Hall A | |||||
---|---|---|---|---|---|
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Cutting Edge of Biochemical Engineering (Poster Session with Flash Presentation)> | |||||
(9:00–10:00) ( Shimanouchi T.) | |||||
A201 | Growth Characteristic of photosynthesized Microorganism in a Taylor-Couette Vortex Flow Bio Reactor | Taylor-couette vortex flow Bioreactor Mixing | S-6 | 200 | |
=A201 | Novel 3D neuronal culture technology combined ECM-mimetic material with thin-layer gel system | in situ observation neural ECM-mimetic material neural stem cell | S-6 | 555 | |
==A201 | Effects of temperature on the growth and astaxanthin production of Haematococcus pluvialis | photobioreactor Haematococcus pluvialis astaxanthin | S-6 | 568 | |
===A201 | Single cell culture array of cyanobacteria using magnetic particles | cyanobacteria cell culture array magnetic particles | S-6 | 601 | |
====A201 | Microbial production of astaxanthin using corn cob hydrolyzate containing xylose and glucose | Corn cobs Astaxanthin Xanthophyllomyces dendrorhous | S-6 | 620 | |
=====A201 | Low cost production of concentrated xylitol from corn cob hydrolysates by Candida magnoliae | corn cobs xylitol candida magnoliae | S-6 | 709 | |
======A201 | (withdrawn) | 100 | 721 | ||
=======A201 | Organic solvent tolerance of bacteria estimated by dilution with low cytotoxic organic solvent. | organic solvent tolerance bacteria logP | S-6 | 725 | |
========A201 | Adsorption of imidazole peptide from chicken extract using Immobilized Metal Affinity Chromatography | IMAC adsorption carnosine | S-6 | 910 | |
=========A201 | Study of the efficient phosphoric acid eluting condition from poultry manure | Poultry manure Phosphoric acid Elution | S-6 | 732 | |
A202 | On a synergistic effect in enzymatic degradation of cellulosic biomass | cellulosic biomass hemicellulase synergism | S-6 | 464 | |
=A202 | Effect of substrate on cellulase activity of cellulase-producing fungi | Trichoderma reesei cellulase cellulose | S-6 | 745 | |
==A202 | Production of p-hydroxystyrene using Streptomyces lividans | Streptomyces lividans p-Hydroxystyrene fdc1 | S-6 | 752 | |
===A202 | p-Hydroxycinnamic acid production directly from cellulose using Streptomyces lividans. | Cellulose Streptomyces p-hydroxycinnamic acid | S-6 | 878 | |
====A202 | Improving water-dispersibility for curcumin utilizing inclusion property of casein in skim milk | curcumin skim milk solbility | S-6 | 911 | |
=====A202 | Enhancement of stability of a haloperoxidase by directed evolution | directed evolution haloperoxidase stability | S-6 | 916 | |
======A202 | L-Lysine production from cellobiose using Cornebacterium glutamicum displaying ¦Â-glucosidase on its cell surface | Corynebacterium glutamicum L-lysine cellobiose | S-6 | 948 | |
=======A202 | Control of porous structure of PMMA membrane | PMMA porous membrane structure | S-6 | 146 | |
========A202 | Composite materials of PLLA porous membrane and enzymatically polymerized phenol derivatives | porous membrane poly(L-lactic acid) enzymatic oxidative polymerization | S-6 | 148 | |
=========A202 | Hepatic differentiation of pluripotent stem cells using hollow fiber organoid culture method | Hollow fiber Hepatic differentiation Stem cell | S-6 | 379 | |
A203 | In vitro hematopoietic differentiation of pluripotent stem cells induced by organoid formation inside hollow fibers | hematopoietic differentiation hollow fiber stem cell | S-6 | 499 | |
=A203 | Characterization of E. coli internal proteins adsorbed onto the polymer film surfaces | proteome analysis protein adsorption polymer film | S-6 | 693 | |
==A203 | Analysis of Dynamic Behaviors of Chiral Recognition by Liposome Membrane | Membranome Chiral recognition Liposome membrane | S-6 | 712 | |
===A203 | Formation of supramolecular gel by peptide amphiphile and its functions | Supramolecular gel Oil-in-Water Emulsion Transdermal delivery | S-6 | 714 | |
====A203 | Regulation of Redox Reaction of TCA Cycle-Related Enzymes by Surface Designed-Liposomes | Membranome TCA cycle Redox reaction | S-6 | 727 | |
=====A203 | Adsorption characteristics of proteins genetically-fused with SiN-binding peptides | peptide-tag immobilization biosensor | S-6 | 771 | |
======A203 | Temperature effect in ion-exchange chromatography of proteins | chromatography distribution coefficient Diffusion coefficient | S-6 | 777 | |
=======A203 | Passage operation of human skeletal muscle cells using hollow fiber membrane | passage human cell culture regenerative medicine | S-6 | 871 | |
========A203 | Bacterial immobilization based on the characteristics of adhesive cell surface protein | Immobilization Gram-negative bacteria Adhesion | S-6 | 37 | |
=========A203 | Peptide synthesis by immobilized enzyme in liquefied amino acid substrates | enzymatic peptide synthesis immobilized enzyme ionic liquid | S-6 | 350 | |
(10:00–11:00) ( Nakagawa K.) | |||||
A204 | Oriented immobilization of enzyme using sortase A-mediated transpeptidation | sortase A protein immobilization oriented immobilization | S-6 | 583 | |
=A204 | Immobilization of PMMA-Tag-Fused Fab and its application to the immunodiagnosis | Fab refolding immobilization | S-6 | 853 | |
==A204 | Characterization of enzymatically cross-linked poly(ethylene glycol) hydrogels | enzymatic cross-linking hydrogel poly(ethylene glycol) | S-6 | 261 | |
===A204 | Determination of enzyme concentration in Mechaelis-Menten type reaction. | enzyme kinetics enzyme concentration michaelis-menten type reaction | S-6 | 1006 | |
====A204 | Reactivity of lyophilized lipase including glass-forming saccharides | Lipase Saccharides Glass-forming | S-6 | 403 | |
=====A204 | Preparation and temperature-dependent membrane permeability of sphingomyelin vesicles | Sphingomyelin Liposomes Membrane permeability | S-6 | 109 | |
======A204 | Reversible clustering of mixed liposomes induced by calcium ions | Liposome clusters Calcium ion Membrane permeability | S-6 | 285 | |
=======A204 | Development of a transdermal asthma inhibitor using Solid-in-Oil nanodispersion | Drug Delivery Asthma inhibitor Solid-in-Oil nanodispersion | S-6 | 476 | |
========A204 | Development of efficient refolding method for PMMA-tag-fused scFv | scFv PMMA-tag refolding | S-6 | 585 | |
=========A204 | Development of effective cancer immunotherapy by using oil-based nano dispersion | transcutaneous immunization cancer vaccine nano dispersion | S-6 | 610 | |
A205 | Molecular design of an artificial cellulosome by conjugating different types of cellulases onto DNA scaffold. | cellulosic biomass cellulosome DNA-cellulase conjugate | S-6 | 922 | |
=A205 | Characterization of liposome prepared by non-solvent supercritical reverse phase evaporation method | liposome supercritical vesicle | S-6 | 927 | |
==A205 | Selective cytotoxicity to cancer cells induced by self-assembly of a supramolecular gelator | supramolecular gelator self-assembly selective cytotoxicity | S-6 | 936 | |
===A205 | A novel double coating carrier for effective cancer therapy | drug delivery system cancer therapy nanoparticle | S-6 | 941 | |
====A205 | Preparation of hydroxyapatite/PCL composite scaffold | hydroxyapatite polycaprolactone scaffold | S-6 | 144 | |
=====A205 | Micro-tissue assembly using near-infrared-responsive gel. | Carbon nanotube Micro-tissue Near infrared | S-6 | 389 | |
======A205 | Study on generation and elimination rate of nitric oxide in acidic condition | °ì»À²½ÃâÁÇ °¡¾Ë»À ¹³»À²½Êª¼Á | S-6 | 904 | |
=======A205 | Basic study on bioprocess analysis method using proteomic analysis | proteomic analysis Bacillus amyloliquefaciens MALDI-TOF-MS | S-6 | 535 | |
========A205 | High dimensional cell morphology informatics for cell quality analysis | clustering analysis cell quality check image analysis | S-6 | 56 | |
=========A205 | Polyphenol biosensor based on laccase from basidiomycetes | laccase chlorogenic acid biosensor | S-6 | 137 | |
A206 | Development of spheroid chip using honeycomb film | Honeycomb film Spheroid Micro well chip | S-6 | 184 | |
=A206 | Detection of a target molecule using aptamer-enzyme conjugates | DNA-enzyme conjugate Terminal deoxynucleotidyl transferase Microbial transglutaminase | S-6 | 225 | |
==A206 | Protein assembly on a polymer scaffold and its application to highly sensitive antigen detection | protein assembly polymer scaffold site-specific modification | S-6 | 391 | |
===A206 | Development of a high efficient cell sorting system using lattice-shaped microchannel networks | microfluidics cell sorting blood separation | S-6 | 411 | |
====A206 | Construction of skeletal muscle microtissues using microfluidic devices | BioMEMS Tissue Engineering Skeletal muscle | S-6 | 455 | |
=====A206 | Rapid evaluation of glycosylation on antibody and the possibility of application | Glycosylation heterogeneity Lectin Chemiluminescence assay | S-6 | 517 | |
======A206 | Development and application of high sensitive detection system for ligand screening of human G-protein-coupled receptors using yeast-based fluorescence reporter assay | G-protein-coupled receptor yeast cell-surface display green fluorescence protein | S-6 | 526 | |
=======A206 | A DNA damage-induced gene expression system for cell sensors | cell sensors p53 promoter cytotoxicity | S-6 | 699 | |
========A206 | Quantitative real-time PCR analysis of baculovirus particles and correlation to virus titer | Baculovirus Real-time PCR Insect cell | S-6 | 599 | |
=========A206 | Drug susceptibility of cancer cell using magnetic force based three-dimensional cell culture array | cell patterning melanoma NPrCAP | S-6 | 602 | |
(11:00–12:00) ( Takahashi H.) | |||||
A207 | Novel method to quantitate amino groups on solid surfaces using fluorescent compounds | fluorescent compound quantification amino group | S-6 | 692 | |
=A207 | Effects of microwell chip structure on the spheroid characteristics | microwellchip spheroid HepG2 | S-6 | 170 | |
==A207 | iPS colony morphology informatics for standardization of iPS cell culture | iPS cell Morphology informatics Standardization | S-6 | 54 | |
===A207 | Generation of genetically modified feeder cells for the establishment of chicken pluripotent stem cells | pluripotent stem cells genetically modified feeder cells transgenic chicken bioreactor | S-6 | 662 | |
====A207 | Effect of fibroblast ratio on cytokine production in a myoblast sheet. | cell sheet skeletal muscle myoblast cytokine | S-6 | 710 | |
=====A207 | Transient expression of functional antibody molecules in insect cells | insect cell transient expression antibody | S-6 | 621 | |
======A207 | Regulation of stem cell differentiation by inhibition of migration | human stem cell migration regulation of differentiation | S-6 | 736 | |
=======A207 | Improvement of two-phase fermentation system for catechol production | Hydrophobic bioproduction Two-phase system Catechol | S-6 | 737 | |
========A207 | Effect of culture area restriction on maturation culture of retinal pigment epithelial cells | RPE cell culture area restriction | S-6 | 819 | |
=========A207 | Analysis of technician¡Çs movement for standardization of cell culture technique | cell culture movement standardization | S-6 | 796 | |
A208 | Designable production of novel biosurfactant by Pseudozyma hubeiensis. | yeast biosurfactant mannosylerythritol | S-6 | 89 | |
=A208 | Self-Assembled Oligopeptides for Electrochemical Cell Detachment | Tissue engineering Zwitterionic oligoepeptide Electrochemistry | S-6 | 173 | |
==A208 | Microbial fuel cell with controlling the intracellular redox status | microbial fuel cell redox status formate dehydrogenase | S-6 | 543 | |
===A208 | Design of non-cell adhesion surface using PEG molecules | Poly ethylene glycol non-adherent surface cell adhesion rate | S-6 | 195 | |
====A208 | Development of a fabrication method of hepatic lobule-like tissues utilizing cell-adhesive hydrogel fibers | Tissue engineering Hydrogel Hepatic tissue | S-6 | 343 | |
=====A208 | (withdrawn) | 100 | 506 | ||
======A208 | Selection of anti-ErbB2 antibodies using ErbB2/receptor chimera and dimerized antibody | antibody selection receptor engineering cell signaling | S-6 | 570 | |
=======A208 | Construction of artificial receptor aimed at specific activation of classical MAP kinase pathway | MAP kinase scaffold protein receptor engineering | S-6 | 574 | |
========A208 | Influence of Nanoscale Morphology of Peptide Amphiphiles on Cell Function | supramolecular hydrogel peptide amphiphile artificial extracellular matrix | S-6 | 582 | |
=========A208 | Gene expression analysis of genetically modified hepatoma cells with inducible high liver functions. | hepatoma cells liver-enriched transcriptional factor inducible liver function system | S-6 | 705 | |
A209 | Effect of peripheral amino acid residues on Sortase A - mediated modification of Lys residue | Protein modification Sortase A | S-6 | 744 | |
=A209 | Analysis of genes encoding tail fiber proteins in various T-even bacteriophages | bacteriophage tail fiber host range | S-6 | 837 | |
Hall B | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Progress and Prospects of Bioseparation Engineering - From Molecular Recognition to Nano/Micro-Separations -> | |||||
(10:00–11:00) ( Yada T., Kumada Y.) | |||||
B204 | Development of immobilization technology for antibody fragments and application to biosensing | Material-binding peptide antibody fragment immobilization | S-8 | 257 | |
B205 | Development of DNA microarray and its detector, which have a high signal-to-noise ratio, and their application. | microarray | S-8 | 230 | |
B206 | Rational design and engineering of affinity ligand to obtain improved chemical stability and elution properties | Protein A affinity chromatography | S-8 | 104 | |
(11:00–12:00) ( Ito T., Tanaka T.) | |||||
B207 | Clarification Process for Monoclonal Antibodies with Improved Depth Filters | Clarification Flocculation Monoclonal Antibodies | S-8 | 86 | |
B208 | Hollow fiber membrane with high protein-permeability | tangential flow filtration protein permeability clarification of cell culture | S-8 | 168 | |
B209 | Buffer type dependence of mAb aggregates reduction by AEX membrane | Anion-Exchange membrane mAb aggregates Flow through | S-8 | 191 | |
(13:00–14:20) ( Shirataki H., Yoshimoto N.) | |||||
B213 | Mechanism of Specific Influence of L-Glutamic Acid on the Crystal Shape of L-Valine | L-Valine L-Glutamic Acid Crystallization | S-8 | 149 | |
B214 | Thermo-responsive Protein A chromatography | Protein A antibody chromatography | S-8 | 797 | |
B215 | Protein Separation using a Cationic Mixed-Mode Resin | Tryptophan mixed-mode resin protein separation | S-8 | 103 | |
B216 | Problems in separation processes for biological products | bioseparation biological products validation | S-8 | 460 | |
(14:20–15:00) ( Yoshimoto M.) | |||||
B217 | [Keynote Lecture] Mechanistic models for separation processes of biological products | Mechanistic model Chromatography Biological products | S-8 | 449 | |
(15:00–15:20) ( Tanaka T., Yoshimoto M.) | |||||
General discussion | |||||
Hall C | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Frontier of biomass utilization technology development> | |||||
(14:20–15:40) ( Hasegawa I.) | |||||
C217 | Self-activation effect by pyrolysis gas in the carbonization process of sewage sludge | carbonization self-activation sewage sludge | S-50 | 798 | |
C218 | Characterization of various carbide | carbide characterization fuel | S-50 | 811 | |
C219 | Characterization of mesoporous carbon-iron oxide composite | mesoporous carbon iron oxide nanoparticl solid acid catalyst | S-50 | 774 | |
C220 | Examination of stabilization methods for preparing carbon fibers from low-rank carbonaceous resources upgraded by mild solvent treatment. | Carbon fibers Stabilization Iodine | S-50 | 858 | |
Hall D | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <CVD & Dry Process - Reaction Engineering for the Structure/Functions control> | |||||
(10:00–12:00) ( Saito T., Ikeda K.) | |||||
D204 | Structure and electrochemical performance of rapidly deposited silicon-based porous films for lithium ion rechargeable batteries | physical vapor deposition porous silicon films lithium ion batteries | S-2 | 956 | |
D205 | Construction of reaction mechanism of methyltrichlorosilane considering surface reactions for SiC-CVD process | SiC CVD reaction mechanism | S-2 | 637 | |
D206 | The study of the overall reaction model on SiC-CVD using Methyltrichlorosilane | SiC CVD Methyltrichlorosilane | S-2 | 436 | |
D207 | Plasma CVD of silica from hexamethyldisiloxane and oxygen | Plasma CVD HMDSO silica | S-2 | 835 | |
D208 | Vapor phase synthesis and characteristics of red luminescent silicon materials | CVD nanoparticles photoluminescence | S-2 | 410 | |
D209 | Mechanism of silicon formation via the zinc reduction of silicon tetrachloride | zinc reduction reaction silicon supersaturation | S-2 | 413 | |
(13:00–14:20) ( Shimoyama Y., Kawakami M.) | |||||
D213 | [Keynote Lecture] Materials Processing with Supercritical Fluids | Supercritical Nano Processing | S-2 | 885 | |
D215 | [Invited Lecture] Low-cost fabrication of compound semiconductor solar cells using supercritical fluid | supercritical fluid selenization solar cells | S-2 | 351 | |
D216 | Effect of alcohol addition on supercritical fluid deposition of TiO2 | Supercritical fluid deposition TiO$2$ alcohol | S-2 | 622 | |
(14:20–15:40) ( Kawase M., Tsukune A.) | |||||
D217 | [Keynote Lecture] Vapor Phase Epitaxy of Nitride Semiconductors by MOCVD | Nitride Semiconductors MOCVD Quantum Chemical Calculation | S-2 | 377 | |
D219 | Analysis and control of growth rate and composition in GaN-MOVPE (1) | GaN MOVPE È¿±þ²òÀÏ | S-2 | 855 | |
D220 | Analysis and control of growth rate and composition in GaN-MOVPE (2) | GaN MOVPE È¿±þ²òÀÏ | S-2 | 931 | |
Hall E | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <The Cutting-edge Research and Development of Micro Chemical Processes> | |||||
(11:00–12:00) ( Togashi S., Takebayashi Y.) | |||||
E207 | Evaluation of Mixing Performance in Micromixers by Formation of Nano-particles | Micromixer Pt nano particle mixing performance | S-30 | 275 | |
E208 | Effects of Liquid current on Particle Attachment to Bubble Surface in Microfluidic Device | armored bubbles micro channel microparticle adsorption | S-30 | 989 | |
E209 | Numerical simulation of two phase flow in microchannel using MPS method | MPS method Microchannel Simulation | S-30 | 655 | |
(13:00–13:40) ( Matsuoka A., Tonomura O.) | |||||
E213 | [Keynote Lecture] Micro chemical processing using heterogeneous catalyst - DSHP as an example | DSHP (Direct Synthesis of Hydrogen Peroxide) catalyst packed bed multiphase microreactor microfabrication | S-30 | 569 | |
(13:40–15:00) ( Ohta T., Aoki N.) | |||||
E215 | Production of Sheet-Like Hydroxyapatite Particles Using a Microreactor and Evaluation of the Characteristics | Hydroxyapatite Nanoparticles Microreactor | S-30 | 179 | |
E216 | Preparation of barium titanate nanoparticles by a microreactor | Microreactor barium titanate nanoparticles | S-30 | 204 | |
E217 | Fabrication of Polyimide nanoparticles dispersing metal nanoparticles by nanopackaging technique using a microreactor and their catalytic properties | polyimide nanoparticles metal nanoparticles microreactor | S-30 | 730 | |
E218 | Preparation of stereocomplex PEG-PLA fibers using microfluidics | wet-spinning solvent diffusion stereocomplex | S-30 | 929 | |
Hall F | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <For speculating the future of food engineering> | |||||
(9:20–10:40) ( Natsume M., Yoshii H.) | |||||
F202 | Kinetics of sucrose hydrolysis in subcritical aqueous ethanol | hydrolysis subcritical aqueous ethanol sucrose | S-12 | 16 | |
F203 | Direct observation of submicron emulsions using nanogap method | Nanogap Submicron emulsion Brownian motion | S-12 | 201 | |
F204 | Development of Micro-Device for Peptide Medicine | Micro-Reactor Freeze-Dry Peptide | S-12 | 269 | |
F205 | Evaluation of Yeast Fixed Bed Made by Freeze Dry | Freeze Dry Bio-Ethanol Enzyme Reaction | S-12 | 114 | |
(10:40–12:00) ( Kobayashi T., Iwabuchi H.) | |||||
F206 | Release behaviors of 1-MCP from 1-MCP/CD complex in electro spinning fiber | 1-¥á¥Á¥ë¥·¥¯¥í¥×¥í¥Ú¥ó ¥·¥¯¥í¥Ç¥¥¹¥È¥ê¥ó ¥¨¥ì¥¯¥È¥í¥¹¥Ô¥Ë¥ó¥° | S-12 | 635 | |
F207 | Characterization of emulsified fish oil powder by spray-drying | Fish oil Microencapsulation Spray-drying | S-12 | 658 | |
F208 | Characteristics of encapsulation and stabilization of oil droplets by freeze-dried amorphous sugar matrix: Influences of types of sugar surfactant | freeze-drying sugar surfactant oil droplet | S-12 | 680 | |
F209 | Interaction states of water molecules in aqueous solution~amorphous solid of sugar during drying | water amorphous sugar drying | S-12 | 688 | |
Hall G | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <New Development of Chemical Engineering by Plasma Processing> | |||||
(10:00–11:20) ( Itaya Y.) | |||||
G204 | Effect of Spatial Uniformity of Multi-Phase AC Arc on In-Flight Particle Characteristics | Thermal Plasma Multi-phase arc In-flight melting | S-3 | 554 | |
G205 | Synthesis of Metal-Containing Amorphous Nanoparticles by Induction Thermal Plasmas | Iron-containing nanoparticle Induction thermal plasma Functional nanoparticle | S-3 | 492 | |
G206 | Synthesis of carbon nanohorns dispersed with Fe nanoparticles and effects by CO2 activation | carbon nanohorn magnetization arc discharge | S-3 | 446 | |
G207 | Hydrogenation of unsaturated liquid organic compound containing geometric isomer using atmospheric pressure plasma jet | hydrogenation plasma geometric isomer | S-3 | 926 | |
(11:20–12:00) ( Watanabe T.) | |||||
G208 | [Keynote Lecture] Reactions of atmospheric pressure plasma on a gas-liquid interface | atmospheric plasma gas-liquid interface ionic liquid | S-3 | 176 | |
(13:00–13:40) ( Honma S.) | |||||
G213 | [Keynote Lecture] Simulation Technology of Plasma Processing using Finite Element Method | plasma processing simulation finite element | S-3 | 394 | |
(13:40–14:40) ( Onoe K.) | |||||
G215 | Spectroscopic Temperature¡¡Measurement of Microwave Plasma Induced by Active Cokes | Active coke Microwave plasma plasma temperature | S-3 | 763 | |
G216 | Reactions of hydroxyl radical formed microwave excited bubble plasma | plasma hydroxyl radical terephthalic acid | S-3 | 306 | |
G217 | Reaction of lignin model compounds using microwave excited bubble plasma | Plasma Biomass Lignin | S-3 | 302 | |
(14:40–15:40) ( Takahashi K.) | |||||
G218 | Carbon Material Synthesis by Activated Cokes-Induced Microwave Plasma | microwave plasma carbon nano-material tar | S-3 | 586 | |
G219 | Safety Evaluation of PCBs-containing Insulation Oil Treatment Using Plasma-assisted Combustion | Plasma-assisted Combustion PCBs Dioxins | S-3 | 101 | |
G220 | Study of ozonizer using alumite discharge electrode | ozonizer alumite discharge | S-3 | 646 | |
Hall H | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Innovative Challenges of Chemical Reaction Engineering Contributing to Resources, Energy and Environmental Issues> | |||||
(9:00–10:20) ( Ichihashi Y., Watanabe R.) | |||||
H201 | Behavior of Oxygen in Catalytic Partial Oxidation of Methane on Ni/Al2O3 Catalyst Evaluated by Pulse Reaction | catalytic partial oxidation pulse reaction Ni/Al2O3 catalyst | S-28 | 328 | |
H202 | selective oxidation with a voltage dependent in PAFC-type reactor | selective oxidation fuel cell type reactor | S-28 | 893 | |
H203 | Effect of metal additives to Ru/TiO2 catalysts on selective CO methanation | Selective CO methanation Ruthenium Metal additive | S-28 | 834 | |
H204 | Multi-Faceted Microkinetic Simulations toward the Real Surface Modeling | Microkinetic Modeling Multi-Facet Steam Hydrocarbon Reforming | S-28 | 967 | |
(10:20–12:00) ( Kikuchi R., Hiramatsu Y.) | |||||
H205 | Preparation of Ni/Carbon Catalyst by Using Inexpensive Carbonaceous Materials and Application to Hydrothermal Gasification of Water-soluble Organic Compounds | Ni/Carbon Catalyst Hydrothermal gasification | S-28 | 608 | |
H206 | Decomposition behavior of the representative compounds of heavy oil | Heavy oil Titania-Zirconia oxide Catalytic cracking | S-28 | 404 | |
H207 | Upgrading of heavy oil over Fe-Ti oxide catalyst in superheated steam | Heavy oil Oxide catalyst Catalytic cracking | S-28 | 625 | |
H208 | Effect of Zirconium Addition to Cu/HZSM-5 Catalysts on Gas-Phase Oxidation of Benzene | Cu/HZSM-5 phenol partial oxidation | S-28 | 818 | |
H209 | Synthesis of TS-1 zeolite covered with Silicalite-1 and catalytic activity on liquid phase oxidation | Zeolite Oxidation Titanium silicalite-1 | S-28 | 396 | |
(13:00–14:20) ( Nishiyama N., Tago T.) | |||||
H213 | Behavior of finely dispersed phase in liquid-liquid system using an ultrasonic wave. | ultrasonic wave cavitation emulsification | S-28 | 310 | |
H214 | Influence of evaporation on alcohol condensation using ultrasonic atomization | Ultrasound Atomization Evaporation | S-28 | 840 | |
H215 | Oxidative degradation of organic pollutants utilizing Fenton oxidation with electrochemical reduction | Fenton oxidation Electrochemical reduction 1,4-dioxane | S-28 | 237 | |
H216 | Analysis of tar generated during thermal decomposition of plastics waste | tar plastics gasification | S-28 | 119 | |
(14:20–15:40) ( Akiyama Y., Asakura Y.) | |||||
H217 | Removal of mercury from simulated coal gasification gas with metal oxide sorbents | Coal gasification gas Mercury removal Metal oxide sorbents | S-28 | 174 | |
H218 | Dechlorination of RDF by water condensation | RDF dechlorination condensation | S-28 | 190 | |
H219 | A heating method for the preparation of doped metal oxide powders | metal oxide doping heat treatment | S-28 | 755 | |
H220 | Development of a flowable hydtare materials for latent heat storage | Heat Storage Material Hydrate flowable | S-28 | 39 | |
Hall I | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <The Subjects and Approaches to Process Safety Management> | |||||
(9:40–11:00) ( Shimada Y.) | |||||
I203 | Framework of Process Safety management and trend of Metrics | process safety Management Metrics Framework | S-16 | 421 | |
I204 | An approach to safety metrics based on business process model | safety metrics plant safety management business process model | S-16 | 183 | |
I206 | Modeling of the Process Development Process | Process Chemistry Process Hazard Analysis Process Development | S-16 | 192 | |
(11:00–12:00) ( Tsuge Y.) | |||||
I207 | Framework based Plant Maintenance System | Plant Maintenance Framework Maintenance System | S-16 | 139 | |
I208 | Application of Chemical Process Plant's Accidents | Accident Progress Flow Analysis | S-16 | 439 | |
I209 | Countermeasure for preventing self-ignition accident in chemical plant | self-ignition SIT leakage | S-16 | 21 | |
Hall J | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Fuel Cells, Solar Cells, Batteries and Other Future Energy Device Technologies - Materials, Processing and Systems Approach-> | |||||
(9:20–10:20) ( Inoue G., Koyama M.) | |||||
J202 | Evaluation of oxygen reduction activity and durability of silver-catalyzed gas diffusion electrode for zinc-air battery | Zinc-air battery Silver catalyst Oxygen reduction/evolution reaction | S-4 | 256 | |
J203 | Preparation of Li2FeP2O7/C¡¡and its lithium battery performance | Li2FeP2O7 Cathode Lithium batteries | S-4 | 374 | |
J204 | Mechanism of lithium-ion battery explosion | lithium-ion battery mechanism explosion | S-4 | 847 | |
(10:20–11:00) ( Koyama M.) | |||||
J205 | The Effect of Si Particle Morphology and Coating and Drying Process to the Si Anode Performance for Li-ion Batteries | Li-ion battery silicon anode drying process | S-4 | 957 | |
J206 | Development of anisotropy in porous collector by electrodeposition with hydrogen bubble template method | porous collector electrodeposition hydrogen bubble | S-4 | 983 | |
(11:00–12:00) ( Tukui S.) | |||||
J207 | [Invited Lecture] Development and future prospects of all-solid-state battery | all-solid-state battery | S-4 | 913 | |
(13:00–14:00) ( Ootomo J., Inoue G.) | |||||
J213 | Impact of various hydrogen production options on the reduction of GHG emissions | hydrogen production GHG emissions energy system modeling | S-4 | 919 | |
J214 | First-principles Study on Electronic Structure of Solid Oxide Fuel Cell Cathode | SOFC Cathode First-principles | S-4 | 937 | |
J215 | Conductivity changes in reductive atmosphere of materials with K2NiF4 structure (PrSrInO4) as electrolyte material for proton-type Solid Oxide Fuel Cells | Solid oxide fuel cell electrolyte ionic conductor | S-4 | 990 | |
(14:00–14:40) ( Fukunaga H.) | |||||
J216 | Evaluation of microstructure and proton conductivity in phosphate glass-ceramics | proton conducting glass-ceramics sol-gel method fuel cell | S-4 | 954 | |
J217 | Study on physicochemical properties for proton conductivity in lanthanum tungstate | proton conductor lanthanum tungstate fuel cell | S-4 | 986 | |
Hall M | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <The session of the membrane technologies in the industrial application 2013 <Invited presentations only>> | |||||
(11:00–12:00) ( Matsuyama H., Shintani T.) | |||||
M207 | Application of membrane water treatment technology in China | Membrane Water treatment application | S-47 | 22 | |
M208 | Cellulose Acetate Hollow Fiber UF Membrane for Water Treatment | Cellulose Acetate Membrane Water Treatment | S-47 | 34 | |
M209 | New Single Layer Large Diameter-type UF membrane and its filtration property | membrane waste water treatment in-to-out filtration | S-47 | 462 | |
(13:00–15:00) ( Matsukata M., Mimura K.) | |||||
M213 | Applicationof MBR and MBR-RO for industrial waste water treatment | MBR RO membrane | S-47 | 939 | |
M214 | Innovative design concept for spiral wound element -LD TechnologyTM- | Reverse Osmosis Biofouling Spiral wound element | S-47 | 220 | |
M215 | Advanced Technology for Stabilizing RO Membrane Performance | Reverse osmosis Chemical durability Low-fouling | S-47 | 485 | |
M216 | CFD simulation of both open-ended hollow-fiber reverse osmosis module | CFD Hollow Fiber Reverse Osmosis | S-47 | 25 | |
M217 | Practical applications of zeolite membrane | S-47 | 1019 | ||
M218 | Permselectivities of high-silica CHA-type zeolite (MSM-1) membrane | S-47 | 1020 | ||
Communication time | |||||
Hall O | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Recent Progress in Particle-Fluid Separation Technology> | |||||
(9:00–10:20) ( Hakoda M., Sumiya M.) | |||||
O201 | Effect of Coexisting Clay on Membrane Filtration Properties of Virus-Containing Suspension | membrane filtration virus clay | S-39 | 762 | |
O202 | Decolorization Properties of Dye by Membrane Reactor Using White-Rot Fungus Broth | membrane decolorization dye | S-39 | 766 | |
O203 | Neutralization treatment of wastewater containing nickel by alkaline chemicals | Nickel Neutralization Treatment Characteristic of Sediment | S-39 | 791 | |
O204 | Effect of ultrasonic frequency in freeze concentration process with ultrasonic irradiation | ultrasonic frequency freeze concentration ultrasonic irradiation | S-39 | 795 | |
(10:20–12:00) ( Iwata M., Katoh Y.) | |||||
O205 | Effect of solid concentration and flocculant dose on flocculation phenomena | flocculation tester flocculation rate process floc size distribution | S-39 | 72 | |
O206 | Ultrahigh-Pressure Expression of Excess Sewage Sludge Assisted with Disruption and Coagulation Processes of Cell | ultrahigh-pressure expression dewatering sewage sludge | S-39 | 779 | |
O207 | Effect of flocculants on electro-osmosis dewatering of concentrated sewage sludges | electro-osmosis flocculant | S-39 | 451 | |
O208 | Effect of¡¡sludge particle size on electro-osmosis dewatering | electro-osmosis dewatering | S-39 | 279 | |
O209 | Development and the cell separation characteristic of a multi-stage electrode type dielectrophoresis separation device | dielectrophoresis separation-device filter | S-39 | 278 | |
Hall Q | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <New Developments in Advanced Technology with Sub- and Supercritical Fluids> | |||||
(9:20–10:00) ( Sasaki M.) | |||||
Q202 | [Invited lecture] Application of supercritical fluid processes for advanced solar cells and lithium ion battery materials | supercritical fluid solar cell lithium ion battery | S-14 | 31 | |
(10:00–12:00) ( Watanabe M., Kihara S.) | |||||
Q204 | Fabrication of compound semiconductor films for CZTS solar cells via supercritical fluid selenization and sulfuration | Solar Cell Supercritical Fluid Thin Film | S-14 | 198 | |
Q205 | coating of 3-dimensional high aspect ratio through-holes using supercritical carbon dioxide. | Supercritical carbon dioxide 3-D interconnections Copper deposition | S-14 | 820 | |
Q206 | Supercritical hydrothermal synthesis of perovskite type nanoparticles and its formation mechanism | Supercritical water Hydrothermal synthesis Perovskite structure | S-14 | 51 | |
Q207 | Elucidation of production mechanism and design technique of rubrene thin films using the rapid expansion of supercritical solutions technique | RESS technique rubrene thin film production thin films design | S-14 | 469 | |
Q208 | Effects of substrate temperatures on the production of organic-semiconductor thin films by the rapid expansion of supercritical solutions (RESS) technique | RESS technique organic-semiconductor thin films substrate temperatures effects | S-14 | 998 | |
Q209 | Elucidation of Co-solvent Effects of (-)-Borneol on the Production of Theophylline nanoparticles by the RESS-SC Technique | RESS-SC technique Theophylline nanoparticle production Solid cosolvent effects | S-14 | 471 | |
(13:00–15:20) ( Sasaki M., Matsuyama K.) | |||||
Q213 | Polymorphism with the nanoparticle production of drugs by the rapid expansion of supercritical solutions (RESS) technique | RESS technique polymorphism drugs | S-14 | 475 | |
Q214 | Examination of versatility of nanoparticle design technique of drugs using the rapid expansion of supercritical solutions technique | RESS technique drugs nanoparticle design | S-14 | 472 | |
Q215 | ScCO2-assisted Electroless Ni-P Plating on Acrylonitrile-Butadiene-Styrene Substrate | electroless plating acrylonitrile-butadiene-styrene hydrophilic modification | S-14 | 612 | |
Q216 | Injection of functional agents to inside of cotton fiber with supercritical carbon dioxide and water | Injection cotton fiber nanoparticle | S-14 | 64 | |
Q217 | Effect of water on ophthalmic drug delivery system by supercritical solvent impregnation | supercritical solvent impregnation carbon dioxide ophthalmic drug delivery system | S-14 | 367 | |
Q218 | Preparation of polymer composite particles with supercritical fluids¡¡spraying | polymer compoiste PGSS supercritical fluids | S-14 | 810 | |
Q219 | The relationships between physical properties of the polymer and the foam morphology in polymer foaming. | foaming polymer supercritical | S-14 | 641 | |
Hall R | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Symposium of the Division of Materials Engineering and Interfacial Phenomena: Coating technology and Surface Processing> | |||||
(10:00–11:00) ( Nakano K., Yamamura M.) | |||||
R204 | A study of position control of particles in coating film | particle sedimentation simultaneous coating | S-37 | 222 | |
R205 | Development of drying simulation software of a coating film | simulation drying coating | S-37 | 215 | |
R206 | Effect of several factors on dewetting of nanoparticle/polymer composite thin films | Nanoparticles Polymer composite film Dewetting | S-37 | 665 | |
(11:00–12:00) ( Yahiro T., Yamamura M.) | |||||
R207 | A novel model development of oxygen inhibition reaction in UV-cured coating process | UV modeling kinetics | S-37 | 486 | |
R208 | Coating Flow Simulation using a Super-Computer | coating simulation super-computer | S-37 | 212 | |
R209 | Formation of particle layer in the drying process of clay dispersion | film formation clay dispersion gel | S-37 | 673 | |
=R209 | The formation dynamics of emission layer of host-guest OLED through coating and drying process | organic semiconductor wet process nanostructure | S-37 | 945 | |
==R209 | Structual formation of emission layer of low molecular - polymer combined OLED | structual formation wet process OLED | S-37 | 696 | |
(13:00–14:00) ( Yasuhara M., Komoda Y.) | |||||
R213 | [Invited Lecture] New developments of green technology by using paper and printing | Green Technology Printing Paper | S-37 | 450 | |
R215 | Measurement of Liquid Film on Gravure Roll Surface | coating gravure roll doctor blade | S-37 | 882 | |
(14:00–14:40) ( Yoshida F., Komoda Y.) | |||||
R216 | Kinetic study on packing behaviour of colloidal particles and subsequent film formation/deformation due to drying | drying of a suspension packing behavior formaiton/deformation of colloidal films | S-37 | 546 | |
R217 | Structural anisotropy and birefringence in colloidal films formed via drying of a colloidal suspension | drying of a suspension colloidal films nanometer-scale distortion due to drying | S-37 | 549 | |
(14:40–15:20) ( Murai T., Inasawa S.) | |||||
R218 | Estimation of Coating Drying Rate on Different Base Film | drying rate curve Fick type coating coating base | S-37 | 955 | |
R219 | The judging method of binary Fick type coating using a drying curve | drying rate curve Hydroxypropylcellose Fick type coating | S-37 | 974 | |
Hall S | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Symposium of the Division of Materials Engineering and Interfacial Phenomena: Progress in Materials Processing and Interfacial Design> | |||||
(10:00–12:00) ( Nagamine S., Ishi H.) | |||||
S204 | Synthesis of Silica-coated AgCl Particles in two-phase system | silica coating silver chloride surface engineering | S-33 | 518 | |
S205 | Fabrication of organic silica shell on the magnetite nanoparticles in amine | amine magnetite nanoparticle organic silica | S-33 | 723 | |
S206 | Development of Silica-Coated Quantum Dots for Imaging in Medical Diagnosis | quantum dot silica-coating nanoparticle | S-33 | 128 | |
S207 | Universal behavior of membrane damage of mammalian cells caused by silica nanoparticles | Nano risk Nanoparticles Membrane damage | S-33 | 559 | |
S208 | Fabrication of dendrimer fixed substrate and evaluation of biomolecule adsorption | dendrimer E.coli adsorption | S-33 | 332 | |
S209 | Detection of protein using glycopolymer-immobilized metal mesh device sensor | glycopolymer biosensing metal mesh device | S-33 | 573 | |
Hall U | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Function enhancement, novel development and application related to functional particle, polymeric and gel materials> | |||||
(8:40–9:40) ( Ogi T.) | |||||
U200 | Preparation and characterization of zeolite monolith by unidirectional freezing and steam-assisted crystallization | Zeolite monolith Unidirectional freezing Steam-assisted crystallization | S-36 | 226 | |
U201 | Flow Synthesis of Silica-Au Core-Shell Particles by Using Microreactor | Microreactor Core-shell Plasmon | S-36 | 154 | |
U202 | Synthesis of monodisperse, crystallized titania particles supporting metal nanoparticles for photocatalytic use | Monodisperse titania Metal nanoparticles Photocatalyst | S-36 | 358 | |
(9:40–10:40) ( Watanabe S.) | |||||
U203 | ):Synthesis of Hollow Silica Nanoparticles Using Block Copolymers Bearing Amino Groups | silica hollow nanoparticles block copolymer | S-36 | 892 | |
U204 | The catalytic activity of Pd-supported nanoparticle–immobilized silica membrane type reactor | Nanoparticle Membrane-type reactor Pd | S-36 | 435 | |
U205 | Effect of side chain length of pH-responsive polymer to form unimolecular micelles on BPA adsorption behavior | unimolecular micelle pH-responsive polymer adsorption | S-36 | 388 | |
(10:40–11:40) ( Nakayama M., Seida Y.) | |||||
U206 | Adsorption behavior of various cations and anions on zwitterionic sulfobetaine gels | sulfobetaine transition behavior adsorption | S-36 | 287 | |
U207 | Adsorption and desorption of hydrophobic materials using thermosensitive gel containing magnetic particles by alternating magnetic field | thermosensitive gel magnetic field adsorption | S-36 | 401 | |
U208 | Thermosensitivity of poly[oligo(ethylene glycol) methyl ether methacrylate] gels in aqueous NaCl solution. | thermosensitivity poly[oligo(ethylene glycol) methyl ether methacrylate] gels swelling behavior | S-36 | 398 | |
(11:40–12:20) ( Iizawa T.) | |||||
U209 | Measurement of viscoelasticity of gel by means of cryo-QCM-A | QCM-A cryogenic measurement viscoelasticity | S-36 | 474 | |
U210 | Evaluation of Sb2O3 addition on water durability of lead-free glasses composed of V2O5-H2WO4-KPO3 | V2O5-H2WO4-KPO3 glass Sb2O3 water durability | S-36 | 249 | |
Hall V | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Symposium on Energy Engineering> | |||||
(10:00–11:00) ( Kumita M., Kubota M.) | |||||
V204 | Reduction Kinetics of Oxygen Carrier using Oxide Ion Conductor in Chemical-Looping Combustion | chemical looping combustion oxide ion conductor reduction kinetics | S-15 | 276 | |
V205 | Evaluation of support effect on redox reaction of iron oxide for hydrogen storage system | iron oxide oxide ion conductor hydrogen | S-15 | 942 | |
V206 | Dehydration and Hydration reactivity of Mg(OH)2-Ni(OH)2 composite material prepared by Mechanochemical method | Heat storage material Mechanochemical method composite material | S-15 | 178 | |
(11:00–12:00) ( Fujioka K., Ryu J.) | |||||
V207 | Pore Widening Treatment of Anodized Aluminum Oxide Film and Calcium Chloride Impregnation into the Pores | CaCl$2$-anodic alumina composite Pore widening treatment Water vapor sorption | S-15 | 697 | |
V208 | Water Sorption Characteristics of Calcium Chloride/Anodized Alumina Composites | CaCl2-anodized alumina composite X-ray analysis Water vapor sorption | S-15 | 859 | |
V209 | Preparation of Mesoporous Silica/Aluminum Composites for Water Vapor Sorption | mesoporous silica electrophoretic deposition water vapor adsorption | S-15 | 695 | |
(13:00–14:00) ( Tsuji T., Tamura K.) | |||||
V213 | Priority setting for policy making on research and development in energy field | Energy Policy making | S-15 | 85 | |
V214 | Design of technology introduction scenario considering characteristics of power generation technologies | Photovoltaic power generation Load following capability Timing and Speed of implementation | S-15 | 827 | |
V215 | Life-prolonging of sugar-alcohol phase-change-material by dropping their melting point. | Phase change material thermal energy storage nanomaterial | S-15 | 850 | |
(14:00–15:00) ( Koyama M., Sekine Y.) | |||||
V216 | Applications of the Ionic Semiconductor for Energy Related Fields | the Ionic Semiconductor Antioxidative Effect Energy Consumption Reduction Systems | S-15 | 66 | |
V217 | easurement and Modeling for Thermal Conductivity of Artificial Core Samples at the decomposition of Methane Hydrates by Depressurizing Method | Methane Hydrates Thermal Conductivity Core Structure | S-15 | 557 | |
V218 | Simplification and Energy Saving of Drying Process Based on Self-Heat Recuperation Technology | Drying self-heat recuperation (SHR) energy saving | S-15 | 209 | |
Hall W | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Progress in Innovative Powder Process Technology -Generation, Functionalization, Measurement, Characterization and Handling-> | |||||
(9:00–10:00) ( Seto T.) | |||||
W201 | Microscopic observation of fine particles on a vibrating plate and analysis of transport property by dynamic model | fine particle vibration agglomerate | S-19 | 242 | |
W202 | Characterization of contact charging of fine particles using vibration and electric field and study on charging control method | Particle contact charging Vibration Electric field | S-19 | 254 | |
W203 | Mixed state evaluation of composite material model using an acoustic propagation characteristic | Acoustic propagation characteristic Mixed state Composite material | S-19 | 380 | |
(10:00–11:00) ( Yoshida M.) | |||||
W204 | Examination of the performance enhancement of the louver classifier | louver classifier | S-19 | 221 | |
W205 | Effect of inlet free air on particle separation performance of gas-cyclone | Particle classification Gas-cyclone Collection efficiency | S-19 | 522 | |
W206 | Recovery of zinc component from cupola dust with using the classifier | zinc cupola dust classification | S-19 | 125 | |
(11:00–12:00) ( Yoshida H.) | |||||
W207 | Characterization and application of nanoparticle film generated by low-pressure impactor | Low pressure impactor Laser ablation Li-ion battery | S-19 | 764 | |
W208 | 2-dimentional patterning of nanoparticles onto polymer film by electrostatic deposition | Nanoparticle Electrical field Deposition | S-19 | 407 | |
W209 | Effect of ratio of hypothetical capillary radius to electric double-layer thickness on electroosmotic flow rate through particle packed bed | electroosmotic flow rate electric double-layer particle packed bed | S-19 | 765 | |
Hall XB | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Bubbles, Drops, and Particles Dispersion Engineering 2013> | |||||
(9:00–10:00) ( Mizuta K.) | |||||
XB201 | The effect of initial flow conditions on the motion of single bubbles rising through hydrophobically modified alkali-soluble emulsion polymer solutions | Bubble rise motion HASE solution Viscoelastic fluid | S-20 | 163 | |
XB202 | Behaviors of a Methane bubble under hydrate forming conditions | Methane Hydrate Energy resources | S-20 | 677 | |
XB203 | A relation between the mean velocity of the disparsed phase and that of dispersed particles | multiphase flow interaction term mean velocity | S-20 | 71 | |
(10:00–11:00) ( Honma S.) | |||||
XB204 | Implementation of Immersed Boundary into Interface Capturing Scheme | Immersed Boundary Interface Captureing Multiphase Flow | S-20 | 501 | |
XB205 | CFD¡¡analysis on the flow induced by a surface-oscillating bubble in the quasi-2D system | a single bubble confinement CFD | S-20 | 992 | |
XB206 | Numerical analysis of deformation of a high-viscous drop in simple shear flow | Drop deformation Shear flow Numerical analysis | S-20 | 161 | |
(11:00–12:00) ( Fujioka S.) | |||||
XB207 | Numerical simulation of compound droplet formation from a double nozzle | Compound droplet Numerical simulation Front-Tracking | S-20 | 576 | |
XB208 | Development of Fundamental Technology for Computational Fluid Dynamics by Japanese Chemical Company (Part 2: Estimation of Fluidization Bed and Stiired Rector with Free Surface) | Computational Fluid Dynamics Fluidized Bed Stired Tank Reactor | S-20 | 13 | |
XB209 | [Outstanding Paper Award] Numerical Simulations of a Bubble Rising through a Shear-Thickening Fluid | Shear-thickening fluid Bubble rise motion Numerical simulation | S-20 | 5 | |
(13:00–14:00) ( Shimada N.) | |||||
XB213 | CFD analysis of droplet formation in a membrane emulsification | CFD membrane emulsification | S-20 | 905 | |
XB214 | Effect of ions and pH for nanosilica suspensions | suspension nanosilica dilatant flow | S-20 | 295 | |
XB215 | Standing time dependence of stability of surfactant-free O/W emulsion | surfactant-free O/W emulsion Standing time dependence | S-20 | 347 | |
Hall XD | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Recent Research and Development of Process Systems Engineering> | |||||
(9:00–10:20) ( Takeda K., Hamaguchi T.) | |||||
XD201 | Development of a new index to monitor database for adaptive soft sensors | soft sensor adaptive model database monitoring | S-23 | 49 | |
XD202 | Development of systematic design methodology for heat integrated distillation processes | process synthesis distillation internal heat integration | S-23 | 1015 | |
XD203 | Calibration model design using spectrum for input variable scaling | Partial least squares Near infrared spectrum Input variable scaling | S-23 | 233 | |
XD204 | Technology modeling for regional system design based on biomass resource | Life cycle assessment Material flow analysis Simulation | S-23 | 473 | |
(10:20–11:40) ( Kaneko H., Takeda K.) | |||||
XD205 | Ant colony optimization approach to the multi-objective TSP using the Pareto ranking | ant colony optimization multi-objective traveling salesman problem Pareto ranking | S-23 | 572 | |
XD206 | Construction of fault diagnostic system based on a Petri net model | fault diagnosis Petri net place invariant | S-23 | 717 | |
XD207 | Support of environmentally conscious process design in small and medium-sized enterprises | small and medium-sized enterprises process design life cycle assessment | S-23 | 783 | |
XD208 | Design of Biomass Utilization System Considering Influence on Petroleum Refining | bio-based petroleum products refinery system design | S-23 | 833 | |
(13:20–14:40) ( Hamaguchi T., Kaneko H.) | |||||
XD214 | The early fault detection in plants by using soft sensors | Soft sensor MSPC Fault detection | S-23 | 182 | |
XD215 | Proposition of a new application of soft sensors for process cotrol | process control soft sensor inverse analysis | S-23 | 977 | |
XD216 | Development and evaluation of the automatic modeling system for reaction mechanisms using bio-inspired algorithms | Bio-inspired algorithms chemical vapor deposition reaction model | S-23 | 987 | |
XD217 | Development and evaluation of the algorithms to estimate deposition profiles of CVD using GAs (2) | genetic algorithms chemical vapor deposition growth rate | S-23 | 999 | |
Hall XE | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <The Cost Management for Progress of the Globalization> | |||||
(10:20–11:20) ( Kanaya M.) | |||||
XE205 | Energy trend and Price forecasting | Energy Trend Price forecast Economic indicator | S-24 | 83 | |
XE206 | export¡¡strategy¡¡for¡¡global¡¡business | cost & project engineering alliance strategy | S-24 | 288 | |
XE207 | Study of an approximate cost associated with modular unit at the field plant construction. | Field Construction Construction cost Number of manpower | S-24 | 102 | |
(11:20–12:00) ( Shimizu M.) | |||||
XE208 | Study of various estimating techniques and these availability during preliminary stage in plant construction. | estimate preliminary plant | S-24 | 444 | |
XE209 | On the risk management of infrastructure | infrastructure utility risk management | S-24 | 42 | |
Hall XF | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Symposium by Division of Environment> | |||||
(9:00–10:20) ( Kubota F., Matsuoka A.) | |||||
XF201 | Behavior of heavy metals in phosphorus recovery from sludge ash | phosphorus recovery sludge ash recycling society | S-31 | 793 | |
XF202 | Effect of chlorine source on chloride volatilization of heavy metals from sewage sludge ash | sewage sludge ash chloride volatilization heavy metal | S-31 | 277 | |
XF203 | Extraction of Rare-earth from waste magnet by hydrometallurgical method | Magnet Recycling Hydrometallurgy | S-31 | 524 | |
XF204 | Recovery process of rare earth from phosphate gypsum by ion exchange resin method and oxalate precipitation method | rare earth cation exchange resin separation | S-31 | 429 | |
(10:20–11:00) ( Okada T.) | |||||
XF205 | Application of ionic liquid to the recovery of rare earth metals from fluorescent tubes | rare earth metals recycling fluorescent material | S-31 | 1003 | |
XF206 | Biosorption of tungsten for environmentally friendly recycling system | bacteria rare metal recycle | S-31 | 135 | |
(11:00–12:00) ( Sato M.) | |||||
XF207 | Design method for solvent extraction of metallic ion by using stacked multi-channel reactor(SMCR) | microchannel extraction rare metal | S-31 | 722 | |
XF208 | Separation of platinum group metals from base metals by solvent extraction | Platinum group Solvent extraction amide | S-31 | 598 | |
XF209 | Development of a novel adsorbent for selective recovery of rare earth elements | rare earth elements adsorption recovery | S-31 | 80 | |
(13:00–14:20) ( Koyama K.) | |||||
XF213 | [Keynote Lecture] Dynamic Material Flow Analysis for Metals | Metals Dynamic Material Flow Analysis | S-31 | 507 | |
XF216 | Solidification of fry ash using Ca-Al compound | Fry ash Solidification Calcination Product | S-31 | 43 | |
(14:20–15:20) ( Murayama N., Hiraga Y.) | |||||
XF217 | Dissolution characteristics of CaO particles into CaO-MgO-Al2O3-SiO2 molten slag | molten slag free-CaO viscosity | S-31 | 290 | |
XF218 | Pressured carbonation and the extraction characteristics of the calcium ferrite in slag | Steelmaking Slag Calcium Ferrite Ca extract | S-31 | 509 | |
XF219 | Observation of ceria abrasive particles recovered by combination of centrifugal separation and freezing - thawing | rare earth recycle ceria abrasive | S-31 | 754 | |
Hall XG | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <The newest physical properties research for next generation technology> | |||||
(9:00–10:40) ( Araki S., Ooba S. ) | |||||
XG201 | Acoustic cavitation¡¡effects on physical properties change in the ethanol aqueous solution | acoustic cavitation ethanol aqueous solution liquid structure | S-38 | 355 | |
XG202 | (withdrawn) | 100 | 512 | ||
XG203 | Correlation of phase equilibria for systems containing 1-butanol + water by concentration dependent surface area parameter model | liquid-liquid equilibrum concentraion dependent surface area parameter model 1-butanol+water | S-38 | 65 | |
XG204 | Evaluation of uncertainty in viscosity measurement using compact-sized falling needle rheometer | viscometer uncertainty viscosity | S-38 | 879 | |
XG205 | Density, viscosity and CO2 solubility of glyme-lithium sulfonate solutions | density viscosity CO2 solubility | S-38 | 804 | |
(10:40–11:20) ( Kodama D.) | |||||
XG206 | [Invited Lecture] Development of Lower GWP Refrigerants - Instrumentation and Data Evaluation - | refrigerants thermophysical property high pressure | S-38 | 548 | |
(11:20–12:00) ( Sugahara T.) | |||||
XG208 | [Invited Lecture] Fundamental Properties of Gas Hydrates and Their Extensive Application | gas hydrate phase equilibria cage occupancy | S-38 | 262 | |
(13:00–14:20) ( Matsuda H., Sasaki M.) | |||||
XG213 | Correlation of phase equilibria at high temperatures and pressures by PC-SAFT equation of state with association term for water – hydrocarbon interaction | pi-electron system high temperature and pressure water PC-SAFT equation of state | S-38 | 376 | |
XG214 | Measurement of interfacial tension for water + soybean system by Wilhelmy and their effect on O/W emulsion | O/W emulsion interfacial tension Wilhelmy method | S-38 | 368 | |
XG215 | Sublimation pressures of metal complexes and the solubilities in supercritical carbon dioxide | Sublimation Solubilities Metal complexes | S-38 | 645 | |
XG216 | High-Pressure Phase Behavior for Mixed Hydrates Containing Halogen-Substituted Cyclopentane Derivatives | gas hydrate phase equilibria high pressure | S-38 | 1002 | |
Hall ZB | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Cutting Edge of Biochemical Engineering (Poster Session with Flash Presentation)> | |||||
ZB2P01 | Growth Characteristic of photosynthesized Microorganism in a Taylor-Couette Vortex Flow Bio Reactor | Taylor-couette vortex flow Bioreactor Mixing | S-6 | 200 | |
ZB2P02 | Novel 3D neuronal culture technology combined ECM-mimetic material with thin-layer gel system | in situ observation neural ECM-mimetic material neural stem cell | S-6 | 555 | |
ZB2P03 | Effects of temperature on the growth and astaxanthin production of Haematococcus pluvialis | photobioreactor Haematococcus pluvialis astaxanthin | S-6 | 568 | |
ZB2P04 | Single cell culture array of cyanobacteria using magnetic particles | cyanobacteria cell culture array magnetic particles | S-6 | 601 | |
ZB2P05 | Microbial production of astaxanthin using corn cob hydrolyzate containing xylose and glucose | Corn cobs Astaxanthin Xanthophyllomyces dendrorhous | S-6 | 620 | |
ZB2P06 | Low cost production of concentrated xylitol from corn cob hydrolysates by Candida magnoliae | corn cobs xylitol candida magnoliae | S-6 | 709 | |
ZB2P07 | (withdrawn) | 100 | 721 | ||
ZB2P08 | Organic solvent tolerance of bacteria estimated by dilution with low cytotoxic organic solvent. | organic solvent tolerance bacteria logP | S-6 | 725 | |
ZB2P09 | Adsorption of imidazole peptide from chicken extract using Immobilized Metal Affinity Chromatography | IMAC adsorption carnosine | S-6 | 910 | |
ZB2P10 | Study of the efficient phosphoric acid eluting condition from poultry manure | Poultry manure Phosphoric acid Elution | S-6 | 732 | |
ZB2P11 | On a synergistic effect in enzymatic degradation of cellulosic biomass | cellulosic biomass hemicellulase synergism | S-6 | 464 | |
ZB2P12 | Effect of substrate on cellulase activity of cellulase-producing fungi | Trichoderma reesei cellulase cellulose | S-6 | 745 | |
ZB2P13 | Production of p-hydroxystyrene using Streptomyces lividans | Streptomyces lividans p-Hydroxystyrene fdc1 | S-6 | 752 | |
ZB2P14 | p-Hydroxycinnamic acid production directly from cellulose using Streptomyces lividans. | Cellulose Streptomyces p-hydroxycinnamic acid | S-6 | 878 | |
ZB2P15 | Improving water-dispersibility for curcumin utilizing inclusion property of casein in skim milk | curcumin skim milk solbility | S-6 | 911 | |
ZB2P16 | Enhancement of stability of a haloperoxidase by directed evolution | directed evolution haloperoxidase stability | S-6 | 916 | |
ZB2P17 | L-Lysine production from cellobiose using Cornebacterium glutamicum displaying ¦Â-glucosidase on its cell surface | Corynebacterium glutamicum L-lysine cellobiose | S-6 | 948 | |
ZB2P18 | Control of porous structure of PMMA membrane | PMMA porous membrane structure | S-6 | 146 | |
ZB2P19 | Composite materials of PLLA porous membrane and enzymatically polymerized phenol derivatives | porous membrane poly(L-lactic acid) enzymatic oxidative polymerization | S-6 | 148 | |
ZB2P20 | Hepatic differentiation of pluripotent stem cells using hollow fiber organoid culture method | Hollow fiber Hepatic differentiation Stem cell | S-6 | 379 | |
ZB2P21 | In vitro hematopoietic differentiation of pluripotent stem cells induced by organoid formation inside hollow fibers | hematopoietic differentiation hollow fiber stem cell | S-6 | 499 | |
ZB2P22 | Characterization of E. coli internal proteins adsorbed onto the polymer film surfaces | proteome analysis protein adsorption polymer film | S-6 | 693 | |
ZB2P23 | Analysis of Dynamic Behaviors of Chiral Recognition by Liposome Membrane | Membranome Chiral recognition Liposome membrane | S-6 | 712 | |
ZB2P24 | Formation of supramolecular gel by peptide amphiphile and its functions | Supramolecular gel Oil-in-Water Emulsion Transdermal delivery | S-6 | 714 | |
ZB2P25 | Regulation of Redox Reaction of TCA Cycle-Related Enzymes by Surface Designed-Liposomes | Membranome TCA cycle Redox reaction | S-6 | 727 | |
ZB2P26 | Adsorption characteristics of proteins genetically-fused with SiN-binding peptides | peptide-tag immobilization biosensor | S-6 | 771 | |
ZB2P27 | Temperature effect in ion-exchange chromatography of proteins | chromatography distribution coefficient Diffusion coefficient | S-6 | 777 | |
ZB2P28 | Passage operation of human skeletal muscle cells using hollow fiber membrane | passage human cell culture regenerative medicine | S-6 | 871 | |
ZB2P29 | Bacterial immobilization based on the characteristics of adhesive cell surface protein | Immobilization Gram-negative bacteria Adhesion | S-6 | 37 | |
ZB2P30 | Peptide synthesis by immobilized enzyme in liquefied amino acid substrates | enzymatic peptide synthesis immobilized enzyme ionic liquid | S-6 | 350 | |
ZB2P31 | Oriented immobilization of enzyme using sortase A-mediated transpeptidation | sortase A protein immobilization oriented immobilization | S-6 | 583 | |
ZB2P32 | Immobilization of PMMA-Tag-Fused Fab and its application to the immunodiagnosis | Fab refolding immobilization | S-6 | 853 | |
ZB2P33 | Characterization of enzymatically cross-linked poly(ethylene glycol) hydrogels | enzymatic cross-linking hydrogel poly(ethylene glycol) | S-6 | 261 | |
ZB2P34 | Determination of enzyme concentration in Mechaelis-Menten type reaction. | enzyme kinetics enzyme concentration michaelis-menten type reaction | S-6 | 1006 | |
ZB2P35 | Reactivity of lyophilized lipase including glass-forming saccharides | Lipase Saccharides Glass-forming | S-6 | 403 | |
ZB2P36 | Preparation and temperature-dependent membrane permeability of sphingomyelin vesicles | Sphingomyelin Liposomes Membrane permeability | S-6 | 109 | |
ZB2P37 | Reversible clustering of mixed liposomes induced by calcium ions | Liposome clusters Calcium ion Membrane permeability | S-6 | 285 | |
ZB2P38 | Development of a transdermal asthma inhibitor using Solid-in-Oil nanodispersion | Drug Delivery Asthma inhibitor Solid-in-Oil nanodispersion | S-6 | 476 | |
ZB2P39 | Development of efficient refolding method for PMMA-tag-fused scFv | scFv PMMA-tag refolding | S-6 | 585 | |
ZB2P40 | Development of effective cancer immunotherapy by using oil-based nano dispersion | transcutaneous immunization cancer vaccine nano dispersion | S-6 | 610 | |
ZB2P41 | Molecular design of an artificial cellulosome by conjugating different types of cellulases onto DNA scaffold. | cellulosic biomass cellulosome DNA-cellulase conjugate | S-6 | 922 | |
ZB2P42 | Characterization of liposome prepared by non-solvent supercritical reverse phase evaporation method | liposome supercritical vesicle | S-6 | 927 | |
ZB2P43 | Selective cytotoxicity to cancer cells induced by self-assembly of a supramolecular gelator | supramolecular gelator self-assembly selective cytotoxicity | S-6 | 936 | |
ZB2P44 | A novel double coating carrier for effective cancer therapy | drug delivery system cancer therapy nanoparticle | S-6 | 941 | |
ZB2P45 | Preparation of hydroxyapatite/PCL composite scaffold | hydroxyapatite polycaprolactone scaffold | S-6 | 144 | |
ZB2P46 | Micro-tissue assembly using near-infrared-responsive gel. | Carbon nanotube Micro-tissue Near infrared | S-6 | 389 | |
ZB2P47 | Study on generation and elimination rate of nitric oxide in acidic condition | °ì»À²½ÃâÁÇ °¡¾Ë»À ¹³»À²½Êª¼Á | S-6 | 904 | |
ZB2P48 | Basic study on bioprocess analysis method using proteomic analysis | proteomic analysis Bacillus amyloliquefaciens MALDI-TOF-MS | S-6 | 535 | |
ZB2P49 | High dimensional cell morphology informatics for cell quality analysis | clustering analysis cell quality check image analysis | S-6 | 56 | |
ZB2P50 | Polyphenol biosensor based on laccase from basidiomycetes | laccase chlorogenic acid biosensor | S-6 | 137 | |
ZB2P51 | Development of spheroid chip using honeycomb film | Honeycomb film Spheroid Micro well chip | S-6 | 184 | |
ZB2P52 | Detection of a target molecule using aptamer-enzyme conjugates | DNA-enzyme conjugate Terminal deoxynucleotidyl transferase Microbial transglutaminase | S-6 | 225 | |
ZB2P53 | Protein assembly on a polymer scaffold and its application to highly sensitive antigen detection | protein assembly polymer scaffold site-specific modification | S-6 | 391 | |
ZB2P54 | Development of a high efficient cell sorting system using lattice-shaped microchannel networks | microfluidics cell sorting blood separation | S-6 | 411 | |
ZB2P55 | Construction of skeletal muscle microtissues using microfluidic devices | BioMEMS Tissue Engineering Skeletal muscle | S-6 | 455 | |
ZB2P56 | Rapid evaluation of glycosylation on antibody and the possibility of application | Glycosylation heterogeneity Lectin Chemiluminescence assay | S-6 | 517 | |
ZB2P57 | Development and application of high sensitive detection system for ligand screening of human G-protein-coupled receptors using yeast-based fluorescence reporter assay | G-protein-coupled receptor yeast cell-surface display green fluorescence protein | S-6 | 526 | |
ZB2P58 | A DNA damage-induced gene expression system for cell sensors | cell sensors p53 promoter cytotoxicity | S-6 | 699 | |
ZB2P59 | Quantitative real-time PCR analysis of baculovirus particles and correlation to virus titer | Baculovirus Real-time PCR Insect cell | S-6 | 599 | |
ZB2P60 | Drug susceptibility of cancer cell using magnetic force based three-dimensional cell culture array | cell patterning melanoma NPrCAP | S-6 | 602 | |
ZB2P61 | Novel method to quantitate amino groups on solid surfaces using fluorescent compounds | fluorescent compound quantification amino group | S-6 | 692 | |
ZB2P62 | Effects of microwell chip structure on the spheroid characteristics | microwellchip spheroid HepG2 | S-6 | 170 | |
ZB2P63 | iPS colony morphology informatics for standardization of iPS cell culture | iPS cell Morphology informatics Standardization | S-6 | 54 | |
ZB2P64 | Generation of genetically modified feeder cells for the establishment of chicken pluripotent stem cells | pluripotent stem cells genetically modified feeder cells transgenic chicken bioreactor | S-6 | 662 | |
ZB2P65 | Effect of fibroblast ratio on cytokine production in a myoblast sheet. | cell sheet skeletal muscle myoblast cytokine | S-6 | 710 | |
ZB2P66 | Transient expression of functional antibody molecules in insect cells | insect cell transient expression antibody | S-6 | 621 | |
ZB2P67 | Regulation of stem cell differentiation by inhibition of migration | human stem cell migration regulation of differentiation | S-6 | 736 | |
ZB2P68 | Improvement of two-phase fermentation system for catechol production | Hydrophobic bioproduction Two-phase system Catechol | S-6 | 737 | |
ZB2P69 | Effect of culture area restriction on maturation culture of retinal pigment epithelial cells | RPE cell culture area restriction | S-6 | 819 | |
ZB2P70 | Analysis of technician¡Çs movement for standardization of cell culture technique | cell culture movement standardization | S-6 | 796 | |
ZB2P71 | Designable production of novel biosurfactant by Pseudozyma hubeiensis. | yeast biosurfactant mannosylerythritol | S-6 | 89 | |
ZB2P72 | Self-Assembled Oligopeptides for Electrochemical Cell Detachment | Tissue engineering Zwitterionic oligoepeptide Electrochemistry | S-6 | 173 | |
ZB2P73 | Microbial fuel cell with controlling the intracellular redox status | microbial fuel cell redox status formate dehydrogenase | S-6 | 543 | |
ZB2P74 | Design of non-cell adhesion surface using PEG molecules | Poly ethylene glycol non-adherent surface cell adhesion rate | S-6 | 195 | |
ZB2P75 | Development of a fabrication method of hepatic lobule-like tissues utilizing cell-adhesive hydrogel fibers | Tissue engineering Hydrogel Hepatic tissue | S-6 | 343 | |
ZB2P76 | (withdrawn) | 100 | 506 | ||
ZB2P77 | Selection of anti-ErbB2 antibodies using ErbB2/receptor chimera and dimerized antibody | antibody selection receptor engineering cell signaling | S-6 | 570 | |
ZB2P78 | Construction of artificial receptor aimed at specific activation of classical MAP kinase pathway | MAP kinase scaffold protein receptor engineering | S-6 | 574 | |
ZB2P79 | Influence of Nanoscale Morphology of Peptide Amphiphiles on Cell Function | supramolecular hydrogel peptide amphiphile artificial extracellular matrix | S-6 | 582 | |
ZB2P80 | Gene expression analysis of genetically modified hepatoma cells with inducible high liver functions. | hepatoma cells liver-enriched transcriptional factor inducible liver function system | S-6 | 705 | |
ZB2P81 | Effect of peripheral amino acid residues on Sortase A - mediated modification of Lys residue | Protein modification Sortase A | S-6 | 744 | |
ZB2P82 | Analysis of genes encoding tail fiber proteins in various T-even bacteriophages | bacteriophage tail fiber host range | S-6 | 837 | |
Hall ZC | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Fundamentals and Applications of Separation Technology (Poster)> | |||||
(9:00–12:00) ( Kodama A.) | |||||
ZC2P01 | Reactions of Materials for CO2 Separation and Capture (3) Tertiary Diamine | Absorption Amine Carbon dioxide | S-45 | 544 | |
ZC2P02 | High-Pressure Regenerative CO2 Chemical Solvent - CO2 Absorption Heat under High Pressure | CO2 chemical solvent High pressure CO2 absorption heat | S-45 | 498 | |
ZC2P03 | Synthesis and CO2 adsorption properties of various amine functionalized mesoporous silicas | Amine Mesoporous silica CO2 adsorption | S-45 | 674 | |
ZC2P04 | CO2 separation performances of zeolite T membranes | T zeolite membrane CO2 separation separation factor | S-45 | 263 | |
ZC2P05 | Development of ceramics absorbent for the purpose | ceramics materials CO2 seperation bariumu titanate | S-45 | 265 | |
ZC2P06 | Development of dense lithium silicate membrane for high temperature carbon dioxide separation | lithium silicate membrane high temperature carbon dioxide separation ethanol | S-45 | 91 | |
ZC2P07 | Fabrication of amino acid ionic liquid gel and its application to CO2 separation membranes | Membrane separation Amino acid ionic liquids Ionogel | S-45 | 906 | |
ZC2P08 | Basic tests on electrochemical CO2 separation from exhaust gas using anion exchange membrane | Anion exchange membrane Carbon dioxide separation Electrochemical process | S-45 | 304 | |
ZC2P09 | Development of activated desulfurization material by chemical modification of the metal oxide having a high specific surface area | desulfurization chemical modification diesel exhaust | S-45 | 607 | |
ZC2P10 | Study on diffusion behavior of water vapor in silicagel layer by using volumetric method | adsorption heat exchanger silicagel layer volumetric method | S-45 | 825 | |
ZC2P11 | Water adsorption behavior of Alkali treated USY zeolites | water Adsorption USY zeolite Alkali Treatment | S-45 | 344 | |
ZC2P12 | A study of the Adsorption Behavior of Organic compounds in Supercritical Carbon Dioxide with GCMC Simulation | Adsorption Supercritical carbon dioxide Molecular simulation | S-45 | 187 | |
ZC2P13 | Effect of water vapor on the adsorption column in solvent recovery PSA process -MRI analysis and simulation - | Pressure Swing Adsorption Stop & Go simulation MRI | S-45 | 188 | |
ZC2P14 | Azeotropic Adsorption Equilibrium of Mixed Organic Solvent on FAU Type High Silica Zeolite - Prediction by Molecular Simulation and Do¡Çs method - | Gravimetric method FAU type high silica zeolite Azeotropic adsorption | S-45 | 206 | |
ZC2P15 | Adsorption experiment and simulation to MSC3A of the multicomponent gas by volumetric method | Volumetric method Stop&Go simulation Adsorption | S-45 | 158 | |
ZC2P16 | Simulation Study of Adsorption of Benzene and Toluene in Supercritical CO2 on Packed Column Using Stop & Go Method | adsorption supercritical carbon dioxide Stop & Go simulation | S-45 | 160 | |
ZC2P17 | solvent recovery of trinary component PSA experiments and influence of water vapor | Pressure Swing Adsorption Stop & Go simulation Break through | S-45 | 141 | |
ZC2P18 | SIMULATION STUDY OF MULTI-COMPONENT GAS ADSORPTION ON MSC5A BY CHROMATOGRAPHIC METHODS | Chromatographic method Stop & Go simulation Adsorption | S-45 | 147 | |
ZC2P19 | Adsorption and desorption properties of hardness components in water by a novel thermosensitive adsorbent | thermosensitive polymer temperature swing adsorption | S-45 | 538 | |
ZC2P20 | Multi-coating of titanium compound to cation-exchange graft chain-containing fiber | multi-coating strontium removal titanium compound | S-45 | 334 | |
ZC2P21 | Preparation of vaterite type spherical calcium carbonate and application to functional materials | Vaterite calcium carbonate functional material | S-45 | 944 | |
ZC2P22 | Preparation of Liposome Immobilized Hydrogels and Their Characterization | Membranome Liposome-immobilized hydrogel Chiral separation | S-45 | 828 | |
ZC2P23 | Synergistic extraction of rare earth metals in ionic liquid systems | ionic liquids rare earth metals extraction | S-45 | 950 | |
ZC2P24 | Regeneration of Cu and DTPA from DTPA-Cu solution by use of electrodialysis acconpanied by electrochemical reaction | Electrodialysis Electrochemical reaction Ion-exchange membrane | S-45 | 490 | |
ZC2P25 | Selective liquid-liquid extraction of DNA-functionalized-quantum dots | Quantum dot DNA extraction | S-45 | 547 | |
ZC2P26 | Separation of Nd and Dy ions with HDEHP-impregnated fiber | separation rare-earth metals HDEHP-impregnated fiber | S-45 | 336 | |
ZC2P27 | Partition mechanism of oligosaccharides to vesicle | oligosaccharides vesicle partition | S-45 | 259 | |
ZC2P28 | Preparation and characterization of ZIF-8 membranes on surface-functionalized support | zeolitic imidazolate framework separation membrane surface modification | S-45 | 420 | |
ZC2P29 | Preparation of Zr-Based Metal Organic Framework UiO-66 membrane | Metal Organic Framework UiO-66 membrane | S-45 | 881 | |
ZC2P30 | Effect of post-treatment on the perm-selectivity of zeolite membrane | zeolite membrane | S-45 | 339 | |
ZC2P31 | Preparation and permeation properties of carbon membranes from wood tar materials | carbon membrane wood tar gas separation | S-45 | 799 | |
ZC2P32 | Permeation Properties of High Al-containing ZSM-5 Zeolite Membranes | zeolite membrane ZSM-5 pervaporation | S-45 | 629 | |
ZC2P33 | Gas permeation properties of metal-containing carbon membranes from lignin materials | carbon membrane lignin gas separation | S-45 | 776 | |
ZC2P34 | Fabrication of tough interpenetrating polymer network ionogel films for gas separation membrane | Ionogel Interpenetrating polymer network structure Gas separation membrane | S-45 | 651 | |
ZC2P35 | Basic tests on O2 separation from air using anion exchange membrane | anion exchange membrane oxygen separation electrochemical process | S-45 | 342 | |
ZC2P36 | Dehumidification of air by nano particle supported hygroscopic salt solution liquid membrane | liquid membrane dehumidification hygroscopic salt | S-45 | 579 | |
ZC2P37 | Development of water electrolysis cell with palladium-silver hydrogen permeable membrane as an electrode | hydrogen membrane electrolysis | S-45 | 115 | |
ZC2P38 | Dehydration of propane by using dendritic Pd membranes | Pd membrane dehydration of propane dendritic structures | S-45 | 247 | |
ZC2P39 | Steam-reforming of bio-ethanol using Pd membrane reactors supported on 3 kinds of porous stainless steel tubes | Pd/PSS membrane reactor bio-ethanol steam reforming | S-45 | 234 | |
ZC2P40 | Hydrogen separation membrane encapsulating Pd nanoparticles in a silica layer | Hydrogen Membrane Palladium | S-45 | 255 | |
ZC2P41 | Preparation of intermediate layers on a ceramic support for polyimide composite membranes | porous ceramic support polyimide membrane gas separation | S-45 | 908 | |
ZC2P42 | Ethanol separation from the aqueous solution by pervaporation using several hydrophobic MFI-type zeolite membranes | pervaporation hydrophobic zeolite membrane ethanol separation | S-45 | 340 | |
ZC2P43 | Selective separation of acetic acid from acetic acid/water mixtures by pervaporation using hydrophobic silica membrane | Pervaporation silica membrane | S-45 | 932 | |
ZC2P44 | Centrifugal Ultrafiltration Characteristics of Nanoparticle Slurry in a Membrane-inclined Centrifugal Cell | centrifugation ultrafiltration nanoparticle | S-45 | 307 | |
ZC2P45 | Preparation of temperature-responsive membrane and its separation characteristics | Temperature Responsive Polymer membrane separation | S-45 | 145 | |
ZC2P46 | Evaluation of lipid bilayer conformation for Preparation of lipid bilayer reverse osmosis membrane unsing Gramicidin A | Reverse osmosis membrane Biomimetic Lipid bilayer | S-45 | 627 | |
ZC2P47 | Development of Nanoparticle-Stacked Membranes Fabricated by Using Hydrogen Bonding | UF membrane nanoparticles hydrogen bonding | S-45 | 716 | |
ZC2P48 | Immobilization of phospholipid bilayers onto a hydrophobic inorganic porous membrane toward separation membrane | lipid bilayer immobilization hybrid membrane | S-45 | 666 | |
ZC2P49 | Direct numerical simulation of permeation of dispersed particles through a pore in constant-flux filtraion | transmembrane pressure direct numerical simulation immesed boundary method | S-45 | 800 | |
ZC2P50 | Control of cake layer thickness in flat sheet type MF membrane | two-phase flow microfiltration membrane aeration | S-45 | 560 | |
ZC2P51 | Removal of emulsion cutting oil by immobilization in calcium alginate gel | solid/liquid separation o/w emulsion expression | S-39 | 756 | |
Hall ZD | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Industrial Separation Technologies (Poster)> | |||||
(9:00–12:00) ( Kodama A.) | |||||
ZD2P01 | The study of chlorine dioxide for the purpose of preventing biofouling occurring on RO membrane | chlorine dioxide RO membrane biofouling | S-46 | 286 | |
ZD2P02 | Development of the high pressure mixture gas adsorption measurement equipment. | Volumetric - Chromatographic Mixture gas adsorption Compression coefficient of mixed gas | S-46 | 980 | |
Hall ZE | |||||
Time | Paper ID | Title / Autors | Keywords | Topic code | Ack. number |
Symposium <Poster Session of the Division of Materials Engineering and Interfacial Phenomena: Progress in Materials Processing and Interfacial Design> | |||||
ZE2P01 | Stress relaxation of polymer-polymer interface | rheology interface polymer | S-34 | 326 | |
ZE2P02 | Transition behavior of zwitterionic sulfobetaine polymer in salt solution | sulfobetaine polymer transition behavior UCST | S-34 | 384 | |
ZE2P03 | Characterization of Phase Separation Behaviors of Heterogeneous Giant Vesicles and Direct Observation of Amyloid Fibril Formation | Membranome Amyloid ¦Â Nucleation | S-34 | 842 | |
ZE2P04 | Preparation of giant lipid vesicles with degradable polyelectrolyte gel using an electrospray technique | electrospray technique giant lipid vesicle degradable polymer | S-34 | 390 | |
ZE2P05 | An examination for constructing multicompartment giant vesicles by lipid-coated ice droplet hydration method | giant vesicles microencapsulation multicompartment | S-34 | 537 | |
ZE2P06 | Sensing of liquid shear stress based on structural change of liposome membranes | Liposome membranes Liquid shear stress Bioreactors | S-34 | 293 | |
ZE2P07 | Adsorption of Substrates by Surface-Designed Liposome and Their Regulation | Membranome Surface charge density 1,3-Dipolarcycloaddition | S-34 | 724 | |
ZE2P08 | Reactivity of immobilized enzyme in reduced pressure gas phase system | Gas phase Reduced pressure Immobilized enzyme reaction | S-34 | 294 | |
ZE2P09 | Promotion of Hydrolysis Reaction by Fatty Acid Vesicles | Fatty acid Hydrolysis reaction Membranome | S-34 | 832 | |
ZE2P10 | Effect of liposome with heterogeneous lipid composition, on synthesis of 2,5-furandicarboxilic acid | HMF FDCA liposome | S-34 | 951 | |
ZE2P11 | Effect of Liposome membrane on L-Pro Catalyzed Michael Reaction | Membranome L-Proline Michael reaction | S-34 | 848 | |
ZE2P12 | Development of firefighting foam using biosurfactants | fire-fighting foam biosurfactant environmentally friendly | S-34 | 281 | |
ZE2P13 | Measurement of interfacial tension in an O / W emulsion with a drop volume method | drop volume method interfacial tension emulsion | S-34 | 706 | |
ZE2P14 | The viscosity and dispersion stability of the oil-in-water emulsion | oil-in-water emulsion rheology surfactant | S-34 | 634 | |
ZE2P15 | Crystal characteristics of calcium phosphates containing magnesium prepared in a W/O/W dispersion | microsphere calcium phosphate multiple dispersion | S-34 | 741 | |
ZE2P16 | One-step preparation of calcium phosphate/polymer hybrid microcapsules by electrospray | electrospray microcapsule calcium phosphate | S-34 | 902 | |
ZE2P17 | Preparation of polymeric gel particles by sedimentation polymerization using electrostatic atomization | gel sedimentation polymerization electrostatic atomization | S-34 | 345 | |
ZE2P18 | Preparation of humidity control microcapsules by the interfacial polymerization | microcapsule humidity conditioning | S-34 | 1009 | |
ZE2P19 | Pesticide effect of the encapsulation soil fumigant containing Allyl isothiocyanate of the natural derivation component | Microcapsule Pesticide Release | S-34 | 807 | |
ZE2P20 | Preparation of PCM microcapsules by using O/W dispersion | microcapsule O/W dispersion PCM | S-34 | 324 | |
ZE2P21 | Preparation of thermosensitive polymeric microorganogels by membrane emulsification technique and their drug release behaviors | thermosensitive gel organogel drug delivery system | S-34 | 348 | |
ZE2P22 | Preparation of biodegradable capsules composed of cellulose fiber shell by using the droplet coalescence method and their application | biodegradable capsules the droplet coalescence method cellulose fiber shell | S-34 | 335 | |
ZE2P23 | The characterization of alkaline collagen and its application for therapeutic angiogenesis | collagen angiogenesis | S-34 | 684 | |
ZE2P24 | Preparation of porous microparticles by using multiple emulsion | porous microparticle multiple emulsion suspension polymerization | S-34 | 323 | |
ZE2P25 | Development of novel supramolecular gelators based on benzenetricalboxyl acid | Low-molecular-weight gelator Self-assembly Amino acid | S-34 | 280 | |
ZE2P26 | Fabrication of the spheroids using hollow gel fibers | spheroid hollow fiber | S-34 | 138 | |
ZE2P27 | Effect of side chain length of pH-responsive polymer to form unimolecular micelles on micell formation | unimoleculer micelle pH-responsive polymer micelle formation | S-34 | 525 | |
ZE2P28 | Development of polyvinylamine derivatives with phase transition for absorption of carbon dioxide | carbon dioxide phase transition vinylamine-containing polymer | S-34 | 604 | |
ZE2P29 | Adsorption and desorption properties of metal ions using NIPA-PVA-semi-IPN gels | thermosensitivity gel metal ion adosoption | S-34 | 592 | |
ZE2P30 | Adsorption Behavior of Pd(¶) Using Temperature-Responsive Copolymer Gels | temperature-swing adsorption polymer gel palladium | S-34 | 606 | |
ZE2P31 | Preparation of magnetite nano particles in hydrogel | nanoparticle magnetite hydrogel | S-34 | 589 | |
ZE2P32 | The synthesis of the composite ferrite magnetic particles | ferrite composite particle solvothermal synthesis | S-34 | 1014 | |
ZE2P33 | Synthesis of Cu2ZnSnS4 (CZTS) nanoparticles | CZTS nanoparticles synthesis method characterization | S-34 | 900 | |
ZE2P34 | Synthesis and morphology control of mesoporous silica particles by using cationic surfactants | mesoporous silica particle morphology control cationic surfactant | S-34 | 338 | |
ZE2P35 | Preparation for nickel nanoparticles using spray blend system | Nickel nanoparticle Spray nozzle Blend system | S-34 | 663 | |
ZE2P36 | Preparation of water-soluble gold nanoparticles and their effect on microorganisms | nanoparticle microorganism | S-34 | 969 | |
ZE2P37 | One-pot synthesis of catalytic gold nanoparticles coated with porous silica shell | gold nanoparticle porous silica | S-34 | 271 | |
ZE2P38 | Formation Mechanism of SiO2@Au Core-Shell Nanoparticles in Microspace | Microreactor SiO2@Au Core-Shell Nanoparticles Formation Mechanism | S-34 | 245 | |
ZE2P39 | A study on synthesis of Gd complex-immobilized SiO2 composite nanoparticles for diagnostic imaging | Gd complex nanoparticle silica | S-34 | 129 | |
ZE2P40 | Electric field induced self-assemblies of organic-inorganic composite particles with anisotropic shapes | anisotropic particles external electric field configuration control | S-34 | 272 | |
ZE2P41 | Mechanism of Particle Formation with Fine Structures in Gel by a Reaction-diffusion System | Particle Growth Pattern Formation Reaction-Diffusion | S-34 | 361 | |
ZE2P42 | Synthesis of nanometer-sized, monodisperse polymer particles in aqueous polymerization at low surfactant concentrations | monodisperse polymer nanoparticle aqueous polymerization ionic surfactant | S-34 | 131 | |
ZE2P43 | Evaluation of dispersion of Silicon dioxide in organic solvents using Hansen solubility parameter | Hansen solubility parameter Silicon Dioxide Dispersion | S-34 | 864 | |
ZE2P44 | Charge reversal of latex particles in the presence of a strong cationic polyelectryte | charge reversal polyelectrolyte electrophoresis | S-34 | 787 | |
ZE2P45 | EHD effect and electrode surface of various electrode materials | Electrohydrodynamics electrode material electrode surface | S-34 | 594 | |
ZE2P46 | A study on synthesis of platinum-immobilized titania nanoparticles | platinum nanoparticle electroless metal plating | S-34 | 127 | |
ZE2P47 | Effect of Ca ions in organic matter decomposition of water using TiO2 photocatalyst | Water purification Photocatalyst Titanium dioxide | S-34 | 873 | |
ZE2P48 | Quality assessment of the environmental clean-up photocatalystic composite film by a mechanical coating method | photocatalyst titanium dioxide methylene blue | S-34 | 311 | |
ZE2P49 | Development of alumina films crystallized at low temperature | alumina film crystallization | S-34 | 268 | |
ZE2P50 | Fabrication of barium titanate/polymer nanocomposite films with high permittivity | Nanoparticle Dielectric constant Polymer thin film | S-34 | 270 | |
ZE2P51 | Photo-luminescence measurement during drying of graphite/dye dispersion polymer films | drying photo-luminescence stacking | S-34 | 40 | |
ZE2P52 | Aqueous synthesis of ZIF-8 using zinc acetate | zeolitic imidazolate framework morphology control aqueous system | S-34 | 424 | |
ZE2P53 | Changes of water durability influence on structure of glass network by the addition of CuO toward V2O5-MnO2-KPO3 lead-free glasses | Lead-free Water durability CuO | S-34 | 788 | |
ZE2P54 | Synthesis and characterization of ZIF-8 from ZnO | zeolitic imidazolate framework mechanochemical synthesis solvent-free | S-34 | 422 | |
ZE2P55 | Sealing, transmittance, and structural properties influence on a component Al2O3 into the Li2B4O7-BaO-P2O5-Al2O3 lead-free glasses | Lead-free Transmittance Sealing | S-34 | 872 | |
ZE2P56 | Recovery of butanol from an aqueous solution using a carbon gel microhoneycomb | BioButanol Carbon Gel Microhoneycomb | S-34 | 359 | |
ZE2P57 | The effects of surface modifications on the ion and organic adsorption performances of soft-templated ordered mesoporous carbons | Ordered mesoporous carbons Surface modification Ion and organic adsorption | S-34 | 423 |