Japanese page
SCEJ

SCEJ 48th Autumn Meeting (Tokushima, 2016)

Last modified: 2016-09-07 09:49:00

Hall and day program : Day 1

The third-day program of ST-12 (Hall D) was partly changed. ST-12 Program (The yellow-backed area is affected.)

Day 1(Sep. 6)

Hall A | Hall B | Hall C | Hall D | Hall E | Hall F | Hall G | Hall H | Hall I | Hall J | Hall K | Hall L | Hall L | Hall M | Hall N | Hall O | Hall P | Hall Q | Hall R | Hall S | Hall T | Hall U | Hall V | Hall W | Hall X | Hall Y
SP-1 | SY-60 | SY-64 | ST-12 | SY-77 | SY-78 | ST-14 | SY-79 | SY-66 | ST-18 | HQ-21 | SY-57 | SY-75 | SY-65 | ST-13 | ST-17 | SY-82 | SY-56 | SY-85 | SY-52 | SY-86 | HQ-22 | SY-83 | SY-88 | SY-69 | SY-68 | SY-53 | SY-55

TimePaper
ID		Title / AuthorsKeywordsTopic codeAck.
number
Hall A(Bldg.K 2F K206)
SP-1 Innovations in Separation Engineering
(10:00–12:00) (Chair: Matsuda Kazuo, Nakaiwa Masaru)
10:00– 10:20Introduction of the Special Symposium(SP-1)
(JST) Nagano Tomomi
10:20– 10:40A105[Keynote lecture] Innovations Expected to Separation Engineering
separation
innovation
technologies
SP-1272
10:40– 11:00A106[Invited lecture] Perspective of Membrane Materials and Potential Use in Gas Separation
gas separation
membrane technology
membrane materials
SP-1273
11:00– 11:20A107[Invited lecture] Design of Porous Coordination Compounds and Their Highly Selective Molecular Adsorption Functions
Porous Coordination Polymer
Metal-Organic Framework
Gas Adsorption
SP-1274
11:20– 11:40A108[Invited lecture] Development of the Innovative High-Performance Separation Material
advanced material
hybrid system
rational design
SP-1275
11:40– 12:00Discussion 1
(13:00–17:00) (Chair: Matsuda Kazuo, Nakaiwa Masaru)
13:00– 13:20A113[Invited lecture] Foam Enables Selective Recovery of Valuable Metals
foam separation
surfactant
precious metal ion
SP-1276
13:20– 13:40A114[Invited lecture] Smelting and Refining Processing for Future
Rare metal processing
Metallurgy
Phase Separation
SP-1278
13:40– 14:00A115[Invited lecture] Method and Expectation for Recovering Valuable Metal from Refining Process in Non-Ferrous Metals Separation
(Mitsui Mining & Smelting) Noda Shinji
nonferrous metals
refining
smelting
SP-1279
14:00– 14:20Discussion 2
14:40– 15:00A118[Invited lecture] Microfluidic Separation of Biological Materials
Microfluidics
MicroTAS
Lab-on-a-Chip
SP-1280
15:00– 15:20A119[Invited lecture] Possibility of Bio-Inspired Separation Utilizing Self-Organizing System
Bio-Inspired Chemical Engineering
Self-assembly
Chiral Recognition
SP-1283
15:20– 15:40A120[Invited lecture] The Impact of Membrane Technology for the Biopharmaceutical Manufacturing
biopharmaceutical
refining
separation
SP-1284
15:40– 16:00Discussion 3
16:00– 17:00A122General Discussion, Panel Discussion
Separation
Innovation
SP-11009
Hall B(Bldg.K 2F K201)
SY-60 Symposium of Division of Separation Processes (4) New Development of Particle-Fluid Separation Process
(9:00–10:00) (Chair: Kawakita Hidetaka, Yoshida Yuichi)
9:00– 9:20B101Effect of freezing and thawing treatment to nickel wastewater treatment with sodium hypochlorite
Freezing and Thawing treatment
Sodium hypochlorite
Nickel wastewater
SY-60369
9:20– 9:40B102Development of dielectrophoretic particle separator using carbon nanotube electrodes
(Kyoto U.) *(Ful)Sano N., (Ful)Tamon H.
dielectrophoresis
carbon nanotube
particle separation
SY-601001
9:40– 10:00B103Removal of conductive particle impurities from silica dispersion liquid by a flow dielectrophoretic
(Kyoto U.) *(Stu·PCEF)Tsubouchi K., (Ful)Sano N., (Ful)Tamon H.
particle separation
dielectrophoresis
silica particle
SY-60448
(10:00–11:20) (Chair: Kawasaki Kenji, Iijima Shigeru)
10:00– 10:20B104Development of a calcium carbonate scale catching device for hot water supply and heating system in Europe
Calcium Carbonate Scale
Hardness
Hot Water Supply
SY-60531
10:20– 10:40B105Filtration of colloidal particles using magnetite-assembled structure
filtration
magnetite
colloidal particle
SY-60225
10:40– 11:00B106Preparation of 3D structure chitosan membranes with the aid of a 3D printer
chitosan
membrane
3D printer
SY-60599
11:00– 11:20B107Effects of filtering conditions and solution properties on performances of surface modified porous membranes
surface modification
membrane
SY-60979
(11:20–12:00) (Chair: Katagiri Nobuyuki)
11:20– 12:00B108[Review lecture] Analysis and Prediction of RO Membrane Fouling Phenomena
Reverse osmosis
Biopolymer
Concentration polarization
SY-6066
(13:00–13:40) (Chair: Iritani Eiji)
13:00– 13:40B113[Review lecture] Present status of air filters and their new applications
Collection performance
Nanofiber
Classification
SY-6022
(13:40–15:20) (Chair: Nakamura Kazuho, Kondou Kiyohisa)
13:40– 14:00B115Improvement in filtration performance of nanofiber fabric membrane by using atmospheric pressure plasma
(Nagoya U.) *(Stu)Takayama Y., (Stu)Hayashi Y., (Stu)Mano K., (Stu)Takahashi S., (Ful)Kanda H., (Ful)Goto M., (Ful)Mukai Y.
nanofiber membrane
atmospheric pressure plasma
filtration rate
SY-60965
14:00– 14:20B116Modelling and CFD analysis of constant rate filtration process by dynamic filter with pleated filter medium
dynamic filtration
filtration model
CFD analysis
SY-60964
14:20– 14:40B117Control for thickness of a cake layer on the flat sheet membrane (5)
aeration
loss factor
air bubble
SY-60231
14:40– 15:00B118Effect of particle type on gap between particles and surface charge density in cake layer
Cake layer
streaming potential
surface charge density
SY-60304
15:00– 15:20B119Role of Liquid Content within Cake in Evaluation of Variable Pressure Ultrafiltration of Protein Solution
ultrafiltration
cake filtration
nano-colloid
SY-60737
(15:20–17:00) (Chair: Mukai Yasuhito, Kato Yoshihiro)
15:20– 15:40B120Analysis of consolidation behavior of new centrifugal dewatering method with bypass discharge mechanism
centrifuge
dewatering
bypass discharge
SY-60587
15:40– 16:00B121Ceramic Filtration Characteristics of Humic Acid Solution Applying the Calcium Ion Dosage Method
humic acid
calcium ion
ceramic membrane
SY-60855
16:00– 16:20B122Promotive Effect of Metal Ion Addition for Polysaccharide Recovery on Membrane Separation
Membrane Separation
Polysaccharide Recovery
Metal Ion Addition
SY-60184
16:20– 16:40B123Efficient Production of Dye Decolorization Enzyme by Utilizing Blackstrap Molasses and Construction of Membrane Reactor
membrane reactor
decolorization
dye
SY-60744
16:40– 17:00B124Relationship between the behavior of Biomass Support Particles and the Immobilization of the Photosynthesis Microorganism in a Taylor Vortex Flow
Taylor Vortex Flow
Biomass Support Particles
Immobilization
SY-60914
Hall C(Bldg.K 2F K202)
SY-64 Symposium of Division of Separation Processes (8) Cutting Edge Technology for Membranes and Membrane Processes
(13:00–14:00) (Chair: Matsuyama Hideto)
13:00– 13:20C113Case studies of water treatment technology using the membrane filtration
membrane
water treatment
SY-64160
13:20– 13:40C114Development of Cellulose Tri-Acetate Hollow Fiber Reverse Osmosis Membrane for Seawater Desalination and its Optimal Operations in the Middle East
desalination
reverse osmosis
fouling
SY-64360
13:40– 14:00C115Introduction of Asahi Kasei's Protein Adsorption Membrane
hollow fiber membrane
adsorption
ion exchange
SY-64567
(14:00–15:40) (Chair: Nomura Mikihiro)
14:00– 14:20C116Development of low energy consumption MBR process
membrane bioreactor
low energy
high flux operation
SY-64131
14:20– 14:40C117High flux type hollow fiber membrane with hydrophilic PVDF
hollow fiber membrane
hydrophilic
flux
SY-64606
15:00– 15:20C119Proposal for the Use of Fouling Potential in Water Purification and Application of a Submerged Membrane Filtration System
membrane fouling
submerged membrane
energy saving
SY-64403
15:20– 15:40C120Fractionation and characterization of organic matter for RO membrane fouling.
Reverse osmosis membrane
Organic foulants
Fractionation analysis
SY-64473
(15:40–16:20) (Chair: Matsukata Masahiko)
15:40– 16:00C121Development of porous alumina substrates for inorganic membranes
inorganic membrane
substrate
porous
SY-6499
16:00– 16:20C122Application development of Zeolite membrane
zeolite
membrane
food
SY-6477
Hall D(Bldg.K 3F K309)
ST-12 Batteries, Fuel Cells, Solar Cells and Energy Conversion and that Future -How Can Chemical Engineering Contribute for Them by Material, Processing and System?- (Oral Presentation Category)
(9:20–9:40) (Chair: Inoue Gen)
9:20– 9:40Introduction of the Symposium
(9:40–11:00) (Chair: Uemiya Shigeyuki)
9:40– 10:00D103Development of the hydrogen production system by electrolysis of water using a hydrogen permeable palladium membrane electrode
elecrtolysis of water
hydrogen permeable membrane
hydrogen production
ST-12435
10:00– 10:20D104Hydrogen Production Using Multi Solid Oxide Elctrolysis Cell stacks
hydrogen production
SOEC
ST-12571
10:20– 10:40D105Effect of the catalyst support on the formic acid production by the CO2 electrochemical reduction and the formic acid electrochemical oxidation reaction activity
Formic acid
Electrochemical reduction of CO2
Direct formic acid fuel cell
ST-12673
10:40– 11:00D106Investigation of the reaction mechanism in the selective oxidation using a PAFC-type reactor
selective oxidation
fuel cell type reactor
ST-12746
(11:00–12:00) (Chair: Tsujiguchi Takuya)
11:00– 12:00D107[Invited lecture] Ammonia as a Hydrogen Energy Carrier
Ammonia
Hydrogen%20Energy%20Carrier">Hydrogen Energy Carrier
Hydrogen
ST-1275
(13:00–14:00) (Chair: Tsujiguchi Takuya)
13:00– 13:20D113Novel electrolytic synthesis of organic hydrides by using microemulsion reaction field
hydrogenation
organic hydride
microemulsion
ST-1240
13:20– 13:40D114Electrochemical synthesis of ammonia using mixed protonic-electronic and mixed oxide ionic-electronic conducting cathode
ammonia
proton conductor
electrolysis
ST-1295
13:40– 14:00D115Highly selective methylcyclohexane production by photoelectrochemical hydrogenation of toluene using SrTiO3 photoanode
organic hydrides
methylcyclohexane
photoelectrochemistry
ST-12130
(14:00–14:20) (Chair: Inoue Gen)
14:00– 14:20General Discussion (Electrochemical Energy Conversion)
Hall E(Bldg.K 3F K303)
SY-77 Symposium of Division of Biochemical Engineering (5) Strategy of Biotechnology to Implementation of Advanced Water Treatment Process
(9:00–10:20) (Chair: Hori Katsutoshi, Nakasaki Kiyohiko)
9:00– 9:40E101[Review lecture] High-performance treatment of wastewater containing high concentrations of fats and oils through biocontrol
fats and oils
biocontrol
wastewater treatment
SY-77129
9:40– 10:00E103[Invited lecture] Material development strategy to control microbes for wastewater treatment
quorum sensing
biofilm
autoinducer
SY-77140
10:00– 10:20E104[Requested talk] High performance fermentative methane production system
Bio-methane
microbial consortium
stable methane production
SY-77146
(10:40–12:00) (Chair: Kimbara Kazuhide, Okutsu Noriya)
10:40– 11:20E106[Invited lecture] Large-scale production of bacterial consortia containing the genus Dehalococcoides and field demonstration of bioaugmentation with the consortia
chlorinated solvent
groundwater
bioaugmentation
SY-77339
11:20– 11:40E108[Invited lecture] Isolation and characterization of a bacterial strain that degrades cis-dichloroethene in the absence of aromatic inducers
chlorinated ethenes
bioaugmentation
monooxygenase
SY-77337
11:40– 12:00E109[Invited lecture] Development of a treatment system for arsenic contaminated water using arsenic hyperaccumulator plant
arsenic
phytoremediation
arsenic hyperaccumulator
SY-77336
SY-78 Symposium of Division of Biochemical Engineering (6) Frontiers of Chemical Engineering That Contributes to Food Industries of the Future: From Food Manufacturing to Food Digestion
(13:00–13:40) (Chair: Nakauma Makoto)
13:00– 13:40E113[Invited lecture] Texture Sensing of Food for Aged People by Using Robotic
Texture Sensing
Masticatory Simulation
Pressure Distribution Analysis
SY-78161
(13:40–14:40) (Chair: Imamura Koreyoshi, Oshima Tatsuya)
13:40– 14:00E115Effect of mechanical properties of hydrogels on their disintegration behavior in a human gastric digestion simulator
Gastric digestion simulator
Hydrogel
Mechanical properties
SY-78398
14:00– 14:20E116Mixing characterization of liquid gastric contents using continuous-type Human Gastric Digestion Simulator
Gastric digestion simulator
Peristalsis
Mixing characterization
SY-78705
14:20– 14:40E117Structural changes in casein aggregates under simulated gastric conditions
sodium caseinate
aggregate
simulated digestion
SY-78885
(15:00–16:20) (Chair: Hashimoto Atsushi)
15:00– 15:20E119Preparation of a peptide originating from the C-terminal of β-casein as a dispersant
paclitaxel
peptides
dispersibility
SY-78619
15:20– 15:40E120A study of digested peptides for enhancing dispersibility of poorly water soluble ingredients
poorly water soluble
dispersibilty
peptide
SY-78285
15:40– 16:00E121Over-dissolution of water-insoluble substance by surfactant-free solid dispersion
solid dispersion
sugar
surfactant free
SY-78770
16:00– 16:20E122Protein adsorption control by an external electric potential and the application to enzymatic cleaning of metal surface
protein adsorption
surface potential
enzymatic cleaning
SY-78785
(16:20–17:00) (Chair: Kobayashi Isao)
16:20– 17:00E123[Invited lecture] Fundamental physical properties and application to food development of welan gum
welan gum
rheology
processed food
SY-78177
(17:00–18:00) (Chair: Ichikawa Sosaku, Nakagawa Kyuya)
17:00– 17:20E125Effects of oil-droplet diameter on squalene stability in oil-in-water emulsion
squalene
stability
o/w emulsion
SY-78639
17:20– 17:40E126Thermal isomerization of all-trans-lycopene using liquefied dimethyl ether
isomerization
lycopene
dimethyl ether
SY-78975
17:40– 18:00E127Infrared Spectroscopic Evaluation of Brewed Coffee
brewed coffee
quality
infrared spectroscopy
SY-78237
Hall F(Bldg.K 4F K407)
ST-14 New Developments of Research for Physical Properties in Sub- and Supercritical Fluids
(9:00–10:00) (Chair: Yamamoto Hideki, Suzuki Shogo)
9:00– 9:20F101Precipitation behavior of polymer solutions induced by high pressure CO2 - A discussion on the solubility parameter
CO2 painting
poor solvent
phase equilibria
ST-14243
9:20– 9:40F102Precipitation behavior of polymer solutions induced by high pressure CO2:In consideration of VLE for CO2+solvent systems
CO2 painting
poor solvent
phase equilibria
ST-14229
9:40– 10:00F103Measurement and Correlation of glass transition point of CO2/ pharmaceutical polymer systems
Glass transition temperatures
Carbon dioxide
polymer
ST-14849
(10:00–10:40) (Chair: Sato Yoshiyuki, Hayasaka Noriaki)
10:00– 10:20F104Analysis of association and vaporization on partition coefficient of hydrophilic drug between supercritical carbon dioxide and water phases
supercritical carbon dioxide
hydrophilic drug
partition coefficient
ST-14674
10:20– 10:40F105Calculation of Hansen solubility parameter of mixed solvents
Hansen solubility parameter
Mixed solvent
Non ideal liquid
ST-14590
(10:40–11:20) (Chair: Okajima Izumi)
10:40– 11:20F106[Invited lecture] MD and NMR studies on dynamics in supercritical water
Supercritical water
self-diffusion
NMR spectroscopy
ST-14251
(11:20–12:00) (Chair: Tomida Daisuke)
11:20– 12:00F108[Invited lecture] Development of a small-sized MEMS (Micro Electro-Mechanical systems) viscosity sensor
Viscosity
Sensor
MEMS
ST-14377
(13:00–13:40) (Chair: Tomida Daisuke)
13:00– 13:40F113[Review lecture] Measurements of Hydrogen Thermophysical Properties and Applications of the Database System for High-Pressure Hydrogen Infrastructure
High-pressure hydrogen
Thermophysical properties
Database system
ST-14559
SY-79 Symposium of Division of Supercritical Fluids
(13:40–14:40) (Chair: Uchida Hirohisa, Horikawa Yoshiteru)
13:40– 14:00F115Exfoliation process for hexagonal boron nitride by using supercritical fluid
Supercritical fluid
hexagonal boron nitride
nanosheets
SY-79300
14:00– 14:20F116Synthesis of flower-like metal-chalcogenide nanosheet under supercritical fluid reduction atmosphere
Supercritical ethanol
Sulfurization/Selenization
Metal-chalcogenides
SY-79306
14:20– 14:40F117Synthesis of Flower-like MoS2 by supercritical fluid sulfurization and its electrochemical property
supercritical fluid
two-dimensional nanosheets
electrochemical property
SY-79423
(15:00–15:40) (Chair: Kawasaki Shin-ichiro)
15:00– 15:40F119[Invited lecture] Observation of coating surface in spray coating process and visualization of VOC
Spray coating
VOC
Visualization
SY-79119
(15:40–16:40) (Chair: Ota Masaki, Kawajiri Satoshi)
15:40– 16:00F121Effects of Operational Factors on the Nanoparticles Production of (S)-(+)-Naproxen by RESS Using CO2
RESS
Supercritical CO2
S-(+)-Naproxen nanoparticles
SY-79582
16:00– 16:20F122Elucidation of Deposition Mechanism of Organic Semiconductor Thin Films by Rapid Expansion of Supercritical Solutions (RESS) Using Carbon Dioxide
RESS
Supercritical carbon dioxide
Thin films deposition mechanism
SY-79295
16:20– 16:40F123Development of metal thin film coating technique of nanoparticle using supercritical carbon dioxide
supercritical carbon dioxide
coating
nanoparticle
SY-79520
(16:40–17:00)
16:40– 17:00Student Awards Ceremony (ST-14)
Hall G(Bldg.K 4F K401)
SY-66 Symposium of Division of Chemical Reaction Engineering (2) Poster Session with Flash Presentation
(10:40–11:40) (Chair: Sato Takafumi, Nakagawa Keizo)
10:40– 11:00LQ101Highly Selective Oxidative Dehydrogenation of Isobutane to Isobutene on Mesoporous Silicas
oxidative dehydrogenation
isobutane
MCM-48
SY-6694
LQ102Kinetic study of methyl esterification of free fatty acids using ion-exchange resin
(Kagoshima U.) *(Stu·PCEF)Miyaji M., (Ful)Kai T., (Ful)Nakazato T., Kobaru S.
Biodiesel
Fee fatty acid
Ion exchange resin
SY-66651
LQ103Selective deoxygenation of furfural into BTXs over Cu-doped zeolite catalyst
Biooil
catalytic deoxygenation
Cu-doped zeolite catalyst
SY-66290
LQ104Reductive Decomposition of Nitrite on Pd Catalyst in Fixed-Bed Continuous Flow Reactor
reductive decomposition
nitrite
Pd catalyst
SY-6686
LQ105Impact assessment of reductants on CO2 Reduction Characteristics of Fe/TiO2 Photocatalyst
Photocatalyst
CO2 Reduction
Reductants
SY-66163
LQ106Photocatalytic degradation of phenol over Cu/TiO2/SiO2
Cu-doped photocatalyst
Titania/Silica
phenol
SY-66492
LQ107Partial Oxidation of Propylene on MCM-14 Doped with Various Cations
MCM-41
partial oxidation
propylene
SY-6683
LQ108Effect of improving heat and mass transfer properties on CO2 methanation over Ni/CeO2 structured catalyst
CO2 methanation
Structured catalyst
Heat and mass transfer
SY-66426
LQ109Comparison of CeO2 supports in CO2 methanation with NH3 as H2 source using supported Ru catalysts
CeO2
methanation
NH3
SY-66719
LQ110Catalytic property and Pt dropout suppression of Pt catalyst covered with cubic mesoporous silica for 4-nitrophenol reduction
silica coating
cubic mesoporous silica
Pt dropout suppression
SY-66799
11:00– 11:20LQ111Ammonia decomposition property of Ru-based honeycomb catalyst
(Shizuoka U.) *(Stu)Sugimoto T., Kawase M., (Nippon Steel & Sumitomo Metal) Suzuki K., (Shizuoka U.) (Ful)Watanabe R., Kohno Y., (Ful)Fukuhara C.
Ammonia decomposition
Ru-based catalyst
Structured catalyst
SY-66597
LQ112Reactivity evaluation of reactive oxygen species and flavonoids
Flavonoid
Reactive oxygen species
Reactivity evaluation
SY-66228
LQ113A method for DMC-BDF production to reduce by-produced glycerol
Biodiesel
Dimethyl carbonate
Recrystallization
SY-66655
LQ114Synthesis and characterization of Zr-containing microporous material
Layer silicate
Zirconium
Solid catalyst
SY-66969
LQ115Water treatment using dispersed photocatalyst particles under water evaporation
Photocatalytic reaction
Water treatment
Water evaporation
SY-66439
LQ116Effect of MnO2 catalyst on nonthermal plasma reactor for TCE(trichloroethylene) decomposition
nonthermal plasma
TCE decomposition
MnO2 catalyst
SY-66502
LQ117Degradation processing of persistent organic compound by cavitation-based hybrid processes
cavitation
hydrothermal oxidation
fenton-like reaction
SY-66148
LQ118Characterization of ammonia-containing water treatment by smoked chaff charcoal
Smoked chaff charcoal
Ammonia
Batch recirculation reactor
SY-66441
LQ119Influence of sample container volume on the thermal behavior of nitrocellulose with acid solution
Nitrocellulose
Spontaneous ignition
Thermal analysis
SY-66658
LQ120Analysis on Ketalization of Glycerol Using Simulated Moving Bed Chromatographic Reactor
Simulated moving bed
Glycerol
Ketalization
SY-66352
11:20– 11:40LQ121Preparation of nanoparticles induced by collision and calescence of two micro droplets ejected from inkjet nozzles
Inkjet-ejected droplet
droplet collision and calescence
mixing rate
SY-66288
LQ122Preparation of composite gel particles by microfluidic devices
microfluidic device
stimulus-responsive gel
composite gel particle
SY-66542
LQ123Experimental evaluation of the effect of microchannel mixing on a chemical reaction
recirculation
microchannel
elementary reactions
SY-66985
LQ124Analysis of consecutive reaction model considering direct contact in bubbling fluidized bed reactors
direct contact
bubbling fluidized bed
SY-66847
LQ125The formation control of polystyrene particle layer in the pulling method.
pulling method
polystyrene particle
formation control
SY-66708
LQ126Production of high-quality nanocellulose by using ion liquid combined with ball milling method
Nanocellulose
Ion liquid
Ball milling
SY-66289
LQ127Preparation of Monodisperse Solid Lipid Microcapsules in Microfluidic Devices
Microfluidics
Microcapsule
Monodispersity
SY-66433
LQ128Preparation of the zinc oxide thin film under various the substrate place by cold wall type CVD method.
CVD
Zinc oxide
transparent conductive film
SY-66918
LQ129Fabrication of Au nanopartices/magnetite nanoparticles-dispersed polyimide fine particles using a multi-step microreactor
microreactor
polyimide particles
multi-functionalization
SY-66800
LQ130Study on methane reforming reaction using new designed plate reactors II: reforming of methane-rich gases
plate-type reactor
methane reforming
low pressure
SY-66901
ST-18 Paris Agreement and Countermeasures of Climate Change
(13:00–14:20) (Chair: Takeshita Kenji)
13:00– 13:40G113[Invited lecture] The Paris Agreement: Its Impacts and Challenges
Paris Agreement
Decarbonization
Ratchet-up mechanism
ST-18790
13:40– 14:20G115[Invited lecture] National Energy and Environment Strategy for Technological Innovation towards 2050
Energy and Environmental Innovation Strategy
ST-18811
(14:20–15:40) (Chair: Kurosawa Atsushi)
14:20– 15:00G117[Invited lecture] A long term outlook for low carbon urban transport
low carbon urban transport
urbanization
innovation in transportation technologies
ST-18787
15:00– 15:40G119[Invited lecture] Future outlook of the building sector in low carbon society
ZEB
ZEH
saving energy
ST-18804
(15:40–16:20) (Chair: Otomo Junichiro)
15:40– 16:20G121[Review lecture] Status of Climate Engineering Research
Climate Engineering
Paris Agreement
ST-18609
Hall H(Bldg.K 4F K402)
HQ-21 Outlook of Future Energy Society Based on Energy Technologies: Publication Commemoration Symposium for the Energy Technology Roadmaps of Japan
(13:00–13:20) (Chair: Kato Yukitaka)
13:00– 13:20H113Report on the Publication of Energy Technology Roadmaps of Japan
energy technology
roadmap
Japan
HQ-21137
(13:20–14:00) (Chair: Nakagaki Takao)
13:20– 14:00H114[Invited lecture] Direction of energy measures under the Paris Agreement
Energy
Climate Change
The Paris Agreement
HQ-21133
(14:00–14:40) (Chair: Kato Yukitaka)
14:00– 14:40H116[Invited lecture] Decommissioning of the Fukushima Daiichi NPP-present situation and strategy-
decommissioning
Fukushima
strategy
HQ-21115
(15:00–15:40) (Chair: Koyama Michihisa)
15:00– 15:40H119[Invited lecture] Hydrogen as Power Storage
Hydrogen
Power Storage
HQ-21199
(15:40–16:20) (Chair: Fukushima Yasuhiro)
15:40– 16:20H121[Invited lecture] Industrie 4.0, The world with AI - The future of manufacturing industries -
Indurstrie 4.0
AI
Manufacturing industries
HQ-2192
(16:20–17:00) (Chair: Nakagaki Takao)
16:20– 17:00H123General discussion
General discussion
HQ-2167
Hall I(Bldg.K 5F K507)
SY-57 Symposium of Division of Separation Processes (1) Fundamentals and Applications of Separation Technology (Oral)
(9:00–10:20) (Chair: Shiomori Koichiro)
9:00– 9:20I101Development of effective treatment and reuse process of nitrous oxide
nitrous oxide
zeolite
molecular sieve
SY-57239
9:20– 9:40I102Effects of mixing two kinds of adsorbents on reactor performance
Adsorbent
Adsorption isotherm
Air conditioning
SY-57645
9:40– 10:00I103Experimental investigation on water adsorption / desorption behavior in silica-gel layer enhanced thermal conductivity
silica-gel
thermal conductivity
water adsorption / desorption
SY-57860
10:00– 10:20I104Computational Chemistry Study on the CO2 Physical Absorption Mechanisms Based on the Evaluation of Interactions between Solvent Molecules
solvation-diffusion
molecular dynamics
CO2 physical absorption
SY-57864
(10:20–11:40) (Chair: Yasuda Masahiro, Matsuda Satoru)
10:20– 10:40I105Control of pH sensitivity of polycrystalline diamond field-effect transistor sensor by termination control
polycrystalline diamond
termination control
pH sensor
SY-57709
10:40– 11:00I106Influence of tubular support properties on the preparation of high-silica *BEA type zeolite membrane
zeolite membrane
separation
*BEA type zeolite
SY-57832
11:00– 11:20I107Silicalite-1 membranes prepared on porous silica tubular support for separation of ethanol/water mixture.
zeolite membrane
separation
silica support
SY-57623
11:20– 11:40I108Surface analysis of vanadium alloy membrane for hydrogen separation from ammonia decomposed gas
Separation membrane
hydrogen
ammonia
SY-57226
(11:40–12:00) (Chair: Uezu Kazuya)
11:40– 12:00I109[The JCEJ Outstanding Paper Award] Solid-Liquid Separation Properties in Centrifugal Sedimentation of Bidisperse Colloidal Suspension
centrifugation
sedimentation
bidisperse suspension
SY-5765
(13:00–13:20) (Chair: Uezu Kazuya)
13:00– 13:20I113Effect of rapid heating on microwave-assisted synthesis of SAPO-34 membranes
Zeolite membrane
Microwave heating
Gas separation
SY-5724
(13:20–14:20) (Chair: Sotowa Ken-Ichiro)
13:20– 13:40I114Improvement of magnetic separation efficiency of soil particles in suspension by addition of temperature-responsive polymer
magnetic separation
soil particle
temperature-responsive polymer
SY-57882
13:40– 14:00I115Study of the Incorporation Behavior of Analogue and its Enantiomer in L-Val Crystallization
Crystallization
Branched Chain Amino Acid
Solid Solution
SY-57392
14:00– 14:20I116Polymorph control of L- glutamic acid by DFR heat exchanger
DFR heat exchanger
polymorph control
L-glutamic acid
SY-57749
(14:40–15:40) (Chair: Tochigi Katsumi)
14:40– 15:00I118Energy-Efficient Crude Distillation Process with Prefractionator
Crude distillation unit
Energy saving
Two-column operation
SY-576
15:00– 15:20I119Energy saving in propylene - propane separation using membrane - distillation hybrid process
Hybrid process
Energy saving
Propane Propylene
SY-57764
15:20– 15:40I120Study on an Interrelation between HETP and HTU for Packed Column Distillers
HETP
HTU
Packed Column
SY-573
(15:40–16:40) (Chair: Yamaki Takehiro)
15:40– 16:00I121Process Analysis for Development of Multistage Counter-current Evaporators
Multistage Evaporator
Falling liquid film
Depressurized evaporation
SY-575
16:00– 16:20I122Selection of Physico-Chemical Properties Necessary for Distillation Calculation Using CRANIUM
Cranium
distillation calculation
group contribution method
SY-57724
16:20– 16:40I123Composition distribution and separation performance of pressure driven distillation system
Distillation
Pressure distribution
SY-57418
Hall J(Bldg.K 5F K501)
SY-75 Symposium of Division of Biochemical Engineering (3) Roles of Chemical Engineering for Next Generation-Regenerative Medicine
(9:00–10:20) (Chair: Sakai Shinji)
9:00– 9:20J101Elucidation and regulation of heterogeneous cell behavior inside a multilayered skeletal muscle myoblast sheet
Cell sheet
Migration
Skeletal muscle myoblasts
SY-75605
9:20– 9:40J102Using Raman spectra for cell state identification
Raman
cell state
differentiation
SY-75112
9:40– 10:00J103Development of Skeletal Muscle on Chips and its Application to Regenerative Medicine and Drug Discovery
Microdevices
Skeletal muscle
Contraction force
SY-7597
10:00– 10:20J104Approach for three-dimensional tissue construction by label-free magnetic assembly
Cell Assembly
Magneto-Archimedes Effect
Label-free
SY-75173
(10:40–12:00) (Chair: Nagamori Eiji)
10:40– 11:00J106Bioactuator with cultured skeletal muscle tissues
Microfabrication
Tissue engineering
Skeletal muscle
SY-75312
11:00– 11:40J107[Invited lecture] Development of Bio 3D Printer for Organ regeneration
Tissue regeneration
Scaffold free
Bio 3D printing
SY-751006
11:40– 12:00J109Modification of cellular function with/without genetic transformation
Transfection
Transduction
Introduction to cells
SY-75917
(13:00–14:40) (Chair: Fujita Satoshi)
13:00– 13:40J113[Invited lecture] Current status of Bio-3D-Printer: Perspectives and issues
Bioprinting
Biofabrication
Bioassenbly
SY-7598
13:40– 14:00J1153D bioprinting using polymers possessing phenolic hydroxyl moieties
Bioprinting
Hydrogel
Tissue engineering
SY-75576
14:00– 14:20J116Numerical study of particle behavior for optimization of suspension culture of iPS cells
iPS cell
numerical simulation
suspension culture
SY-75540
14:20– 14:40J117Effect of substrate stiffness on human induced pluripotent stem cell culture
Human induced pluripotent stem cell
Mechanosensing
Soft substrate
SY-75437
(15:00–16:00) (Chair: Shimizu Kazunori)
15:00– 15:20J119Influence evaluation of oxygen concentration and supply to mesenchymal stem cells by oxygen permeable culture plate
Mesenchymal Stem Cells
Oxygen
Mass Production
SY-75745
15:20– 15:40J120Selective elimination of tumorigenic stem cells using hybrid liposomes and its application to regenerative medicine
regenerative medicine
tumorigenic stem cell
hybrid liposome
SY-75931
15:40– 16:00J121Cell sorting system using photo-responsive micro-wells
single-cell array
microwells
photo-responsive gel
SY-75190
Hall K(Bldg.K 5F K502)
SY-65 Symposium of Division of Chemical Reaction Engineering (1) Innovative Challenges of Chemical Reaction Engineering Contributing to Issue of Natural Resources, Energy and Environment
(9:40–10:40) (Chair: Kitakawa Naomi)
9:40– 10:00K103Oxidation of arsenious acid over supported-platinum catalysts in aqueous solution
Arsenious acid
Oxidation in aqueous solution
Platinum catalyst
SY-65937
10:00– 10:20K104Silicon purification of powder derived from waste solar cell modules by acid treatment
Solar cell
Silicon
Purification
SY-65345
10:20– 10:40K105Phosphorus recovery from wastewater of livestock using wasted bamboo material
Phosphorus recovery
Bamboo
Wastewater of livestock
SY-6547
(15:00–15:40) (Chair: Ninomiya Wataru)
15:00– 15:40K119[Review lecture] Preparation of various useful chemicals through heterogeneous catalytic oxidation
Mesoporous silicas
Oxidative dehydrogenation
Glycerol
SY-65120
(15:40–16:20) (Chair: Onoe Kaoru)
15:40– 16:20K121[Review lecture] Development of Microwave Chemical Reactor
Microwave reactor
Microwave heating
Scale up
SY-65121
(16:20–17:00) (Chair: Fukuhara Choji)
16:20– 17:00K123[Review lecture] Chemical Reaction Engineering for Efficient Use of Coal
Chemical reaction engineering
Coal
SY-65410
Hall L(Bldg.K 6F Studio)
ST-13 Batteries, Fuel Cells, Solar Cells and Energy Conversion and that Future -How Can Chemical Engineering Contribute for Them by Material, Processing and System?- (Poster Presentation Category)
(14:40–17:40)
14:40– 17:40LP101Charging simulation of lithium ion batteries with volume expansion of active materials
lithium ion battery
volume expansion
numerical simulation
ST-13102
LP102Preparation of LiFePO4 nanoparticle in carbon
LiFePO4
lithium ion battery
nanoparticle
ST-13451
LP103Structure control of Sn-Cu negative electrode prepared by electrodeposition for Na-ion batteries
tin
copper
negative electrode
ST-13194
LP104Effect of polymer adsorption state on cracking in organic-inorganic hybrid films
critical cracking thickness
polymer adsorption
drying suspension
ST-13179
LP105Consideration of making thin film perovskite solar cell with high transparency at long wavelength for tandem solar cell
Perovskite
Solar Cell
Tandem
ST-13923
LP106Introduction of metal nanoparticles and oxidation film into nanopores for plasmonic porous Si solar cells
Solar Cell
Metal Nanoparticle
Porous Silicon
ST-13932
LP107Structural evaluation and EDLC properties of active carbon from thermosetting resin with different diameter
EDLC
activated carbon
resin-based carbon
ST-13947
LP108Characterization of Ni anodes of solid oxide fuel cells using infrared spectra of adsorbed CO
SOFC
Ni anodes
Resistance for Carbon deposition
ST-13468
LP109Supported Ru based electrocatalysts for ammonia electrosynthesis using intermediate temperature proton-conducting electrolytes of CsH2PO4/SiP2O7
Electrosynthesis of ammonia
Energy carrier
Ru catalysts
ST-13478
LP110Development and evaluation of biomass gasifier for Solid Oxide Fuel Cells (SOFCs)
Biomass gasifier
Solid Oxide Fuel Cells
Modeling
ST-13731
LP111Power generation characteristics and improving mechanism of solid oxide fuel cell adding the third component in anode.
SOFC
fuel cell
anode
ST-13848
LP112Basic research on Closed type Electrodialysis Reversal Generation System using Nonaqueous solvent
Nernst potential
Reverse Electrodialysis
nonaqueous solution
ST-13879
LP113Fabrication of carbon nanotube polymer actuator using electrospinning method
actuator
carbon nanotube
electrospinning
ST-13553
LP114(withdrawn)

100595
LP115Selective oxidation of 2-propanol by PEFC reactor
PEFC reactor
cyclic voltammetry analysis
alcohol selective oxidation
ST-13740
LP116Effect of Ni,Li ratio on anode catalyst of SOFC type reactor
(Nagoya U.) *(Stu)Mori M., (Ful)Yamada H., (Ful)Tagawa T.
solid oxide fuel cell
partial oxidation
methane
ST-13474
LP117Formic acid oxidation activity and the Pd particle size after calcination of the Pd/C synthesized with stabilizer
Direct Formic Acid Fuel Cell
Pd nanoparticle
formic acid oxidation reaction
ST-13891
LP118Influence of the catalyst support on the behavior of the formic acid production by the electrochemical reduction of CO2
Electrochemical reduction of CO2
Faradaic efficiency
Energy career
ST-13230
LP119Fabrication of Mixed Protonic-Electronic Conducting cathode for Electrochemical Synthesis of Ammonia
Ammonia electrolysis
Proton conductor
Mixed ionic-electronic conductor
ST-13332
LP120Development of ilmenite-based oxygen carriers for hydrogen production and storage in chemical looping systems
(U. Tokyo) *(Stu)Miya K., (Ful)Otomo J.
chemical looping
oxide ion conductor
hydrogen production and storage
ST-13831
LP121The research of Z-Scheme tandem system for water splitting reaction under visible-light irradiation by 100mm-sq BiVO4 photocatalyst membrane
photocatalyst
Artificial photosynthesis
Hydrogen energy
ST-13192
LP122High-pressure hydrogen gas generation system without compressing
Hydrogen
formic acid
catalyst
ST-13896
LP123Influence of Mass Transfer Resistance on Oxygen Reduction Reaction in PEFC Cathode Catalyst Layers
polymer electrolyte fuel cell
oxygen reduction reaction
mass transfer resistance
ST-13904
LP124Facile fabrication of CuO nanocube@Fe-Co3O4 nanosheet array as a high-performance electrocatalyst for the oxygen reduction reaction
Water splitting
CuO/Fe-Co3O4 composite
Oxygen reduction reaction
ST-13271
LP125(withdrawn)

100791
LP126Power generation characteristics of a direct methanol fuel cell using noble PtRu/TCCNF catalyst
(Gunma U.) *(Stu·PCEF)Naito D., (Ful)Ishitobi H., (Ful)Nakagawa N.
Direct methanol fuel cell
TiO2 coated carbon nanofiber support
Catalyst layer
ST-13210
LP127Effect of fuel supply mode on the DMFC performance
Direct methanol fuel cell
Vapor feed
Fuel supply mode
ST-13328
LP128Design of thin and low equivalent weight electrolyte membrane with pore-filling method for polymer electrolyte fuel cells
Polymer electrolyte fuel cell
Pore-filling membrane
Low equivalent weight perfluorosulfonic acid polymer
ST-13359
LP129Development of pore-filling anion conducting membrane for solid-state alkaline fuel cell using highly cross-linked aromatic polyelectrolyte
Solid-state alkaline fuel cell
Anion exchange membrane
Cross-linking polymer
ST-13895
LP130Reaction and mass transport simulation of PEFC for the analysis of the key factors deteriorating the output performance in the catalyst layer
(Kyoto U.) *(Stu·PCEF)Kotoi R., (Ful)Inoue G., (Ful)Kawase M.
polymer electrolyte fuel cell
porous carbon black
mass transport model
ST-13159
Hall L(Bldg.K 6F Studio)
13:00– 15:00LQ101Highly Selective Oxidative Dehydrogenation of Isobutane to Isobutene on Mesoporous Silicas
oxidative dehydrogenation
isobutane
MCM-48
SY-6694
LQ102Kinetic study of methyl esterification of free fatty acids using ion-exchange resin
(Kagoshima U.) *(Stu·PCEF)Miyaji M., (Ful)Kai T., (Ful)Nakazato T., Kobaru S.
Biodiesel
Fee fatty acid
Ion exchange resin
SY-66651
LQ103Selective deoxygenation of furfural into BTXs over Cu-doped zeolite catalyst
Biooil
catalytic deoxygenation
Cu-doped zeolite catalyst
SY-66290
LQ104Reductive Decomposition of Nitrite on Pd Catalyst in Fixed-Bed Continuous Flow Reactor
reductive decomposition
nitrite
Pd catalyst
SY-6686
LQ105Impact assessment of reductants on CO2 Reduction Characteristics of Fe/TiO2 Photocatalyst
Photocatalyst
CO2 Reduction
Reductants
SY-66163
LQ106Photocatalytic degradation of phenol over Cu/TiO2/SiO2
Cu-doped photocatalyst
Titania/Silica
phenol
SY-66492
LQ107Partial Oxidation of Propylene on MCM-14 Doped with Various Cations
MCM-41
partial oxidation
propylene
SY-6683
LQ108Effect of improving heat and mass transfer properties on CO2 methanation over Ni/CeO2 structured catalyst
CO2 methanation
Structured catalyst
Heat and mass transfer
SY-66426
LQ109Comparison of CeO2 supports in CO2 methanation with NH3 as H2 source using supported Ru catalysts
CeO2
methanation
NH3
SY-66719
LQ110Catalytic property and Pt dropout suppression of Pt catalyst covered with cubic mesoporous silica for 4-nitrophenol reduction
silica coating
cubic mesoporous silica
Pt dropout suppression
SY-66799
LQ111Ammonia decomposition property of Ru-based honeycomb catalyst
(Shizuoka U.) *(Stu)Sugimoto T., Kawase M., (Nippon Steel & Sumitomo Metal) Suzuki K., (Shizuoka U.) (Ful)Watanabe R., Kohno Y., (Ful)Fukuhara C.
Ammonia decomposition
Ru-based catalyst
Structured catalyst
SY-66597
LQ112Reactivity evaluation of reactive oxygen species and flavonoids
Flavonoid
Reactive oxygen species
Reactivity evaluation
SY-66228
LQ113A method for DMC-BDF production to reduce by-produced glycerol
Biodiesel
Dimethyl carbonate
Recrystallization
SY-66655
LQ114Synthesis and characterization of Zr-containing microporous material
Layer silicate
Zirconium
Solid catalyst
SY-66969
LQ115Water treatment using dispersed photocatalyst particles under water evaporation
Photocatalytic reaction
Water treatment
Water evaporation
SY-66439
LQ116Effect of MnO2 catalyst on nonthermal plasma reactor for TCE(trichloroethylene) decomposition
nonthermal plasma
TCE decomposition
MnO2 catalyst
SY-66502
LQ117Degradation processing of persistent organic compound by cavitation-based hybrid processes
cavitation
hydrothermal oxidation
fenton-like reaction
SY-66148
LQ118Characterization of ammonia-containing water treatment by smoked chaff charcoal
Smoked chaff charcoal
Ammonia
Batch recirculation reactor
SY-66441
LQ119Influence of sample container volume on the thermal behavior of nitrocellulose with acid solution
Nitrocellulose
Spontaneous ignition
Thermal analysis
SY-66658
LQ120Analysis on Ketalization of Glycerol Using Simulated Moving Bed Chromatographic Reactor
Simulated moving bed
Glycerol
Ketalization
SY-66352
LQ121Preparation of nanoparticles induced by collision and calescence of two micro droplets ejected from inkjet nozzles
Inkjet-ejected droplet
droplet collision and calescence
mixing rate
SY-66288
LQ122Preparation of composite gel particles by microfluidic devices
microfluidic device
stimulus-responsive gel
composite gel particle
SY-66542
LQ123Experimental evaluation of the effect of microchannel mixing on a chemical reaction
recirculation
microchannel
elementary reactions
SY-66985
LQ124Analysis of consecutive reaction model considering direct contact in bubbling fluidized bed reactors
direct contact
bubbling fluidized bed
SY-66847
LQ125The formation control of polystyrene particle layer in the pulling method.
pulling method
polystyrene particle
formation control
SY-66708
LQ126Production of high-quality nanocellulose by using ion liquid combined with ball milling method
Nanocellulose
Ion liquid
Ball milling
SY-66289
LQ127Preparation of Monodisperse Solid Lipid Microcapsules in Microfluidic Devices
Microfluidics
Microcapsule
Monodispersity
SY-66433
LQ128Preparation of the zinc oxide thin film under various the substrate place by cold wall type CVD method.
CVD
Zinc oxide
transparent conductive film
SY-66918
LQ129Fabrication of Au nanopartices/magnetite nanoparticles-dispersed polyimide fine particles using a multi-step microreactor
microreactor
polyimide particles
multi-functionalization
SY-66800
LQ130Study on methane reforming reaction using new designed plate reactors II: reforming of methane-rich gases
plate-type reactor
methane reforming
low pressure
SY-66901
Hall M(Bldg.4/5 2F 4-201)
ST-17 CVD & Dry Processes - Reaction Engineering for Controlling Microstructure and Functions
(10:40–12:00) (Chair: Momose Takeshi)
10:40– 11:00M106[Invited lecture] Development of the uniform and high-quality thin film fabrication technique on large-area substrate under atmospheric-pressure with using mist
mist CVD
Leidenfrost effect
metal oxide functional thin film
ST-17601
11:00– 11:20M107Preparation of perovskite solar cell by spray-deposition process
perovskite solar cell
TiO2
spray-deposition
ST-17641
11:20– 11:40M108High speed deposition of aggregated film of silicon nano-particle using plasma jet CVD
CVD
plasma
nanoparticle
ST-17533
11:40– 12:00M109[The JCEJ Outstanding Paper Award] Effects of annealing on the morphology and porosity of porous TiO2 films fabricated by deposition of aerosol nanoparticles
Phase transformation
Plasma-enhanced CVD
Sintering
ST-17263
(13:00–14:00) (Chair: Kawakami Masato)
13:00– 13:20M113[Invited lecture] Development of ALD-Based Gas Barrier Films with Ultralow Moisture Permeation for Complicated Structures
atomic layer despoition
gas barrier film
water vapor transmission rate
ST-17412
13:20– 13:40M114Effect of underlayer materials on initial film growth of SiC-CVI
(U. Tokyo) *(Stu)Shima K., (Stu)Sato N., (Stu)Funato Y., (IHI) (Ful)Fukushima Y., (U. Tokyo) (Ful)Momose T., (Ful)Shimogaki Y.
CVD
SiC
methyltrichlorosilane
ST-17718
13:40– 14:00M115Effect of HCl gas addition to SiC-CVI process aiming for uniform infiltration
SiC
CVI
ST-17972
(14:00–15:00) (Chair: Noda Suguru)
14:00– 14:20M116Synthesis of thin films incorporating high aspect ratio particles by a PECVD method using gas and solid raw materials
Nanocomposite film
Carbon nanotube
Abnormal growth
ST-17264
14:20– 14:40M117Reaction mechanism of supercritical fluid deposition for Bi4Ti3O12
supercritical fluid deposition
reaction mechanism
Bi4Ti3O12
ST-17924
14:40– 15:00M118Ultra-porous carbon electrode fabricated from supercritical drying and application for lithium-air battery
porous carbon electrode
supercritical drying
lithium-air battery
ST-17678
Hall N(Bldg.4/5 2F 4-202)
SY-82 Symposium of Electronics Division: Materials and Process in Electronics
(11:00–11:20) (Chair: Kondo Kazuo)
11:00– 11:20N107Detection of cuprous ions by micro ring electrodes on a TSV side wall
Cuprous detection
micro electrode
TSV
SY-82588
(11:20–12:00) (Chair: Orita Nobuaki)
11:20– 12:00N108[Invited lecture] Progress of the current distribution analysis technology of electrolytic cell
electrolytic cell
current distribution analysis
calculation
SY-82650
(13:00–13:20) (Chair: Kondo Kazuo)
13:00– 13:20N113Fabrication of Fine-pitch Copper Wiring by Micro-contact Printing and Plating Using Nucleating Agent Ink
printed electronics
micro-contact printing
electrodeposition
SY-82101
(13:20–14:20) (Chair: Tokoro Kazuhiko)
13:20– 13:40N114NiFe Plating Film for Magnetic Sensor and Magnetic Compass
NiFe
electroplating
magnetic sensor
SY-82926
13:40– 14:00N115Advanced analysis of electroplating on patterned wafers
Electroplating
Patterned wafer
Numerical analysis
SY-821
14:00– 14:20N116High speed Cu electrodeposition in φ12inch-wafer size electrodeposition apparatus
High speed Cu plating
electrodeposition
electrolytic plating apparatus
SY-82993
(14:40–15:20) (Chair: Orita Nobuaki)
14:40– 15:20N118[Invited lecture] The trend of Advance in Semiconductor package technology in IoT era
IoT
Semiconductor Package
3D
SY-82776
(15:20–16:40) (Chair: Takeno Yasuhiko)
15:20– 16:00N120[Invited lecture] Nano-Structure Controlled Very Low Resistivity Cu Wires By High Purity Plating
Nano-level Cu Wire
High Purity Electrolyte
Microstructure Analysis
SY-82679
16:00– 16:40N122[Invited lecture] Determination of reaction rate constants of copper electrodeposition on a rotating disk electrode and using for simulation of the cuprous concentration inside TSVs
Copper electrodeposition
TSV filling
cuprous
SY-82585
Hall O(Bldg.4/5 2F 5-201)
SY-56 Symposium of Division of Thermal Engineering : Oral Session for Thermal Engineering
(10:40–11:20) (Chair: Tanaka Manabu)
10:40– 11:00O106Reaction-Heat Transfer Simulation on CaSO4 Chemical Heat Storage
Chemical Heat Pump
Calcium Sulphate
Simulation
SY-5614
11:00– 11:20O107Control for nano-particle size by two-stage microwave irradiation
microwave
nano-particle
DLS
SY-5633
(11:20–12:00) (Chair: Asakuma Yusuke)
11:20– 12:00O108[Review lecture] Microwave assisted extraction of Sudachitin from Sudachi peels and its effects on health
sudachitin
microwave
lipid metabolism
SY-5610
(13:00–13:40) (Chair: Asakuma Yusuke)
13:00– 13:40O113[Review lecture] The drying of the farm products by the microwave - For the development of Foods with Function Claims! -
Microwave decompression drying
Farm products
Functional foods
SY-5632
(13:40–14:40) (Chair: Sugioka Ken-ichi)
13:40– 14:00O115Mist droplet behavior during mist chemical vapor deposition
Mist droplet
Leidenfrost effect
Mist chemical vapor deposition
SY-56644
14:00– 14:20O116Effect of unsteady thermal and solutal Marangoni number on flow patterns in a liquid bridge
Marangoni convection
Floating zone technique
Si/Ge
SY-56266
14:20– 14:40O117Performance of Air-Conditioner Electric Vehicle (AI-EV)
Air-Conditioner
Electric Vehicle
Coefficient of Performance
SY-56652
(15:00–16:00) (Chair: Minakuchi Hisashi)
15:00– 15:20O119Effect of Ambient Pressure on Temperature Fluctuation of Multi-Phase AC Arc
Thermal Plasma
Multi-Phase AC Arc
Temperature Fluctuation
SY-56459
15:20– 15:40O120Measurement of thermal conductivity of molten Cu-Co alloy using an electromagnetic levitator superimposed with a static magnetic field
Thermal conductivity
Electromagnetic levitator
Molten Cu-Co alloy
SY-56379
15:40– 16:00O121Numerical investigation of transport phenomena in a growth furnace of SiC crystal by TSSG method
SiC
Momentum, heat and mass transfer
Electro-magnetic field
SY-56405
(16:00–17:00) (Chair: Hidema Ruri)
16:00– 16:20O122Study on heat transfer enhancement of packed bed maintaining its original gas permeability
(Kyushu U.) *(Stu)Yoshida K., (Ful)Nakaso K., (Ful)Fukai J.
heat transfer
packed bed
gas permeability
SY-56826
16:20– 16:40O123Acceleration of heat release rate by scraping solidified layer in latent heat storage bath
Latent heat storage
Acceleration
Scraping
SY-56203
16:40– 17:00O124Promoting Effect of Steam on PM Combustion in Continuous Regeneration Type PM Removal Device Using Fluidized Bed
PM
Fluidized Bed
Steam
SY-56528
Hall P(Bldg.4/5 3F 4-301)
SY-85 Symposium of Division of Materials and Interface (3) Practical Challenges and Current Trends in Crystallization Technology
(9:00–10:20) (Chair: Takiyama Hiroshi)
9:00– 9:20P101The effect of plant extracts addition on crystallization of biodiesel oil
biodiesel
crystallization
SY-85491
9:20– 9:40P102Investigation of ZMH deposition mechanism against SUS304
ZMH
Deposition
Particle size
SY-85661
9:40– 10:00P103Effects of minimizing CO2 bubbles on synthesis of CaMg(CO3)2 from concentrated brine
Fine-bubbles
Reactive crystallization
Concentrated brine
SY-85873
10:00– 10:20P104Bioremediation of leachate from landfill layer by immobilization of Ca2+ in the form of calcium carbonate
bioremediation
landfill leachate
calcium carbonate
SY-85236
(10:40–12:00) (Chair: Igarashi Koichi)
10:40– 11:00P106In situ observation of crystal growth in levitated single droplet
Electrodynamic balance
Crystallization
Levitated droplet
SY-85164
11:00– 11:20P107Purity Evaluation of Obtained Crystalline Particles as Spherical Agglomerate by Using Liquid-liquid Phase Separation
Crystallization
Purity
Spherical agglomerate
SY-85762
11:20– 11:40P108Molecular Dynamics Simulation of mutual anti-solvent crystallization
mutual anti-solvent crystallization
molecular dynamics
local compositions
SY-8545
11:40– 12:00P109Continuous Flow Production of Crystalline Particles by using Anti-Solvent addition and Reactive Crystallization
Crystallization
Continuous Flow Production
Anti-Solvent
SY-85638
(13:00–14:40) (Chair: Maeda Kouji)
13:00– 13:20P113Effect of Crystallization Condition on Scale formation in Suspension Melt Crystallization
Melt crystallization
Scale formation
Heat transfer
SY-85721
13:20– 13:40P114Influences of Additives on Melting Behaviors of m-Chloronitrobenzene Crystals
melting behaviors
additives
m-chloronitrobenzene
SY-85906
13:40– 14:00P115control of vapor diffusion protein crystallization with phyllo-silicate
crystallization
protein
phyllo-silicate
SY-85739
14:00– 14:20P116Control of lysozyme crystallization by using dynamic interfaces of liposomal membrane
Lysozyme
Liposome
Crystallization
SY-85961
14:20– 14:40P117The effects of application time of internal direct current on protein nucleation
protein
crystallization
direct current
SY-85756
(15:00–16:20) (Chair: Funakoshi Kunio)
15:00– 15:20P119Quality Control of Crystalline Particles Grown at the Template Interface as the Crystallization Field
Crystallization
Templated crystallization
Crystal quality
SY-85720
15:20– 15:40P120The effect of the cooling rate and flow condition of cooling water on crystal size distribution on batch cooling crystallization of glycine
batch cooling crystallization
crystal size distribution
heat transfer
SY-85485
15:40– 16:00P121Effect of purification of mother liquor by MF on MSZW
Metastable Zone Width
Microfiltration
Cooling crystallization
SY-85616
16:00– 16:20P122Polymorphic control of L-isoleucine by ultrasonic irradiation
crystallization
amino acid
ultrasonic
SY-85755
Hall Q(Bldg.4/5 3F 4-302)
SY-52 Symposium of Fluid & Particle Processing Division (1) Bubbles, Drops, and Particles Dispersion Engineering 2016
(9:00–10:20) (Chair: Iwata Shuichi, Hidema Ruri)
9:00– 9:20Q101Sterilization of E. coli by Aerating Ozone Microbubbles
ozone
microbubble
sterilization
SY-52957
9:20– 9:40Q102Effects of bubble surface fluctuation and trace impurity on terminal rise velocity of single bubble
Single bubble velocity
Bubble surface fluctuation
Trace impurity
SY-52108
9:40– 10:00Q103Effect of surfactant on air bubble size during and after microwave irradiation
Microwave
bubble
DLS
SY-5289
10:00– 10:20Q104The effect of pH of solution on the motion of a bubble rising in a hydrophobically modified alkali-soluble emulsion polymer solution
Bubble rise motion
Viscoelastic fluid,
Rheological property
SY-52580
(10:40–11:40) (Chair: Ando Keita, Bando Yoshiyuki)
10:40– 11:00Q106Estimation Method for Bubble Diameter Distribution in a Stirred Tank by Application of Distribution Function
stirred tank
bubble breakup
bubble diameter
SY-52955
11:00– 11:20Q107Bubbly flow patterns in a perforated pipe at high pressure
flow loop
bubble size distribution
multiphase flow
SY-52150
11:20– 11:40Q108Suppression of Heat Transfer by Fine Bubbles Attached to the Wall
bubble
heat transfer
SY-52960
(13:00–13:40) (Chair: Sakai Mikio)
13:00– 13:40Q113[Review lecture] Fluid/particle technologies for next-generation carbonaceous resource conversion
Gasification
Reactor Configuration
Rearrangement of parallel/consecutive reactions
SY-52569
(13:40–14:40) (Chair: Homma Shunji, Sakai Mikio)
13:40– 14:00Q115Bubble behavior in a bubbling fluidized bed with an increase in volume of fluidizing gas
(Kagoshima U.) *(Stu·PCEF)Miyata H., (Ful)Kai T., (Ful)Nakazato T.
Fluidized bed
Bubble size
Gas volume change
SY-52642
14:00– 14:20Q116Preparation of microcapsule using a spray atomization method
microcapsule
spray atomization
size control
SY-52945
14:20– 14:40Q117Particle separation through a thermo-responsive micro pillar array
Deterministic Lateral Displacement
Tunable separation
thermo-responsive hydrogel
SY-52815
(15:00–16:20) (Chair: Fujioka Satoko, Iwata Shuichi)
15:00– 15:20Q119Effect of fine particles on mass transfer as a Taylor flow gas absorber
slug flow
gas-liquid interface
fineparticles
SY-52501
15:20– 15:40Q120Aggregation and coalescing rate of particles in the liquid for different mixing operations
Aggregation
particles
mixing
SY-52464
15:40– 16:00Q121Experimental and numerical study on slurry rheology evaluation and bulk observation
rheology
slurry
DEM
SY-52294
16:00– 16:20Q122A study on particle concentration under electric field using micro X-ray CT
electrophoresis
particle concentration process
fine particle
SY-52414
Hall R(Bldg.4/5 3F 4-303)
SY-86 Symposium of Division of Materials and Interface (4) Current Trends in Development of Functional Particles for Various Applications
(13:00–13:40) (Chair: Sakono Masafumi)
13:00– 13:40R113[Invited lecture] Development of Novel Functional Materials based on N-Heteroacene Derivatives
Self-Organization
N-Heteroacene
Functional Materials
SY-86296
(13:40–14:40) (Chair: Kimura Isao)
13:40– 14:00R115Relationship of Layered Zinc Hydroxide Structure and the pH Buffering Function
pH buffering
hydroxide
layered
SY-86761
14:00– 14:20R116Effect of structural change of super concentrated nanofluid on viscosity behavior
nanofluid
nanoparticle
viscosity
SY-86363
14:20– 14:40R117Supercritical synthesis of vanadium dioxide and performance evaluation
vanadium dioxide
nanoparticle
smart window
SY-86364
(15:00–16:00) (Chair: Toorisaka Eiichi)
15:00– 15:20R119Design of nanogel matrix to improve activity and lifetime of Pd nanoparticle catalyst
nanogel
cross-link density
palladium
SY-86235
15:20– 15:40R120One-pot formation of raspberry-shaped polysiloxane particles by ultrasonication
sonication
raspberry-type aggregation
polysiloxane particles
SY-86455
15:40– 16:00R121Metal nanoparticle production technology development using the gaseous phase evaporating method
nanoparticle
SY-86504
(16:00–17:00) (Chair: Hoshino Yu)
16:00– 16:20R122Some consideration on the formation mechanism of inorganic microspheres in a W/O/W dispersion
calcium phosphate
multiple dispersion
microsphere
SY-86406
16:20– 16:40R123Development of low dielectric inorganic hollow particles using emulsion interface
Hollow particle
Interfacial reaction
Low dielectric material
SY-86995
16:40– 17:00R124Basic study on laser sealing techniques of the V2O5-ZnO-BaO-TeO2 lead-free glass powder
Lead-free glass powder
laser sealing
sealing properties
SY-86610
Hall S(Bldg.4/5 3F 4-304)
HQ-22 Network of Women Chemical Engineers
(12:00–13:00) (Chair: Tsuji Yoshiko)
12:00– 12:10Opening Remark
(U. Tokyo) Tsuji Yoshiko
12:10– 12:30S111Expatriates as a woman engineer
Life work balance
Woman
HQ-22547
12:30– 12:50S112Lifework Balance in Europe
Woman
Lifework balance
Carrier path
HQ-221008
12:50– 13:00Discussion
Hall T(Bldg.4/5 3F 5-302/303)
SY-83 Symposium of Division of Materials and Interface (1) Latest Advances in Functional Materials and Interfacial Phenomena (Oral Session)
(9:00–10:40) (Chair: Inasawa Susumu)
9:00– 9:40T101[Invited lecture] Laser-gold nanoparticle interaction: Fundamental aspect of plasmonic heating and its application.
laser
gold
plasmon
SY-83181
9:40– 10:00T103Microwave assisted cocatalyst deposition onto various metal (oxy)nitride photocatalysts
microwave
cocatalyst
metal (oxy)nitride
SY-839
10:00– 10:20T104Microwave-assisted synthesis of nitrogen-doped hollow carbon spheres
hollow carbon
supercapacitors
pseudocapacitance
SY-83621
10:20– 10:40T105Elucidation of the zeolite synthesis process from the aluminosilicate by microwave heating
zeolite
microwave
crystallization
SY-83234
(10:40–12:00) (Chair: Tatsumi Rei)
10:40– 11:00T106Surface functionalization of a solid polymeric material using dip-coating with surface segregation of surfactants
polymer surface
surface functionalization
dip-coating
SY-8353
11:00– 11:20T107Thinnig of striped metal nanoparticle layers using surfactants; the effects of wettability of substrates
Metal nanoparticle
Surfactant
Inkjet
SY-83248
11:20– 11:40T108Fabrication of aligned silver nanowire conductive films by wet coating
silver nanowire ink
transparent conductive film
wet coating
SY-83962
11:40– 12:00T109Effects of polymer adsorption on shear stress instability in nanoparticle suspensions
co-solvent
oscillation
suspension
SY-83557
(13:00–14:00) (Chair: Okada Yohei)
13:00– 13:20T113Numerical simulation for the effect of the spatial scale on Marangoni effect
Marangoni effect
CFD
interfacial phenomena
SY-83444
13:20– 13:40T114Direct numerical simulation of structure formation in drying bimodal colloidal suspensions
(U. Tokyo) *(Ful)Tatsumi R., (PIA) (Ful)Koike O., (U. Tokyo) (Ful)Tsuji Y., (PIA) (Ful)Yamaguchi Y.
direct numerical simulation
drying colloidal films
capillary interactions
SY-83425
13:40– 14:00T115Fabrication of HKUST-1 thin film by spray-coating method
Metal-organic framework
Porous materials
Evaporation induced self assembly
SY-83261
(14:00–15:00) (Chair: Ishii Haruyuki)
14:00– 14:20T116Spray-drying synthesis and crystallization of amorphous zinc/imidazole complexes
zeolitic imidazolate frameworks
spray-drying method
crystallization
SY-83292
14:20– 14:40T117Direct numerical simulation of breakup of rod-like nano-particle aggregates under simple shear
(PIA) *(Ful)Koike O., (U. Tokyo) (Ful)Tatsumi R., (PIA) (Ful)Yamaguchi Y.
simple shear flow
breakup of aggregates
direct numerical simulation
SY-83871
14:40– 15:00T118Dispersion control of TiO2 nanoparticles by phosphonic acid ligand
dispersion
Fine particles
ligand
SY-83844
(15:00–16:00) (Chair: Koike Osamu)
15:00– 15:20T119Surface modification of BaTiO3 nanoparticles to enhance permittivity of transparent nanocomposite films
(Tohoku U.) *(Stu·PCEF)Kanamori T., (Ful)Ishii H., (Ful)Konno M., (Ful)Nagao D.
nanocomposite
transparence
permittivity
SY-83512
15:20– 15:40T120Statistical analysis on the fracture process of highly porous ceramics
porous ceramics
fracture behavior
SY-83994
15:40– 16:00T121Synthesis and evaluation of core-shell type Fe16N2 nanoparticles
Fe16N2
core-shell
sintering
SY-83624
(16:00–17:00) (Chair: Ogi Takashi)
16:00– 16:20T122Effect of molecular structure of carboxylic acids on the magnetic nanoparticles dispersibility
(TUAT) *(Stu)Koike N., (Ful)Okada Y., (Ful)Kamiya H.
Magnetic nanoparticles
Carboxylic acid
Dispersibility
SY-83840
16:20– 16:40T123Structure control of gold nanoparticle-assembled mesoporous silica nanospheres
(Tohoku U.) *(Stu·PCEF)Ishikawa Y., (Ful)Ishii H., (Ful)Konno M., (Ful)Nagao D.
Gold nanoparticle
Mesoporous silica nanosphere
Nanoparticle assembly
SY-83550
16:40– 17:00T124Structural Control of MEA for High Performance and Durability in Solid-state Alkaline Fuel Cells
Solid-state Alkaline Fuel Cells
Membrane Electrode Assembly
Ionomer
SY-83649
Hall U(Bldg.4/5 3F 5-301)
SY-88 Symposium of Division of Environment
(13:00–14:00) (Chair: Nakai Satoshi)
13:00– 13:20U113Online monitoring of selenium in desulfurization wastewater with automated measuring equipment
online selenium monitor
desulfurization wastewater
coal-fired power plant
SY-88301
13:20– 13:40U114Analysis of nitrogen-sulfur compounds in flue gas desulfurization wastewater
wastewater
chemical oxygen demand
thermal power plant
SY-88252
13:40– 14:00U115Evaluation of acid soil amelioration with desulfurization waste and waste concrete in China
acid soil
desulfurization waste
waste concrete
SY-88581
(14:00–14:40) (Chair: Sakai Yuji)
14:00– 14:20U116Synthesis of fluorescent material from scallop shell powder by calcination in carbon dioxide atmosphere
Scallop shell
Calcination
Fluorescence
SY-88420
14:20– 14:40U117Analysis of thermal degradation behavior of chlorinated resin containing metal oxide
flame retardant
Mo oxide
cellulose
SY-88735
(15:00–16:20) (Chair: Takahashi Nobuhide)
15:00– 15:20U119High-Pressure Regenerative CO2 Chemical Solvent - Low-Temperature Desorption Process
CO2 Chemical Solvent
High-Pressure
Low-Temperature Desorption
SY-88450
15:20– 15:40U120Fixation of CO2 through mineral carbonation with concrete sludge
carbon dioxide
concrete sludge
calcium carbonate
SY-88458
15:40– 16:00U121Modeling of CO2 capture and separation system applying phase separation process incorporated with precipitation and heat of reaction by Aspen Plus
CO2 capture
slurry
solid-liquid separation
SY-88555
16:00– 16:20U122Validity of measurement of heat of CO2 dissociation in stripper for CO2 capture system
carbon dioxide capture system
dissociation heat
heat loss
SY-88568
Hall V(Bldg.4/5 4F 4-401)
SY-69 Symposium of Division of Systems, Information and Simulation Technologies (2) Information Integration and Modelling Approaches
(10:20–11:20) (Chair: Hirao Masahiko)
10:20– 10:40V105Improved performance of software iCOSMOS for calculating steady-state sensitivities
Biochemical systems theory
Steady-state sensitivity
S-system method
SY-69442
10:40– 11:00V106business process modeling approach of plant lifecycle engineering from plant alarm system management view
plant alarm system
plant lifecycle
business process model
SY-69614
11:00– 11:20V107Development of a software to control correctly the management of change
Sustainable Engineering
Management Of Change
SY-6958
(11:20–12:00) (Chair: Matsumoto Hideyuki)
11:20– 12:00V108[Review lecture] IoT and chemical industry
Internet of Things
Big Data
Process Systems Engineering
SY-6937
(13:00–14:00) (Chair: Nakagawa Hiroshi)
13:00– 13:20V113Risk evaluation models for the design of parenterals manufacturing processes
pharmaceutical manufacturing
risk evaluation
single-use technology
SY-69197
13:20– 13:40V114Wavelength selection method for process analytical technology with infrared spectra
Calibration-minimum approach
Infrared spectroscopy
Process analytical technology
SY-69647
13:40– 14:00V115Process Optimization and Design Space Construction by Process System Analysis
global system analysis
Quality by Design
equation-oriented process modelling
SY-69677
(14:00–15:20) (Chair: Takeda Kazuhiro)
14:00– 14:40V116[Review lecture] Study on applying dynamic simulation in development of unified system for hydrogen energy carrier production and utilization
Hydrogen
Renewable Energy
Dynamic Simulation
SY-6938
14:40– 15:00V118Life Cycle GHG Emission Associated with FAEE Produced from Ion-exchange Resin Catalyzed Process using Hydrous Ethanol
Life Cycle GHG Emission
FAEE
Hydrous Ethanol
SY-69818
15:00– 15:20V119Design ofing a chemical process considering for local deployment in local regions: A case study of FAME production from waste cooking oil with Ion-exchange resin catalysts
Centralized and decentralized chemical processes
Route design by GIS
Dynamic vehicle load
SY-69862
(15:20–16:20) (Chair: Bito Kiyotaka)
15:20– 15:40V120Integration of distributed information in designing local energy system
Simulation
Data acquisition
Information modeling
SY-69593
15:40– 16:00V121A role of modeling for intensification of plant-derived-resources utilization system considering integrated design of agriculture and industry
Biomass
Modeling
Agriculture
SY-69692
16:00– 16:20V122Activity model of life cycle design of packaging
food packaging
activity model
environmentally-conscious design
SY-69125
(16:20–17:00) (Chair: Sugiyama Hirokazu)
16:20– 17:00V123[Review lecture] Integration engineering for the realization of sustainable society
Sustainable society
Trans-disciplinarily
Integration engineering
SY-6964
Hall W(Bldg.4/5 4F 4-402)
SY-68 Symposium of Division of Systems, Information and Simulation Technologies (1) Topics on Plant Operation and Process Safety
(13:00–13:40) (Chair: Baba Kazuyoshi)
13:00– 13:40W113[Invited lecture] Consideration of Safety Management in Japan
Process Safety
Personal Safety
Safety Management
SY-68250
(13:40–14:40) (Chair: Kawanabe Takeshi, Hashimoto Yoshihiro)
13:40– 14:00W115Results of the Survey on the Consciousness of Plant Operators
Plant Operation
Survey
Safety consciousness
SY-68220
14:00– 14:20W116[Requested talk] Reinforcement of safe and stable operation by alarm management
safe plant operation
abnormal situation management
operational excellence
SY-68217
14:20– 14:40W117[Requested talk] Prediction of abnormality by trend monitoring system
Safety
Prediction
Notice
SY-68858
(14:40–15:20) (Chair: Yoshida Hideaki)
14:40– 15:00W118[Requested talk] Emergency response training of Utility-plant
Emergency
Training
Utility
SY-68218
15:00– 15:20W119[Requested talk] Development of Operation Training Simulators (OTS) for Education and Training of Plant Operating Personnel
Plant operation
OTS
Simulation
SY-68358
Hall X(Bldg.4/5 4F 4-404)
SY-53 Symposium of Fluid & Particle Processing Division (2) Development of Powder Processing
(9:00–10:20) (Chair: Kimata Mitsumasa, Ishihara Shingo)
9:00– 9:20X101Characterization of Organic Powders Using a Newly Developed Shear Tester
Shear Test
Organic Powder
Constant Normal Load
SY-53302
9:20– 9:40X102Effect of Vibration Frequency on Vibration Convection of Fine Powder
Vibration Convection
Vibration Frequency
Fine Powder
SY-53343
9:40– 10:00X103Charging of dielectric particles between electrodes and particle levitation
Dielectric Particle
Charging
Levitation
SY-53340
10:00– 10:20X104Simple methods for predicting the grinding rate constant distributions of coals
grinding rate constant distribution
HGI
coal blend
SY-53933
(10:20–12:00) (Chair: Matsusaka Shuji, Shimosaka Atsuko)
10:20– 10:40X105ADEM simulation of electrical disintegration for physical separation technology
Electrical disintegration
ADEM
simulation
SY-53216
10:40– 11:00X106Mixing granulation process to improve formability of metal particles
metal particles
mixing
granulation
SY-53185
11:00– 11:20X107Effect of particle shape on mixing behavior by using DEM simulation
DEM simulation
Mixing behavior
particle shape
SY-5385
11:20– 11:40X108DEM simulation of wet fine particle using liquid bridge model
DEM
Wet Condition
Fine Particle
SY-53244
11:40– 12:00X109Powder Discharge Simulation by DEM
DEM simulation
Powder discharge
Hopper
SY-53367
(13:00–14:40) (Chair: Taniguchi Izumi, Nakazato Tsutomu)
13:00– 13:20X113[The JCEJ Outstanding Paper Award] Effect of Aperture Structure of Dutch Weave Mesh on Flow Resistivity
Dutch Weave Mesh
Lattice Boltzmann Method
Pressure Drop
SY-5384
13:20– 13:40X114Classifying characteristics of coarse particles by collecting box improved cyclone
cyclone
Classification of large particles
Improved collection box
SY-53657
13:40– 14:00X115Evaluation of Dispersion State of CaCO3 Filler particles in a resin Using Microscopy
Sealant
Filler particles
Mechanical properties
SY-53843
14:00– 14:20X116The permittivity estimation for particle dispersed composite materials
permittivity
particle size distribution
composite material
SY-53318
14:20– 14:40X117Polymer Coating to the Alumina Particles by the Mechanochemical Polymerization Using a Planetary Mill
Mechanochemical polymerization
Planetary mill
Alumina particle
SY-53390
(14:40–16:20) (Chair: Tokoro Chiharu, Fukasawa Tomonori)
14:40– 15:00X118Powderization of egg white solution by rapid drying of droplets without a spray
egg white
rapid drying
droplet feeding
SY-53934
15:00– 15:20X119Synthesis of sulfur/carbon/porous nanostructured V2O5 composite cathode for lithium sulfur batteries
Cathode
Composite electrode
Lithium sulfur batteries
SY-53842
15:20– 15:40X120Synthesis of Li2FeP2O7/carbon composite cathode for lithium batteries
Li2FeP2O7
Cathode
Lithium battery
SY-53853
15:40– 16:00X121Synthesis of MnV2O6 by spray pyrolysis
MnV2O6
Anode
Lithium battery
SY-53857
16:00– 16:20X122Synthesis of porous N-doped carbon particles by spray pyrolysis method
N-doped
porous
spray pyrolysis
SY-53631
Hall Y(Bldg.4/5 4F 5-401)
SY-55 Symposium of Fluid & Particle Processing Division (4) Cutting Edge Technologies for Transport Phenomena and Fluid Engineering 2016
(9:20–10:20) (Chair: Matsukuma Yosuke)
9:20– 9:40Y102Effect of slip characteristic of hydrogel painting on turbulent drag reduction
Hydrogel
Drag reduction
Numerical simulation
SY-55488
9:40– 10:00Y103Turbulent drag reduction of hydrogel painting with surface roughness
Hydrogel
Surface roughness
Numerical simulation
SY-55498
10:00– 10:20Y104Creation of functional silica materials by controlling sol-gel transition
Silica
Sol-gel transition
Thermal Conductivity
SY-55943
(10:40–11:40) (Chair: Saeki Takashi)
10:40– 11:00Y106Analysis of polymer configuration in melt spinning process by using multi-scale simulation
Multi-scale simulation
Polymeric liquid
Slip-link model
SY-55759
11:00– 11:20Y107Heat transfer characteristics of Taylor-Couette flow with shear-thinning fluids
Taylor-Couette flow
Shear-thinning fluid
Heat transfer
SY-55780
11:20– 11:40Y108Extensional viscosity of polymer solutions calculated by pressure drops in abrupt contraction flows
extensional viscosity
polymer solution
abrupt contraction flow
SY-55822
(13:00–14:00) (Chair: Taniguchi Takashi)
13:00– 13:20Y113Flow and Diffusion Characteristics of a Micro-Droplet Reaction Field
micro-droplet
reaction
flow and diffusion characteristics
SY-55738
13:20– 13:40Y114Sedimentation Stability of Magneto Rheological Fluids
Magneto Rheological Fluid
Stability
Slurry
SY-55954
13:40– 14:00Y115LES-based CFD Simulations of Fluid Pressure Fluctuations for Identifying the Characteristic Frequencies of Flow-Induced Noise
(JGC) *(Cor)Hu X. D., (Ful)Qian S. X., (Cor)Kataoka S., (Cor)Kanamaru S.
LES
flow-induced noise
resonance
SY-55546
(14:00–15:00) (Chair: Maekawa Munenori)
14:00– 14:20Y116Development and thermal performance evaluation of laminate vapor chamber
Vapor chamber
Thermal performance evaluation
Thermal resistance
SY-55938
14:20– 14:40Y117Mass transfer of gas-liquid interface generated by submerged jet
Mass transfer
Gas absorption
Submerged jet
SY-55881
14:40– 15:00Y118Simulation of molten slag flow in slag hole of IGCC
IGCC
LBM
slag
SY-55659

Technical program
Technical sessions
Session programs
Search in technical program
SCEJ 48th Autumn Meeting (Tokushima, 2016)

© 2016 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact Organizing Committee, SCEJ 48th Autumn Meeting (Tokushima, 2016)
E-mail: inquiry-48fwww3.scej.org