Japanese page RELOAD
SCEJ

SCEJ 54th Autumn Meeting (Fukuoka, 2023)

Last modified: 2023-12-10 19:09:26

Session programs : SY-52

The preprints(abstracts) are now open (Aug. 28). These can be viewed by clicking the Paper IDs. The ID/PW sent to the Registered participants and invited persons are required.

SY-52 [Symposium of Division of Fluid & Particle Processing]
Cutting Edge Technologies for Transport Phenomena and Fluid Engineering 2023

Organizers: Misumi Ryuta (Yokohama Nat. Univ.), Nagatsu Yuichiro (Tokyo Univ. of Agri. and Tech.), Hidema Ruri (Kobe Univ.), Shoji Eita (Tohoku Univ.), Masuda Hayato (Osaka Metropolitan Univ.), Kaide Aya (Yamaguchi Univ.), Kanai Yugo (Fukuoka Univ.), Uchihashi Yusuke (Sumitomo Chemical)

It is extremely important to clarify heat, mass, and fluid transfer phenomena that occur in chemical equipment in the design and operation of chemical processes. In recent years, advanced measurement techniques and the development of numerical simulation techniques have made it possible to approach complex transport phenomena. In this symposium, we will focus on problems related to transport phenomena such as multi-phase flow, turbulent flow, reaction flow, and non-Newtonian fluids. We will also discuss the developed chemical equipment and processes that apply them, and discuss the future prospects of thermo-mechanical fluid engineering. The movies used in the presentations can be applied for "the Particle and Fluid Process Committee Video Award. The organizers encourage the presenters to use movies in their presentations so as to make the comprehension of the audience deeper.

Hall B, Day 1

TimePaper
ID
Title / AuthorsKeywordsTopic codeAck.
number
Hall B(842), Day 1(Sep. 11)
(8:40–10:20) (Chair: Hidema Ruri, Masuda Hayato)
8:409:00B100Analysis of the Mechanisms of Stress-Induced Crystallization in 1,4-cis-polyisoprene Melts using Coarse-Grained Molecular Dynamics Simulation
Molecular Dynamics Simulation
Elastomer
Crystallization
SY-52166
9:009:20B101Hyper Elasticity Simulation and Expansion to Crack Growth under Biaxial Elongation by TL-SPH Method
Total Lagrangian SPH
Hyper Elasticity
Biaxial Elongation
SY-52408
9:209:40B102Viscous fingering in partially miscible system with a microcell
Microcell
Partially miscible system
Viscous fingering
SY-52967
9:4010:00B103Visualization of an entry flow of spherical particle suspensions into a capillary under pressure-oscillating field
flow
suspension
SY-52921
10:0010:20B104Effect of particle surface states on the viscosity behavior of porous hollow particles slurry
Porous hollow particle
slurry
shear thickening
SY-52475
10:2010:40Break
(10:40–12:00) (Chair: Nagatsu Yuichiro, Uchihashi Yusuke)
10:4011:00B106Effects of polymer solution concentration on fitting parameters characterizing local viscosity distribution measured by optical tweezers
Optical tweezers
Polymer solution
microrheology
SY-52303
11:0011:20B107The effects of Zeta potential of polystyrene particles on their migration behavior
Zeta potential
Migration
Polystyrene particle
SY-52357
11:2011:40B108Effects of contraction ratio on flow regimes of polyethyleneoxide solution in consecutive abrupt contraction-expansion microchannels
Elastic Instability
Microchannel
Polymer Scission
SY-52349
11:4012:00B109Effect of rheological properties on representative velocity scale of Rayleigh-Bénard convection in Carreau model fluid systems
Rayleigh-Benard convection
Carreau model fluid
Velocity scale
SY-52477
(13:00–15:20) (Chair: Misumi Ryuta, Kaide Aya)
13:0013:20B113Dynamic analysis of dispersion of Pt/C particles in mixed ionomer solution in shear flow field
slurry
rheology
polymer electrolyte fuel cell
SY-52470
13:2013:40B114Dominant factors of mean shear rate in the vessel of planetary centrifugal mixer
Heat balance equation
Centrifugal force
Revolution and rotation
SY-52964
13:4014:00B115Flow behavior of fluid pillar of alumina slurry in a capillary tube
Yield stress
Wall wetting
Capillary flow
SY-521024
14:0014:20B116Numerical simulation of precipitate-forming reactive flow with precipitate dissolution in porous media
(TUAT) *(Stu)Noguchi Souta, (Reg·PCEF)Suzuki Ryuta, (Reg)Nagatsu Yuichiro
simulation
precipitatation
flow
SY-521018
14:2014:40B117Numerical simulation of a jet for uroflowmetry
uroflowmetry
CFD
Axis-switching
SY-52180
14:4015:00B118Simulation of Natural Convection in a Glass Melter for High-Level Liquid Waste Treatment
molten glass
natural convection
CFD
SY-52181
15:0015:20B119Numerical modeling of solid-gas-liquid-liquid four-phase flow and its experimental validation
Four-phase flow
Contact angle
Validation
SY-52202
15:2015:40Break
(15:40–17:40) (Chair: Shoji Eita, Kanai Yugo)
15:4016:00B121Characteristics of flow transition in liquid-liquid two-phase Taylor-Couette flow with axial flow
Taylor-Couette flow
Liquid-liquid two-phase
Flow mapping
SY-52416
16:0016:20B122Numerical analysis of falling drying rate period in spray drying process
Spray drying
Computational fluid dynamics
Reaction engineering approach
SY-52421
16:2016:40B123Numerical Simulation of Water Vapor deposition Process on Condenser in Freeze-Dryer
freeze-drying
water vapor
CFD
SY-52135
16:4017:00B124Thermal solution for semiconductor devices by a flat laminate vapor chamber
Flat laminate vapor chamber
thermal solution
semiconductor devices
SY-52512
17:0017:20B125The effect of the contact angle on the freezing process of a water drop on a cold plate
Freezing process
Drop
Numerical analysis
SY-52676
17:2017:40B126Effect of water-repellent treatment of heating surface on the flow characteristics of a Leidenfrost droplet
Leidenfrost droplet
Water-repellent surface
Leidenfrost temperature
SY-52316
DispCtl: Preferences

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 54th Autumn Meeting (Fukuoka, 2023)


© 2023 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact Organizing Committee of SCEJ 54th Autumn Meeting
E-mail: inquiry-54fwww4.scej.org