Last modified: 2016-09-07 09:49:00
CVD and other dry processes are core technology in the industry producing electronics devices, solar cells, MEMS, and functional coatings. The motivation of this symposium is to discuss the logical optimization and design for controlling the microstructure and functions of thin films and fine particles produced by CVD or other dry processes based on the theoretical understanding of reaction mechanisms. Young Researcher Award will be given to distinguished young speakers chosen at the session.
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall M, Day 1 | |||||
(10:40–12:00) (Chair: | |||||
M106 | [Invited lecture] Development of the uniform and high-quality thin film fabrication technique on large-area substrate under atmospheric-pressure with using mist | mist CVD Leidenfrost effect metal oxide functional thin film | ST-17 | 601 | |
M107 | Preparation of perovskite solar cell by spray-deposition process | perovskite solar cell TiO2 spray-deposition | ST-17 | 641 | |
M108 | High speed deposition of aggregated film of silicon nano-particle using plasma jet CVD | CVD plasma nanoparticle | ST-17 | 533 | |
M109 | [The JCEJ Outstanding Paper Award] Effects of annealing on the morphology and porosity of porous TiO2 films fabricated by deposition of aerosol nanoparticles | Phase transformation Plasma-enhanced CVD Sintering | ST-17 | 263 | |
(13:00–14:00) (Chair: | |||||
M113 | [Invited lecture] Development of ALD-Based Gas Barrier Films with Ultralow Moisture Permeation for Complicated Structures | atomic layer despoition gas barrier film water vapor transmission rate | ST-17 | 412 | |
M114 | Effect of underlayer materials on initial film growth of SiC-CVI | CVD SiC methyltrichlorosilane | ST-17 | 718 | |
M115 | Effect of HCl gas addition to SiC-CVI process aiming for uniform infiltration | SiC CVI | ST-17 | 972 | |
(14:00–15:00) (Chair: | |||||
M116 | Synthesis of thin films incorporating high aspect ratio particles by a PECVD method using gas and solid raw materials | Nanocomposite film Carbon nanotube Abnormal growth | ST-17 | 264 | |
M117 | Reaction mechanism of supercritical fluid deposition for Bi4Ti3O12 | supercritical fluid deposition reaction mechanism Bi4Ti3O12 | ST-17 | 924 | |
M118 | Ultra-porous carbon electrode fabricated from supercritical drying and application for lithium-air battery | porous carbon electrode supercritical drying lithium-air battery | ST-17 | 678 | |
Hall M, Day 2 | |||||
(9:00–10:00) (Chair: | |||||
M201 | Study of preparing cubic boron nitride films by thermal CVD | CVD boron nitride coating | ST-17 | 626 | |
M202 | Deposition and evaluation of TiC hard coating on chemically treated WC-Co substrate | adhesion strength TiC hard coating Cemented carbide | ST-17 | 634 | |
M203 | Control of underlayer selectivity during supercritical fluid deposition of Cu by exploiting fluid-phase reactions | Supercritical fluid deposition Cu underlayer selectivity | ST-17 | 769 | |
(10:00–11:00) (Chair: | |||||
M204 | Evaluation of ferroelectric capacitor with Al-doped ZnO electrode by sputtering | ferroelectric capacitor Al-doped ZnO sputtering | ST-17 | 903 | |
M205 | Rapid deposition of epitaxial Cu film on repeatedly used sapphire for precisely controlled CVD synthesis of graphene | graphene chemical vapor deposition epitaxial growth | ST-17 | 429 | |
M206 | Optimization of hot-wire-assisted ALD process aiming for highly-pure and -oriented Co film fabrication | Hot-wire-assisted ALD Cobalt | ST-17 | 1002 | |
(11:00–12:00) (Chair: | |||||
M207 | Synthesis of carbon nanotube through a diesel engine using normal dodecane/ethanol mixing fuel | carbon nanotube diesel engine flame synthesis | ST-17 | 20 | |
M208 | Diffusion of carbon into metal substrates in carbon CVD from C5--C7 hydrocarbons | CVD Carbon Solid-phase diffusion | ST-17 | 303 | |
M209 | [Invited lecture] In silico synthesis of molecular sieve carbons for controlling gas separation characteristics | CVD Molecular simulation Air separation | ST-17 | 395 | |
(13:00–14:00) (Chair: | |||||
M213 | [Review lecture] Current Status and Issues of Li-ion Batteries, Characteristics Required for Positive Electrode Materials | Li-ion Large format battery Positive Electrode Materials | ST-17 | 176 | |
M215 | Rapid vapor deposition of Si-Cu/carbon nanotube/Cu hybrid films for lithium secondary battery anodes | lithium secondary battery physical vapor deposition carbon nanotube | ST-17 | 912 | |
(14:00–15:20) (Chair: | |||||
M216 | Effect of heat treatments on the photocatalytic activity of Ag-TiO2 nanocomposite films prepared by a one-step gas-phase deposition process | PECVD Annealing Crystal-phase | ST-17 | 267 | |
M217 | Construction of the overall reaction model for optimizing SiC-CVD using Methyltrichlorosilane (3) | SiC Methyltrichlorosilane Modelization | ST-17 | 868 | |
M218 | [Review lecture] in-situ observations on III-V semiconductor quantum dots and its growth mechanism | MBE STM in-situ | ST-17 | 35 |
Technical program
Technical sessions
Session programs
Search in technical program
SCEJ 48th Autumn Meeting (Tokushima, 2016)