Last modified: 2024-06-18 12:32:12
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
2. Fluid & particle processing | |||||
(9:00–10:00) (Chair: | |||||
I201 | Analysis of Etching and Flow Dynamics on a Substrate by Sprays | CFD Wet Etching Spray | 2-a | 392 | |
I202 | Numerical investigation on influence of ultrasonic frequency on the rectified diffusion of acoustic cavitation | rectified diffusion numerical simulation acoustic cavitation | 2-a | 431 | |
I203 | Characteristics of flow and heat transfer in conical Taylor vortex flow | Conical Taylor-Couette flow Heat transfer Numerical simulation | 2-a | 639 | |
(10:00–11:00) (Chair: | |||||
I204 | The evaluation of laminar mixing with a local fractal dimension distribution in an oscillatory baffled reactor | Laminar mixing Poincare map Fractal dimension | 2-a | 326 | |
I205 | Free-energy lattice Boltzmann model for ternary fluid flows with wetting | Lattice Boltzmann method Ternary fluid Wetting | 2-a | 726 | |
I206 | [Featured presentation] State identification of single-component gas-liquid two-phase jet by thermodynamic model and visualization experiment | first law of thermodynamics gas-liquid phase change visualization | 2-a | 607 | |
(11:00–12:00) (Chair: | |||||
I207 | Investigation of ice sublimation and heat transfer characteristics by radiation heating during freeze-drying | freeze-drying heat transfer sublimation | 2-a | 108 | |
I208 | Opposite effects of a reaction-driven viscosity decrease on miscible viscous fingering depending on the injection flow rate | Viscous fingering Reacting flow numerical simulation | 2-a | 697 | |
I209 | Application of consistent mass-momentum scheme for two-phase flow to dam break problem | consistent scheme two-phase flow VOF | 2-e | 33 | |
(13:00–14:00) (Chair: | |||||
I213 | Relationship between thermodynamic entropy and permutation entropy characterizing pseudo-two-dimensional turbulence | permutation entropy entropy production Viscous Fingering | 2-e | 56 | |
I214 | Verification Study of CFD Prediction Accuracy of Two-phase Flow Induced Fluid Force Fluctuations for Evaluating Flow Induced Vibration | Flow Induced Vibration Two Phase Flow Piping Bend | 2-e | 305 | |
I215 | Numerical Analysis on Motion of Charged Particle in Human Lung | CFD DEM Aerosol | 2-e | 342 | |
(14:00–15:00) (Chair: | |||||
I216 | [Featured presentation] Numerical analysis of conditions for detachment of oil droplet from wall surface by microbubble | Microbubble Degreasing Numerical simulation | 2-e | 49 | |
I217 | Surface modification of fine bubbles using molecular film coating | fine bubble micro bubble surface modification | 2-e | 708 | |
I218 | Numerical simulations of drop breakup in strong linear shear flow with a moving top wall and a stationary bottom wall | Drop breakup Shear flow Numerical analysis | 2-e | 460 | |
(15:00–16:00) (Chair: | |||||
I219 | Collision and mixing phenomena of two Leidenfrost droplets | Leidenfrost droplet Mixing Droplet reactor | 2-e | 540 | |
I220 | Numerical simulation of droplet behavior in a steady flow. | droplet deformation multiphase flow numerical simulation | 2-b | 712 | |
I221 | Flow and mixing ability in a rotating cylindrical container with liquid-gas interface | Liquid-gas interface Numerical simulation Mixing | 2-b | 646 | |
(16:00–17:00) (Chair: | |||||
I222 | Mixing with variable shear rates by using a precessing container | Mixing Shear rates Precession | 2-b | 664 | |
I223 | Simulation of Stirring in a Bioreactor using the Lattice Boltzmann Method | Computational Fluid Dynamics Lattice Boltzmann Method Stirring | 2-b | 126 | |
I224 | Method for predicting the size of transition metal complex hydroxides precipitated in a stirred-tank semi-batch reaction crystallizer using CFD and particle agglomeration models | turbulent mixing precipitation agglomeration model | 2-b | 666 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 89th Annual Meeting (Sakai, 2024)