Japanese page RELOAD
SCEJ

SCEJ 50th Autumn Meeting (Kagoshima, 2018)

Last modified: 2018-09-04 10:00:00

Hall and day program : Day 1

The abstracts can be viewed by clicking the Paper IDs.
The ID/PW printed on the PROGRAM book are required.
(The ID/PW have also been sent to the Earlybird registers and invited persons by e-mail.)

Day 1(Sep. 18)

Hall AA | Hall AB | Hall BA | Hall BB | Hall BC | Hall CA | Hall CB | Hall CC | Hall CD | Hall CE | Hall DA | Hall DB | Hall EA | Hall EC | Hall ED | Hall EE | Hall EG | Hall FA | Hall FB | Hall FC | Hall FD | Hall FE | Hall FF | Hall FG | Hall P | Hall P
SV-1 | SP-4 | SP-1 | SY-77 | SY-79 | SY-82 | SP-1 | SY-60 | SY-63 | ST-23 | ST-24 | SY-76 | ST-28 | SY-67 | SY-64 | ST-31 | SY-85 | ST-26 | SY-65 | SY-74 | SY-53 | SY-71 | SY-75 | SY-54 | SY-52 | SY-55 | ST-27

TimePaper
ID		Title / AuthorsKeywordsTopic codeAck.
number
Hall AA(Inamori Auditorium 2F Hall)
SV-1 Chemical Engineering Vision Symposium 3 - Digital Revolution to Realize the Future Plant
(10:00–12:00) (Chair: Yamashita Yoshiyuki, Ohmura Naoto)
10:00– 10:30AA104[Invited lecture] Digital Revolution and the Plant for the Near Future
Smart Plant
digitization
SV-11091
10:30– 11:00AA105[Invited lecture] Application and the Vision of Cyber Physical Systems for the Plant Operation
Cyber Physical Systems
Plant Operation
SV-11092
11:00– 11:30AA107[Invited lecture] Several Attempts in Mitsui Chemicals towards the Plant of the Next Generation
Future Plant
Digitization
SV-11093
11:30– 12:00General discussion
SP-4 [Special Symposium]
Technological Perspective and Issues for Realizing a Carbon-recycling Society - Activity Reports by Industrial Sector Exchange Committee at SCEJ Headquarter
(13:00–13:20) (Chair: Hayashi Jun-ichiro)
13:00– 13:20AA113[Requested talk] Summary report of activities of SCEJ Industrial Exchange Committee
Industrial Exchange Committee
Future Chemical Industries
Carbon recycling
SP-4662
(13:20–14:00) (Chair: Mae Kazuhiro)
13:20– 14:00AA114[Requested talk] Carbon resources utilization and chemical production in future carbon recycling society
Carbon recycling
Chemical production
Carbon resources
SP-4666
(14:00–15:20) (Chair: Hayashi Jun-ichiro)
14:00– 14:20AA116[Requested talk] Fuel cell technologies: Future perspective and challenges
Fuel cell
Coproduction
SOFC
SP-4674
14:20– 14:40AA117[Requested talk] Bioprocessing technologies: Future perspective and challenges
(Kyowa Hakko Bio) *(Reg)Hibi Kazuo, (Kimura Chemical Plants) (Reg)Ikeda Hirofumi, (Pokka Sapporo Food & Beverage) (Reg)Nakamura Takeshi, (Cosmo Eng.) (Reg)Morita Toshiharu
Bioprocessing
Chemicals production
Microbial fuel cell
SP-4683
14:40– 15:00Break
15:00– 15:20AA119[Requested talk] C1 Chemistry Technologies: Future Perspective and Challenges
C1 chemistry
CCU
Coproduction
SP-4690
(15:20–15:40) (Chair: Mae Kazuhiro)
15:20– 15:40AA120General discussion on perspective of chemical industries and challenges
Carbon recycling
Chemical industries
SP-4695
Hall AB(Inamori Auditorium 1F Lobby)
SP-1 [Special Symposium]
Challenge of Chemical Engineers for Social Implementation
(15:30–17:30)
15:30– 17:30CA101Challenges in innovation of chemical technologies: obstacles and keys for success identified from questionnaire
questionnaire
obstacles
drivers
SP-1893
CA102Conceptual Design of A System for Frequency Stabilization of Massively Installed Intermittent Renewable Energy Systems
Frequency Stabilization
Hydrogen Production
Battery
SP-1720
CA103Technoeconomic analysis of battery-assisted hydrogen production from renewable energy
Battery
Roadmap
off-grid
SP-1784
CA104Techno-economic analysis of lithium-air batteries considering mass transfer limitation
Lithium-air battery
Techno-economic analysis
Energy system
SP-1806
CA105Development of phosphorus fertilizer with 85% recovery rate and harmless residue from sludge ash
sludge ash
recovery of phosphorus
phosphorus fertilizer and free heavy metal
SP-1650
CA106Basic problems and measures toward establishment of rational methodology of process with complex fluids
Complex fluid
Process design
Numerical simulation
SP-1556
CA107Prospects for the proper food distribution by edible thermal energy storage
thermal energy storage
edible microcapsule
distribution
SP-1218
CA108Demonstration test of an SOFC Power Generation System
Carbon-Neutral
SOFC fuel cell
Biogas
SP-11012
CA109Availability of snow for cooling in urban area with heavy snowfall and its potential for load reduction of snow removal
renewable energy
snow storage
life cycle assessment
SP-11015
CA115Case study on introduction of biofuel production technology using ion-exchange resin catalyst on Tanegashima
biofuel production
introduction of new technology
ion-exchange resin
SP-11036
CA116The actual situation that is implementing OMICS-technology for oil refinery
Petroleomics
oil refinery
crude oil
SP-1116
CA117Proposal of cost-competitive distributed energy system using solar cells and hydrogen energy storage
solar cell
hydrogen
energy system
SP-1673
CA118A region-specific analysis of technology implementation of energy carrier
Socioeconomic analysis
Regional characteristics
Hydrogen energy system
SP-1597
CA119A supporting information infrastructure for technology implementation
Computer-Aided Process Engineering
Modeling
Simulation
SP-1540
CA120Characterization of factors for social implementation of technology systems based on bibliometric analysis
socioeconomic
technoeconomic
sociotechnical
SP-1675
CA121A vision-oriented, deductive approach for process development: a simplified demonstration with bio-fuel production consuming hydrogen
bio-fuel
life cycle assessment
process design
SP-11024
CA122Challenges in ensuring coherence among technology roadmaps
coherence
roadmaps
innovation
SP-1448
Hall BA(Bldg. of Lecture Room for Engineering 1F 111)
SY-77 [Symposium of Division of Energy Engineering]
(15:00–15:40) (Chair: Kobayashi Nobusuke)
15:00– 15:40BA119[Requested talk] Development of fuel cells for low-carbon conversion process of carbon resources
DCFC
SOFC
Carbon resources
SY-77485
(15:40–17:00) (Chair: Kobayashi Nobusuke, Kudo Shinji)
15:40– 16:00BA121High-efficiency power generation utilizing liquid-solid redox reactions between low-grade carbonaceous resources and metal ions
low-rank coal
redox reaction
power generation
SY-77851
16:00– 16:20BA122Adhesion characteristics of Si compounds on the deNOx catalyst surface
Silicon compounds
Catalyst
DeNOx
SY-77833
16:20– 16:40BA123Kinetics of the gasification of Mongolian brown coals
Gasification
Brown Coal
Mechanism
SY-77889
16:40– 17:00BA124Effect of char pore structure on tar reforming characteristics
Coal gasification
Tar reforming
Pore structure
SY-77847
Hall BB(Bldg. of Lecture Room for Engineering 2F 121)
SY-79 [Symposium of Division of Materials and Interfaces]
(1) Progress in Material Fabrication and Interface Phenomena (Oral Session)
(9:00–10:20) (Chair: Watanabe Satsohi)
9:00– 9:20BB101Activities of division of materials and interfaces
division of materials and interfaces
SY-79651
9:20– 9:40BB102Novel method for Fabricating new silica nanoparticles containing Doxorubicin core
silica
torehalose
core-shell nanoparticle
SY-79988
9:40– 10:00BB103Novel method for fabricating new silica nanoparticles containing Doxorubicin core
Doxorubicin
Silica nanoparticles
Drug Delivery System
SY-79911
10:00– 10:20BB104Design of Polymer Particles Maintaining Dispersion Stability for Sol-Gel Reaction on Polymer Surfaces
Core-Shell Particle
Soap-Free Emulsion Polymerization
Sol-Gel Reaction
SY-7923
(10:40–12:00) (Chair: Matsune Hideki)
10:40– 11:00BB106Flow Microreactor Synthesis and Optical Properties of Silica-Silver Composite Particles
Microreactor
Nucleation
Core-shell
SY-79691
11:00– 11:20BB107Development of Silica-Coated Gold Nanorod Composite Nanoparticles and Evaluation of their X-ray CT-imaging Ability
Au nanorod
silica-coating
X-ray imaging
SY-7953
11:20– 11:40BB108Synthesis of SiOx/carbon composite particles and battery performance evaluation
SiOx
N-doped carbon
composite particles
SY-79131
11:40– 12:00BB109The carbonization and graphitization behavior of polybenzimidazole nano fiber
Carbon nanofiber
polybenzimidazole
Electrospiniing
SY-79167
(13:00–13:40) (Chair: Yamamoto Tetsuya)
13:00– 13:40BB113[Invited lecture] Surface intensified separation - bubbles, droplets and ultrasound
bubbles
droplets
ultrasound
SY-79340
(13:40–14:40) (Chair: Takei Takayuki)
13:40– 14:20BB115[Invited lecture] Application of sealing glass and future prospects
Glass
Seal
SY-79657
14:20– 14:40BB117High selective synthesis and formation mechanism of silver nanowire using silver chloride complex as silver source
silver nanowire
silver chloride complex
high selective synthesis
SY-79862
(15:00–16:00) (Chair: Ohsaki Shuji)
15:00– 15:20BB119Vapor-phase conversion of ZnO to ZIF-8 MOF
ZnO
ZIF-8
Vapor-phase synthesis
SY-791062
15:20– 15:40BB120Homogeneous Deposition of TiO2 Nanoparticles on Various Porous Substrates using the VLP-CVD technique
Lithium-ion Capacitor
Photo Catalyst
Chemical Vapor deposition
SY-79217
15:40– 16:00BB121Adsorption behavior tuning through interface engineering with core-shell soft MOF particles
(Kyoto U.) *(Stu·PCEF)Fujiwara A., (Reg)Watanabe S., (Reg)Miyahara M. T.
Metal-organic frameworks
Core-shell particles
Microreactor
SY-791061
(16:00–17:00) (Chair: Tanaka Shunsuke)
16:00– 16:20BB122Solubilization of sparingly water-soluble drug using micropore of metal-organic framework
Sparingly water-soluble drug
Solid dispersion
Metal-organic framework
SY-79361
16:20– 16:40BB123Preparation of metal-organic framework UiO-66 by spray-assisted synthetic process
continuous synthesis
droplet evaporation
adsorption measurement
SY-79418
16:40– 17:00BB124Sr2+ adsorption of zeolite agglomerates prepared by spray-drying
4A zeolite
nano particle
liquid phase adsorption
SY-79369
Hall BC(Bldg. of Lecture Room for Engineering 3F 131)
SY-82 [Symposium of Division of Materials and Interfaces]
(4) New Technologies in Various Dispersion System ~Functional Particles, Emulsion, Bubbles, Droplets, Hybrid Materials, Biomaterials~
(10:20–11:00) (Chair: Nakazato Tsutomu)
10:20– 10:40BC105Development of rapidly gelable hydrogel with high efficacy in wound healing and tissue adhesiveness
hydrogel
wound healing
tissue adhesiveness
SY-82803
10:40– 11:00BC106Evaluation of thin film properties of organic-inorganic hybrid material composed of polysilsesquioxane and acrylic monomer
polysilsesquioxane
organic-inorganic hybrid material
thin film
SY-82829
(11:00–12:00) (Chair: Takei Takayuki)
11:00– 11:20BC107The preparation of hydrogel from a low-molecular-weight-organogelator and development to the high internal phase emulsion
organogelator
hydrogel
emulsion
SY-82908
11:20– 11:40BC108Development of a spontaneous emulsification technique using porous silica particles
Spontaneous emulsification
Silica particles
SY-821026
11:40– 12:00BC109A study on a synthesis of long chain-silane coupling agent in heterogeneous system
micro flow reactors
silane coupling agent
organic synthesis
SY-82282
(13:00–14:00) (Chair: Yamauchi Noriko)
13:00– 13:20BC113Improvement of dispersibility of poorly water-soluble drugs using Soluplus
Soluplus
dispersibility
drug
SY-82546
13:20– 13:40BC114The dispersion stability improvement of cellulose nanofiber solution by infrared irradiation
cellulose nanofiber
stable dispersion
infrared irradiation
SY-82857
13:40– 14:00BC115Preparation of silica particle/oil/water capillary suspension
Capillary suspension
Silica particle
Oil
SY-82951
(14:00–15:00) (Chair: Ono Fumiyasu)
14:00– 14:20BC116Preparation of giant polymer vesicles using an electrospray technique
electrospray
vesicle
MPC polymer
SY-8267
14:20– 15:00BC117[Invited lecture] Functionalization and Application of Anisotropic Plasmonic Nanoparticles
plasmon
nanoparticles
photochemistry
SY-82329
(15:00–16:00) (Chair: Matsukawa Hiroaki)
15:00– 15:20BC119One-pot incorporation of fluorescent dyes into sugar-immobilized PMMA particles during their growth
spontaneous intra-particle incorporation
PMMA particle fluorescenation
glucoside surface modification
SY-82537
15:20– 15:40BC120Development of microcapsules encapsulating phase change materials by using microfluidic devices
microcapsule
microfluidic device
phase change material
SY-82925
15:40– 16:00BC121Investigation of fabrication method of ordered binary system composed of organic-modified nanoparticles
nanoparticles
binary system
modification
SY-82310
(16:00–17:00) (Chair: Akamatsu Kazuki)
16:00– 16:20BC122Addressing the Viscosity Challenge: Ultrafast, Stable-Flow Synthesis of Zeolites with An Emulsion Method
ultrafast
stable-flow synthesis
emulsion
SY-821035
16:20– 16:40BC123Statistical convergence judgement on the characterization of particle size distribution
particle size distribution
image analysis
statistics
SY-82629
16:40– 17:00BC124Evaluation of influence of fine particle surface modification using Hansen solubility parameter
Hansen solubility parameter
Treatment agent
fine particle
SY-82423
Hall CA(Bldg. "Lecture Room & Student Office", Faculty of Engineering 2F 201)
(9:00–10:20) (Chair: Matsumoto Hiromasa, Muranaka Yosuke)
9:00– 9:20CA101Challenges in innovation of chemical technologies: obstacles and keys for success identified from questionnaire
questionnaire
obstacles
drivers
SP-1893
9:20– 9:40CA102Conceptual Design of A System for Frequency Stabilization of Massively Installed Intermittent Renewable Energy Systems
Frequency Stabilization
Hydrogen Production
Battery
SP-1720
9:40– 10:00CA103Technoeconomic analysis of battery-assisted hydrogen production from renewable energy
Battery
Roadmap
off-grid
SP-1784
10:00– 10:20CA104Techno-economic analysis of lithium-air batteries considering mass transfer limitation
Lithium-air battery
Techno-economic analysis
Energy system
SP-1806
(10:20–12:00) (Chair: Higuchi Takeshi, Watanabe Masaru)
10:20– 10:40CA105Development of phosphorus fertilizer with 85% recovery rate and harmless residue from sludge ash
sludge ash
recovery of phosphorus
phosphorus fertilizer and free heavy metal
SP-1650
10:40– 11:00CA106Basic problems and measures toward establishment of rational methodology of process with complex fluids
Complex fluid
Process design
Numerical simulation
SP-1556
11:00– 11:20CA107Prospects for the proper food distribution by edible thermal energy storage
thermal energy storage
edible microcapsule
distribution
SP-1218
11:20– 11:40CA108Demonstration test of an SOFC Power Generation System
Carbon-Neutral
SOFC fuel cell
Biogas
SP-11012
11:40– 12:00CA109Availability of snow for cooling in urban area with heavy snowfall and its potential for load reduction of snow removal
renewable energy
snow storage
life cycle assessment
SP-11015
SP-1 [Special Symposium]
Challenge of Chemical Engineers for Social Implementation
(13:00–14:20) (Chair: Nakagawa Kyuya, Kansha Yasuki)
13:00– 13:40CA113[Review lecture] Japan-Thailand Joint Research under SATREPS program
coal
reuse
Thailand
SP-1219
13:40– 14:00CA115Case study on introduction of biofuel production technology using ion-exchange resin catalyst on Tanegashima
biofuel production
introduction of new technology
ion-exchange resin
SP-11036
14:00– 14:20CA116The actual situation that is implementing OMICS-technology for oil refinery
Petroleomics
oil refinery
crude oil
SP-1116
(14:20–15:20) (Chair: Ohara Satoshi)
14:20– 14:40CA117Proposal of cost-competitive distributed energy system using solar cells and hydrogen energy storage
solar cell
hydrogen
energy system
SP-1673
14:40– 15:00CA118A region-specific analysis of technology implementation of energy carrier
Socioeconomic analysis
Regional characteristics
Hydrogen energy system
SP-1597
15:00– 15:20CA119A supporting information infrastructure for technology implementation
Computer-Aided Process Engineering
Modeling
Simulation
SP-1540
Hall CB(Bldg. "Lecture Room & Student Office", Faculty of Engineering 2F 202)
SY-60 [Symposium of Division of Separation Processes]
(4) The State of the Art of Particle-Fluid Separation Process
(9:20–10:00) (Chair: Mukai Yasuhito)
9:20– 9:40CB102Adsorption treatment of Nickel in plating waste water with humus
adsorption treatment of Nickel
plating waste water
humus
SY-60960
9:40– 10:00CB103Permeation characteristics of chitosan membranes with vascular structure prepared with 3D-printed PVA molds
chitosan
membrane
3D-printed mold
SY-601000
(10:20–11:20) (Chair: Tanaka Takaaki)
10:20– 10:40CB105Concentration separation of the humic acid using freeze concentration with ultrasonic irradiation
Humic acid
Ultrasonic irradiation
Freeze concentration
SY-60273
10:40– 11:00CB106Influence of ultrasonic irradiation on fine particle fractionation using microfiltration
ultrasonic
particle fractionation
microfiltration
SY-601078
11:00– 11:20CB107Characteristics of constant rate filtration in dynamic filter with rotating drum and tangential flow
dynamic filtration
rotating filter
tangential flow
SY-601079
(11:20–12:00) (Chair: Kawasaki Kenji)
11:20– 12:00CB108[Review lecture] New developments of engineering for solid-liquid separation
Solid-liquid separation
Cake compressibility
Membrane Clogging
SY-6032
(13:00–14:20) (Chair: Katagiri Nobuyuki, Kawasaki Kenji)
13:00– 13:20CB113Electrokinetic response of solid-liquid mixture during filtration and ex-pression processes
expression
streaming potential
filtration period
SY-60719
13:20– 13:40CB114Development of particle counter using spectral properties of Metal Mesh Device
metal mesh device
particle size distribution
size separation
SY-60122
13:40– 14:00CB115Particle separation by deformation of gel packed in column
particle separation
gel deformation
ceramics
SY-60715
14:00– 14:20CB116The consideration of filtration rate of bentonite suspension with poly((2-dimethylamino)ethyl methacrylate)
Temperature-responsive polymer
Filtration
Aggregation
SY-60190
(14:40–16:00) (Chair: Kawakita Hidetaka, Nakamura Ayano)
14:40– 15:00CB118Improvement in Settling Performance of Disrupted Sludge by Stepwise Addition of Inorganic Salts
settling
flocculation
disrupted sludge
SY-60870
15:00– 15:20CB119Evaluation of Compression-Permeability Characteristics of Emulsion Cake Based on Centrifugal Flotation Data
centrifugal flotation
compression-permeability characteristics
emulsion cake
SY-60875
15:20– 15:40CB120Effect of Coexisting Fine Particles on Membrane Filtration Properties of Yeast
filtration
yeast
fine particles
SY-60878
15:40– 16:00CB121Membrane Fouling Properties of Solution Containing Polysaccharide and Protein as Model of Microbial Metabolite
membrane fouling
polysaccharide
protein
SY-60880
Hall CC(Bldg. "Lecture Room & Student Office", Faculty of Engineering 3F 301)
SY-63 [Symposium of Division of Separation Processes]
(7) Industrial Membrane Technologies 2018
(9:20–10:20) (Chair: Nomura Mikihiro)
9:20– 9:40CC102[Requested talk] Development of highly permeable silica-based membranes
Silica membrane
Nanoporous membrane
pervaporation
SY-63184
9:40– 10:00CC103[Requested talk] Water treatment process by using high performance PTFE membrane
PTFE membrane
Oil resistance
abrasion resistance
SY-63360
10:00– 10:20CC104[Requested talk] Introduction of bio-ethanol purification using ZEBREXTM technology
Zeolite membrane
Bio-ethanol
Ethanol Purification
SY-6339
(10:40–12:00) (Chair: Matsukata Masahiko)
10:40– 11:00CC106Research and development of super high strength membrane and high efficient module
Hollow fiber
membrane module
TIPS
SY-63382
11:00– 11:20CC107[Requested talk] Development of Porous Ceramic Substrates For Zeolite Membranes
Porous ceramic substrate
Zeolite membrane
SY-63843
11:20– 11:40CC108[Requested talk] High permeability and SS resistance hollow fiber membrane module
Module structure
SS resistance
High concentration
SY-63504
11:40– 12:00CC109[Requested talk] Zeolite membranes with all-in-one design ceramic element for gas separation
Membrane
Zeolite
Gas separation
SY-63505
(13:00–14:00) (Chair: Matsuyama Hideto)
13:00– 13:20CC113Effects of Surfactants as Additives on Chlorinated Poly(Vinyl Chloride) membrane
membrane
surfactant
hydrophilicity
SY-63625
13:20– 13:40CC114[Requested talk] Dispersion and cleaning technologies for the reverse osmosis membrane
dispersant
cleaning agent
protection agent
SY-63299
13:40– 14:00CC115[Requested talk] High concentration new technology by creating new membrane
High concentration
New membrane
Non-RO process
SY-63188
Hall CD(Bldg. "Lecture Room & Student Office", Faculty of Engineering 3F 302)
ST-23 [Trans-Division Symposium]
Approach to Urban Mine Recycling
(9:00–10:20) (Chair: Oshima Tatsuya, Murayama Norihiro)
9:00– 9:40CD101[Review lecture] For activation of urban mining development
Urban mining
Recycle
Reserves
ST-23956
9:40– 10:00CD103[Requested talk] Recycling of precious metal
Precious metal
Recycling
Wet process
ST-23291
10:00– 10:20CD104[Requested talk] Low Cost Disassembling Processing Technology Demonstration of Laminated Glass PV Modules
recycle
CIS-PVmodule
low cost
ST-23201
10:20– 10:40Break
(10:40–12:00) (Chair: Matsuoka Mitsuaki, Suzuki Tomoya)
10:40– 11:00CD106Selective Precipitation of Palladium(II) using Halogen-containing Pyridine Derivatives
palladium
precipitant
pyridine derivatives
ST-23835
11:00– 11:20CD107wet treatment of steelmaking slag for preparation of anion removal agent
Steelmaking slag
Anion removal agent
Recycling
ST-23302
11:20– 11:40CD108Synthesis of geopolymer from coal fly ash and influence of synthesis conditions on its mechanical properties
Geopolymer
Coal fly ash
ST-23400
11:40– 12:00CD109Development of Recycling System of Gold from Secondary Resources Using Organic Aqua Regia
precious metal
propylene carbonate
recycling
ST-23157
(13:00–14:40) (Chair: Nakai Satoshi, Gotoh Takehiko)
13:00– 13:20CD113[Requested talk] Development of new tungsten recovery system from a waste cemented carbide tool
Urban mining
Recycle
Charged Amino Group Assisted Precipitation
ST-23164
13:20– 13:40CD114[Requested talk] Development of adsorbents for selective recovery of antimony
antimony
adsorption
recovery
ST-23438
13:40– 14:00CD115Biotechnological recovery of precious and rare metals from post-consumer products by using baker's yeast
recycling
precious and rare metals
baker's yeast
ST-23805
14:00– 14:20CD116Biotechnological Recycling and catalyst preparation of platinum group metals
recycling
platinum group metals
nanoparticle catalysts
ST-23815
14:20– 14:40CD117Adsorption behavior of rare earth elements using polymeric adsorbents prepared from various monomers
rare earth elements
recovery
adsorption
ST-23346
14:40– 15:00Break
(15:00–16:00) (Chair: Ohto Keisuke, Kubota Fukiko)
15:00– 15:20CD119Adsorption of platinum group metal in hydrochloric acid solution by betaine-type ion-exchange resin
Adsorption
Platinum group metal
Betaine-type ion-exchange resin
ST-23301
15:20– 15:40CD120Development of Heavy Metal Adsorbent by using Dolomite and Its Characteristics
Heavy Metal Adsorbent
Dolomite
phosphorus
ST-23631
15:40– 16:00CD121Development of recovery process of gold ions in hydrochloric acid solution using nylon nanofiber membrane
nanofiber membrane
adsorption
gold ion
ST-231080
(16:00–17:20) (Chair: Mukai Yasuhito, Ueda Yuki)
16:00– 16:20CD122A study on structural factors of ethereal compounds for Au(III) extraction in hydrochloric acid media
gold
extraction
ether
ST-23117
16:20– 16:40CD123Extraction of precious metals with fluorinated amide type extractant
Extraction
Precious metals
Amide
ST-23623
16:40– 17:00CD124Recovery of PGMs from an automobile catalyst using a novel ionic liquid
ionic liquids
PGMs
recycle
ST-23612
17:00– 17:20CD125Development of novel ionic liquids for the selective extraction of platinum group metals
extraction
platinum group metal
ionic liquids
ST-231053
Hall CE(Bldg. "Lecture Room & Student Office", Faculty of Engineering 3F 303)
ST-24 [Trans-Division Symposium]
Carbon Capture and Utilization (CCU) ; Process Development and Fundamental Properties
(9:00–9:40) (Chair: Takahashi Nobuhide)
9:00– 9:40CE101[Review lecture] Global Trend of CO2 Utilization
CO2 utilization
Paris Agreement
Innovation
ST-2480
(9:40–10:20) (Chair: Machida Hiroshi)
9:40– 10:20CE103[Invited lecture] CO2 fuelization with using renewable hydrogen and its prospect
Renewable Hydrogen
Synthesis of Methane
CO2 recycling
ST-24780
(10:20–11:00) (Chair: Taniguchi Ikuo, Kodama Daisuke)
10:20– 10:40CE105A Study of R&D Issues for Carbon Recycling Society
CCU
catalysis
separation
ST-24771
10:40– 11:00CE106The effect of membrane properties on CO2 capture process
CO2 capture
membrane separation
process analysis
ST-24848
(11:00–12:00) (Chair: Kodama Satoshi, Oba Shigeo)
11:00– 11:20CE107Development of CO2 separation membrane modules for negative carbon emission
membrane separation
membrane module
negative emission
ST-24359
11:20– 11:40CE108CO2 solubility and phase behavior in phase separation solvent at high pressure
Carbon dioxide capture
Phase separation solvent
CO2 Solubility
ST-24356
11:40– 12:00CE109Carbon dioxide / methane absorption selectivity of protic ionic liquids
protic ionic liquid
absorption
selectivity
ST-24464
(13:00–13:40) (Chair: Oba Shigeo)
13:00– 13:40CE113[Review lecture] Research and Development of Advanced CO2 Capture Technologies
Amine
CO2 Capture
Molecular Design
ST-24710
(13:40–14:40) (Chair: Machida Hiroshi, Takahashi Nobuhide)
13:40– 14:00CE115Effect of MgO particle morphology on reaction rate in a CO2 mineralization process producing construction aggregate using waste brine
CO2 Capture Utilization and Storage (CCUS)
carbon dioxide removal (CDR)
desalination
ST-24318
14:00– 14:20CE116Design of nanogel composite material for improvement of CO2 absorption rate
particle
CO2 separation
gas diffusion
ST-24974
14:20– 14:40CE117Construction of CO2 absorption-desorption system using Amine-functionalized magnetic particles
Carbon dioxide absorption
Magnetic nanoparticle
Amine functionalization
ST-24542
14:40– 15:00Break
(15:00–15:40) (Chair: Yamada Hidetaka)
15:00– 15:40CE119[Invited lecture] Toshiba's Activities in Carbon Capture Technology Development
Carbon Capture Technology
Carbon Capture and Utilization
Carbon Capture and Storage
ST-24200
(15:40–17:00) (Chair: Makino Takashi, Yamada Hidetaka)
15:40– 16:00CE121Molecular Dynamics Study on Small Molecule Adsorption and the Transport Properties of Long-chain Imidazolium Ionic Liquids
molecular dynamics
ionic liquids
CO2 adsorption
ST-24961
16:00– 16:20CE122Enrichment of CO2 in Exhaust Gas by Thermal Swing Adsorption Supported with Indirect Heating
Thermal swing adsorption
CO2 separation and enrichment
Low temperature waste heat
ST-24260
16:20– 16:40CE123Development of Molecular Gate Membrane Module for CO2 separation
molecular gate membrane
CO2 separation
IGCC
ST-24269
16:40– 17:00CE124Influence of membrane properties and pressure difference on CO2 desorption from amine absorbent in the membrane flash process with an alumina porous hollow fiber membrane
CO2 stripping
chemical absorption
Carbon capture and storage
ST-241041
(17:00–17:20)
17:00– 17:20General discussion
Hall DA(General Education Building Four 2F 421)
SY-76 [Symposium of Division of Supercritical Fluids]
(11:00–12:00) (Chair: Yoko Akira, Sakabe Junichi)
11:00– 11:20DA107Supercritical carbon dioxide dyeing for various synthetic resin buttons
Supercritical carbon dioxide
Supercritical dyeing
Synthetic resin buttons
SY-761020
11:20– 11:40DA108Extraction of Phytochemicals from Spent Coffee Grounds by Using Supercritical Carbon Dioxide
Supercritical fluid extraction
Spent coffee
Lipid
SY-76111
11:40– 12:00DA109Cocrystal formation of Norfloxacin with CO2 in supercritical fluid
Cocrystal with CO2
supercritical CO2
norfloxacin
SY-76967
(13:00–14:00) (Chair: Shimoyama Yusuke, Aizawa Takafumi)
13:00– 13:20DA113Hydrothermal synthesis of Ni@BaTiO3 core-shell nanoparticles and observation of the formation process
Hydrothermal synthesis
Core-shell structure
Nanoparticles
SY-76320
13:20– 13:40DA114Development of metal thin film coating technique for Nd2Fe14B powder using supercritical carbon dioxide
supercritical carbon dioxide
coating
magnetic material
SY-76538
13:40– 14:00DA115Polymer foaming behavior with CO2 and organic solvent mixture
Polymer foam
Carbon dioxide
organic solvent
SY-76541
(14:00–15:00) (Chair: Osada Mitsumasa, Tanaka Chiaki)
14:00– 14:40DA116[Invited lecture] Chemical Processes under Conditions Mimicking Deep-Sea Hydrothermal Vents
Hydrothermal
Supercritical water
Deep-Sea
SY-76594
14:40– 15:00DA118Preparation of Solid Dispersion Containing a Poorly Water-soluble Drug With Using Supercritical CO2
Solid dispersion
Poorly water-soluble drug
Supercritical carbon dioxide
SY-76543
(15:00–16:00) (Chair: Kanda Hideki, Kawanami Hajime)
15:00– 15:20DA119Mechanistic study of hydrothermal leaching of lithium cobalt oxide with citric acid complexing agent
Separations
Metal recovery
Citric acid
SY-76550
15:20– 15:40DA120Effects of reaction conditions on defluorination of 4-fluoronitrobenzene with aqueous amine solution under hydrothermal conditions
Defluorination
Hydrothermal
Aqueous amine solution
SY-76723
15:40– 16:00DA121Evaluation of basicity of solid catalyst in hot compressed water using poisoning by acid additives
basicity
hot compressed water
solid catalyst
SY-76737
(16:00–17:00) (Chair: Watanabe Masaru)
16:00– 16:20DA122Effects of adding amine species on product yields from hydrothermal depolymerization of poly(butylene terephthalate)
poly(butylene terephthalate)
depolymerization
hydrothermal
SY-76772
16:20– 16:40DA123Effects of reaction conditions on hydrolysis of filter paper in dilute aqueous alkali solutions under hydrothermal conditions
Filter paper
dilute aqueous alkali solutions
hydrolysis
SY-76783
16:40– 17:00DA124Elucidation of particle size control factor of metal oxide nanoparticle synthesis using supercritical mixed solvents
Supercritical
nanoparticles
barium titanate
SY-76859
Hall DB(General Education Building Four 3F 431)
ST-28 [Trans-Division Symposium]
Recent Development of the Fundamentals and Applications of Thermal Energy
(9:00–10:20) (Chair: Kubota Mitsuhiro, Shoji Eita)
9:00– 9:20DB101Heat storage performance of granular latent heat storage composite for high temperature
Thermal energy storage
Phase change material
High temperature
ST-28790
9:20– 9:40DB102Thermal-Hydraulics Characteristics of SiO2 Nanofluid Containing Ethylene Glycol
(Toyota Central R&D Lab.) *(Reg·APCE)Hashimoto Shunsuke, (Cor)Kurazono Koichi, (Cor)Yano Kazuhisa, (Cor)Ishii Masahiko, (Reg)Nakamura Hiroshi
Silicondioxide nanofluid
Heat transfer coefficient
Thermal conductivity
ST-28150
9:40– 10:00DB103Shell structure control of microencapsulated latent heat storage material with Al-Si alloy
Phase change material
Latent heat storage
Microencapsulation
ST-28415
10:00– 10:20DB104Fabrication of amino silane modified graphene bonded heat transfer surface by using wet coating process
graphene
molecular bonded heat transfer surface
Interfacial Thermal resistance
ST-28817
(10:40–12:00) (Chair: Hashimoto Shunsuke, Hironaka Shuji)
10:40– 11:00DB106Flow Characteristics of Silica Hard-Shell Microcapsule Slurries with Surfactants and Stabilizer
Latent heat
Drag reduction
microcapsule
ST-28522
11:00– 11:20DB107Response characteristic of interfacial tension by pulse microwave irradiation
microwave
interfacial tension
thermal response
ST-2870
11:20– 11:40DB108Study on composition dependence of normal spectral emissivity of molten Cu-Fe alloy
normal spectral emissivity
molten Cu-Fe alloy
electromagnetic levitation
ST-28915
11:40– 12:00DB109Oxygen deficiency control of transition metal oxide by hydrogen reduction in fluidized bed
Fluidized bed
Hydrogen reduction
Oxygen deficiency
ST-28926
(13:00–14:40) (Chair: Ryu Junichi, Asakuma Yusuke)
13:00– 13:20DB113Combustion characterization of diffusion flame of hydrogen-methane mixture and air using micro arrayed burner
Combustion
Micro burner
Heating furnace
ST-28494
13:20– 13:40DB114Ammonia combustion for cement manufacturing process
Ammonia
Combustion
Cement
ST-28355
13:40– 14:00DB115Low Temperature Cycle Using Amine-CO2 Fluid (5) Dependence of Power on MDEA Fluid Conditions
amine-CO2
low temperature
power cycle
ST-2811
14:00– 14:40DB116[Invited lecture] Development of Energy Carrier Technology with Ammonia
Energy Carrier
Ammonia
Catalysis
ST-28141
(15:00–16:00) (Chair: Kobayashi Noriyuki, Hidema Ruri)
15:00– 15:20DB119Effect of Simultaneous Modification of Li Compound on reactivity and structure of Mg(OH)2
Chemical heat storage
Magnesium hydroxide
Lithium compound
ST-28368
15:20– 15:40DB120Visualization and mass transfer mechanism in gas-liquid interface of LiBr fine crystal slurry during water vapor absorption process
slurry
ST-281025
15:40– 16:00DB121Effect of addition of Li compound on dehydration reaction and crystal structure of Ca(OH)2
Themo-chemical energy storage
Calcium hydroxide
Li-compound addition
ST-28531
(16:00–17:00) (Chair: Nomura Takahiro, Masuda Hayato)
16:00– 16:20DB122Chemical heat battery driven by LiOH hydration reaction - the effect of carbonation of LiOH on the hydration reaction rate -
Chemical heat battery
Carbonation
Reaction rate
ST-28125
16:20– 16:40DB123Influence on the reactivity with CO2 by adding chlorides to Li4SiO4
(Chiba U.) *(Stu)Hanaoka Y., (Reg)Ryu J.
Carbon dioxide Capture and Storage
Thermal energy utilization
Chemical heat storage
ST-28491
16:40– 17:00DB124Evaluation basic characteristics of absorption heat pumps with HFC-refrigerant
Absorption heat pumps
HFC- refrigerant
absorption equilibrium
ST-28716
Hall EA(General Education Building Three 1F 313)
SY-67 [Symposium of Division of Systems, Information and Simulation Technologies]
Information Integration and Modeling Approaches
(13:00–14:20) (Chair: Sugiyama Hirokazu)
13:00– 13:40EA113[Review lecture] Systematic Method of Modeling
(Kyoto U.) (Reg·APCE)Kim Sanghong
Modeling
Automation
Domain knowledge
SY-67119
13:40– 14:20EA115[Review lecture] Recent progress on granular and multi-phase flow simulations
Discrete element method
Solid-fluid coupling problem
Complex shape domain
SY-67247
(14:20–15:40) (Chair: Yamashita Yoshiyuki, Hori Yoshinari)
14:20– 14:40EA117Parameter estimation for adsorption processes using Markov chain Monte Carlo method
Bayesian inference
Chromatography
Adsorption
SY-67313
14:40– 15:00EA118Determination of lot-size in injectable manufacturing by the integrated use of process information
Pharmaceutical manufacturing
Decision making
Economic optimization
SY-67433
15:00– 15:20EA119Process evaluation models for continuous tablet manufacturing based on design of experiments
Pharmaceuticals
Continuous manufacturing
Granulation
SY-67460
15:20– 15:40EA120Description of System Model for Managing Process Safety Information
Process Safety Management
System Model
SysML
SY-671009
(15:40–17:00) (Chair: Takeda Kazuhiro, Kim Sanghong)
15:40– 16:00EA121Study of Data Analysis System for Industrial Plant Using Data Clustering Technology
Data Clustering
Adaptive Resonance Thenory
Data Analysis
SY-67891
16:00– 16:20EA122Construction of Variable Power Protocol for Installation of Hydrogen Production System Using Renewable Energy
Renewable Energy
Hydrogen Production System
Variable Power Protocol
SY-67639
16:20– 16:40EA123A supporting tool for roadmapping a recycling technology of Si-photovoltaics toward the achievement of energy mix target
Material Flow Analysis
Deductive Life Cycle Assessment
Recycling
SY-671027
16:40– 17:00EA124Integrated life cycle assessment method for sustainable packaging design
Sustainable product design
Packaging functionality
Food packaging
SY-67567
Hall EC(General Education Building Three 1F 311)
SY-64 [Symposium of Division of Chemical Reaction Engineering]
New Development of Reaction Engineering in the Field of Natural Resources, Energy, and Environment
(15:00–15:40) (Chair: Takebayashi Yoshihiro)
15:00– 15:40EC119[Review lecture] Development of microchannel reactor for natural gas steam reforming
Syngas
Methane
Catalyst
SY-64469
(15:40–16:20) (Chair: Kawase Motoaki)
15:40– 16:20EC121[Review lecture] Chemical Reaction Engineering for CVD/ALD processes
CVD
ALD
Process Design
SY-64362
(16:20–17:00) (Chair: Tago Teruoki)
16:20– 17:00EC123[Review lecture] Research and Innovation promotion of Dept. of Materials and Chemistry in AIST
Research
Innovation promotion
Dept. of Materials and Chemistry in AIST
SY-64364
Hall ED(General Education Building Three 2F 324)
ST-31 [Trans-Division Symposium]
Analysis of Diffusion Phenomena and Development towards Process Intensification
(9:00–10:20) (Chair: Horie Takafumi, Sotowa Ken-ichiro)
9:00– 9:20ED101Flow characteristics of a falling thin film discharged from a rotating disk to an inner cylinder wall
falling thin film
rotating flow
flow dynamics
ST-31764
9:20– 9:40ED102Effect of polymer aqueous solution on Taylor-Couette Flow
Taylor vortex
Polymer solution
Viscoelasticity
ST-31727
9:40– 10:00ED103Analysis of transport phenomena in a high cell density cultivation process for Aspergillus using biomass support particles
high cell density cultivation
mixing
mass transfer
ST-31763
10:00– 10:20ED104Experimental Investigation of the Effect for Borax Capsule Structure with PVA Concentration Difference in Circular Flow Pipe
PVA - Borax gel
Capsule flow
Poincare plot
ST-31332
10:20– 10:40Break
(10:40–11:20) (Chair: Yoshikawa Shiro)
10:40– 11:00ED106Mass transfer rate around a single crystal in a crystallization apparatus
crystallization
mass transfer
shear flow
ST-31658
11:00– 11:20ED107Analysis of flow and particle behavior in an oscillatory baffled reactor for continuous crystallization
Oscillatory baffled reactor
Continuous process
Fluid dynamics
ST-31943
(11:20–12:00) (Chair: Kawajiri Yoshiaki)
11:20– 12:00ED108[Invited lecture] Operation Design of Crystallization Process for Production of High-Quality Crystalline Particles
Operation Design
Crystallization
Quality Control
ST-31178
(13:00–13:40) (Chair: Matsumoto Hideyuki)
13:00– 13:40ED113[Invited lecture] Mass transport phenomena in electrochemical system and its analysis technology
electrochemical
heterogeneous
mass transport
ST-31172
(13:40–14:40) (Chair: Matsumoto Hideyuki, Ohmura Naoto)
13:40– 14:00ED115Three-dimensional structural analysis of porous TiO2 aiming for catalyst support
FIB-SEM
Catalyst support
Image processing
ST-31267
14:00– 14:20ED116Design of the structured catalyst reactor considering convection and diffusion
Structured catalyst
Process intensification
convection and diffusion
ST-31751
14:20– 14:40ED117Operation of Two-Phase Flow for Intensification of Formic Acid Production Process
formic acid
hydrogen carrier
slug-flow reactor
ST-31590
14:40– 15:00Break
(15:00–16:00) (Chair: Kawajiri Yoshiaki, Yamaki Takehiro)
15:00– 15:20ED119Study on stacking the foil type catalyst
foil type catalyst
stacking
methanol steam reforming
ST-31749
15:20– 15:40ED120Feasibility Study of the Methylcyclohexane Dehydrogenation Process using Reactive separation methods
Reactive separation
MCH dehydrogenation
Simulation
ST-31216
15:40– 16:00ED121Modeling by transport scientific approach for a packed distillation column
Packed column
Distillation
Mass transfer
ST-3124
(16:00–17:00) (Chair: Matsuda Keigo, Sakurai Makoto)
16:00– 16:20ED122Development of Cascade Rankine Cycle and their Power Generation Performances
Renewable Energy
Rankine Cycle
Cascade
ST-31405
16:20– 16:40ED123Model parameter estimation for simulated moving bed chromatography from operating data
simulated moving bed
chromatography
parameter estimation
ST-31820
16:40– 17:00ED124Fusion of data analysis and process knowledge
Data analysis
Batch Process
Process Data Analytics
ST-3187
Hall EE(General Education Building Three 2F 322)
SY-85 [Symposium of Division of Chemical Plant Materials Engineering]
14:50– 15:00Opening remark
(DHF) (Reg)Umeda Isamu
(15:00–16:40) (Chair: Umeda Isamu)
15:00– 15:20EE119Development of degradation detecting method for FRP used in sodium hypochlorite environment
FRP
sodium hypochlorite
optical fiber sensor
SY-85486
15:20– 15:40EE120Durability evaluation of talc filled polyolefin packing materials under acidic conditions
Polypropylene
Degradation
Packing material
SY-85549
15:40– 16:00Break
16:00– 16:20EE122Evaluation of productivity of graphene using pressure homogenizer
graphene
LPE
homogenizer
SY-85574
16:20– 16:40EE123Study on Rain Erosion Behavior of FRP (the effects of coating film)
(Nihon U.) *(Stu)Suzuki M., (Reg)Mitomo N., (Reg)Sakai T.
Rain erosion
FRP
Coating film
SY-85570
Hall EG(General Education Building Three 3F 331)
ST-26 [Trans-Division Symposium]
Novel Development in Batteries, Fuel Cells, Solar Cells and Other Energy Conversion/ Storage Technologies -From Nano Design to System Design- (Oral session)
(10:00–11:00) (Chair: Kosaka Fumihiko)
10:00– 10:20EG104Research for Steam and Carbon Dioxide Electrolysis using Solid Oxide Cells for Methane Synthesis and Prospect
high temperature electrolysis
methane synthesis
SOEC
ST-26605
10:20– 10:40EG105Influence of transport properties in solid oxide fuel cells with proton-conducting lanthanum tungstate
lanthanum tungsten oxide
proton conductor
SOFC
ST-26750
10:40– 11:00EG106Installation of carbon nanotube synthesis into solid oxide fuel cell
solid oxide fuel cell
carbon nanotube
direct growth
ST-26736
(11:00–12:00) (Chair: Nakagaki Takao)
11:00– 12:00EG107[Invited lecture] Development of Energy Systems using Hydrogen from Renewable Energy
Renewable Energy
Hydrogen Energy System
High Temperature Electrolysis
ST-26704
(13:00–14:00) (Chair: Tsujiguchi Takuya)
13:00– 13:20EG113Strategy for Suppressing Water Uptake in High IEC Anion Exchange Membranes with Thermally Convertible Polymer System
Water uptake
Solid alkaline fuel cells
Aromatic backbone
ST-26931
13:20– 13:40EG114Engineering Palladium Nanocatalysts as High Efficient Anode Catalysts for Alkaline Direct Alcohol Fuel Cells (DAFCs)
Alkaline Fuel Cell
Anode Catalyst
Ethanol Oxidation Reaction
ST-26512
13:40– 14:00EG115Design and synthesis of highly durable aromatic anion exchange membrane for solid-state alkaline fuel cell application
Anion exchange membrane
Fuel cell
Molecular design
ST-26799
(14:00–14:40) (Chair: Oshiba Yuhei)
14:00– 14:20EG116Analysis and current-voltage characteristic for air-oxidized electrode material of a redox flow battery
Vanadium redox flow battery
Air oxidation
Reaction resistance
ST-2669
14:20– 14:40EG117Electrode designing for direct formic acid fuel cell using fibrous catalyst
Direct formic acid fuel cell
Mass transport
Catalyst layer
ST-26221
Hall FA(General Education Building One 1F 111)
SY-65 [Symposium of Division of Chemical Reaction Engineering]
Poster Session with Flash Presentation
(10:40–12:00) (Chair: Kobayashi Daisuke, Sato Takafumi)
10:40– 12:00PA101Transient defluidization phenomena due to gas adsorption in a fluidized catalyst bed
(Kagoshima U.) *(Stu·PCEF)Taira Y., (Reg)Kai T., (Reg)Nakazato T.
Reactor
Fluidized bed
Defluidization
SY-65250
PA102Mechanism of influence of gas properties on bubble behavior in a fluidized catalyst bed
(Kagoshima U.) *(Stu·PCEF)Hiromori Y., (Reg)Kai T., (Reg)Nakazato T.
Reactor
Fluidized bed
Bubble
SY-65343
PA103Deoxygenation of vegetable oil on FCC catalyst
catalytic cracking
deoxygenation
vegetable oil
SY-651022
PA104Resistivity of aluminum-doped zinc oxide thin film prepared by low pressure CVD
CVD
Al-dope zinc oxide
resisitivity
SY-65826
PA105CFD Study for Fabrication of Ceramic Matrix Composites by Chemical Vapor Infiltration
CMC
SiC preform
CVI simulation
SY-65837
PA106Oxidative dehydrogenation of isobutane over binary catalysts doped on SBA-15
SBA-15
Oxidative dehydrogenation
Isobutane
SY-6519
PA107Solvent effects in selective hydrogenation of 4-Ketoisophorone over supported Pd catalysts
heterogeneous catalysis
hydrogenation
selectivity
SY-65483
PA108Epoxidation of propylene on various reduced metal-doping catalysts
Epoxidation
Propylene
Metal-doping catalysts
SY-6520
PA109Kinetic measurement over Pt/TiO2 and Ni/CeO2 for designing process combined hydrogenation and dehydrogenation
Methylcyclohexane dehydrogenation
CO2 methanation
Kinetic analysis
SY-65724
PA110Methylcyclohexane dehydrogenation over Y-doped Pt catalyst
methylcyclohexane dehydrogenation
Yttrium
Platinum catalyst
SY-65839
PA111Effect of gaseous oxygen on catalytic conversion of propylene over bismuth-molybdenum complex oxides
Propylene
Catalytic oxidation
Bismuth-molybdenum
SY-6521
PA112Influence of Particle Morphology of Carbon Supported Metal Catalyst on Activity
Catalyst
Methanol steam reforming reaction
Woody biomass
SY-65863
PA113Hydrodeoxygenation of phenol using proton conductor as catalyst support
hydrodeoxygenation
phenol
proton conductor
SY-65975
PA114Production of xylose and xylo-oligosaccharides from finely ground bagasse using a hydrothermal treatment
Hydrothermal Treatment
Bagasse
Xylose and Xylo-oligosaccharide
SY-65350
PA115Experimental and Numerical Study on Non-Catalytic Oxidation of Methane at Pressurized Condition with a Flow Reactor
methane oxidation
high pressure
flow reactor
SY-65579
PA116Fundamental Study on Calcium Phosphate Recovery from Incineration Ash of Chicken Manure
Calcium Phosphate
Chicken Manure
Incineration Ash
SY-6522
PA117Effect of ultrasound irradiation on nano-exfoliative dispersion of α-zirconium phosphate
ultrasound
cavitation
nano-particles
SY-651011
PA118Effect of power frequency on various organic compounds(VOCs) decomposition using SPCP reactor
nonthermal plasma
VOC decomposition
power frequency
SY-65617
PA119Effect of Pulsed discharge in formation of Liner Oligopeptides from DKP
Hydrothermal
Pulsed discharge
Oligopeptide
SY-651056
PA120Bio-oil production from palm kernel shell (PKS) by solvolysis
palm kernel shell (PKS)
liquefaction
solvolysis
SY-65983
PA121Kinetic analysis of deoxygenation in co-processing of oxygenated aromatics and hydrogen donors in catalytic cracking process
catalytic cracking
hydrogen transfer reaction
deoxygenation
SY-65986
PA122Study on alkali catalyzed trans-esterification of canola oil and dimethyl carbonate under mild conditions
(Kagoshima U.) *(Stu)Ueda Y., (Reg)Kai T., (Reg)Nakazato T.
Esterification
Biodiesel
Dimethyl carbonate
SY-65344
PA123Utilization of catalytic cracking process for hydrocarbon fuel production from microalgae
fluid catalytic cracking
microalgae
hydrocarbon fuel
SY-651040
PA124Porosification of highly oriented oxide by chemical treatment
Porous
Chemical Treatment
SY-6577
PA125Reaction mechanism of carbon deposition on zinc ferrite for desulfurization sorbent
Carbon deposition
zinc ferrite
desulfurization
SY-65761
PA126Quantitative Understanding Coal Pyrolysis Mechanism by Integrating Information on Gas Formation Characteristics and Char Chemical Structures
coal
pyrolysis
chemistry
SY-65614
PA127A calculation technique not like Newton's method in the combustion calculation
combustion
calculation
technique
SY-65467
PA128Aldol condensation of ketone using micro flow reactor
micro flow reactor
aldol condensation
ketone
SY-65474
PA129Effect of Sn-doped In2O3 electrode on degradation characteristics of (Pb,La)(Zr,Ti)O3 capacitor
ferroelectric capacitor
ferroelectric
sol-gel
SY-65912
SY-74 [Symposium of Division of Biochemical Engineering]
The Forefront of Genome Editing - Hints to Chemical Engineers in Biomedical Field -
(13:00–14:40) (Chair: Kawabe Yoshinori, Sakai Shinji)
13:00– 13:40FA113[Invited lecture] Development of genome engineering techniques for animal cells
genome engineering
animal cell
biopharmaceutical production
SY-74161
13:40– 14:00FA115[Requested talk] Efficient genome engineering with direct protein delivery
genome engineering
protein delivery
SY-7427
14:00– 14:40FA116[Invited lecture] Development of in vivo genome editing technology and application for genome-editing therapy
genome editing
SY-7458
(14:40–15:00)
14:40– 15:00Author's interview
(15:00–16:40) (Chair: Kawabe Yoshinori, Fujita Satoshi)
15:00– 15:40FA119[Invited lecture] Chicken genome editing and production of recombinant protein into the egg
chicken
genome editing
recombinant protein
SY-74240
15:40– 16:00FA121[Requested talk] The potential of the artificial chromosome vector for manufacturing technology
manufacturing technology
artificial chromosome vector
protein
SY-7486
16:00– 16:20FA122Gene targeting stable chromosomes for recombinant protein production
Chinese hamster ovary
gene targeting
chromosomal stability
SY-74740
16:20– 16:40FA123Construction of a cell fate conversion system using a genome-editing tool
Cre recombinase
receptor engineering
cell fate conversion
SY-74656
(16:40–17:00)
16:40– 17:00Author's interview
Hall FB(General Education Building One 2F 121)
SY-53 [Symposium of Division of Fluid & Particle Processing]
Bubbles, Drops, and Particles Dispersion Engineering 2018
(9:20–10:20) (Chair: Yoshimoto Makoto)
9:20– 9:40FB102Bubble induced oxygen absorption at free surface
Bubble Column
Bubble burst
Oxygen absorption
SY-53930
9:40– 10:00FB103Effects of bubble interaction and diameter on gas holdups in bubble columns
Bubble swarm velocity
Bubble clustering
Effective bubble diameter
SY-53158
10:00– 10:20FB104Experimental analysis of ultrasonic cleaning with oxygen-supersaturated water
Ultrasonic cleaning
Acoustic cavitation
Dissolved gas supersaturation
SY-531016
10:20– 10:40Break
(10:40–12:00) (Chair: Homma Shunji, Ishigami Toru)
10:40– 11:00FB106Enhancement of release of hydrophilic molecules from phospholipid vesicles using bubbles
Liposomes
Bubbles
Permeability
SY-53124
11:00– 11:20FB107Numerical simulation of the temperature dependence of viscosity of highly viscous fluid and the influence of weir shape on liquid level in weir
lattice Boltzmann method
IGCC
slag
SY-5395
11:20– 11:40FB108Calculation Method for Dynamic Contact Angle based on Interface-Tracking Model
Dynamic Contact Angle
Interface-Tracking Model
Computational Fluid Dynamics
SY-53317
11:40– 12:00FB109Verification of surface flow model for solution with surfactant
Marangoni convection
Surfactant
Surface tension
SY-53239
(13:00–13:40) (Chair: Matsukuma Yosuke)
13:00– 13:40FB113[Review lecture] Gas-non-Newtonian liquid two-phase flow in a horizontal pipe
Two-phase flow
Non-Newtonian flow
Pipe flow
SY-53115
(13:40–14:40) (Chair: Fujioka Satoko)
13:40– 14:00FB115Numerical Analysis of the dynamics of a falling drop with a shear-thinning property impact on a quiescent fluid layer
Drop Impact
Shear-thinning Property
Numerical Analysis
SY-53458
14:00– 14:20FB116The motion of a rising droplet in a stagnant liquid
Front-Tracking
Drag coefficient
Drag force
SY-53577
14:20– 14:40FB117Separation and collection of airborne ultrafine particles using coarse droplets generated by ultrasonic atomization
ultrasonic atomization
ultrafine particle
particle collection
SY-53224
14:40– 15:00Break
(15:00–16:20) (Chair: Sakai Mikio, Ando Keita)
15:00– 15:20FB119Control of droplet generation by change of channel structure in cross-shaped microchannel
microchannel
3D-printer
droplet
SY-53980
15:20– 15:40FB120A numerical study of concentration effects on inertial focusing of particles flowing through microchannels
inertial focusing
microchannels
direct numerical simulation
SY-539
15:40– 16:00FB121Simulation of structure formation of solid-liquid-liquid dispersion
Solid-liquid-liquid dispersion
Direct numerical simulation
Structure formation
SY-53375
16:00– 16:20FB122Experimental study on particle flow through an orifice with an obstacle on solid-liquid two-phase flow
(Nihon U.) *(Stu)Udo K., (Reg)Ando T., (PIA) (Reg)Koike O., (U. Tokyo) (Reg)Tatsumi R.
solid-liquid two phase flow
obstacle
clogging
SY-53274
Hall FC(General Education Building One 2F 122)
SY-71 [Symposium of Division of Biochemical Engineering]
Role of Chemical Engineering (Food Engineering) in Food Science
(13:00–14:20) (Chair: Tatemoto Yuji, Yamada Yasushi)
13:00– 13:20FC113Integrated release analysis of volatile compounds from encapsulated yeast powder using DVS instrument
integrated release
yeast
relative humidity
SY-7116
13:20– 13:40FC114Study on Release Behaviour of 1-Methylcylopropene Coated Paper under Stepwise Humidity Change
1-Methylcylopropene
Coated paper
Release behaviour
SY-7130
13:40– 14:00FC115Effects of operational conditions on properties of carrots dried in fluidized bed under reduced pressure
Drying
Fluidized bed
Carrot
SY-71205
14:00– 14:20FC116Effect of wall materials on flavor release behavior from spray-dried and starch-coated powders
flavor
powder
spray-drying
SY-71193
(14:20–16:00) (Chair: Ohashi Tetsuya, Yoshii Hidefumi)
14:20– 14:40FC117Process of sugar production and the new sugar of 1,5-anhydro-D-fructose
(Sunus) (Cor)Yoshinaga K., (Cor)Ishiba H., *(Cor)Tagawa M.
process
sugar
SY-71264
14:40– 15:00Break
15:00– 15:20FC119Study on reduced pressure foam drying based on needle-stimulation-induced foaming
vacuum drying
foaming
needle stimulation
SY-71534
15:20– 15:40FC120Influence of High Frequency Dielectric Heating on Pasteurization during Vacuum Freeze Drying of Food Model
pasteurization
bacteria
high frequency dielectric heating
SY-71902
15:40– 16:00FC121Solubilization of hesperidin by use of pressurized hot water
solubilization
hesperidin
pressurized hot water
SY-7183
Hall FD(General Education Building One 2F 124)
SY-75 [Symposium of Division of Biochemical Engineering]
Next Generation Downstream Processing - Continuous Manufacturing Pros & Cons
(13:15–13:20)
13:15– 13:20Opening remark
(13:20–14:40) (Chair: Yamamoto Shuichi, Minakuchi Kazunobu)
13:20– 13:40FD114[Requested talk] Efforts to improve productivity for Bio manufacturing process
continuous
chromatography
SY-75565
13:40– 14:00FD115[Requested talk] Implementation for "End-To-End" type Continuous BioProcess by Integrated Unit Operation
Continuous Manufacturing
Acoustic Wave Separation
Virus Inactivation
SY-75376
14:00– 14:20FD116[Requested talk] Continuous operation of bio-chromatography with two columns
chromatography
continuous-operation
productivity
SY-751082
14:20– 14:40FD117[Requested talk] Intensification of protein A chromatography by productivity for monoclonal antibody processing
Protein A chromatography
Process intensification
Monoclonal Antibody
SY-75706
(15:00–16:20) (Chair: Yamamoto Shuichi, Ito Takao)
15:00– 15:20FD119[Requested talk] Application of simulated moving bed chromatography to pharmaceutical products
SMB
chromatography
pharmaceutical
SY-75945
15:20– 15:40FD120[Requested talk] Correlation between productivity and wash in continuous chromatography
Continuous
Chromatography
Wash
SY-75385
15:40– 16:00FD121[Requested talk] Increasing productivity of antibody capture chromatography step using highly functionalized affinity cellulose resins
antibody purification
affinity chromatography
highly crosslinked cellulose
SY-75759
16:00– 16:20FD122[Requested talk] Effect of Anion Exchange Chromatography Process on the Permeability of Virus Filter
AEX Chromatography
Virus filter
Mix-mode AEX
SY-75176
(16:20–17:40) (Chair: Yamamoto Shuichi, Ishihara Takashi)
16:20– 16:40FD123[Requested talk] Application of integrated flow-through purification in the continuous manufacturing of therapeutic monoclonal antibodies
chromatography
biologics
flow-through chromatography
SY-751090
16:40– 17:00FD124[Requested talk] Evaluation of the productivity for continuously operated chromatography
continuous
chromatography
productivity
SY-75192
17:00– 17:20FD125Continuous operation of bio-chromatography : Pros and Cons
chromatography
continuous-operation
productivity
SY-751081
17:20– 17:40Discussion
(Yamaguchi U.) (Reg)Yoshimoto Noriko, (Reg)Yamamoto Shuichi, (Kyowa Hakko Kirin) (Reg)Ishihara Takashi
Hall FE(General Education Building One 2F 125)
SY-54 [Symposium of Division of Fluid & Particle Processing]
Advance in Powder Process 2018
(13:15–13:20) (Chair: Seto Takafumi)
13:15– 13:20Opening remark
(13:20–14:40) (Chair: Seto Takafumi, Iijima Motoyuki)
13:20– 13:40FE114Characterization of particle collection by charged fibrous filters for suppression of UFP formation from laser printers
Laser printer
Ultrafine particle(UFP)
Charged fibrous filter
SY-5448
13:40– 14:00FE115Prevention of re-entrainment of particles captured on medium-performance filter media by atomizing APA solution and evaluation of their particle collection performance
re-entrainment
acrylamide polyampholyte (APA)
medium-performance filter
SY-5449
14:00– 14:20FE116Collection of carbon nanotubes by bag filters
Carbon nanotube
Air filter
Collection performance
SY-54600
14:20– 14:40FE117Utilization of woody biomass combustion ash optimized by its particle size
(Hiroshima U.) *(Stu·PCEF)Momen K., (Reg)Fukasawa T., (Reg)Ishigami T., (Reg)Fukui K.
woody biomass combustion ash
fertilizer
glue
SY-54445
14:40– 15:00Break
(15:00–16:40) (Chair: Higashi Hidenori, Namiki Norikazu)
15:00– 15:20FE119Surface-enhanced Raman Scattering by simultaneous Electrostatic Splaying of Ag nanoparticles and target molecules
Surface-enhanced Raman scattering
electrospraying deposition
SY-54108
15:20– 15:40FE120Nanoparticle coating on spherical porous particles and their effects on the water drying behaviors on their powder layer
Composite particle
Microstructure
Drying
SY-54428
15:40– 16:00FE121Reducing Flame Synthesis of Reduced Titanium Oxide by Clustered Microflames
Reduction Reaction
Nanoparticles
Diffusion Microflame
SY-54860
16:00– 16:20FE122Characterization of formation and evolution of indoor secondary organic aerosols (ISOAs) from VOCs derived from house-keeping wares and their countermeasure
Indoor secondary organic aerosol(ISOA)
Evolution
Particle formation
SY-5450
16:20– 16:40FE123Nucleation promotion through particle number density predicted by microwave irradiation
microwave
number density
nucleation
SY-54373
Hall FF(General Education Building One 3F 131)
SY-52 [Symposium of Division of Fluid & Particle Processing]
Cutting Edge Technologies for Transport Phenomena and Fluid Engineering 2018
(9:00–10:20) (Chair: Kaide Aya)
9:00– 9:20FF101Effect of surfactant and insoluble material on tiny droplet shape under vertically vibrating field
dynamic surface tension
droplet shape
numerical analysis
SY-52613
9:20– 9:40FF102Effects of operational condition and contactor sizes on flow behavior and drop size distributions in an annular centrifugal contactor
liquid-liquid dispersion
annular centrifugal contactors
mixing
SY-52500
9:40– 10:00FF103Comparison of Flow Homoginization inside Honeycomb by Propeller and Perforated Plate
Hot Film Anemometer
Flow Homoginization
Pressure Loss
SY-521067
10:00– 10:20FF104Quantitative Evaluation of Solute Dispersion in Complex Micro Channels
Solute transport
Dispersion
Complex channel
SY-52234
10:20– 10:40Break
(10:40–12:00) (Chair: Iwata Shuichi)
10:40– 11:00FF106Effects of molecular weight of polymers on interaction between polyethyleneglycol and fluid calculated by drag coefficient of a cantilever
Drag coefficient
Scanning probe microscopy
Polymer-fluid interaction
SY-52591
11:00– 11:20FF107Effects of extensional characteristics of polymer solutions and neighbor vortices on vortex shedding in two-dimensional turbulent flow
Turbulent
Drag Reduction
Vortices
SY-52516
11:20– 11:40FF108The Evaluation of Capillary Rheometer by Non-isothermal and Non-Newtoninan Flow Simulation
Non-Newtonian Fluid
Flow Simulation
SY-521059
11:40– 12:00FF109[The Outstanding Paper Award] A model for non-equimolar binary gas diffusion through pores in the region of molecular diffusion
Diffusion
Non-equimolar
Graham's law
SY-52177
(13:00–13:40) (Chair: Tanoue Shuichi)
13:00– 13:20FF113Influence of charge distribution on bubble rising dynamics in three-phase system
three-phase flow
electrolyte
diffuse interface model
SY-52327
13:20– 13:40FF114Transport phenomena of polymer melts in a contraction-expansion channel: a multiscale simulation approach
entangled polymer melt
multiscale simulation
SPH
SY-52529
(13:40–14:40) (Chair: Taniguchi Takashi)
13:40– 14:00FF115Evaluation of anisotropic thermal conductivity under steady state conditions
Anisotropic thermal conductivity
Steady State
Evaluation
SY-52971
14:00– 14:20FF116Extension of the scope of measurement of anisotropic thermal conductivity to resin of higher thermal conductivity
Anisotropic thermal conductivity
Resin of higher thermal conductivity
Steady state
SY-52966
14:20– 14:40FF117Effect of surface tension on momentum and mass transfer across wind-wave air-water interface
Two-phase flow
Mass transfer
Direct numerical simulation
SY-52842
(14:40–15:40) (Chair: Maekawa Munenori)
14:40– 15:00FF118Numerical study on multistability of Taylor vortex flow in shear-thinning fluid system
Taylor vortex flow
Multistability
Shear-thinning fluid
SY-52554
15:00– 15:20FF119CFD Benchmark Simulation of Erosion Rate in Various Geometries for Engineering Applications
CFD Simulation
Erosion Rate
Multi-phase Flow
SY-521039
15:20– 15:40FF120Development and optimization of production process of Bio-diesel fuel
Bio-diesel Fuel
Acid Value
Methyl Esterification
SY-52709
(15:40–16:40) (Chair: Misumi Ryuta)
15:40– 16:00FF121Numerical analysis of film formation in curtain coating
curtain coating
numerical simulation
OpenFOAM
SY-52420
16:00– 16:20FF122Growth of a pinhole in a thin liquid film of adhesives
Numerical simulation
VOF
Pinhole
SY-52432
16:20– 16:40FF123Numerical Analysis of Bubble Growth and Departure in Nucleate Boiling
Nucleate Boiling
Bubble Growth
Numerical Analysis
SY-52456
Hall FG(General Education Building One 3F 132)
SY-55 [Symposium of Division of Fluid & Particle Processing]
Science and Applications Relating to Powder and Particle Dispersion and Fluidization
(15:00–16:00) (Chair: Tatemoto Yuji)
15:00– 15:20FG119Dry upgrading of particulate mineral using vibro-fluidized bed
gas-solid fluidized bed
density segregation
gravity separation
SY-55422
15:20– 15:40FG120Dry gravity separation of construction waste residue using vibro-fluidized bed
gas-solid fluidized bed
density segregation
gravity separation
SY-55426
15:40– 16:00FG121Occurrence of bubbling behavior induced by external vibration in a fine cohesive powder bed
Fluidized bed
vibration
fine powder
SY-551032
(16:00–17:00) (Chair: Mawatari Yoshihide)
16:00– 16:20FG122Observation of bubble behavior in fluidized catalyst beds accompanied with mole number increase of fluidizing gas
(Kagoshima U.) *(Stu·PCEF)Ogata H., (Reg)Kai T., (Reg)Nakazato T.
Fluidized bed
Bubble
Gas volume increase
SY-55251
16:20– 16:40FG123Effect of pressure swinging on drying rate for fluidized bed drying
Drying
Fluidized bed
Pressure swinging
SY-55204
16:40– 17:00FG124Characterization of pulse operated loop seal in internally circulating fluidized bed
Pulse flow
Fluidized bed
Loop seal
SY-55349
Hall P(Student Community Plaza 2F Study Lounge 2,3,4)
13:00– 14:40PA101Transient defluidization phenomena due to gas adsorption in a fluidized catalyst bed
(Kagoshima U.) *(Stu·PCEF)Taira Y., (Reg)Kai T., (Reg)Nakazato T.
Reactor
Fluidized bed
Defluidization
SY-65250
PA102Mechanism of influence of gas properties on bubble behavior in a fluidized catalyst bed
(Kagoshima U.) *(Stu·PCEF)Hiromori Y., (Reg)Kai T., (Reg)Nakazato T.
Reactor
Fluidized bed
Bubble
SY-65343
PA103Deoxygenation of vegetable oil on FCC catalyst
catalytic cracking
deoxygenation
vegetable oil
SY-651022
PA104Resistivity of aluminum-doped zinc oxide thin film prepared by low pressure CVD
CVD
Al-dope zinc oxide
resisitivity
SY-65826
PA105CFD Study for Fabrication of Ceramic Matrix Composites by Chemical Vapor Infiltration
CMC
SiC preform
CVI simulation
SY-65837
PA106Oxidative dehydrogenation of isobutane over binary catalysts doped on SBA-15
SBA-15
Oxidative dehydrogenation
Isobutane
SY-6519
PA107Solvent effects in selective hydrogenation of 4-Ketoisophorone over supported Pd catalysts
heterogeneous catalysis
hydrogenation
selectivity
SY-65483
PA108Epoxidation of propylene on various reduced metal-doping catalysts
Epoxidation
Propylene
Metal-doping catalysts
SY-6520
PA109Kinetic measurement over Pt/TiO2 and Ni/CeO2 for designing process combined hydrogenation and dehydrogenation
Methylcyclohexane dehydrogenation
CO2 methanation
Kinetic analysis
SY-65724
PA110Methylcyclohexane dehydrogenation over Y-doped Pt catalyst
methylcyclohexane dehydrogenation
Yttrium
Platinum catalyst
SY-65839
PA111Effect of gaseous oxygen on catalytic conversion of propylene over bismuth-molybdenum complex oxides
Propylene
Catalytic oxidation
Bismuth-molybdenum
SY-6521
PA112Influence of Particle Morphology of Carbon Supported Metal Catalyst on Activity
Catalyst
Methanol steam reforming reaction
Woody biomass
SY-65863
PA113Hydrodeoxygenation of phenol using proton conductor as catalyst support
hydrodeoxygenation
phenol
proton conductor
SY-65975
PA114Production of xylose and xylo-oligosaccharides from finely ground bagasse using a hydrothermal treatment
Hydrothermal Treatment
Bagasse
Xylose and Xylo-oligosaccharide
SY-65350
PA115Experimental and Numerical Study on Non-Catalytic Oxidation of Methane at Pressurized Condition with a Flow Reactor
methane oxidation
high pressure
flow reactor
SY-65579
PA116Fundamental Study on Calcium Phosphate Recovery from Incineration Ash of Chicken Manure
Calcium Phosphate
Chicken Manure
Incineration Ash
SY-6522
PA117Effect of ultrasound irradiation on nano-exfoliative dispersion of α-zirconium phosphate
ultrasound
cavitation
nano-particles
SY-651011
PA118Effect of power frequency on various organic compounds(VOCs) decomposition using SPCP reactor
nonthermal plasma
VOC decomposition
power frequency
SY-65617
PA119Effect of Pulsed discharge in formation of Liner Oligopeptides from DKP
Hydrothermal
Pulsed discharge
Oligopeptide
SY-651056
PA120Bio-oil production from palm kernel shell (PKS) by solvolysis
palm kernel shell (PKS)
liquefaction
solvolysis
SY-65983
PA121Kinetic analysis of deoxygenation in co-processing of oxygenated aromatics and hydrogen donors in catalytic cracking process
catalytic cracking
hydrogen transfer reaction
deoxygenation
SY-65986
PA122Study on alkali catalyzed trans-esterification of canola oil and dimethyl carbonate under mild conditions
(Kagoshima U.) *(Stu)Ueda Y., (Reg)Kai T., (Reg)Nakazato T.
Esterification
Biodiesel
Dimethyl carbonate
SY-65344
PA123Utilization of catalytic cracking process for hydrocarbon fuel production from microalgae
fluid catalytic cracking
microalgae
hydrocarbon fuel
SY-651040
PA124Porosification of highly oriented oxide by chemical treatment
Porous
Chemical Treatment
SY-6577
PA125Reaction mechanism of carbon deposition on zinc ferrite for desulfurization sorbent
Carbon deposition
zinc ferrite
desulfurization
SY-65761
PA126Quantitative Understanding Coal Pyrolysis Mechanism by Integrating Information on Gas Formation Characteristics and Char Chemical Structures
coal
pyrolysis
chemistry
SY-65614
PA127A calculation technique not like Newton's method in the combustion calculation
combustion
calculation
technique
SY-65467
PA128Aldol condensation of ketone using micro flow reactor
micro flow reactor
aldol condensation
ketone
SY-65474
PA129Effect of Sn-doped In2O3 electrode on degradation characteristics of (Pb,La)(Zr,Ti)O3 capacitor
ferroelectric capacitor
ferroelectric
sol-gel
SY-65912
Hall P(Student Community Plaza 2F Study Lounge 2,3,4)
ST-27 [Trans-Division Symposium]
Novel Development in Batteries, Fuel Cells, Solar Cells and Other Energy Conversion/ Storage Technologies -From Nano Design to System Design- (Poster session)
(14:40–17:40)
14:40– 17:40PB101Production and separation of hydrogen using membrane in steam reforming
palladium membrane
steam reforming
membrane reactor
ST-2745
PB102Investigations of activated nitrogen gas phase in ammonia production through Plasma/Liquid interfacial reaction
Ammonia
Plasma
Activated nitrogen
ST-27270
PB103UV irradiation effect in ammonia production on P/L reaction locus
Ammonia
UV
Plasma
ST-27281
PB104Behavior of time progress of CO2 electrochemical reduction using Sn supported catalyst
Formic acid
Electrochemical reduction
Energy carrier
ST-27285
PB105Electrochemical reduction reaction of carbon dioxide(CO2) on binary Cu/Ni stacked electrodes
CO2 reduction
Binary Cu/Ni stacked electrodes
Ni electrodeposition
ST-27442
PB106Investigation of redox reaction kinetics for hydrogen production in three-reactor chemical-looping process using Ca-modified ilmenite as oxygen carrier
Chemical-looping combustion
Hydrogen production
CO2 capture
ST-27446
PB107Study on adsorption of hydrogen on carbon nanohorns dispersed with metal nano particles
carbon nanohorn
hydrogen
adsorption
ST-27616
PB108Observation and mechanism investigation of an anomalous reaction in a hydrogen-storage metal
(Kyoto U.) *(Stu·PCEF)Ono Shunsuke, (Reg·PCEF)Kitagawa Yuta, (Stu·PCEF)Uchikoshi Takeshi, (Reg)Tanabe Katsuaki
anomalous reaction
hydrogen-storage metal
ST-271019
PB109Study on graphene oxide membrane as electrolyte of a fuel cell
graphene oxide
fuel cell
electrolyte membrane
ST-27135
PB110Development of highly active electrode catalyst by ion beam irradiation on ceria contained support
Direct methanol fuel cell
Anode catalyst
Ion beam
ST-27136
PB111Methanol oxidation electrocatalyst using reduced graphene oxide support
graphene oxide
direct methanol fuel cell
electrocatalyst
ST-27208
PB112Investigation of structure of liquid diffusion layer for direct liquid fuel cell
DFAFC
Structure of diffusion layer
pore size distribution
ST-27275
PB113Study on support effect for fuel cell catalyst
chemisorption
fuel cell catalyst
support effect
ST-27293
PB114Development of Pd catalysts for formate oxidation in solid alkaline fuel cell
Solid alkaline fuel cell
Formate oxidation
Electrocatalyst
ST-27741
PB115Performance evaluation of Acid-Alkaline Hybrid Fuel Cells using Carbon Alloy Catalysts
carbon alloy catalysts
acid-alkaline hybrid
fuel cell
ST-27798
PB116Analysis on Heat Transfer Phenomena in Single Cell of PEFC under High Temperature Condition when Changing Thickness of Components
PEFC
Heat Transfer Modeling
High Temperature Condition
ST-27160
PB117Influence of Components Thickness on Heat and Mass Transfer Phenomena in Single Cell of PEFC when Generated at High Temperature
PEFC
High Temperature Operation
Heat and Mass Transfer
ST-27272
PB118Proton conductivity of Nafion membranes in HT-PEFC application
Membrane characterization
PEFC
Conductivity
ST-27552
PB119Evaluation of property of low EW thin pore-filling electrolyte membrane for polymer electrolyte fuel cells
Polymer electrolyte fuel cell
Pore-filling membrane
Low EW perfluorosulfonic acid polymer
ST-27598
PB120Fabrication of a Co/N-doped carbon by using Co/2-mithylimidazole anchoring on ion exchange resin as efficient oxygen reduction electrocatalyst
oxygen reduction reaction
Co/N-doping
ion exchange resin
ST-27872
PB121Structural control and water management of PEFC cathode electrode using connected Pt-Fe catalyst
Carbon free
Polymer electrolyte fuel cell
Membrane electrode assembly
ST-27938
PB122Development of novel preparation method of low-platinum electrode for PEFC using core-shell reaction to the catalyst layer
Polymer electrolyte fuel cell
Cu-UPD
core-shell
ST-271048
PB123Relationship between proton conductivity and excess oxygen and deficiency in perovskite related material
SOFC
perovskite
electrolyte
ST-27278
PB124Direct carbon nanotube growth inside anode of solid oxide fuel cell
carbon nanotube
solid oxide fuel cell
direct growth
ST-27279
PB125Development of techno-economic assessment of solid oxide fuel cells
solid oxide fuel cell
techno-economic assessment
cell design
ST-27408
PB126Electrochemical Promotion of Ammonia Synthesis with Iron catalyst on Barium Cerate by Incipient Wetness Impregnation Method
Ammonia Electrosynthesis
Iron Based Catalyst
Electrochemical Promotion
ST-27782
PB127Physical and electrochemical characterizations of LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries prepared by spray pyrolysis with heat treatment
Cathode
Lithium ion batteries
Spray pyrolysis
ST-27407
PB128Artificial intelligence induction of analysis parameters in numerical model of Li battery performance
Lithium-air battery
machine learning
Polarization curve
ST-27517
PB129Effect of Electrode catalysis additives on cell performance of lithium air battery
Lithium air battery
Cell performance
Electrode catalysis
ST-27609
PB130Identifying material parameters with performance measurement and numerical simulation for LIB structure design
lithium ion battery
numerical simulation
Porous electrode
ST-27702
PB1313D simulation of solid state battery cathode3D simulation of solid state battery cathode considering the interfacial resistance considering the interfacial resistance
Solid state battery
Active material coating
Interfacial resistance
ST-27821
PB132Electric double layer capacitor characteristics of thermosetting resin-based activated carbon prepared with supercritical fluid
supercritical fluid
activated carbon
EDLC
ST-27995
PB133Control of Structure of Organic-Inorganic Hybrid Perovskite Thin Films for Solar Cell Devices Using Ultrasonic Spray Method
Perovskite Solar Cells
Thin Films
Ultrasonic Spray Method
ST-27731
PB134Electrodeposition of iron sulfide and consideration of application to dye sensitized solar cells
iron sulfide
electrodeposition
ST-27834
PB135Electrodeposition of ZnS and control of its band structure by Cu doping
ZnS
photocatalyst
electrodeposition
ST-27855
PB136Semiconductor wafer bonding in non-cleanroom environment for high-efficiency low-cost photovoltaic applications
semiconductor wafer bonding
solar cell
silicon
ST-271046
PB137Study on Thermo-physical Properties of Several Fatty Acids and Their Mixture for Multi Stage Heat Exchange System
Phase change
Latent heat storage
Thermo-physical property
ST-27575
PB138Study on Multi stage Heat Exchange System Using Two Kinds of Latent Thermal Storage Materials with a Different Melting Points
phase change
thermal storage
heat exchange
ST-27583
PB139Evaluation on hydration / dehydration behavior of LiOH particle layer for high thermal storage density
Hydration / Dehydration
Chemical heat storage
Lithium hydroxide
ST-27992

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 50th Autumn Meeting (Kagoshima, 2018)

© 2023 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact SCEJ 50th Autumn Meeting Organizing Committee
E-mail: inquiry-50fwww3.scej.org