Last modified: 2023-12-10 19:09:26
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall D, Day 1 | |||||
SY-54 [Symposium of Division of Fluid & Particle Processing] Advance in Powder Process 2023 | |||||
(9:20–10:20) (Chair: | |||||
D102 | Simulation analysis of particle flow pattern in a hopper for improving discharge flowability of particles with several tens of micrometer diameter | DEM simulation Micro hopper Particle flow pattern | SY-54 | 553 | |
D103 | Effect of Adhesion on Hopper Blockage by DEM | DEM Hopper Adhesion | SY-54 | 124 | |
D104 | DEM study on rolling resistance for irregular-shaped particles | DEM irregular-shaped particle rolling resistance | SY-54 | 162 | |
Break | |||||
(10:40–12:00) (Chair: | |||||
D106 | Analysis for the aggregation phenomenon during ball milling | simulation DEM ball mill | SY-54 | 914 | |
D107 | DEM-CFD simulation of particle and fluid behavior in a continuous rotary kiln | Rotary kiln Discrete Element Method Computational Fluid Dynamic | SY-54 | 484 | |
D108 | Investigating applicable range of coarse-grained DEM methods | Discrete element method Coarse-grained DEM Granular shear flow | SY-54 | 500 | |
D109 | Simulation analysis of the effect of smaller particle arrangement conditions on liquid fluid behavior in a smaller particle admixing slurry | admixing smaller particle slurry viscosity DNS simulation | SY-54 | 658 | |
(13:00–14:40) (Chair: | |||||
D113 | Effect of operating conditions on the agglomerate formation of fine powders in vibrating fluidized bed | vibrating fluidized bed agglomeration operating conditions | SY-54 | 345 | |
D114 | Evaluation method for flowability of granules depending on water content | Wet granules Flowability Liquid bridges | SY-54 | 750 | |
D115 | [Featured presentation] Effect of kneading conditions on particle dispersion in slurry of lithium-ion battery electrodes and redox flow batteries | Dispersion Adsorption Kneading | SY-54 | 751 | |
D116 | Quantitative analysis of wet kneading states by a compression test | kneading state compression pressure transmission | SY-54 | 231 | |
D117 | Experimental and Numerical Investigation of Fill Level and Binder Additive Ratio Effects in a Continuous Twin-screw Granulation | Twin-screw granulation Wet granulation Discrete element method | SY-54 | 417 | |
Break | |||||
(15:00–17:00) (Chair: | |||||
D119 | Evaluation of particle formation process during drying of colloidal droplet in the spray-drying method | Spray-drying method drying diffusion | SY-54 | 838 | |
D120 | Calculation of Ion-Particle Attachment Coefficient by Langevin Dynamics Method | Aerosol Charging Ion-Particle Attachment Coefficient Langevin Dynamics Method | SY-54 | 363 | |
D121 | Influence of pulse-jet cleaning pressure on performance of compact dust collector with pleated filter operated in clean-on-demand mode | Pulse-jet cleaning pressures Filtration performance Pleated filter | SY-54 | 419 | |
D122 | Fertilization of biomass combustion ash with low potassium concentration | Combustion ash Potassium Fertilizer | SY-54 | 600 | |
D123 | Synthesis of GIS/ANA composite zeolite using silica sludge waste and the cation adsorption properties | Silica waste Composite zeolite Cation adsorption | SY-54 | 714 | |
D124 | Evaluation of reaction characteristic between Ca(OH)2 powder and CO2 at high temperature | carbon dioxide calcium hydroxide calcium carbonate | SY-54 | 813 | |
Hall D, Day 2 | |||||
SY-55 [Symposium of Division of Fluid & Particle Processing] Bubble/Droplet/Particle Dispersion Engineering 2023 | |||||
(9:00–10:20) (Chair: | |||||
D201 | Investigation on mass transfer across the gas-liquid interface around acoustic cavitation | Acoustic cavitation Continuous Species Transfer Bubble | SY-55 | 254 | |
D202 | Neutralization of alkaline wastewater with suspended solids by carbon dioxide | Neutralization Carbon dioxide bubble Wastewater | SY-55 | 472 | |
D203 | The effect of the liquid-liquid interfacial tension on the motion of single bubbles rising across a liquid-liquid interface | Three fluids Bubble rise motion Numerical analysis | SY-55 | 679 | |
D204 | Effects of support materials on the stability of carbonic anhydrase with carbon dioxide-containing bubbles | carbonic anhydrase bubble column carbon dioxide | SY-55 | 739 | |
Break | |||||
(10:40–12:00) (Chair: | |||||
D206 | [Review lecture] Trends in Fine-bubble Technology on the basis of the Development of Bubble Generators | Ultra-fine bubble Bubble dynamics Bubble characterization | SY-55 | 163 | |
D208 | Collision phenomenon between droplets levitating on high-temperature surface | Leidenfrost droplet Droplet collision Ratchet | SY-55 | 579 | |
D209 | Effect of temperature conditions on droplet size distribution of slurry atomization by a rotating disk | Spray drying Rotating disk atomizer Droplet size distribution | SY-55 | 904 | |
(13:00–14:20) (Chair: | |||||
D213 | [Invited lecture] [The Outstanding Paper Award] Novel Hybrid Index for Identifying the Main Transition Velocities in Various Bubble Columns | Identification Bubble Columns Hybrid Indices | SY-55 | 190 | |
D215 | Preparation of O/W emulsion by double-cylinder rotary membrane emulsification | Membrane emulsification Rotating membrane Shirasu porous glass membrane | SY-55 | 915 | |
D216 | Numerical investigation of detachment mechanism of oil droplet from wall surface by microbubble | Microbubble Numerical simulation Interfacial tension | SY-55 | 942 | |
SY-56 [Symposium of Division of Fluid & Particle Processing] Frontiers in Mixing Technology 2023 | |||||
(14:20–15:20) (Chair: | |||||
D217 | Quantification of 3-D turbulent flow conditions in a stirring blade turning space using Tomographic stereo PIV | mixing turbulence Tomographic-stereo PIV | SY-56 | 495 | |
D218 | Measurement of 3D flow patterns with TS-PIV in a stirring blade turning space in transitional regime | mixing transitional regime tomographic-stereo PIV | SY-56 | 337 | |
D219 | Relation between clearance of two stage impellers and flow state in a vessel with pitched paddle impeller using CFD | CFD Pitched paddle impeller Flow state | SY-56 | 394 | |
(15:20–16:20) (Chair: | |||||
D220 | Eccentric mixing with small diameter ratio of impeller and vessel | Eccentric mixing Mixing performance | SY-56 | 404 | |
D221 | Prediction of power number and flow pattern in a horizontal cylindrical mixing tank by CFD | Horizontal cylindrical tank CFD VOF | SY-56 | 630 | |
D222 | Effect of cylindrical baffle size and configuration on power consumption in a stirred tank | Cylindrical baffle power consumption turbulent mixing | SY-56 | 320 | |
Hall D, Day 3 | |||||
(9:00–10:20) (Chair: | |||||
D301 | Unique phenomena in different viscosity mixing and application of large paddle impellers | Mixing Streak Line Different Viscous Fluid | SY-56 | 11 | |
D302 | Effect of swirl diameter and blade width of a swing-based mixing impeller on mixing of non-Newtonian fluids | Mixing Swing-based mixing impeller Non-Newtonian fluids | SY-56 | 318 | |
D303 | Mixing performance of continuous stirred tank with eccentric mixing | Continuous stirred tank Eccentric mixing Mixing performance | SY-56 | 426 | |
D304 | CFD-PBM analysis of agiattion and volumetric mass transfer coefficient in a wide range of aeration and agitation conditions | CFD Aerated stirred tank mass transfer | SY-56 | 497 | |
(10:40–12:00) (Chair: | |||||
D306 | Particle concentration distribution in solid-liquid mixing with HS600 impeller | solid-liquid mixing Particle concentration distribution | SY-56 | 402 | |
D307 | Measurement of particle dispersion of solid-liquid mixing with Maxblend using electrical resistance tomography | tomography solid-liquid mixing Maxblend impeller | SY-56 | 405 | |
D308 | Drawdown characteristics of light particles considering baffles | Light particles Drawdown mechanism Baffled stirred tank | SY-56 | 920 | |
D309 | Study for optimal demulsification method by microwave irradiation and stirring | microwave demulsification mixing | SY-56 | 176 | |
(13:00–14:40) (Chair: | |||||
D313 | [Review lecture] The flow behavior of liquid two-phase systems in microfluidic channels | microfluidic cannel liquid-liquid system interface | SY-56 | 682 | |
D315 | Development and Evaluation Mixing Performance of New Type Large Paddle Impeller GD220 | Mixing New type impeller Power Correlation | SY-56 | 5 | |
D316 | Development of Impellers for Evaporation and Concentration Processes | Mixing Evaporation Concentration | SY-56 | 82 | |
D317 | Development of a new type of blade for agitation and mixing under small power input | agitation mixing multiphase flow | SY-56 | 319 | |
(15:00–16:00) (Chair: | |||||
D319 | Effects of operating conditions of mixing on overall reaction rate constant of neutralization reaction in acid-base simultaneous addition | mixing neutralization reaction reaction rate constant | SY-56 | 275 | |
D320 | Clarification of flow dominant factors in the salt coagulation process based on the toque variation | Coagulation process torque flow state | SY-56 | 850 | |
D321 | Effect of agitation operation on size change in air bubble/fat globule of ice cream with freezing | Ice cream Agitation Freezing | SY-56 | 391 | |
(16:00–17:00) (Chair: | |||||
D322 | Effect of geometry on mixing performance of helical pipe type static mixer | Mixing Static Mixer Helical Pipe | SY-56 | 297 | |
D323 | Measurement of residence time distribution in a twin-screw extruder and comparison with 2.5D computational fluid dynamics results assuming Hele-Shaw flow | extruder residence time simulation | SY-56 | 158 | |
D324 | Investigation on mixing of highly viscose fluid by twin-screw stretcher | Highly viscose fluid Twin-screw stretcher Mixing | SY-56 | 901 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 54th Autumn Meeting (Fukuoka, 2023)