Japanese page RELOAD
SCEJ

SCEJ 84th Annual Meeting (Tokyo, 2019)

Last modified: 2019-03-12 11:30:00

Hall and day program : Day 1

The preprints(abstracts) can be viewed by clicking the Paper IDs.
The ID/PW printed on the PROGRAM book are required.
(The ID/PW have also been sent to the Earlybird registers and invited persons by e-mail.)
The programs of HC-13, HC-17, K-1 were updated.

Day 1(Mar. 13)

Hall A | Hall E | Hall F | Hall G | Hall H | Hall I | Hall P | Hall Q | Hall S | Hall T | Hall Z
HC-11 | 4 | 7 | 12 | 10 | HC-13 | PS-A | HC-14 | 5 | X-51 | Opening Ceremony | 0-a | CS-1

TimePaper
ID
Title / AuthorsKeywordsTopic codeAck.
number
Hall A(ClassRm. & Admin. Bldg. 3F 301)
HC-11 Challenge for 80% GHG Reduction by Industrial Decarbonization with Carbon Recycling and Sequestration Technologies
(13:10–16:20) (Chair: Nakagaki Takao)
13:1013:20Opening remark
(Waseda U.) (Reg)Nakagaki Takao
13:2014:00A114[Invited lecture] Challenges for Global Warming Mitigation by the Steel Industry
(Nippon Steel & Sumitomo Metal) (Cor)Murakami Hideki
GHG emission reduction
HC-111500
14:0014:40A116[Invited lecture] Present status and outlook of the technologies for CO2 reduction, storage, utilization in concrete sector
CO2 SUICOM
HC-111502
14:4015:00Break
15:0015:40A119[Invited lecture] CO2 emission reduction and carbon recycle energy system
(IAE) (Reg·PCEF)Sakai Susumu
CCUS
HC-111501
15:4016:20A121[Invited lecture] GHG reduction by utilizing unused resource
Unused resources
HC-111503
(16:20–16:50)
16:2016:50Panel discussion
(NIMS) (Reg)Koyama Michihisa
Hall E(ClassRm. & Admin. Bldg. 4F 403)
4. Separation processes
(13:00–14:40) (Chair: Matsuda Keigo)
13:0013:20E113The study of mass transfer measurement and analysis by total reflux condition in a packed distillation column
Distillation
Mass transfer
HETP
4-c972
13:2013:40E114Consideration of modeling of mass transfer in a process of packed column distillation.
Mass transfer
packed column distillation
modeling
4-c14
13:4014:00E115A comparison between discrete HIDiC and heat pump assisted distillation column
Energy-saving
HIDiC
4-c1072
14:0014:20E116Prediction Method of Efficiency for Distillation Column
efficiency
distillation column
prediction
4-c1449
14:2014:40E117Distillation Process Decision by Multi-component Distillation Computation
distillation process
multi-component
side-stream
4-c1464
(15:00–15:40) (Chair: Sotowa Ken-Ichiro, Sano Noriaki)
15:0015:20E119Numerical calculation of drying behavior of frozen materials in convective hot air dryer
drying
numerical analysis
freezing
4-h38
15:2015:40E120Development of the mixer type freeze dryer and drying examples of cryogenic grinding foods
freeze drying
vacuum drying
cryogenic grinding foods
4-h192
Hall F(ClassRm. & Admin. Bldg. 4F 404)
(13:00–13:20) (Chair: Iwata Masashi)
13:0013:20F113[The SCEJ Award for Outstanding Young Researcher] Evaluation and Prevention of Dynamic Biofouling Behavior on Reverse Osmosis Membrane Processes
The SCEJ Award for Outstanding Young Researcher
0-c1494
(13:20–14:40) (Chair: Nomura Mikihiro)
13:2013:40F114Evaluation of phase separation behavior of thermoresponsive morpholine derivatives and application for forward osmosis
morpholine
thermoresponsive
forward osmosis
4-a1060
13:4014:00F115Development of super high-strength hollow fiber membrane and flow analysis of membrane module
membrane
module
filtration
4-a11
14:0014:20F116Formation mechanism of the composite-like structure with ultrahigh permeation stability in TIPS-prepared membranes
Thermally induced phase separation
Membranes structure
Permeation stability
4-a1309
14:2014:40F117Reverse electrodialysis power generation system from salinity gradient: Enhancement of power output by scale-up and analysis of energy efficiency
Salinity Gradient Energy
Reverse Electrodialysis
Energy Efficiency
4-a1453
(15:00–16:20) (Chair: Seshimo Masahiro)
15:0015:20F119High-performance reverse osmosis membrane element
RO
membrane
spacer
4-a53
15:2015:40F120Desalination performance of nano-channel charged mosaic membranes prepared by ion-track graft polymerization method
Ion track graft polymerization
charged mosaic membrane
desalination
4-a1403
15:4016:00F121Facile creation of polyketone-based membrane with superior fouling resistant and releasing property for highly-efficient separation of comprehensive oil-in-water emulsions
polyketone
oil-water separation
zwitterionic copolymer
4-a1079
16:0016:20F122Facile modification of commercial PVDF membrane with poly(tetrafluoride ethylene-r-vinylpyrrolidone) for fouling tolerance and highly efficient separation of oil/water emulsion
amphiphilic copolymer
oil-water separation
microfiltration
4-a1046
Hall G(ClassRm. & Admin. Bldg. 4F 405)
7. Biochemical engineering
(13:00–13:40) (Chair: Umakoshi Hiroshi, Hoshino Yu)
13:0013:20G113Development of pemetrexed-hyaluronan conjugates for treatment of malignant pleural mesothelioma
hyaluronan
anti-cancer
drug conjugate
7-e1242
13:2013:40G114Development of intranasal vaccination using Solid-in-Oil technology
Intranasal vaccination
Drug delivery system
Nanodispersions
7-e1459
(13:40–14:40) (Chair: Wakabayashi Rie, Ohta Seiichi)
13:4014:00G115Simulation and assessment of monoclonal antibody production processes considering continuous manufacturing
Biopharmaceuticals
Process simulation
CHO cells
7-e1470
14:0014:20G116Elucidating proliferation signals of hematopoietic stem cells using motif-engineered receptors
chimeric receptor
signal transduction
motif engineering
7-e124
14:2014:40G117The effects of hepatocyte spheroid culture containing fragmented collagen microfibers on hepatocyte functions
collagen
tissue engineering
microfluidics
7-e1052
(15:00–16:20) (Chair: Kawahara Masahiro)
15:0015:20G119Pulverization of okara fiber by subcriticality
okara
subcriticality
Pulverization
7-h1308
15:2015:40G120High concentration protein refolding via microflow channel dialysis
protein
refolding
7-c1478
15:4016:00G121Development of electrophoretic analysis in supported lipid bilayer
Supported lipid bilayer
Electrophoresis
Lateral molecular interaction
7-c134
16:0016:20G122Investigation of blood cell passing and capture behavior using Metal Mesh Device
Cell separation
Microfluidic device
Membrane separation
7-c1437
Hall H(ClassRm. & Admin. Bldg. 4F 406)
12. Materials engineering & interfacial phenomena
(13:00–14:40) (Chair: Goto Muneharu, Nishiyama Norikazu)
13:0013:20H113Experimental and theoretical study of devolatilization process in twin screw extruder
Twin screw extruder
devolatilization
toluene
2-b21
13:2013:40H114Observation of phase separation structures in Cu-Co alloy by neutron computed tomography and correlation between phase separation structures and convection in molten alloy
neutron computed tomography
phase separation
Cu-Co alloy
12-m1114
13:4014:00H115Quantification of mixing state in solutions with Belousov-Zhabotinsky reaction
BZ reaction
mixing
quantification
12-m1367
14:0014:20H116Preparation of TiO2/Porous-carbon nanocomposites using the VLP-CVD technique and their photocatalytic activity
Porous material
Photo Catalyst
C
12-k1140
14:2014:40H117Self-healing corrosion protective coatings using nanofiber and zeolite
Self-healing
Corrosion
Nanofiber
12-k143
(15:00–16:00) (Chair: Yabuki Akihiro, Taki Kentaro)
15:0015:20H119Material recycle of CFRTP using colloidal techniques
CFRTP
Recycle
Colloidal Technique
12-k47
15:2015:40H120Improvement of production efficiency of HKUST-1 MOF by a spray-assisted synthetic process
Metal-organic framework
Continuous synthesis
Scale up
12-k1420
15:4016:00H121Development and Optimization Study of Long-Term Visibility Sign Sheet toward Road Setting
visibility
weather resistance
crisp printing
12-m1129
(16:00–17:00) (Chair: Tamura Kenji, Yamamoto Tetsuya)
16:0016:20H122Display of carboxy groups on an outermost surface of plastics via dip-coating of a synthetic polymer
polymer surface
surface segregation
surface functionalization
12-j1196
16:2016:40H123Using of follow fiber micro pore as enzyme immobilized bioreactor for esterification
Enzyme
immobilization
Polymer brush
12-j1143
16:4017:00H124Reaction selectivity on the oligomerization of aniline on vesicle interfaces
aniline
oligomerization
vesicle
12-k1479
Hall I(ClassRm. & Admin. Bldg. 4F 407)
10. Safety
(13:00–14:20) (Chair: Takeda Kazuhiro, Minamigawa Tadao)
13:0013:20I113Safe Preparation and Utilization of Highly Reactive Active Species I -Development and Applications of New Production Equipment for The Aqueous of Stabilized Hypochlorous Acid-
Hypochlorous Acid
pH Value
Effective Chlorine Concentration
10-h1145
13:2013:40I114Safe Preparation and Utilization of Highly Reactive Active Species II -Development and Applications of New Gas Phase Sterilization Equipment Using N2O4-NO2 System-
Gas Phase
Sterilization Equipment
N2O4-NO2 System
10-h1153
13:4014:00I115Safe Preparation and Utilization of Highly Reactive Active Species III -Development of New Sanitary Control Products with Chlorine Dioxide Derived from Simple and High Concentration Generation Mechanism-
Chlorine Dioxide
Deodorization Effect
Sterilization Effect
10-h1248
14:0014:20I116Study on autocatalytic decomposition of Dimethyl Sulfoxide (DMSO)
Dimethyl Sulfoxide
Autocatalyst
Decomposition
10-h1446
HC-13 2018 SCEJ Internship Meeting
(15:00–16:50) (Chair: Abiru Taisaku)
15:0015:10I119Opening Remark
(Kaneka) (Reg·SPCE)Yoshimi Tomoyuki
Internship
HC-1374
15:1015:50I120Company's internship program introduction
Internship
HC-1365
I121Company's internship program introduction
(Soken Chemical & Eng.) (Cor)Nakamura Ritsuko
Internship
HC-1366
15:5016:10I122Mentor's report
Internship
HC-1367
16:1016:50I123Intern's report
Internship
HC-1368
I124Intern's report
Internship
HC-1370
I125Intern's report
Internship
HC-1371
I126Intern's report
Internship
HC-1372
I127Intern's report
Internship
HC-1373
Hall P(Multi-Act. Bldg. 6F Foyer)
PS-A Poster Session A (System, info. & simulation, Supercritical, Energy)
(13:20–15:20) (Chair: Inasawa Susumu)
13:2015:20PA101Dynamic simulation and process assessment of cell cultivation modes in monoclonal antibody production
Biopharmaceuticals
Mammalian Cell Culture
Bioreactor
6-b1066
PA102Dynamic Analysis of Hydrogen Energy Carrier Production Systems Using a Fluctuation Protocol of Renewable Energy Electricity
Renewable Energy
Hydrogen Energy Carrier Production System
Fluctuation Protocol of Renewable Energy Electricity
6-c1322
PA103Design of propylene production process by propane dehydrogenation reaction using machine learning
machine learning
Design of experiments
6-e24
PA104Simulation and design of chromatography columns in monoclonal antibody purification
Biopharmaceuticals
Continuous manufacturing
Chromatography
6-b1163
PA105Application of target-based design to a chemical looping reforming process at a lowered temperature
(Tohoku U.) *(Stu)Ouchi K., (Reg)Guzman A., (Reg)Ohno H., (U. Tokyo) (Reg)Shimizu T., (Reg·APCE)Kikuchi Y., (Tohoku U.) (Reg)Yoko A., (Reg)Seong G., (Reg)Tomai T., (Reg)Adschiri T., (Reg)Fukushima Y.
chemical looping reforming
process simulation
methanol synthesis
6-b1293
PA106Numerical simulation for solid-fluid coupling problem
DEM-CFD method
Refined Grid Model
Local volume average
6-b1268
PA107Design of freezing processes for human induced pluripotent stem cells towards industrial manufacturing
Regenerative medicine
Numerical simulation
Multiobjective process design
6-b1166
PA108Adaptive soft sensor based on Gaussian process dynamical models for nonlinear and dynamic processes
soft sensors
process dynamics
nonlinearity
6-d23
PA109Sequential Alarm Analysis based on Time Stamped Alarm Data
sequential alarm
alarm system
chemical plant
6-f210
PA110Modeling and process assessment of batch and continuous manufacturing in API synthesis
Pharmaceuticals
Continuous manufacturing
Reactor
6-b1207
PA111Classification of 3D Transmission Electron Microscope by Deep Learning Methods
semantic segmentation
machine learning
3D-TEM
6-f1264
PA112Optimal Preview Controller for Improving Transient Response
Optimal Predictive Control
Model Predictive Control
6-d1094
PA113Lot-sizing in suspended filling processes of human induced pluripotent stem cells
hiPS cells
Regenerative medicine
Apoptosis
6-b1348
PA114Sensing method with electromagnetic wave for process control in chemical plant
millimeter wave
sensing
6-g1445
PA115Determination of solubilities of ibuprofen in supercritical carbon dioxide
solubility
supercritical carbon dioxide
ibuprofen
8-b1275
PA116Measurement and prediction of diffusion coefficients of phenol in mixture of carbon dioxide and methanol under high pressure by Taylor dispersion method
mixture of CO2 and methanol
diffusion coefficient
phenol
8-b1175
PA117Supercritical carbon dioxide dyeing for various synthetic resin buttons and modeling
Supercritical carbon dioxide
Supercritical dyeing
Synthetic resin buttons
8-b1471
PA118Retention behavior analysis of similar compounds in Supercritical fluid chromatography by Abraham model
carbon dioxide
supercritical fluid chromatography
Abraham model
8-c151
PA119Estimation of energy and mass balances of lipid extraction process from wet microalgae by using liquefied dimethyl ether
Liquefied dimethyl ether
Microalgae
Lipid extraction
8-c43
PA120Ultra-thin continuous crystalline tetracene film formation by temperature-driven supercritical fluid deposition
supercritical fluid
tetracene
thin film
8-c1283
PA121Recycling of carbon fiber reinforced plastic by superheated steam
carbon fiber reinforced plastic
superheated steam
decomposition
8-f139
PA122Phase study on vesiculation of Span/Tween system based on the hydrothermal emulsification
subcritical water
emulsification
vesicle
8-e1474
PA123Conversion of water-soluble low molecular organic compounds to useful substances by electrolysis in subcritical water
Hydrothermal
Electrolytic
Glycerol
8-d157
PA124Elucidation of decomposition behavior of organic materials by hydrothermal treatment
superheated steam
subcritical water
decomposition
8-d163
PA125Effects of reaction conditions on hydrolysis of filter paper in aqueous basic solution under hydrothermal conditions
filter paper
hydrolysis
basic solution
8-d1214
PA126Control of oxygenated functional groups on hydrothermal carbon
hydrothermal
carbonization
organic acid
8-e1381
PA127Fabrication of carbon composite aerogel by supercritical drying and application to CO2 battery
supercritical drying
carbon composite aerogel
CO2 battery
8-e1425
PA128Measurement and prediction of adsorption and desorption behaviors of VOCs under supercritical CO2 conditions for regeneration of activated carbon
supercritical carbon dioxide
activated carbon
volatile organic compound
8-c945
PA129Effect of solvent atmosphere on hydrothermal fixation of carbon dioxide in magnesium hydroxide and serpentinite
hydrothermal
fixation of carbon dioxide
serpentinite
8-d1026
PA130Decellularization of Porcine Dermal Cells by Liquefied Dimethyl Ether
Decellularization
Liquefied dimethyl ether
Scaffold
8-c60
PA131Kinetic study on hydrothermal citric acid leaching of lithium cobalt oxide
Separations
Metal recovery
Citric acid
8-d1169
PA132Effects of reaction conditions on defluorination of 4-fluoronitrobenzene in aqueous basic solution under hydrothermal conditions
hydrothermal
defluorination
aqueous basic solution
8-d1213
PA133Evaluation of the basicity of solid catalyst in hot compressed water using model reaction rate change influenced by acid poisoning
basicity
hot compressed water
solid catalyst
8-g1239
PA134Development of wastewater treatment technique by catalytic oxidation in superheated steam
superheated steam
catalytic oxidation
isopropanol
8-f934
PA135Fabrication of chitosan aerogel using supercritical drying for air dehydration application
chitosan aerogel
supercritical CO2
air dehydration
8-e1417
PA136Synthesis of Nano-Ceria with Low Temperature Catalytic Activity
nano ceria
solvothermal synthesis
hydrothermal synthesis
8-e1276
PA137Nanoparticle formation of cis isomerized lycopene by RESS process using supercritical CO2
Supercritical carbon dioxide
Cis-isomerized lycopene
RESS process
8-e25
PA138Elucidation of formation mechanism of metal oxide nanoparticle using supercritical mixed solvents
Supercritical
Nanoparticles
Barium titanate
8-d1068
PA139Fabrication of pharmaceutical composite using melting point depression in supercritical carbon dioxide
supercritical CO2
melting point depression
pharmaceutical
8-e1421
PA140Deposition process of drugs onto mesoporous silica materials using supercritical carbon dioxide
supercritical fluid deposition
drug delivery system
mesoporous silica
8-e203
PA141Effects of flow rates of carbon dioxide on the production of microparticles of sulfonamides (sulfathiazole) by supercritical antisolvent recrystallization in micro-space (SAS-MD)
Supercritical CO2
Micro device
Microparticles
8-e1238
PA142Effect of amine-type and imine-type additives on the morphology control in supercritical hydrothermal synthesis of zinc oxide nanoparticles
supercritical hydrothermal synthesis
zinc oxide
zinc complex
8-e1391
PA143Observation of Morphological Change of Ceria Nanoparticles by Supercritical Hydrothermal Treatment
Supercritical hydrothermal
Nanoparticles
8-e987
PA144Color tuning of carbon nanodots with solvothermal synthesis from phenylenediamine isomers
solvothermal synthesis
photoluminescence
carbon nanodots
8-e1082
PA145One-pot alcothermal synthesis of TiO2-Nb2O5 composite spherical porous nanomaterials producing solid or hollow morphology
Solvothermal synthesis
Nanoparticle
Porous
8-e1439
PA146Investigation on development of flow process for synthesizing organic-modified boehmite in hot and high-pressure water/octanoic acid system
continuous
crystal growth
organic modification
8-e948
PA147Evaluation of Thermo Power Wave based on 2-D materials
Thermopower wave
9-a1177
PA148Development of evaluation method and analysis of reaction mechanism in ammonia electrochemical synthesis using infrared spectroscopy
ammonia electrochemical synthesis
infrared spectroscopy
proton conducting solid electrolyte fuel cells
9-e1085
PA149Development of polymer electrolyte fuel cell systems using carbon alloy catalyst
carbon alloy catalysts
polymer electrolyte fuel cells
hybrid fuel cells
9-e1358
PA150Structural Analysis for effect of Li compounds addition on Mg(OH)2 reactivity
Spectroscopy
XRD
Li Compound Effect
9-b963
PA151Global chemical kinetic modeling for Sabatier reaction based on experimental results with a pressurized gas flow catalyst fixed bed reactor
CCU
Reactor design
Kinetic modeling
9-c1351
PA152Revealing the solid carbon reaction mechanism of carbon-air secondary battery system
Solid oxide fuel cell
Secondary battery
CO2 electrolysis
9-e1007
PA153Investigation of anode catalyst for hydrogen production by liquid ammonia electrolysis
liquid ammonia
electrolysis
hydrogen production
9-e1359
PA154Production and Characterization of thermoelectric conversion materials based on dimensionally controlled Fe2O3 nano rods
thermoelectric
Fe2O3
Nanorods
9-d1165
PA155Investigation of organic redox flow battery
organic
redox
battery
9-e1182
PA156Redox reaction kinetics, particle structures, and system design in three-reactor chemical-looping process using Ca-modified ilmenite as oxygen carrier.
Chemical-looping combustion
Hydrogen production
CO2 capture
9-e988
PA157Study on CO conversion from CO2 with Calsium Feraite
Calsium Feraite
Chemical Looping process
9-f1209
PA158Techno-economic analysis of hydrogen energy to improve electric grid stability in distributed energy system with solar cells
energy strage
distributed energy system
solar cell
9-e1045
PA159Performance of redox flow battery using KOH activated electrode
redox flow battery
KOH activation treatment
active sites
9-e1030
PA160Electrochemical Reaction of Ammonia Formation using Tungsten-Iron Catalyst with Proton-Conducting Solid Oxide Fuel Cell
Ammonia Electrosynthesis
Iron Based Catalyst
Electrochemical Promotion
9-e181
PA161Kinetic Study on Nitrate Composited Magnesium Oxide/Carbon Dioxide Chemical Heat Pump
magnesium oxide
carbon dioxide
chemical heat pump
9-b1092
PA162Study on dehydration reactivity and crystal structure of Ca(OH)2
Calcium hydroxide
Li doping
Chemical heat storage
9-b964
PA163Investigation of Power-to-gas Systems Utilizing Direct Methanation in Solid Oxide Electrolysis Cells
SOEC
methane
power-to-gas
9-e998
PA164Development of PdRu catalysts for formate oxidation in solid alkaline fuel cell
Solid alkaline fuel cell
Formate oxidation
Electrocatalyst
9-a1019
PA165Effect of Co and Fe proportions on the performance of material Pr0.4Sr0.6Co0.9-xFexNb0.1O3-d as cathode for SOFCs
SOFC
perovskite oxide
Performance
9-e128
PA166Investigation of highly efficient proton-conducting solid oxide fuel cells with multilayered electrolyte
proton conductor
SOFC
multilayered electrolyte
9-e930
PA167Investigation of Si/TiO2/Perovskite interfaces for tandem solar cells
tandem solar cell
perovskite
silicon
9-e1083
PA168Investigation of gasification kinetics of the coal and coke immediately after pyrolysis
coal
coke
gasification kinetics
9-c1342
PA169Development of anode catalysts for intermediate temperature fuel cells
intermediate-temperature fuel cell
phosphide electrode
cesium dihydrogen phosphate
9-e171
PA170Improved water management by structural control of PEFC cathode electrode using connected Pt-Fe catalyst
Carbon free
Polymer electrolyte fuel cell
Membrane electrode assembly
9-e1194
PA171Fabrication and characterization of electrochemical capacitor electrodes using reduced graphene oxide composites
reduced graphene oxide
supercapacitor
characterization
9-e1316
PA172Techno-economic analysis of newly designed solid oxide fuel cells
solid oxide fuel cell
metal-supported cell
cost engineering
9-e30
PA173Hydrogen sorption properties of MgH2-carbon nanotube composite
hydrogen storage
magesium hydride
carbon nanotubes
9-e1328
PA174Electric characterization of Si film for solar cell by nanostructure control and rapid vapor deposition
solar cell
Si film
Electric characterization
9-e1246
PA175Improving Heat Resistance of Electric Heating Alumite Carrier
Electric Heating
Alumite Carrier
Heat Resistance
9-f1032
PA176Detailed chemical kinetic modeling for conversion characteristics of sulfur compounds in an entrained flow coal gasifier
coal gasification
sulfur
simulation
9-c1105
PA177Fischer-Tropsch synthesis using waste iron nail-based catalyst for liquid fuel production from waste wood building materials
(Gifu U.) *(Stu)Ohashi R., (Reg)Kumabe K.
Fischer-Tropsch synthesis
Iron nail-based catalyst
Waste wood building materials
9-a1111
PA178Effects of structural control and heterophase formation on ion conductivity in75Li2S・P2S5 glass-ceramic electrolyte for all solid state lithium ion battery
composite solid electrolyte
lithium ion battery
glass-ceramics
9-e971
PA179Study on graphene oxide membrane as an electrolyte of a direct methanol fuel cell
graphene oxide
fuel cell
electrolyte membrane
9-e1041
PA180Electrochemical Passivation of Nano-Porous Silicon Solar Cell
Porous Silicon
Electrochemical Passivation
Solar Cell
9-e1044
PA181Process design of levulinic acid production from glucose in choline chloride aqueous solution
Levulinic acid
Aspen
Glucose
9-c992
PA182Development of methanol oxidation catalyst using reduced graphene oxide - TiO2 composite support
graphene oxide
fuel cell
electrocatalyst
9-e1031
PA183Fuel cell performance evaluation of thin pore-filling electrolyte membrane using ionomer having high density sulfonic acid group
Polymer electrolyte fuel cell
Pore-filling membrane
Low EW perfluorosulfonic acid polymer
9-e1228
PA184Study on hydrogen diffusion mechanism at interface between metal and proton conductor in solid oxide fuel cells
SOFC
proton conductor
Hydrogen-permeable metal membrane
9-e49
PA185Research on the Reverse Electrodialysis using non-Aquaous Solution
Reverse Electrodialysis
Nernst Potential
Ion exchange membrane
9-e967
PA186Measurement of Water Permeation through Polymer Electrolyte Membranes from Hydraulic Pressure to Atmospheric Pressure
Polymer Electrolyte Membrane
Water Permeation
Hydraulic Pressure
9-e122
PA187Analysis of catalyst layer for fuel cell using QCM
Fuel Cell
QCM
9-f1244
Hall Q(Multi-Act. Bldg. 2F Lounge)
HC-14 2018 SCEJ Internship Meeting Mixer
(17:00–18:30)
17:0018:30Certificate Presentation Ceremony
Hall S(Multi-Act. Bldg. 4F 401)
5. Chemical reaction engineering
Organized Session (Division of Chemical Reaction Engineering, CVD Reactions Section)
(16:00–17:20) (Chair: Kawase Motoaki, Miura Yutaka)
16:0016:20S122Preparation of TiO2 Thin Films on Plastics via Atmospheric-Pressure Plamsa-Enhanced CVD and Their Application in UV-Shielding Coatings
Atmospheric-pressure plasma
TiO2 thin film
UV-shielding
5-h1350
16:2016:40S123Development of polymer nanocoating process for CNTs using in-flight PECVD
PMMA
film
aerosol
5-h1267
16:4017:00S124Growth of Multi-Millimeter-Tall Single-Wall Carbon Nanotube Forests Using Fe/Gd/Al Catalysts
carbon nanotube
chemical vapor deposition
catalyst
5-h1399
17:0017:20CVD reaction subdivision encouragement award ceremony
Hall T(Multi-Act. Bldg. 4F 402)
X-51 The seminar of Fluid & Particle Processing Division
(13:30–14:30)
13:3014:20Divisional Meeting and Divisional Award Ceremony
14:2014:30Opening Remark
(Chair of the Fluid and Particle Processing Division) (Reg)Gotoh Kuniaki
(14:30–16:20) (Chair: Iwata Shuichi, Imanaka Teruo)
14:3015:10T118[Divisional Award] In-situ observation and numerical investigation of surface vortex formation and bubble entrainment during mechanical stirring
Mechanical stirring
Volume of Fluid
Surface vortex
X-5178
15:1015:50T119[Divisional Award] Flow Dynamics in Taylor-Couette Flow Reactor with Axial Distribution of Temperature
Taylor-Couette flow
heat convection
flow visualization
X-51941
15:5016:20T121[Divisional Award] Development and productization of high efficiency vertical motion culture apparatus "VMF Rector"
BioReactor
Animal cell culture , iPS cell culture
Mixing
X-51942
16:2016:30Break
(16:30–17:30) (Chair: Iwata Shuichi)
16:3017:30T123[Invited lecture] Dynamic Measurement of Micro Fluidics
Micro Fluidics
Dynamic Measurement
X-5158
(17:30–17:40)
17:3017:40Closing Remark
(Vice-chair of the Fluid and Particle Processing Division) (Reg)Shono Atsushi
Hall Z(Multi-Activity Bldg. 6F Lecture Hall)
Opening Ceremony
(9:00–10:40)
9:0010:40Opening remark
Chair of the SCEJ Kanto Branch (U. Tokyo) Sakai Yasuyuki
Presided over ceremony of newly honorary members
Greeting of the SCEJ-President
President of the SCEJ (Tohoku U.) Adschiri Tadafumi
Commendation ceremony
0-a The SCEJ Award
(10:40–12:00) (Chair: Goto Motonobu)
10:4011:20Z105[The SCEJ Award] Creation of Novel Field in Bioengineering Using Surface-active Molecules
The SCEJ Award
0-a1489
11:2012:00Z106[The SCEJ Award] Reaction Engineering Oriented for Environmentally Benign Chemical Technology
The SCEJ Award
0-a1490
CS-1 To Enhance the Significance of SCEJ's Presence -To Pursue Corroborations with Cookery Science and Food Engineering-
(13:00–14:00) (Chair: Kaminoyama Meguru)
13:0013:05Opening remark
(Functional Fluids) (Reg)Fujioka Keiko
13:0513:20Z113[Keynote lecture] Chemical Engineering for Cooking Science
Interdisciplinary exchange
CS-11255
13:2013:40Z114[Invited lecture] Microorganisms in the Fermentation Process of Miso (Japanese Soybean Paste)
Fermented Foods
CS-142
13:4014:00Z115[Requested talk] Effect of the quality of the salt in a pickled plum manufacturing process
Quality of the salt
Pickled plum
CS-135
(14:00–14:40) (Chair: Ichikawa Sosaku)
14:0014:20Z116[Invited lecture] Prediction and control of hardness of vegetables during cooking with water
prediction
vegetables
hardness
CS-11280
14:2014:40Z117[Requested talk] Relationship between Heat Transfer Mechanism and Cooking Quality During the Oven Heating of Food
Cookery Science and Food Engineering
Oven Heating
CS-11353
14:4015:00Break
(15:00–16:00) (Chair: Fujioka Keiko)
15:0015:20Z119[Requested talk] A human gastric digestion simulator for analysis of food digestion kinetics
Food digestion
Simulator
Human stomach
CS-11410
15:2015:40Z120[Requested talk] Kinetic analysis of lipid oxidation and anti-oxidation, and food design based on it
lipid oxidation
anti-oxidation
kinetic analysis
CS-1997
15:4016:00Z121[Requested talk] Possibility of the tailor made food design using computational swallowing simulator "Swallow Vision"
Simulation
Swallowing
Food design
CS-11338
(16:00–16:20) (Chair: Fujioka Keiko, Kaminoyama Meguru)
16:0016:20General discussion

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 84th Annual Meeting (Tokyo, 2019)


© 2023 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact SCEJ 84th Annual Meeting Organizing Committee
E-mail: inquiry-84awww3.scej.org