Japanese page RELOAD
SCEJ

SCEJ 89th Annual Meeting (Sakai, 2024)

Last modified: 2024-12-13 11:36:26

Hall and day program : Day 2

The preprints can be viewed by clicking the Paper IDs.
The ID/PW sent to the Registered participants and invited persons are required.

Day 2(Mar. 19)

Hall A | Hall B | Hall C | Hall D | Hall E | Hall F | Hall G | Hall H | Hall I | Hall J | Hall K | Hall P | Hall P | Hall T
SS-1 | 0-d | SS-2 | F-1 | SS-3 | HC-11 | 0-f | 9 | K-3 | X-53 | 3 | 5 | 4 | 7 | 2 | 12,14 | 13 | 6 | 11 | PS-B | PS-C | SP-3

TimePaper
ID
Title / AuthorsKeywordsTopic codeAck.
number
Hall A(B3 1F 117)
SS-1 Technology Innovation from Japan, Spreading its Wings to the World
(9:00–9:05) (Chair: Ogawa Shigeyasu)
9:009:05Remark
(Kaneka) (Reg)Ogawa Shigeyasu
(9:05–9:45) (Chair: Ogawa Shigeyasu)
9:059:45A201[Invited lecture] Overall picture of initiatives aimed at realizing a platinum society
forest circular economy
biomass chemistry
platinum society
SS-1137
(9:50–11:15) (Chair: Imanaka Teruo)
9:5010:30A203[Invited lecture] Hydrogen/Ammonia-fired Gas Turbine Initiatives for Carbon Neutrality
Gas Turbine
Hydrogen
Ammonia
SS-1138
10:3511:15A205[Invited lecture] Innovation in peptide manufacturing that is being tackled by Japan technologies
Peptide manufacturing
Middle molecules
Japan technologies
SS-1139
(11:20–12:00) (Chair: Nakayama Yasushi)
11:2012:00A207[Invited lecture] Product development of nanoporous ceramic membranes and application to next-generation chemical processes
Membrane
Separation
Membrane reactor
SS-1140
0-d The SCEJ Award for Outstanding Technological Development
(12:40–13:45) (Chair: Imanaka Teruo)
12:4012:45The SCEJ Award for Outstanding Technological Development and The SCEJ Award for Outstanding Young Engineer
(Soken Tecnix) (Reg)Imanaka Teruo
12:4513:05A212[The SCEJ Award for Outstanding Technological Development] Development of monitoring and control technology for amino acid fermentation process using machine learning
The SCEJ Award for Outstanding Technological Development
0-d747
13:0513:25A213[The SCEJ Award for Outstanding Technological Development] Development and productization of high-precision wet classifier "i Classifier"
The SCEJ Award for Outstanding Technological Development
0-d748
13:2513:45A214[The SCEJ Award for Outstanding Young Engineer] Scale-free soft sensor for fluidized bed granulation process monitoring
The SCEJ Award for Outstanding Young Engineer
0-e749
SS-2 Resource Recycling Technology for Future Society
(13:45–14:00) (Chair: Maeda Haruhiko)
13:4514:00Introduction to Industrial Development Workshop and Kansai Industrial Development Committee
(Tanabe Willtec) (Reg)Tanabe Hiroyasu, (Heishin) (Cor)Sukenaga Akitoshi
(14:00–14:40) (Chair: Maeda Haruhiko)
14:0014:40A216[Keynote lecture] Development of separation technology to achieve both carbon neutrality and resource circulation
Recycling
Lithium ion battery
Electrical Pulsed Discharge
SS-2141
(14:40–15:20) (Chair: Sukenaga Akitoshi)
14:4015:20A218[Invited lecture] Overview of Precious Metal Recycling
Precious Metal
Recycling
Refining
SS-2143
15:2015:30Break
(15:30–16:10) (Chair: Tanabe Hiroyasu)
15:3016:10A221[Invited lecture] Challenges and Measures for plastics circuler development - A case of plastic gasification process -
gasification
chemical recycling
resource saving
SS-2752
(16:10–17:30) (Chair: Ogawa Tomohiro)
16:1016:50A223[Invited lecture] Biomass material from Japanese SUGI, Glycol-LIGNIN
Biomass material
Japanese SUGI
Decarbonization
SS-2144
16:5017:30A225[Invited lecture] Applying microbial metabolic reactions to produce aromatic chemicals from biomass resources
Metabolic engineering
Enzyme engineering
Fermentation
SS-2146
Hall B(B3 1F 118)
F-1 Evaluation Remaining Life under the Aging of Chemical Equipment, and Extending its Life by Repair
(9:00–10:20) (Chair: Kubouchi Masatoshi)
9:009:40B201[Invited lecture] TBA
*
F-1793
9:4010:00B203[Requested talk] TBA
*
F-1794
10:0010:20B204[Invited lecture] TBA
*
F-1795
10:2010:40Break
(10:40–12:00) (Chair: Shibasaki Toshikazu, Mitomo Nobuo)
10:4011:00B206[Requested talk] TBA
*
F-1796
11:0011:20B207[Requested talk] TBA
*
F-1797
11:2011:40B208[Requested talk] TBA
*
F-1798
11:4012:00B209[Requested talk] TBA
*
F-1799
SS-3 "Management Problems in the Chemical Industry" Discussion about the Chemical Industry toward 2030~50 -Corporate Management at a Historical Turning Point-
(13:00–13:10) (Chair: Takeda Kazusada)
13:0013:10Introduction to Research Management Committee / Session guidance
(Miyaki/Toray Corporate Business Res.) Miyaki Hirotaka
(13:10–14:40) (Chair: Yasui Makoto)
13:1013:50B214[Keynote lecture] Challenges and Opportunities for Japan as Seen in the IMD Competitiveness Rankings
IMD
Competitiveness
Japan
SS-3800
13:5014:30B215[Keynote lecture] Global trends and Japan’s current situation and challenges:
Complexity
Geopolitical risks
Three-tier analogy and data despotism
SS-3801
14:3014:40Break
(14:40–15:20) (Chair: Kosuge Michitaka)
14:4015:20B217Research on Challenge to re-competitiveness in Chemical Industry and other Industries -interim Report
Competition Ranking
Rearrangement of Business
Reform of Organization and business Purpouse
SS-3804
(15:20–16:20) (Chair: Shiojiri Susumu)
15:2015:50B219[Invited lecture] Fujifilm's Sustainable Growth History
Crisis
management's decision
researcher's challenge
SS-3802
15:5016:20B220[Invited lecture] The innovation strategy that has led Daikin Industries' growth
Open innovation
Globalization
Environmental consciousness
SS-3803
(16:20–17:30) (Chair: Matsuda Jun)
16:2017:30General discussion
Speakers
Hall C(B3 1F 119)
HC-11 Diversity Forum
(12:10–13:00) (Chair: Yoshimune Miki)
12:1012:35C211[The SCEJ Award for Outstanding Women's Activity] Expanding the job scope for female engineers at engineering companies
The SCEJ Award for Outstanding Women's Activity
HC-11750
12:3513:00C212[The SCEJ Award for Outstanding Women's Activity] Chemical Engineering Study by Functional Polymers
The SCEJ Award for Outstanding Women's Activity
HC-11751
0-f The SCEJ Award for Outstanding Asian Researcher and Engineer
(15:00–15:40) (Chair: Matsumura Yukihiko)
15:0015:40C219[The SCEJ Award for Outstanding Asian Researcher and Engineer] Functional Materials for Sustainable Catalysis
The SCEJ Award for Outstanding Asian Researcher and Engineer
0-f759
9. Energy engineering
(15:40–16:00) (Chair: Matsumura Yukihiko)
15:4016:00C221[The SCEJ Award for Outstanding Research Achievement] A predictive approach in reaction engineering for designing carbon resource conversion process including multi-component mixtures with elementary reaction based chemical kinetic modeling
The SCEJ Award for Outstanding Research Achievement
0-b743
(16:00–17:00) (Chair: Yamaki Ayumi, Norinaga Koyo)
16:0016:20C222CO2 gas decomposition to carbon by reduced iron ore
CO2 decomposition
carbon production
reduced iron ore
9-c323
16:2016:40C223[Featured presentation] Role of alkali metals in ash adhesion at high temperatures
Ash
Adhesion
Alkali metal
9-c484
16:4017:00C224Effect of reducing gas and oxygen partial pressure on hydrogen formation reaction with chemical looping method
Chemical looping
Ilmenite
Hydrogen formation
9-c739
Hall D(B3 1F 116)
K-3 Recent Research and Development of Supercritical Fluid Technology 2024
(9:00–9:30) (Chair: Watanabe Masaru)
9:009:30D201[Invited lecture] Integrated Grain Fractionation for Functional Ingredients
Supercritical CO2
Food
K-3784
(9:30–10:00)
9:3010:00D202[Invited lecture] Rapid continuous extraction of organic compounds from liquids using supercritical CO2
(AIST) (Reg)Fujii T.
Supercritical CO2
Liquids
Extraction
K-3774
(10:00–11:00) (Chair: Osada Mitsumasa)
10:0010:30D204[Invited lecture] Development and applications of nanomaterials synthesized via supercritical hydrothermal synthesis
Supercritical water
Hydrothermal synthesis
Nanomaterials
K-3775
10:3011:00D205[Invited lecture] Development of hydrothermal leaching technology for recycling of spent lithium-ion batteries
Hydrothermal technology
Solid wastes
Recycling
K-3776
(11:00–11:30) (Chair: Ota Masaki)
11:0011:30D207[Invited lecture] Applications of supercritical fluid technology in biodiesel production
Supercritical fluid technology
Biodiesel
Biomass conversion
K-3777
(11:30–11:40)
11:3011:40Closing remarks
(Tohoku U.) (Reg)Watanabe Masaru
X-53 Physical Properties of the Future
(12:55–13:00)
12:5513:00Opening remark
(Nihon U.) (Reg)Kodama D.
(13:00–13:40) (Chair: Kodama Daisuke)
13:0013:20D213[Invited lecture] Physical property prediction from small dataset using transfer learning
(AIST) (Reg)Furuya T.
phase equilibria
physical properties
chemical engineering
X-53207
13:2013:40D214[Invited lecture] What are the companies looking for in terms of physical properties?
physical property
X-53318
13:4014:00Break
(14:00–15:00) (Chair: Yamada Hidetaka)
14:0015:00Panel discussion
(Tohoku Inst. Tech.) (Reg)Sato Y., (AIST) (Reg)Furuya T., (Toyo Eng.) (Reg)Sasaki M., (INPEX) (Reg)Yamada J., (Kureha) (Reg)Otawara K.
15:0015:20Mixer
(15:20–16:20) (Chair: Furuya Takeshi)
15:2015:40D220[Invited lecture] Physical property prediction from small dataset using transfer learning
Artificial intelligence
Neural network
Transfer learning
X-53113
15:4016:00D221[Invited lecture] Fragment-based Ab Initio Molecular Simulation for Predicting Physicochemical Properties of Functional Liquids
Physicochemical Properties
Molecular Simulation
Functional Liquids
X-53514
16:0016:20D222[Invited lecture] Analysis of CO2 absorption of semi-clathrate hydrate slurries added with PVA
gas absorption
semi-clathrate hydrate
phase equilibria
X-53678
(16:20–17:20) (Chair: Sugahara Takeshi)
16:2016:40D223[Invited lecture] Gas separation properties of semiclathrate hydrates
gas hydrate
semiclathrate hydrate
gas capture
X-53114
16:4017:00D224[Invited lecture] High-throughput measurement of physical properties to accelerate the development of CO2 absorbents
CO2 capture
Physical properties
absorbent
X-53175
17:0017:20D225[Invited lecture] Physical Properties and CO2 Absorption Characteristics of Blended Ionic Liquids for Low Partial Pressure CO2 Capture
(AIST) (Reg)Makino T.
Ionic liquid
CO2 capture
CO2 solubility
X-53388
Hall E(B3 2F 205)
3. Thermal engineering
(13:00–14:20) (Chair: Nakaso Koichi, Nogami Hiroshi)
13:0013:20E213Advanced effective utilization of waste plastic energy Part 1:Surface modification technology of heat transfer tubes
energy recovery
high temperature corrosion
ash deposition control
3-d84
13:2013:40E214[Featured presentation] Advanced Effective Utilization of Waste Plastic Energy Part 2: Cooling energy utilization technology of waste heat
energy recovery
ice making
absorption refrigerator
3-d87
13:4014:00E215The optimization on the carbonization of cashew nut shell waste
Cashew nut shell
carbonization
Waste utilization
3-b709
14:0014:20E216The relationship between the flow rate and temperature of the debris cooling water, the ambient temperature and the temperatures of the RPV and PCV at 1F Unit 2.
debris
RPV temperature
PCV temperature
3-f182
Hall F(B3 2F 206)
5. Chemical reaction engineering
Organized Session (CVD Reactions Section, Division of Chemical Reaction Engineering)
(9:00–10:00) (Chair: Shimogaki Yukihiro, Shimizu Hideharu)
9:009:20F201Reaction Rate Equation Determination of Chemical Vapor Deposited Bismuth-based Perovskite Thin Film
Chemical vapor deposition
Methylammonium bismuth iodide
Perovskite solar cell
5-h686
9:209:40F202Evaluation of Reactive sputtered MAX alloy thin films with reducing gas
sputtering
MAX-phase
5-h787
9:4010:00F203Rate analysis of carbon CVD from hydrocarbons with different degrees of unsaturation
CVD
carbon
coking
5-h785
(10:00–11:00) (Chair: Kawase Motoaki)
10:0010:20F204Exploring the large-area graphene CVD conditions by machine learning assisted image analysis
Graphene
Chemical vapor deposition
Machine learning
5-i302
10:2010:40F205Stable and continuous synthesis of carbon nanotubes by floating catalyst CVD with fluid mixing control
carbon nanotube
chemical vapor deposition
continuous process
5-h225
10:4011:00F206Reduction of reaction mechanism of SiC-CVI
SiC-CVI
CH3SiCl3
Reduced model
5-h562
(11:00–12:00) (Chair: Noda Suguru, Tamaoki Naoki)
11:0011:20F207Research on improving uniformity in furnace and high speed SiC infiltration in the production of SiC-CMC using Chemical Vapor Infiltration method.
SiC
CVI
CVD
5-h233
11:2011:40F208Exploration of exhaust gas reforming conditions to improve yield and reduce by-product formation in SiC-CVI with high MTS partial pressure
CVI
SiC
Recycling
5-h633
11:4012:00F209Strategy for CVI process development in SiCf/SiC-CMC production
CVI
SiC
Process design
5-h634
(13:20–14:20) (Chair: Muranaka Yosuke)
13:2013:40F214Influence of binder added zeolite catalyst on hydrotreating of vegetable oil
binder
vegetable oil
zeolite
5-a628
13:4014:00F215Saccharification of Cellulose by Using Mesoporous Carbons
Mesoporous carbon
Saccharification
Cellulose
5-a671
14:0014:20F216Reactive extraction process of lignin under hydrothermal condition: a use of slug flow of qater/organic biphasic system
vanilin
slug flow
hydrothermal reaction
5-d714
(14:20–14:40) (Chair: Uemiya Shigeyuki)
14:2014:40F217[The SCEJ Award for Outstanding Young Researcher] Mechanistic understanding of catalytic reaction utilizing automated flow reactor systems
The SCEJ Award for Outstanding Young Researcher
0-c745
(15:00–16:00) (Chair: Asano Shusaku)
15:0015:20F219Polymer immobilization catalysts using machine learning methods
Polymer Immobilized Catalyst
Machine Learning
Pd
5-f717
15:2015:40F220Kinetic analysis of Claisen rearrangement using near-infrared spectroscopy and transient flow method
automated flow reactor
NIR
kinetic analysis
5-f136
15:4016:00F221Evaluation of the mass transfer model and analysis of the error causes for the Taylor flow reactor with hydrogenation reaction
Taylor flow
Gas-Liquid reaction
Mass transfer
5-f406
(16:00–17:00) (Chair: Miura Yoshiko)
16:0016:20F222Oxygen Transport Analysis in Meso Pores of Carbon Support for Polymer Electrolyte Fuel Cells by Reactive Molecular Dynamics Method
Polymer Electrolyte Fuel Cell
Catalyst Layer
Reactive Molecular Dynamics Method
5-a52
16:2016:40F223Graphical Analysis of Infinite Number of First-order Parallel Reactions
Kinetic analysis
DAEM
Activation energy
5-i307
16:4017:00F224Modeling of Autocatalytic Reaction by Cylindrical Particle with Finite Length
cylindrical particle with finite length
autocatalytic reaction
reaction-diffusion equation
5-i98
Hall G(B3 2F 207)
4. Separation processes
(9:20–10:20) (Chair: Hara Nobuo)
9:209:40G202Numerical Study of Concentration Process of Aqueous Organic Solvent Solutions by Osmotically Assisted Reverse Osmosis (OARO)
Osmotically Assisted Reverse Osmosis
Aqueous Organic Solvent
Concentration Process
4-a241
9:4010:00G203Breaking through organic solvent reverse osmosis limitations: Unveiling the role of membrane-solvent interaction in polar/non-polar separations
Prganic solvent reverse osmosis
Polyamide membrane
Surface repair engineering
4-a566
10:0010:20G204Concentration of organic solvent aqueous solutions by RO via organosilica membranes modified by atmospheric-pressure plasma
Reverse osmosis
membrane
plasma
4-a72
(10:40–11:20) (Chair: Nagumo Ryo)
10:4011:00G206Sewage concentration by forward osmosis for methane fermentation
Forward osmosis
Concentration
Methane fermentation
4-a430
11:0011:20G207Post-treatment of MFI zeolite membranes for organic solution permeation
silicalite-1 type MFI membrane
organic solvent pervaporation
modified alkaline treatment
4-a425
(11:20–12:00) (Chair: Nagasawa Hiroki)
11:2011:40G208Fundamental investigation on interaction between membrane and foulants in hexane solution by using quartz crystal microbalance
organic solvent nanofiltration
membrane fouling
quartz crystal microbalance
4-a710
11:4012:00G209Surfactant -regulated polyamide nanofiltration membranes for highly efficient Li+/Mg2+ separation
Surfactant
Interfacial polymerization
Nanofiltration membrane
4-a570
(13:00–14:00) (Chair: Mino Yasushi)
13:0013:20G213Kinetics analysis of pH hysteresis of zeta potential in alumina porous membrane
microfiltration
zeta potential
pH hysteresis
4-b549
13:2013:40G214Development of hydrophilic/sterilized TA-CaCO3 functional-layer membrane for the oily wastewater treatment
Antifouling
Antibacterial
Oily wastewater treatment
4-a595
13:4014:00G215Depth filter of polyhydroxyalkanoate and celluose fiber
depth filter
polyhydroxyalkanoate
cellulose fiber
4-b466
(14:00–14:40) (Chair: Mukai Yasuhito)
14:0014:20G216Pretreatment of high strength wastewater prior to ammoniacal nitrogen enrichment
wastewater
pretreatment
osmotically-assisted reverse osmosis
4-a558
14:2014:40G217Thermodynamic study on the aggregation/dispersion properties of PVDF blend membranes via NIPS process
molecular dynamics
poly(2-methoxyethyl acrylate)
ultrafiltration
4-a700
(15:00–16:00) (Chair: Nakamura Kazuho)
15:0015:20G219Development of nanofiltration membranes for organic/salt separation
Nanofiltration membrane
Organic/salt separation
Wastewater treatment
4-a320
15:2015:40G220Concentration and fractionation properties of nanocolloids by combining nanofiber membrane with electric field filter
electric field
nanofiber
filtration
4-a722
15:4016:00G221Synthesis and characterization of metal-organic framework (MOF) membrane for CO2 separation
metal-organic framework
membrane
CO2
4-a25
(16:00–17:00) (Chair: Matsuoka Atsushi)
16:0016:20G222Separation of H2O/H2 through ionic liquid-modified ZSM-5 zeolite membrane
ZSM-5 zeolite membrane
ionic liquid modification
vapor permeation
4-a184
16:2016:40G223Power requirement and membrane area on the bi-objective optimization of CO2 membrane separation process
CCUS
Bi-objective optimization
CO2 emissions
4-a186
16:4017:00G224Effect of operation conditions on CO2 adsorption over zeolite 13X at low CO2 concentration
zeolite 13X
adsorption
CO2
4-e489
Hall H(B3 2F 208)
7. Biochemical engineering
(9:00–10:20) (Chair: Sakono Masafumi, Takahara Mari)
9:009:20H201Release behavior of 1-methylcyclopropene (1-MCP) from 1-MCP included α-cyclodextrin (α-CD) coated paper
1-methylcyclopropenen
release
cyclodextrin
7-h179
9:209:40H202Development and Applications of Sanitation Management Technologies and Freshness Preservation Technologies in the Food Industry
Food Industry
Sanitation Management Technologies
Freshness Preservation Technologies
7-h9
9:4010:00H203Detection of fish meat degradation indicator substances using the reduction current of ferrocenium groups introduced into molecularly imprinted polymers
molecular imprinting
histamine
hypoxanthine
7-h299
10:0010:20H204Bioactive peptide binding to bile acids working in intestinal tract
Bioactive peptide
Bile acid
Micelle disruption
7-h188
(10:40–12:00) (Chair: Honda Hiroyuki, Yoshii Hidefumi)
10:4011:00H206Artificial lipidation of proteins to control membrane dynamics and detailed analysis
Protein
Lipidation
Lipid domain
7-b471
11:0011:20H207Development of DNA-binding proteins with strict sequence recognition for accurate gene editing.
DNA-binding protein
TALE
KRAS
7-b545
11:2011:40H208Enhancement of bio-alka(e)nes production by Escherichia coli expressing engineered acyl-ACP reductases with N-terminal tags
Bio-alka(e)nes
acyl carrier protein (ACP) reductase (AAR)
C-terminal tags
7-b539
11:4012:00H209Design of polysaccharide/polyadenine complex for drug delivery
Schizophyllan
Polyadenine
Drug delivery
7-b248
(13:00–14:00) (Chair: Kamihira Masamichi)
13:0013:20H213[The SCEJ Award for Outstanding Research Achievement] Chemical engineering-based development of new biomedical materials and their applications to advanced disease treatments
The SCEJ Award for Outstanding Research Achievement
0-b742
13:2013:40H214[The SCEJ Award for Outstanding Research Achievement] Study on the peptide-based functional low-molecular-weight gelators and their novel physiological activities.
The SCEJ Award for Outstanding Research Achievement
0-b744
13:4014:00H215[The SCEJ Award for Outstanding Young Researcher] Development of metabolic engineering technology for the production of valuable chemicals
The SCEJ Award for Outstanding Young Researcher
0-c746
(14:00–15:00) (Chair: Yoshimi Yasuo, Tamura Kenji)
14:0014:20H216Development of an Applicator to Disperse Powder for Esophageal Stricture Prevention after Endoscopic Submucosal Dissection
Endoscopic submucosal dissection
Powder dispersion
CFD simulation
7-e68
14:2014:40H217Development of heterodimer-type artificial receptors
artificial receptor
heterodimer
signal transduction
7-e70
14:4015:00H218Creation of a transdermal malaria vaccine and verification of effectiveness
Transdermal delivery
Vaccine
Immunology
7-e557
(15:00–16:00) (Chair: Kawahara Masahiro, Fujiyabu Takeshi)
15:0015:20H219Understanding the stability of features for AI cardiotoxicity prediction models using in vitro cardiomyocyte beating data.
cardiotoxicity
iPS-derived cardiomyocytes
Machine learning
7-e195
15:2015:40H220Development of a fibrous scaffold based on ECM-modeled material for liver tissue engineering
ECM-modeled material
Fibrous scaffold
Liver tissue engineering
7-e520
15:4016:00H221An approach for enhancing hepatic differentiation of iPS cells using hollow fiber culture.
iPS cells
stem cell differentiation
three-dimensional culture
7-e509
(16:00–17:00) (Chair: Ikegami Yasuhiro, Tanaka Kenjiro)
16:0016:20H222Development of a novel in vitro liver culture device for continuous bile recovery
Drug development
Bile analysis
Microfluoidics
7-e341
16:2016:40H223Development of 3D bioprinting method involving gelation induced by chemicals supplied from support material alternately extruded with ink
3D bioprinting
Support material
Hydrogel
7-e294
16:4017:00H2243D bioprinting of sugar beet pectin obtained through horseradish peroxidase-catalyzed crosslinking
3D Bioprinting
Hydrogels
Sugar Beet Pectin
7-e567
Hall I(B3 2F 202)
2. Fluid & particle processing
(9:00–10:00) (Chair: Togashi Kenichi, Nagatsu Yuichiro)
9:009:20I201Analysis of Etching and Flow Dynamics on a Substrate by Sprays
CFD
Wet Etching
Spray
2-a392
9:209:40I202Numerical investigation on influence of ultrasonic frequency on the rectified diffusion of acoustic cavitation
rectified diffusion
numerical simulation
acoustic cavitation
2-a431
9:4010:00I203Characteristics of flow and heat transfer in conical Taylor vortex flow
Conical Taylor-Couette flow
Heat transfer
Numerical simulation
2-a639
(10:00–11:00) (Chair: Yamamoto Takuya, Yokota Ryohsuke)
10:0010:20I204The evaluation of laminar mixing with a local fractal dimension distribution in an oscillatory baffled reactor
Laminar mixing
Poincare map
Fractal dimension
2-a326
10:2010:40I205Free-energy lattice Boltzmann model for ternary fluid flows with wetting
Lattice Boltzmann method
Ternary fluid
Wetting
2-a726
10:4011:00I206[Featured presentation] State identification of single-component gas-liquid two-phase jet by thermodynamic model and visualization experiment
first law of thermodynamics
gas-liquid phase change
visualization
2-a607
(11:00–12:00) (Chair: Mino Yasushi, Masuda Hayato)
11:0011:20I207Investigation of ice sublimation and heat transfer characteristics by radiation heating during freeze-drying
freeze-drying
heat transfer
sublimation
2-a108
11:2011:40I208Opposite effects of a reaction-driven viscosity decrease on miscible viscous fingering depending on the injection flow rate
Viscous fingering
Reacting flow
numerical simulation
2-a697
11:4012:00I209Application of consistent mass-momentum scheme for two-phase flow to dam break problem
consistent scheme
two-phase flow
VOF
2-e33
(13:00–14:00) (Chair: Ohta Mitsuhiro, Ishigami Toru)
13:0013:20I213Relationship between thermodynamic entropy and permutation entropy characterizing pseudo-two-dimensional turbulence
permutation entropy
entropy production
Viscous Fingering
2-e56
13:2013:40I214Verification Study of CFD Prediction Accuracy of Two-phase Flow Induced Fluid Force Fluctuations for Evaluating Flow Induced Vibration
Flow Induced Vibration
Two Phase Flow
Piping Bend
2-e305
13:4014:00I215Numerical Analysis on Motion of Charged Particle in Human Lung
CFD
DEM
Aerosol
2-e342
(14:00–15:00) (Chair: Ban Takahiko, Qian Shaoxiang)
14:0014:20I216[Featured presentation] Numerical analysis of conditions for detachment of oil droplet from wall surface by microbubble
Microbubble
Degreasing
Numerical simulation
2-e49
14:2014:40I217Surface modification of fine bubbles using molecular film coating
fine bubble
micro bubble
surface modification
2-e708
14:4015:00I218Numerical simulations of drop breakup in strong linear shear flow with a moving top wall and a stationary bottom wall
Drop breakup
Shear flow
Numerical analysis
2-e460
(15:00–16:00) (Chair: Goto Susumu, Misumi Ryuta)
15:0015:20I219Collision and mixing phenomena of two Leidenfrost droplets
Leidenfrost droplet
Mixing
Droplet reactor
2-e540
15:2015:40I220Numerical simulation of droplet behavior in a steady flow.
droplet deformation
multiphase flow
numerical simulation
2-b712
15:4016:00I221Flow and mixing ability in a rotating cylindrical container with liquid-gas interface
Liquid-gas interface
Numerical simulation
Mixing
2-b646
(16:00–17:00) (Chair: Kato Yoshihito, Murozono Koji)
16:0016:20I222Mixing with variable shear rates by using a precessing container
Mixing
Shear rates
Precession
2-b664
16:2016:40I223Simulation of Stirring in a Bioreactor using the Lattice Boltzmann Method
Computational Fluid Dynamics
Lattice Boltzmann Method
Stirring
2-b126
16:4017:00I224Method for predicting the size of transition metal complex hydroxides precipitated in a stirred-tank semi-batch reaction crystallizer using CFD and particle agglomeration models
turbulent mixing
precipitation
agglomeration model
2-b666
Hall J(B3 2F 203)
12,14 Materials engineering & interfacial phenomena,Wide area
(9:00–10:00) (Chair: Maruyama Tatsuo)
9:009:20J201Visualization and Numerical analysis of Leveling phenomena for Wire-Bar Coating
Bar Coating
Leveling
Visualization
12-h21
9:209:40J202Rotation of wires in drying suspensions to visualize compressional kinetics of colloidal particles
Drying colloidal suspensions
rotation of wires
packing of particles
12-h81
9:4010:00J203Drying kinetics of mixture suspensions containing colloidal particles and dissolved molecules
drying
colloidal particles
dissolved solutes
12-h603
(10:00–11:00) (Chair: Inasawa Susumu)
10:0010:20J204Rheological properties of slurry in microfluidic channels: A direct numerical simulation analysis
(PIA) *(Reg)Tatsumi R., (Reg)Koike O., (Reg)Yamaguchi Y., (Reg)Yoshie K., (UTokyo) (Reg)Tsuji Y.
Suspension
Rheology
Numerical simulation
12-h528
10:2010:40J205Uniformly sized microgels formed by water/water phase separation
aqueous two-phase system
uniformly sized microgels
water/water phase separation
12-i167
10:4011:00J206Molecular aggregates specifically inhibit DNase I.
Aggregation
Inhibitor
Enzyme
12-i435
(11:00–11:40) (Chair: Tatsumi Rei)
11:0011:20J207Light scattering effects on photo-thermal CO2 desorption in silica/carbon aerogel
aerogel
photo-thermal CO2 desorption
direct air capture
12-i527
11:2011:40J208Potential influential factors on reliability of perceived temporal seriality in naked-eye observation of quasi-visible fast flow
perceived temporal seriality
naked-eye observation
quasi-visible fast flow
12-k504
13. Environmental engineering
(13:20–14:20) (Chair: Kusakabe Katsuki)
13:2013:40J214Characterization of waste foundry sands (WFS) and its water-washing behavior collected from a factory in Tamil Nadu, India
waste foundry sands
washing by water
recycling
13-e230
13:4014:00J215Synthesis of N-doped carbon materials using deposited coke on zeolites after catalytic cracking of polymer and their ORR activity
zeolite
coke
oxygen reduction reaction
13-e360
14:0014:20J216Direct conversion of Fe(II)-supported lignin to graphene-based materials
lignin
recycle
graphene
13-e454
(14:20–15:00) (Chair: Matsuno Yasunari)
14:2014:40J217Technoeconomic analysis of polypropylene solvent recycling routes for circularity
Circular Economy
Plastic Recycling
Process Modeling
13-e506
14:4015:00J218Analysis of the effect of dissolution of generated NOx on metal dissolution reaction with nitric acid
Nitrogen oxides
Nitric acid
Metal dissolution
13-e553
(15:00–15:40) (Chair: Kurosawa Atsushi)
15:0015:40J219[Divisional Award] Investigation of optimal heating conditions for chloride volatilization of zinc and lead using chlorine containing plastics
PVC
Recycling
Chloride volatilization
13-e753
(16:00–17:00) (Chair: Yajima Tomoyuki, Shoji Tadashi)
16:0016:20J222Effect verification of new CCS amine emission control under plant operation conditions
(Toshiba Energy Systems & Solutions) *(Cor)Muraoka Daigo, (Cor)Fujita Koshito, (Cor)Kitamura Hideo, (Cor)Muramatsu Takehiko
CCUS
amine emission control
demonstration plant
13-g22
16:2016:40J223Development of synthetic fuel production technology to achieve carbon neutrality
CO2 utilization
Synthetic fuel
13-g50
16:4017:00J224Development of High-Efficiency CO2 Conversion Technology for Formic Acid Production
CO2 conversion
Formic acid
Catalyst
13-g214
Hall K(B3 2F 204)
6. Systems, information, and simulation technologies
(13:20–14:00) (Chair: Sugiyama Hirokazu, Morishita Tetsunori)
13:2013:40K214Improved accuracy of MSPC through optimization of scaling factor of multivariable independent of domain knowledge.
Pharmaceutical Continuous Manufacturing
Wet Granulation
Multivariate Statistical Process Control
6-f239
13:4014:00K215A parameter estimation method for chromatographic separation process based on physics-informed neural network
parameter estimation
chromatographic process
physics-informed neural network
6-f44
(14:00–14:40) (Chair: Hara Nobuo, Oishi Takuya)
14:0014:20K216Model-based design framework for antibody drug production processes considering perspectives from cell characteristics to social requirements
(UTokyo) *(Stu)Okamura K., (Int)Badr S., (Reg)Sugiyama H.
Biopharmaceuticals
Process design
IDEF0
6-g92
14:2014:40K217Coarse-Grained Force Field Parametrization for Polymers Using Machine Learning
Coarse-Grained Force Field
Machine Learning
6-g220
11. Electronics
(16:00–16:40) (Chair: Saito Takeyasu, Tomono Kazuaki)
16:0016:20K222Relation between electrode slurry and battery performance for all solid-state batteries
All solid-state batteries
11-a396
16:2016:40K223Study on the pH of electrolyte and anion adsorption in ethanol electro-oxidation reaction
Ethanol electro-oxidation
Hydrogen generation
Electrolyte
11-a684
Hall P(Conf. Hall)
PS-B Poster Session B (Fundamental prop., SIS, Energy eng., Thermal eng., Environment)
(09:20–11:20) (Chair: Kim Sanghong)
09:2011:20PB201Efficient simulation of the nematic-isotropic phase transition and discussion of thermodynamic stability
Liquid crystal
Molecular simulation
Free energy
1-a178
PB202Viscosity Measurement of CO2/Organic Solvent/Polymer Ternary Solutions for CO2 Painting Method and Viscosity Prediction Based on HSP Theory.
CO2 Painting
Viscosity
Polymer Solution
1-a255
PB203An assessment study of statistical thermodynamics calculation for designing gas absorption polymer
polymer
materials informatics
statistical thermodynamics calculation
1-a432
PB204[Featured presentation] Measurements and Correlation of Diffusivities for Zirconium Acetylacetonate in Pressurized Fluids
diffusivity
zirconium acetylacetonate
correrlation
1-a656
PB205Development of equipment that expands the performance of probe-type dissolved oxygen meters
liquid oxygen
oxygen measurement
liquid material
1-a477
PB206Exploring the Impact of Molecular Models in Large-Scale Materials Exploration: Atomic-Level Understanding from Screening Processes
Metal-organic frameworks
Molecular models
Molecular simulations
1-e336
PB207Estimation of vapor-liquid equilibrium for CO2 conversion process over a wide range of temperature
CO2 conversion
wide range of temperature
vapor-liquid equilibrium prediction
1-a525
PB208Measurement and prediction of solubility and diffusion coefficients of propylene in polypropylene
Solubility
Diffusion coefficient
Monomer
1-a584
PB209Solution Structure Study of ChCl-based Deep Eutectic Solvents with Excellent CO2 Absorption by Molecular Dynamics Simulation
CO2 absorption
Deep Eutectic Solvents
Molecular Dynamics
1-a724
PB210Effect of magnetic field on the dispersion state of high thermal conductive filler in polymer solution
highly thermally conductive filler
magnetic field treatment
polymer solution
1-b86
PB211Integrating Reverse Monte Carlo with Rietveld Refinement for Structural Characterization of Metal-Organic Frameworks
Metal organic framework
X-ray Diffraction
Reverse Monte Carlo
1-e687
PB212Prediction of Drug Solubility in Polymer with COSMO-SAC model
COSMO-SAC
amorphous solid dispersion
thermodynamic equilibrium
1-a298
PB213Identification Method of Sequential Alarms in Noisy Plant Operation Data for Logical Alarm Processing
Alarm System
Logical Processing
Sequential Alarm
6-a543
PB214Construction of machine learning models to predict the dielectric constant of epoxy resin and design of monomer structures to achieve low dielectric constant
Epoxy Resin
Materials Infomatics
Dielectric Constant
6-b55
PB215Computer-aided design of cryoprotective agents for stem cells
cryopreservation
molecular design
regenerative medicine
6-b229
PB216Synthesis of Thermally Coupled Distillation Systems: A Comprehensive Analysis and Optimization
Process synthesis
Distillation
Mixed-integer nonlinear programming
6-b284
PB217Modeling and design of ultrasound-assisted decontamination processes in pharmaceutical manufacturing
CFD
acoustic streaming
biopharmaceuticals
6-b291
PB218[Featured presentation] A Multi-timescale Data-driven Reduced Order Model for Fast Predictive Eulerian- Lagrangian Simulations
DEM-CFD
Data-driven Multi-timescale ROM
Fast Eulerian-Lagrangian simulations
6-c27
PB219Application of Process Design Method by Unified Modeling to Non-Isothermal Reaction Systems
Process Design
Superstructure
Optimization
6-e129
PB220Investigation of the applicability of quantum annealing optimization to combinatorial chemical process synthesis
Quantum computing
Membrane
Optimization
6-e237
PB221Real time monitoring of polymer properties and design of polymerization process with machine learning
machine learning
polymer
Online sensing
6-d66
PB222Modeling and multi-criteria assessment of purification processes for monoclonal antibody production
Multi-criteria assessment
Monoclonal antibody production
Purification process
6-g587
PB223An approach to process synthesis and optimization using QUBO surrogate function : toward the application of Quantum Annealing Machines
Quantum computing
Blackbox optimization
Surrogate function
6-e651
PB224PFD-Guided Graph Convolutional Networks for Soft Sensor Modeling in Chemical Process
soft sensor
P&ID
Graph Convolutional Networks
6-f614
PB225Exploration for the optimal design parameters of stirred tank through multi-objective optimization
Multi-objective optimization
Stirred tank
CFD simulation
6-e620
PB226Vapor pressure prediction of amines using molecular descriptors
Machine Learning
Physical Property Prediction
amine
6-g12
PB227Study on Solvent Circulation in Direct Liquefaction of Woody Biomass with Mixed Solvents
Solvent Circulation
Direct Liquefaction
Mixed Solvents
9-e386
PB228Impact of Visible Light Irradiation on Hydrogen Production in Layered MnO2 Thin Films Incorporating Metal Complex Inserts
Hydrogen Production
MnO2
low potential
9-a405
PB229Direct urea synthesis by electrolysis from N2 and carbonate solution
Urea synthesis
CO2 utilization
CO2 electrolysis
9-c282
PB230Evaluation and Analysis of High Temperature Adhesion of CaCO3-CaO Particles
Calcium
Agglomeration
Combustion
9-c443
PB231Structural Stability and Reaction Kinetic Analysis of Calcium Ferrite as an Oxygen Carrier in Chemical Looping Combustion
Chemical Looping Combustion
Calcium Ferrite
CO2 Separation
9-c457
PB232Evaluation of Effects of Ammonia Combustion Flue Gas on Heat Storages and Objects to be Heated
ammonia
exhaust gas
3-b610
PB233Use of a swirling flow to continuously produce hydrogen in methane decomposition
swirling flow reactor
hydrogen production
methane decomposition
9-a322
PB234Tar removal by a filter
biomass tar
filter
9-c582
PB235Improvement of H2 absorption/desorption cycling stability of MgH2 by compositing with carbon materials
MgH2
Hydrogen storage
Carbon materials
9-e174
PB236Study on Polar Solvent Species in Direct Liquefaction of Woody Biomass Using Mix Solvent
woody biomass
direct liquefaction
polar solvent
9-e387
PB237Evaluation of the relationship between pore structure and strength of lignite coke
coke structure
coke strength
FEM
9-c458
PB238Effect of structural composition on the higher heating value of sorghum
Klason lignin
Ash content
Herbaceous biomass
9-c670
PB239Proposal for inter-industrial carbon value chain utilizing blast furnaces
Carbon Value Chain
Pressure Swing Adsorption Technology
SEG process
9-c659
PB240Effect of Aluminum on Phosphorus-derived Deposition in Biomass Combustion
biomass
combustion
phosphorus
9-d436
PB241Research on the adsorption / desorption kinetics of Carbon Molecular Sieve under the TSA conditions
Temperature Swing Adsorption
Carbon Molecular Sieve
Volumetric Method
9-d563
PB242Coating of Carbon Nanotubes with Boron Nitride for Application to Lithium-Ion Batteries
boron nitride
carbon nanotube
lithium-ion battery
9-e561
PB243Numerical simulation of gas-liquid counter flow in a packed bed of amine absorbent
carbon neutral
numerical simulation
amine absorbent
9-e130
PB244Structural control and performance analysis of carbon-free catalyst layers towards higher power-output PEFCs
Polymer electrolyte fuel cell
Carbon free catalyst layers
Structual control
9-e404
PB245Ammonia electrolysis in aqueous solution for hydrogen production using Ir supported carbon nanotube film electrode
Hydrogen production
Aqueous ammonia
Catalytic electrode
9-e374
PB246Liquid ammonia electrolysis for hydrogen production using Ru-supported carbon nanotube film electrodes
Carbon nanotube
Ammonia electrolysis
Ru nanoparticles
9-e226
PB247Transient simulation of temperature distribution in a CO2 sublimation tank
heat transfer
numerical simulation
low temperature
9-e272
PB248Different functional groups cross-linked graphene oxide membranes for proton exchange membrane fuel cell
(Gunma U.) *(Stu)Liu J., (Reg)Ishitobi H., (Reg)Nakagawa N.
Graphene oxide
decrease swelling ratio
excellent conductivity
9-e372
PB249Evaluation of Gas-Solid Contact Efficiency Using Cold Models for a Gasifier of New Horizontally Rotating Cylinder
rotary kiln
gasifier
gas-solid contact efficiency
9-e397
PB250Impact of fluctuations in heat and electricity demand on the economics of building-scale distributed hydrogen energy storage systems
microgrid
hydrogen
renewable energy
9-e680
PB251Numerical simulation of fluid flow and heat transfer in a single-tube sublimation tank
numerical simulation
heat transfer
low temperature
9-e173
PB252An electronical catalyst with porous structure prepared by carbon nanofibers for methanol oxidation reaction: characterization and performance
Methanol Oxidation Reaction (MOR)
Electrode Catalyst
Porous Carbon Nanofibers
9-e723
PB253Production of biodiesel fuel derived from animal fats by decarboxylation method using Ni supported catalyst
decarboxylation
biodiesel
animal fats
9-e424
PB254Selectivity control of anode reaction on seawater electrolysis for hydrogen generation using thin flow channel electrolysis cell.
Seawater electrolysis
Chlorine
Oxygen selectivity
9-e423
PB255High-performance anion exchange membrane water electrolysis by controlling the interfaces of porous nickel anode catalysts and membranes
Hydrogen production
Anion exchange membrane water electrolysis
Porous nickel catalyst
9-e580
PB256Development of High-Temperature Ammonia Storage Materials Using Zeolites
Ammonia
Adsorption
Zeolite
9-f221
PB261Effects of Substrate Moisture Content on Up-flow Dry Anaerobic Digestion
(TUAT) *(Stu)Fujii K., Kuroiwa M., (Reg)Terada A., (Reg)Riya S.
Anaerobic Digestion
Biomass energy
Moisture Content
13-a402
PB262Sol-Gel Synthesis of Titania-Supported Transition Metal Catalysts and their Application to Hydrothermal Oxidation Process
hydrothermal oxidation process
sol-gel method
fenton reaction
13-b205
PB263Comparison of Batch Hydrogen Fermentation and Continuous Hydrogen Fermentation with Waste Molasses
Hydrogen Fermentation
Continuous test
13-b353
PB264Effects of biofilm scouring intensity on organic carbon and nitrogen removal performance of a membrane-aerated biofilm reactor
MABR
scouring
nitrogen removal
13-b581
PB265Oil-Water Separation by Used Reverse Osmosis Membranes and Evaluation of Treatment Performance
Used Reverse Osmosis Membranes
Waste Utilization
Oil-Water Separation
13-b706
PB266Machine Learning approach for predicting hydrogen production from water electrolysis
Hydrogen production
Electrolysis
Mashine Learning
13-a94
PB267Connecting the spatial information of adsorption sites in Metal-organic Frameworks with their water adsorption properties
water adsorption
deep learning
molecular simulations
13-a327
PB268Preparation of cobalt aqua complex ion-imprinted silica particles and their possible application for remediation of tritium-contaminated water
Tritiated water
molecular imprinting
adhesive peptide
13-a433
PB269The leachability of fluorine from incineration ash depended on the chemical composition.
fluorine
incineration ash
13-c333
PB270Assessment of circulating plastic recycling segregating origin of carbon sources
Life cycle assessment
Carbon resource circulation
Process modeling
13-d446
PB271Adsorption characteristics of nutrients by biochar derived from dry methane fermentation residue and eggshell
nutrients
biochar
adsorption
13-d551
PB272Real-time monitoring of CO2absorption in CO2-absorbing concrete in the flow reactor
CO2-absorbing concrete
Carbon neutral
Carbonation
13-g358
PB273Process simulation of hydrothermal synthesis of formate integrated with CO2 capture using alkali carbonate absorbents
CCU
Aspen plus
Potassium carbonate
13-g619
PB274Development and performance evaluation of chemical absorbents for CO2 capture by pressure-swing process with unused LNG cold energy
Chemical absorption
CO2 capture
Amine
13-g645
PB275Life Cycle Assessment and Economic Analysis of Sustainable Levulinic Acid Production Process from Biomass Waste
Biomass
Levulinic acid
Life cycle assessment
13-d611
PB276Leaching and recovery of gold by iodine-iodide solutions
Gold
iodine
iodide
13-e47
PB277Effect of moisture content on mixed anaerobic digestion of cattle manure and rice straw
anaerobic digestion
moisture content
protozoa
13-a694
PB278Influence of Hot-Air Temperature on Combined Infrared and Convective Drying Characteristics of All Biomass Wet-Extruded Board
wood powder composite
drying characteristics
biomass board
13-e253
PB279Chemical Recycling of Discarded Fishing Nets to Recover Polyamide 6 Monomers using Hydrothermal Method
Hydrothermal degradation
Polyamide 6
Fishing nets
13-e132
PB280Application of US-EC system oxidation PPCPs and using machine learning to predict hydraulic retention time in continuous processes
Machine learning
Sonoelectrochemical
Continuous stirred-tank reactor
13-b16
PB281Development of inorganic ion exchangers for waste treatment and decommissioning
ion exchange
radioactive waste
nuclear decommissioning
13-i674
PB282Ecological effect evaluation of ion exchangers
Daphnia
immobilization test
ion exchange
13-c676
PB283Elucidation of the sedimentation enhancement effect by applying a DC electric field to aqueous silica slurry
(Hosei U.) *(Stu)Koike F., Yabuki K., (Reg·PCEF)Kitamura K., (Reg)Mori T.
Separation
Sedimentation
Electrophoresis
13-e268
PB284Synthesis of MIL-53(Al) using aluminum dross as a raw material
(Toho U.) *(Stu)Masuda Yuki, (Reg·PCE)Konno Hiroki
MIL-53(Al)
Aluminum dross
Adsorption
13-e343
PB285Catalytic decomposition of polypropylene and polystyrene mixture in heavy gas oil
Chemical recycling
Zeolite
Hydrocarbon solvents
13-e412
PB286Prediction of CO2 desorption performance of amine-based absorbents in vacuum flash desorption using porous hollow fiber membranes
CO2 chemical absorption
CO2 stripping
machine learning
13-g690
PB287Environmental impact assessment of NMC lithium-ion battery recycling process using superstructure
Life cycle assessment
Hydrometallurgy
Pyrometallurgy
13-e677
PB288Hydrothermal treatment of PET/PE composite films for recycling process development
PET/PE composite films
Hydrothermal treatment
recycling process
13-e456
PB289Development of CO2 Conversion Technology for Formic Acid Production by Highly Efficient Hydrogeneration reaction
CO2 conversion
Formic acid
Catalyst
13-g240
PB290Environment-friendly fixation of carbon dioxide using biomaterials
Carbon dioxide
Epichlorohydrin
N-doped carbon
13-g524
PB291Integration of CO2 capture and biomethanation by membrane biofilm reactor
Membrane biofilm reactor
Biomethanation
CO2 capture
13-g691
Hall P(Conf. Hall)
PS-C Poster Session C (Supercritical, Materials & interfaces, Electronics)
(13:20–15:20) (Chair: Kanai Yugo)
13:2015:20PC201The characteristics of extracts in strawberry leaf extraction with supercritical carbon dioxide + water mixtures in relation to solubility parameter
supercritical carbon dioxide
strawberry leaf
extraction
8-c262
PC202Effect of polymer flocculation of diatom on lipid extraction with liquefied dimethyl ether.
microalgae
subcritical
renewable resource
8-c312
PC203Sunflower oil extraction using carbon dioxide expanded liquids
carbon dioxide expanded liquid
extraction
bio-oil
8-c512
PC204Continuous transfer hydrogenolysis of diphenyl ether using hot-compressed 2-propanol and Ni catalyst fixed bed reactor
lignin
base metal catalyst
flow reactor
8-d23
PC205Investigation of acid catalytic effect of alcohol in hot compressed water based on pinacol rearrangement
acid catalytic effect
hot compressed water
pinacol rearrangement
8-d51
PC206Solvothermal synthesis of RuO2-IrO2 porous spheres
solvothermal
nanoparticles
8-e75
PC207Preparation of liposomes by ultrasound-assisted method using mixtures of sub/supercritical carbon dioxide and dimethyl ether
(Nagoya U.) *(Stu)Onuma K., (Reg)Zhu L., (Reg)Wang T., (Reg)Yasuda K., (Reg)Yamamoto T., (Reg)Kanda H.
liposome
dimethyl ether
supercritical carbon dioxide
8-e135
PC208Effect of temperature on the hydrothermal decomposition of strawberry dead leaf
Strawberry dead leaf
Hydrothermal decomposition
Antioxidant capacity
8-d317
PC209Chemical recycling of general-purpose plastics using hydrothermal treatment
hydrothermal treatment
Liquefaction
Dechlorination
8-d244
PC210Effect of Association Term of PC-SAFT EOS on Predicting Drug Solubility in ScCO2
supercritical fluid
solubility prediction
association
8-b102
PC211Study of the Solvation Models for the Decarboxylation of Phthalic Acid in Supercritical Water
Solvation effect
Supercritical water
Quantum chemical calculation
8-d571
PC212Generation of fossil fuel alternatives from marine biomass by hydrothermal treatment
hydrothermal treatment
marine biomass
kinetics analysis
8-d311
PC213Synthesis of core-shell type metal oxide porous spheres
core-shell
metal oxide
8-e76
PC214Formation of β-carotene nanoparticles using supercritical carbon dioxide antisolvent process assisted by injection of liquefied dimethyl ether solution
(Nagoya U.) *(Stu)Mei L., (Reg)Zhu L., (Reg)Wang T., (Reg)Yamamoto T., (Reg)Kanda H.
beta-carotene nanoparticle
supercritical carbon dioxide
liquefied dimethyl ether
8-e279
PC215[Featured presentation] Entrainer effect for high-concentrated synthesis of iron oxide nanoparticles using supercritical CO2 as medium
entrainer effect
supercritical CO2
iron oxide nanoparticles
8-d590
PC216Determination of Molecular Descriptor in Pharmaceutical Cocrystal Prediction
Molecular Descriptor
Machine learning
Cocrystal
8-b370
PC217Development of thermally-stable thermal interface material using thermosetting resin
Thermal interface material
Thermosetting resin
Thermal resistance
12-a330
PC218Influence of cholesterol on hydrogen bond dynamics of water molecules near bilayer lipid membranes
lipid bilayer
Hydrogen bond
Molecular Simulation
12-a476
PC219Effect of Branched Structure of Organic Ligands on the Dispersibility of Nanoparticles in Organic Solvents
Nanoparticles
Organic ligands
Dispersibility
12-a550
PC220Heat generation ability for fine Mg-type substitution ferrite particle in the AC magnetic field.
Hyperthermia
Magnetic Material
solvothermal
12-c124
PC221One-step fabrication of cross-linked millicapsules at high concentrations
drug delivery
millicapsules
gel
12-c203
PC222Development of non-precious metal sulfide catalysts for alkaline water electrolysis
alkaline water electrolysis
non-precious metal
oxygen evolution reaction
12-c689
PC223Preparation of Oxygen Carriers Using Silicone oil in Water Emulsion
Oxygen Carrier
Emulsion
Silicone Oil
12-b472
PC224Development of a highly efficient transdermal formulation of the diabetes drug insulin
Transdermal delivery
Insulin
Ionic liquid
12-b523
PC225Bulk and emulsion polymerization of water soluble p-hydroxy styrene
p-hydroxy styrene
bulk polymerization
emulsion polymerization
12-b636
PC226Effect of pH value on photocatalytic degradation of organic dyes in water using MIL-100(Fe)
(Toho U.) *(Stu)Sato Honoka, (Reg·PCE)Konno Hiroki
Metal-organic frameworks
Water treatment
Photocatalyst
12-c347
PC227Applicaiton of carbon nanohorn to hydrogen storage: Influence of N, B doping
Carbon nanohorn
Hydrogen Storage
12-c727
PC228Localization of organic dye molecules in a hollow-structured porous silica particle
hollow particle
mesoporous silica
adsorption
12-c369
PC229Solvothermal synthesis of MgFe2O4 powder having high heat generation property in the AC magnetic field.
Hyperthermia
solvothermal
Magnetic Material
12-c127
PC230Cost-effective Synthesis of CoP@N-doped Carbon for Electrochemical Hydrogen Evolution Reaction
HER
transition metal
electrocatalyst
12-c280
PC231Synthesis of MOFs-derived porous carbon and its adsorption properties in aqueous solution
(Toho U.) *(Stu)Sano Eisuke, (Reg·PCE)Konno Hiroki
Porous carbon
Metal-organic frameworks
Water treatment
12-c345
PC232Development of nanoemulsions to promote mucosal permeation using porous polymer particles
nanoemulsions
mucosal permeation
porous polymer particles
12-c654
PC233Free energy analysis of the fluorescent probe immersed in a lipid bilayer
lipid bilayer
fluorescent probe
free energy analysis
12-d20
PC234Molecular dynamics analysis of nanoparticle translocation across vesicle membrane
Molecular dynamics
Nanoparticle
Vesicle
12-d191
PC235Precise Antibody Modification of InP Quantum Dots for Quantitative Protein Labeling
InP quantum dot
Colloidal stability
Protein detection
12-d538
PC236Photocatalytic properties of fine magnetic iron oxide by solution combustion method
Photocatalyst
Magnetic Material
Solution combustion method
12-c266
PC237[No show] A Hybrid Semiconductor/Au SERS Substrate: Revealing Metabolic Fingerprints in Cellular Response
SERS substrate
nanoparticles
semiconductor
12-d497
PC238Relation between size, morphology, electrical properties, and the bipolarons/polarons ratio of PPy in the presence of SDS
polypyrrole
optical bandgap
bipolaron and polaron ratio
12-d437
PC239Size Control of Perylene Nanocrystals by Application of Reprecipitation Method
organic nanocrystal
reprecipitation method
micromixer
12-d206
PC240Surfactant-based recovery of fluorescent molecularly imprinted polymer nanoparticles for serotonin detection.
serotonin
nanoparticles
surfactant
12-d200
PC241Evaluation of the activity of ZnO-supported noble metal catalysts in the hydrogenation of p-Nitrophenol
Molten salt synthesis
Zn alloy
Hydrogenation reaction
12-d196
PC242Surface modification of nanosilica by silane coupling agents and evaluation of these dispersibility
nanosilica
silane coupling agent
dispersibility
12-d210
PC243Supercritical hydrothermal synthesis of Mg-Ga spinel nanoparticles with controlled stoichiometry
Supercritical hydrothermal synthesis
Nonstoichiometric nanoparticles
Spinel-type metal oxides
12-d192
PC244[No show] Stability-enhanced SERS Applications by size-controllable Cu Nanoparticles
Cu nanoparticle
Surface-Enhanced Raman Scattering
size-control
12-d480
PC245Polymer-Anchored Serotonin Immobilization on Glass Beads Surface for the Synthesis of Highly Selective Fluorescent Molecularly Imprinted Polymer Nanoparticles
Solid-phase synthesis
fMIP-NPs
Polymer-anchored immobilization
12-d283
PC246Room-temperature synthesis of Pd-Ru solid-solution alloy nanoparticles using microreactor and catalytic activity evaluation
Microreactor
Alloy nanoparticles
CO oxidation
12-d276
PC247Synthesis of highly bright red-light-emitting silicon quantum dots: PL mechanism explored by time-resolved spectroscopy
silicon quantum dot
photoluminescence
surface oxidation
12-d408
PC248Drug release properties of drug delivery nanoparticles based on calcium alginate in artificial digestive fluid
drug delivery system
alginate
nanoparticle
12-d568
PC249Acid-catalyzed synthesis of organosilica nanoparticles
Organo-Silica
Nanoparticle
Anionic Surfactant
12-d364
PC250Investigation of exfoliation and heat treatment process of Mg/Al double hydroxide for synthesis of high capacity CO2 adsorbent.
hydrotalcite
CO2adsorption
exfoliation
12-a629
PC251The effect of solid-state structures on the biodegradation rate of a marine degradable biopolymer
biodegradation
polymer
enzyme
12-j63
PC252Sustained drug release from alginate-based hydrogel for treatment of peritoneal dissemination of ovarian cancer
sustained drug release
alginate
peritoneal dissemination
12-j218
PC253Synthesis and electric characteristic evaluation of liquid crystalline polymer semiconductors with benzodithiophene site in the side chain
liquid crystals
benzodithiophene
liquid crystalline polymer semiconductors
12-j696
PC254Development of prey microcapsules using bivalve food recognition mechanism
bivalves
feed
capsule
12-e199
PC255Elucidation of reaction kinetics of enzyme-containing nanogels using nanofluidic devices toward the construction of transcendental molecular systems
nanofluidics
nanogel
enzyme
12-e379
PC256Water-repellent film laminated with only natural biodegradable materials and analysis of surface free energy
lotus effect
biodegradable film
surface free energy
12-e416
PC261Development of CO2 capture and utilization technology using dissolved Ca and Mg in seawater -Synthesis of carbonate by CO2/O2/N2 fine bubble injection into concentrated brine discharged from salt manufacturing process-
Carbon capture and utilization
Fine bubbles
Seawater
12-g201
PC262Relationship between classification characteristics and particle size distribution in the up-flow reaction crystallization of CaCO3
reaction crystallization
classification
calcium carbonate
12-g259
PC263The effect of the combination of the cooling mode and the ozone concentration on the crystal shape in cooling crystallization of glycine.
Crystallization
Ozonation
Tailor-made additives
12-g277
PC264Evaluation of the crystal growth rate in continuous crystallization using an oscillatory helical reactor
helical reactor
crystal growth rate
continuous crystallization
12-g426
PC265Physicochemical Evaluation of PEG-Modified Bicelles for Transdermal Delivery
Bicelles
Small Angle X-ray Scattering
Transdermal delivery
12-i513
PC266Stability evaluation of photo-thermal aerogel for Direct air capture in humid condition
aerogel
photo-thermal effect
CO2 desorption
12-i522
PC267Preparation of bicells using hydrothermal emulsification combined with solvent diffusion
bicell
hydrothermal emulsification
solvent diffusion
12-i601
PC268Adsorption performance of resorcinol-formaldehyde hydrogel beads as adsorbents for cesium ion in a packed-bed
resorcinol-formaldehyde hydrogel beads
cesium ion
adsorption
12-e703
PC269Effects of Stratum Corneum Water Contents on the Skin Penetration of Microemulsions Dispersed in Deep Eutectic Solvents
Microemulsion
Deep eutectic solvent
Stratum corneum
12-i505
PC270Investigation of reaction rate obtained from enzymatic oxidation of cationic model substrates in the presence of anionic vesicles
vesicle
enzymatic oxidation
reaction rate constant
12-k91
PC271Effect of particle surface roughness on shear thickening behavior of porous hollow silica particle suspension
silica particles
suspension
shear thickening
12-l496
PC272Investigation of reliability criterion for naked-eye observation of flowing objects by eye movement measurement
flowing objects
eye tracking
serial movement perception
12-k117
PC273Effect of raw material composition on texture of edible fiber containing plant-based protein
meat substitute
plant-based protein fiber
wet spinning
12-k600
PC274Development of PCL/Gelatin Wet Electrospun Fibers for Three-Dimensional Cell Culturing
Three-dimensional cell culture scaffold
wet electrospinning nanofiber
Morphological control
12-j414
PC275Studying the Nucleation and Growth of CH4/CO2 Mixed Hydrates using Computational Approaches
clathrate hydrate
crystallization
12-g658
PC276Change in the internal structure of inkjet inks during the drying process
Viscoelasticity
Drying process
Inkjet ink
12-l122
PC277Synthesis and characterisation of in vivo imaging fluorescent silica nanoparticles
silica nanoparticles
fluorescent labeling material
cytotoxicity test
12-d54
PC278[No show] Enhancing Optical Properties by Introducing Single Dopants and Co-Dopants in G-C3N4
G-C3N4
element doped
optical properties
12-k665
PC279Orientation control of magnesium-assisted triblock polymer/resorcinol composite in AC electric field
Liquid Cryistal
Orientation Control
AC electric field
12-a507
PC280Low-damage dispersion of boron nitride nanotubes and fabrication of transparent self-supporting thin films
Boron nitride nanotubes
Dispersion
Thin film
12-k260
PC281Effect of affinity on the structure of surface-modified nanoparticles/polymer nanocomposites during melt mixing
(Tohoku U.) *(Stu·PCEF)Inoue S., (Stu·PCEF)Saito T., (Reg)Kubo M., (Tohoku U. NICHe) (Reg)Tsukada T.
polymer nanocomposites
melt mixing
dispersion
12-k385
PC282Development of a pressure-driven biosensor using nano-scaled membrane pores for molecular recognition
Biosensor
signal amplification
point-of-care testing
12-m281
PC283Infection control of gray mold fungus using penthiopyrad fine particles
Pesticides
Botrytis cinerea
Plant
12-m58
PC284Analysis of the flow behavior of toroidal hydrogel particles by fluid-structure interaction
computational fluid dynamics
fluid-structure interaction
hydrogel
12-m120
PC285Influence of Capacitor Electrode Performance on Interlayer Metal Complex Variations in Layered Manganese Oxides
MnO2
Capacitor
metal complex
11-a616
PC286Effect of Temperature on Aggregation and Dispersion Mechanism of Organically Modified Nanoparticles: Coarse-Grained Molecular Dynamics Simulations
Coarse-Grained Molecular Dynamics Simulation
Organically Modified Nanoparticles
Aggregation and Dispersion
12-d103
PC287Improvement of drug loading capacity into metal-organic frameworks by electric field application
Metal-organic framework
Drug delivery system
Electric field
12-a301
PC288Development of porous non-precious metal catalysts based on the control of surface structures using electrodeposition for anion exchange membrane water electrolyzer
Electrocatalyst
Electrodeposition
Anion Exchenge Membrane Water Electrolyzer
12-i577
PC289Enhanced performance of metal-free carbon-based oxygen reduction reaction catalysts through controlling active site location
Oxygen Reduction Reaction (ORR)
Nitrogen-doped Carbon
11-a90
PC290Enhanced Capacity and Development of Anion-Driven Batteries Utilizing Visible Light-Responsive Layered Manganese Oxide as Cathode Material
Layered MnO2
anionic drive
light irradiation
11-a219
Hall T(B1 2F 230)
SP-3 [Special Symposium]
Perspectives of Startups based in Chemical Engineering
(13:00–13:20)
13:0013:20Opening address
(Shinshu U.) (Reg)Koyama Michihisa
(13:20–14:30) (Chair: Inoue Gen)
13:2013:50T214[Invited lecture] Overseas Expansion and Support Cases in Deep Tech Startups
organic
energy
startup
SP-3490
13:5014:10T215[Invited lecture] Planet Savers Inc. and Challenge toward Direct Air Capture
open innovation
startup
SP-3492
14:1014:30T216[Invited lecture] Battery Innovation with New Carbon Materials
carbon
graphene
startup
SP-3488
14:3014:50Break
(14:50–16:00) (Chair: Nomura Takahiro)
14:5015:20T219[Invited lecture] Toward the Industrialization of Technology Seeds: Specializing in supporting the launch of university-initiated ventures and the commercialization of research within companies
matching platform
R&D human resources
startup
SP-3491
15:2015:40T220[Invited lecture] Social Implementation of Perovskite Solar Cells: The Challenge of Enecoat Technologies
perovskite
kyoto
startup
SP-3487
15:4016:00T221[Invited lecture] TBA
radiational cooling
zero-energy
startup
SP-3494
(16:00–17:00) (Chair: Matsuda Keigo)
16:0017:00Discussion and networking
DispCtl: Preferences

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 89th Annual Meeting (Sakai, 2024)


© 2024 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact Organizing Committee of SCEJ 89th Annual Meeting
E-mail: inquiry-89awww4.scej.org