Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
ST-26 [Trans-Division Symposium] Novel Development in Batteries, Fuel Cells, Solar Cells and Other Energy Conversion/ Storage Technologies -From Nano Design to System Design- (Oral session) |
(10:00–11:00) (Chair: Kosaka Fumihiko) |
10:00– 10:20 | EG104 | Research for Steam and Carbon Dioxide Electrolysis using Solid Oxide Cells for Methane Synthesis and Prospect
| high temperature electrolysis methane synthesis SOEC
| ST-26 | 605 |
10:20– 10:40 | EG105 | Influence of transport properties in solid oxide fuel cells with proton-conducting lanthanum tungstate
| lanthanum tungsten oxide proton conductor SOFC
| ST-26 | 750 |
10:40– 11:00 | EG106 | Installation of carbon nanotube synthesis into solid oxide fuel cell
| solid oxide fuel cell carbon nanotube direct growth
| ST-26 | 736 |
(11:00–12:00) (Chair: Nakagaki Takao) |
11:00– 12:00 | EG107 | [Invited lecture] Development of Energy Systems using Hydrogen from Renewable Energy
| Renewable Energy Hydrogen Energy System High Temperature Electrolysis
| ST-26 | 704 |
(13:00–14:00) (Chair: Tsujiguchi Takuya) |
13:00– 13:20 | EG113 | Strategy for Suppressing Water Uptake in High IEC Anion Exchange Membranes with Thermally Convertible Polymer System
| Water uptake Solid alkaline fuel cells Aromatic backbone
| ST-26 | 931 |
13:20– 13:40 | EG114 | Engineering Palladium Nanocatalysts as High Efficient Anode Catalysts for Alkaline Direct Alcohol Fuel Cells (DAFCs)
| Alkaline Fuel Cell Anode Catalyst Ethanol Oxidation Reaction
| ST-26 | 512 |
13:40– 14:00 | EG115 | Design and synthesis of highly durable aromatic anion exchange membrane for solid-state alkaline fuel cell application
| Anion exchange membrane Fuel cell Molecular design
| ST-26 | 799 |
(14:00–14:40) (Chair: Oshiba Yuhei) |
14:00– 14:20 | EG116 | Analysis and current-voltage characteristic for air-oxidized electrode material of a redox flow battery
| Vanadium redox flow battery Air oxidation Reaction resistance
| ST-26 | 69 |
14:20– 14:40 | EG117 | Electrode designing for direct formic acid fuel cell using fibrous catalyst
| Direct formic acid fuel cell Mass transport Catalyst layer
| ST-26 | 221 |