Japanese page
SCEJ

SCEJ 83rd Annual Meeting (Osaka, 2018)

Last modified: 2018-02-27 10:00:00

Hall and day program : Hall D

The abstracts can be viewed by clicking the Paper IDs.
The ID/PW printed on the PROGRAM book are required.
(The ID/PW have also been sent to the Early-bird registrees and invited persons by e-mail.)

Hall D(1F 2102)

Hall D, Day 1 | Hall D, Day 2 | Hall D, Day 3
HC-12 | 2

TimePaper
ID
Title / AuthorsKeywordsTopic codeAck.
number
Hall D(1F 2102), Day 1(Mar. 13)
HC-12 Challenge toward Net Emission Zero Using 100% Renewable Energy in Residential and Commercial Sectors
(13:00–16:20) (Chair: Hasegawa Takuya)
13:0013:20D113Introduction of Phase II activity in committee on future energy and social systems
(Waseda U.) (Reg)Nakagaki Takao

HC-12793
13:2014:00D114[Requested talk] Current Situation and Actions for Realizing Net Zero Energy Building
(Nikken Sekkei) Niwa Eiji

HC-12794
14:0014:40D116[Requested talk] Cost reduction potential of photovoltaic power generation
(U. Tokyo) (Reg)Sugiyama Masakazu

HC-12795
14:4015:00Break
15:0015:40D119[Requested talk] Implementation of hydrogen and fuel cell technologies as methods to reduce CO2 emissions
(Technova) Watanabe Takahiro

HC-12797
15:4016:20D121[Requested talk] Development Trend of Redox Flow Battery for Energy Storage
(Sumitomo Electric Ind.) (Cor)Shigematsu Toshio

HC-12798
(16:20–17:00) (Chair: Koyama Michihisa)
16:2017:00General discussion
Hall D(1F 2102), Day 2(Mar. 14)
2. Fluid & particle processing
(9:00–10:40) (Chair: Saeki Takashi, Yamamoto Takuya)
9:009:20D201Numerical simulation on transport phenomena of natural convection in an enclosed horizontal rectangular container
(Ibaraki U.) *(Reg)Inagaki Terumi, Kubota Kenta
Natural convection
Transport phenomena
Numerical simulation
2-a238
9:209:40D202Effect of viscosity distribution on heat transfer characteristics of Taylor-Couette flow in non-Newtonian fluid system
(U. Shizuoka) *(Reg)Masuda Hayato, Shimoyamada Makoto, (Kobe U.) (Reg)Ohmura Naoto
Taylor-Couette flow
non-Newtonian fluid
Heat transfer
2-a600
9:4010:00D203Perforated Plate Design and Installation Position for Uniform Flow in the Honeycomb
(Fukuoka U.) *(Reg)Uchiyama Hiroki, Hada Takumi, Tanaka Sayaka, Awakihara Hideyuki, (Reg)Matsukuma Yousuke
Velocity Distribution
Pressure loss
CFD
2-a552
10:0010:20D204Relation between polymer behavior and turbulent vortex motion in wall turbulence
(Yokohama Nat. U.) *(Reg)Takagi Youhei, Nakata Aki
Polymer
Drag Reduction
Turbulent Flow
2-a180
10:2010:40D205Sediment prevention technique and stability of magneto rheological fluid
(Yamaguchi U.) *(Reg·PCEF)Kaide Aya, (Reg)Saeki Takashi, (Cosmo Oil Lubricants) Kanda Makoto, Tochigi Hiroshi
slurry
stability
MR Fluid
2-a438
(10:40–12:00) (Chair: Takagi Youhei, Masuda Hayato)
10:4011:00D206Development of a new numerical model of acoustic streaming induced by ultrasonic cavitation
(Tohoku U.) *(Reg)Yamamoto Takuya, Fang Yu, Komarov Sergey
Acoustic streaming
Numerical simulation
Ultrasound
2-a437
11:0011:20D207Measurement and visualization of thickness distribution of nano-film by developing phase-shifting ellipsometer
(Tohoku U.) *(Reg)Shoji Eita, (Stu)Yonemura Tatsuya, Komiya Atsuki, (Reg)Kubo Masaki, (Reg)Tsukada Takao
ellipsometry
phase-shifting technique
thickness measurement
2-a146
11:2011:40D208Evaluation of mixing characteristics for static mixers by visualization measurements
(Yamaguchi U.) *(Reg)Saeki Takashi, (Reg·PCEF)Kaide Aya, (Isel) Mochizuki Noboru
Static Mixer
Mixing
Evaluation
2-b21
11:4012:00D209Effects of edge thickness of blades on power consumption with Rushton turbines
(Fukuoka U.) *(Reg)Suzukawa K., (Stu)Kawasaki N., (Stu)Kitayama N., (Reg)Kanai Y.
power consumption
edge thickness of blades
Rushton turbine
2-b675
(13:00–15:00) (Chair: Suzukawa Kazumi, Ohta Mitsuhiro)
13:0013:20D213simulation-based optimization of gas dispersion by comparing agitation power in mixing tank
(Sumitomo Metal Mining) *(Cor)Homma Takehide, (Cor)Naito Motoyuki
gas-liquid mixing tank
CFD simulation
agitation power
2-b515
13:2013:40D214Development of MILDrum(R) for reduction of calorific value variation rate
(JGC) *(Reg)Kumagami Manabu, (Reg)Sun Chen, (Reg)Adachi Osamu, (Reg)Kamiya Atsushi
mixing
2-b405
13:4014:00D215Prediction of terminal rise velocity of single bubble considering an enhancement effect of external force on bubble surface fluctuation
(Yamaguchi U.) *(Reg)Nakao K., (NIT Oshima) (Reg)Furumoto K.
Single bubble velocity
Bubble surface fluctuation
External force
2-d92
14:0014:20D216Fine bubble generation by vertical and Horizontal vibration
(Fukuoka U.) *(Reg)Uchiyama Hiroki, Watanabe Marina, Minemoto Sayaka, (Reg)Matsukuma Yousuke, Tachibana Katsuro, Watanabe Akiko
Fine bubble
Bubble diameter distribution
vibration
2-e654
14:2014:40D217Numerical Simulation for Generation Mechanism of Ultrafine Bubble by High-speed Stirring
(Fukuoka U.) *(Reg)Matsukuma Yosuke, (Reg)Uchiyama Hiroki, Tachibana Katsuro, Watanabe Akiko
Ultrafine Bubble
Lattice Boltzmann Method
Numerical Simulation
2-e25
14:4015:00D218Prediction of particle number of aggregates through bubble size measurement under microwave irradiation
(U. Hyogo) Nishijima Shunsuke, Wada Yuki, *(Reg)Asakuma Yusuke
microwave
bubble formation
aggregate
2-e120
(15:00–16:40) (Chair: Sakai Mikio)
15:0015:20D219Effect of Viscosity Ratio on Shear-induced Deformation and Breakup of a Drop in Viscous Liquids
(Tokushima U.) *(Reg)Ohta Mitsuhiro, Ueta Tetsuya
Shear flow
Drop breakup
Viscosity ratio
2-e360
15:2015:40D220Verification of CFD Prediction Accuracy of Erosion Rate for Engineering Applications
(JGC) *(Reg)Qian Shaoxiang, (Cor)Kanamaru Shinichiro
Erosion Rate
Multi-phase Flow
Particle
2-e147
15:4016:00D221Analysis of rheological properties of solid-liquid-liquid three-phase particle dispersion
(Hiroshima U.) *(Reg)Ishigami Toru, Tokishige Chisato, (PCEF)Anzai Kazuma, (Reg)Fukasawa Tomonori, (Reg)Fukui Kunihiro, (Reg)Kihara Shin-ichi
Rheology
Capillary suspension
Structure formation
2-e123
16:0016:20D222Effect of food additives on drying of egg white in a spouted bed
(Kagoshima U.) *(Reg)Nakazato T., (Stu)Hamahata N., (Reg)Kai T.
egg white powder
spouted bed drying
defluidization
2-c796
16:2016:40D223Analysis for the particle breakage behavior of wet ball milling
(Tohoku U.) (Stu)Kushimoto Kizuku, (Reg)Ishihara Shingo, *(Reg)Kano Junya
ADEM
CFD
Breakage
2-f224
(16:40–17:00) (Chair: Suzuki Hiroshi)
16:4017:00D224[The SCEJ Award for Outstanding Research Achievement] Characterization and Control of Electrostatic Charging of Particulate Materials
(Kyoto U.) (Reg)Matsusaka Shuji
The SCEJ Award for Outstanding Research Achievement
0-b805
Hall D(1F 2102), Day 3(Mar. 15)
(9:00–10:20) (Chair: Yokokawa Yoshihiro, Ishigami Toru)
9:009:20D301Correlation analysis between compaction behavior of granular beds and their physical properties
(Toyota Central R&D Lab.) *(Cor)Yokota Maria, (Cor)Tani Masaaki, (Reg)Nakamura Hiroshi
granular matter
uniaxial compression test
2-f516
9:209:40D302Rheological Analysis of Moist Powder by Rheometer Assembled with Powder Fixture
(Toyota Central R&D Lab.) *(Reg)Nakamura Hiroshi, (Cor)Hiruta Osamu, (Cor)Kusano Takumi, (Cor)Ishii Masahiko, (Cor)Tani Masaaki
Rheology
Moist powder
Viscoelasticity
2-f470
9:4010:00D303Correlation between shear property and solvent distribution of wet powder
(Toyota Central R&D Lab.) *(Cor)Kusano Takumi, (Cor)Tani Masaaki, (Cor)Akimoto Yusuke, (Cor)Hiruta Osamu, (Cor)Matsunaga Takuro, (Reg)Nakamura Hiroshi
wet powder
shear test
microscope
2-f497
10:0010:20D304Simulation analysis of the force transmission of fine powder by SDEM
(Shiseido) *(Reg)Yokokawa Yoshihiro, (Reg)Tanaka Aya, (Prometech Software) (Reg)Yamanoi Mikio, (Tsukishima Kikai) (Cor)Nakata Yoichi, (Hosokawa Micron) (Cor)Sasabe Shuji
SDEM
force
simulation
2-f16
(10:20–12:00) (Chair: Fukasawa Tomonori, Yamanoi Mikio)
10:2010:40D305SDEM simulation with non-slip capillary force model
(Prometech Software) *(Reg)Yamanoi Mikio, (Tsukishima Kikai) (Cor)Nakata Yoichi, (Shiseido) (Reg)Tanaka Aya, (Reg)Yokokawa Yoshihiro
SDEM
powder
simulation
2-f62
10:4011:00D306Behavior analysis of fine powder, considering wetting characteristics by SDEM
(Prometech Software) *(Reg)Yamanoi Mikio, (Tsukishima Kikai) (Cor)Nakata Yoichi, (Hosokawa Micron) (Cor)Sasabe Shuji, (Shiseido) (Reg)Tanaka Aya, (Reg)Yokokawa Yoshihiro
SDEM
powder
simulation
2-f15
11:0011:20D307Comparison of DEM simulation and experiment of indirect heat transfer phenomenon in the low and medium temperature range of the granular packed bed
(Tsukishima Kikai) *(Cor)Nakata Yoichi, (Prometech Software) (Reg)Yamanoi Mikio
Discrete element method
Thermal transfer
Packed bed
2-f434
11:2011:40D308(withdrawn)

100689
11:4012:00D309Electrophoretic classification based on differences in electrophoretic mobility caused by changing in applied electric field
(Hiroshima U.) *(Reg)Fukasawa T., (PCEF)Ono K., (Reg)Ishigami T., (Reg)Fukui K.
classification
electrophoresis
applied electric field
2-f506

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 83rd Annual Meeting (Osaka, 2018)


© 2023 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact SCEJ 83rd Annual Meeting Organizing Committee
E-mail: inquiry-83awww3.scej.org