical recycling Acid extraction | S-1 | 90 | |
(11:00–12:00) (Chair: Masahide Hagiri) | |||||
A209 | Post-earthquake reconstruction: fire and explosion safety | Fire Explosion Great East Japan Earthquake | S-1 | 78 | |
A210 | How should NIT Fukushima contribute to the decommissioning project? | NIT Fukushima decommissioning project | S-1 | 111 | |
A211 | Development of seawater decontamination system | seawater decontamination adsorbent regeneration EDTA | S-1 | 107 | |
A212 | Development of closed system for desorption solution including EDTA-metal complexes by use of electrodialysis accompanied by chemical reactions | regeneration electrodialysis EDTA | S-1 | 108 | |
Symposium <Chemical engineering contributing to green chemistry advancement> | |||||
(13:00–13:30) (Chair: Daisuke Kodama) | |||||
A217 | [Invited lecture] Development of Environmentally Benign Chemical Processes Using Green Solvents | green chemical processes ionic liquids supercritical fluids | S-2 | 60 | |
(13:30–14:15) (Chair: Takafumi Sato) | |||||
A219 | Aqueous two phase extraction of albumin using ionic liquid and deep eutectic solvents | Aqueous two phase Green solvent Extraction | S-2 | 4 | |
A220 | Grinding treatment and enzymatic saccharification characteristics of woody biomass | woody biomass grinding enzymatic saccarification | S-2 | 120 | |
A221 | Preparation of Cu/ZnO/Carbon catalysts by pyrolysis of woody biomass for methanol steam reforming | Woody biomass Cu/ZnO catalyst Steam reforming | S-2 | 88 | |
(14:15–15:00) (Chair: Noriko Yamauchi) | |||||
A222 | Gasification of wasted wood building materials for light diesel oil production | Gasification Wasted wood building materials Light diesel oil | S-2 | 100 | |
A223 | Effect of surfactant removal method on properties of gold nanoparticle-assembled mesoporous silica nanospheres | Gold nanoparticle Mesoporous silica nanosphere Anionic surfactant | S-2 | 31 | |
A224 | Improvement of transparency in nanocomposite films incorporating surface-modification BaTiO3 nanoparticles | nanocomposite transparency permittivity | S-2 | 33 | |
Break | |||||
(15:15–16:15) (Chair: Naoya Kotake) | |||||
A226 | Development of flocculant for magnetic separation of soil particles in suspension | Magnetic separation Temperature-responsive polymer Flocculant | S-2 | 85 | |
A227 | Effect of preparation condition change of Ni/Al2O3 structured catalyst on methane dry reforming | Structured catalyst Methane dry reforming Electroless plating | S-2 | 87 | |
A228 | Metal Recovery from a Ground in-Vehicle Circuit Board by the Elutriation (Graduate School of Sci. and Eng., Yamagata U.) *Kimat M, | metal recovery grinding circuit board | S-2 | 92 | |
A229 | Synthesis of chemical hydride through hydrogenation by the electrolysis of water using a hydrogen permeable palladium membrane electrode | electrolysis of water hydrogen permeable membrane hydrogenation | S-2 | 86 | |
(16:15–17:00) (Chair: Daisuke Nagao) | |||||
A230 | Effect of shapes of roller surface on grindability of coals by using a vertical roller mill | Roller mill Shape of roller surface coal grindability | S-2 | 77 | |
A231 | Time-series image processing as a facile method for characterizing transient and amorphous kinematics of semi-fluid | image processing apparent motion amorphous moving object | S-2 | 63 | |
A232 | One-pot formation of hydrophobized polysiloxane particles for immobilization of the hydrophobized glycopolypeptide | hydrophobized particle polysiloxane hydrophobized glycopolypeptide | S-2 | 53 |