Affillations field begins with “Yokohama City U.”, “U. Tokyo”; 51 programs are found. (“Poster with Flash” presentations are double-counted.)
The search results are sorted by the start time.
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Day 1 | T101 | Decision support method for the choice between batch and flow syntheses in drug substance manufacturing | Drug substance manufacturing Batch and flow syntheses Leaching | SY-66 | 484 |
Day 1 | N101 | [Review lecture] Current Status and Future Perspective of Simulation for Free Surface Flow and Multi-phase Flow using Particle Methods | MPS Free Surface Flow Multi-phase Flow | SY-53 | 208 |
Day 1 | F103 | Preparation of injectable hydrogel based on Dextran-g-PDMAEMA- g-Serotonin for hemostasis | Hydrogel Hemostatic Dextran | SY-78 | 491 |
Day 1 | L103 | Technology assessment for renewable energy sources considering environmental and technoeconomic aspects: A case study of battery-assisted hydrogen production | Electrolysis System design LCA(Life cycle assessment) | ST-23 | 536 |
Day 1 | J104 | Study on practical application of hydrogen production equipment using thermal decomposition of methane | Thermal decomposition Carbon deposition Hydrogen | SY-56 | 430 |
Day 1 | L104 | Providing dispatchable power using variable renewable energy with thermal energy storage: Life cycle assessment of wind powered thermal energy system in paper mills all over Japan | Greenhouse gas emission Dispatchable power source Paper production | ST-23 | 622 |
Day 1 | N104 | Validation of the density scaling technique in the DEM-CFD method | DEM-CFD method Density scaling technique gas-solid flow | SY-53 | 151 |
Day 1 | T107 | Application of DEM-CFD simulation to rotary powder die-filling | Discrete Element Method Computational Fluid Dynamics Die Filling | SY-66 | 226 |
Day 1 | D109 | Numerical analysis of fracture and mixing process of fine particle aggregate under simple shear flow | shear flow fracture and mixing fine particle aggregate | SY-82 | 739 |
Day 1 | C113 | [Requested talk] Systems med&pharma: as a new section in SIS division and a new field | Process systems engineering Design Healthcare | SP-2 | 464 |
Day 1 | U113 | [Invited lecture] Kinetic trans-omics for insulin-stimulated adipocytes | kinetic trans-omics insulin adipocyte | SY-72 | 229 |
Day 1 | C115 | [Requested talk] Development of nanoparticles for diagnosis by considering living bodies as a system | Nanoparticles Diagnostics Therapeutics | SP-2 | 465 |
Day 1 | V116 | [Invited lecture] Key Aspects of thermal power plants under high penetration of variable renewable | renewable energy thermal power plant flexibility | SY-75 | 106 |
Day 1 | X117 | Effect of supercritical CO2 drying condition on properties of porous carbon nanofiber electrode and Li-O2 battery performance. | Supercritical CO2 drying Carbon nanofiber electrode Li-O2 battery | SY-74 | 273 |
Day 1 | C117 | [Invited lecture] Life or money? Life and money? Cost and effectiveness of drugs | Cost-effectiveness Drugs Pharmacoeconomics | SP-2 | 467 |
Day 1 | X120 | Kinetic analysis of solid base catalyzed reaction in supercritical methanol using transesterification as a model reaction | Supercritical methanol Solid base catalysts Kinetic analysis | SY-74 | 743 |
Day 1 | PB131 | Hydrogen Permeation Measurements of Proton-Conducting Lanthanum-Based Oxide Composite Electrolyte Membranes | Solid oxide fuel cells Mixed proton-electron conductor Hydrogen permeable membranes | ST-24 | 569 |
Day 1 | F125 | Effect of ultrasound on hydrothermal synthesis of ZSM-5 zeolite | zeolites crystallization ultrasonic | SY-78 | 276 |
Day 1 | F126 | Control of Physical Property and Structure in CuInS2 Films Prepared by Ultrasonic Spray Method with Double Sources | CuInS2 ultrasonic spray method solar cells | SY-78 | 147 |
Day 2 | PA203 | Fabrication of MAPbI3 thin films for perovskite solar cells using mist chemical vapor deposition | perovskite solar cell spin coating mist chemical vapor deposition | SY-79 | 136 |
Day 2 | PA226 | Development of zeolite adsorbents for removal of N2O | zeolite adsorption N2O | SY-79 | 656 |
Day 2 | T205 | Holistic design of biopharmaceutical production processes considering single-use technology and continuous manufacturing | pharmaceutical manufacturing single-use technology continuous manufacturing | SY-67 | 222 |
Day 2 | PA257 | Numerical Simulation of Structure Formation of Nanoparticles in a Liquid Phase during Drying | numerical simulation nanoparticle dispersion drying process | SY-79 | 375 |
Day 2 | PA266 | Rapid Synthesis of Hydrothermally Stable ZSM-5 in the Presence of 1-butanol | 1-butanol ZSM-5 zeolite | SY-79 | 722 |
Day 2 | I206 | Carbon Insertion in Propylene Formation from Hydrocarbon Pool of HZSM-5 Catalyzed MTO Reaction Studied by Isotopic Transient Kinetic Analysis | Methanol-to-Olefins (MTO) Propylene Steady-state Isotopic Transient Kinetic Analysis (SSITKA) | SY-63 | 581 |
Day 2 | N209 | Direct numerical simulation on many-particle system in magnetorheological fluid under shear flow | Magnetorheological fluid Shear flow Apparent viscosity | SY-53 | 800 |
Day 2 | W209 | Life cycle assessment of a recycling process applying advanced electrical pulse fragmentation: A case study on photovoltaic panels and Lithium-ion batteries | Life Cycle Assessment Recycling Environment | SY-84 | 285 |
Day 2 | I213 | Methane conversion to C1/C2 oxygenates over zeolite supported Rh catalyst with the help of CO | methane partial oxidation zeolite Rh catalyst | SY-63 | 345 |
Day 2 | D214 | Design and assessment of production process of cellulose nanofiber-reinforced plastic as an emerging technology | Life cycle assessment Process simulation Biomass | HQ-12 | 582 |
Day 2 | K214 | Effect of SiCl4 addition for SiC-CVD from MTS/H2 | CVD SiC Recycle | ST-22 | 556 |
Day 2 | K215 | Manufacture of SiCf/SiC by chlorine-free Chemical Vapor Infiltration | SiC chemical vapor infiltration tetramethylsilane | ST-22 | 822 |
Day 2 | T216 | Analysis of the effects of process parameters on start-up operation in continuous wet granulation | Pharmaceuticals continuous manufacturing process assessment | SY-67 | 239 |
Day 2 | W216 | The relationship between persistent effect of seaweed bed restoration by iron fertilizer and coastal environment in the northeast of Tsushima Islands | Seaweed bed restoration Coastal environment Iron | SY-84 | 479 |
Day 2 | PB272 | Investigation of the optimum structure of photo sensitizer-carrying nanoparticle assembly for photodynamic therapy | Drug delivery system Photodynamic therapy Nanoparticles | SY-69 | 751 |
Day 2 | F217 | Structure of dried colloidal films controlled by the morphology of aggregated particles | Colloidal suspensions Drying Numerical simulation | SY-78 | 169 |
Day 2 | K217 | Kinetic analysis of TiAlN-CVD process for construction of reaction model (2) | CVD TiAlN cutting tool | ST-22 | 153 |
Day 2 | T217 | Data-driven failure detection and root-cause analysis in changeover processes in biopharmaceutical drug product manufacturing | Classification Big data | SY-67 | 521 |
Day 2 | X218 | Hydrothermal synthesis of CeO2 nanoparticles using dual-stage flow method for control of size and distribution | Hydrothermal synthesis cerium oxide dual-stage flow reactor | SY-74 | 287 |
Day 2 | K219 | Fabrication of SiO2 and Al2O3 insulator film by mist chemical vapor deposition | insulator thin-film-transistor mist chemical vapor deposition | ST-22 | 135 |
Day 3 | L301 | Effect of bilayer electrolyte on performance of protonic ceramic fuel cells with BaZr0.8Y0.2O3-δ and BaZr0.1Ce0.7Y0.1Yb0.1O3-δ electrolytes | Solid oxide fuel cell Bilayer electrolyte Proton conduction | ST-23 | 450 |
Day 3 | M301 | Characterization of shear-thinning hydrogels for delivery through endoscope tubes | hydrogels shear-thinning pressure-drop | SY-55 | 302 |
Day 3 | L302 | Direct carbon dioxide methanation in a calcium looping process using Ni-CaO-Y doped BaZrO3 | CCU Ca looping Methanation | ST-23 | 756 |
Day 3 | I304 | Partial oxidation of methane over perovskite-type LaM0.95Rh0.05O3 (M : Cr, Co, Fe) catalysts | Partial oxidation Perovskite oxide Regeneration | SY-63 | 470 |
Day 3 | U304 | Single-nucleus RNA sequencing of multinucleated hepatocytes to elucidate the contribution to liver function. | Single-nucleus RNA sequencing binucleated cell hepatocyte | SY-73 | 34 |
Day 3 | W304 | Design method for injectable manufacturing processes considering continuous and batch modes | Pharmaceutical manufacturing Decision making Process modeling | SY-71 | 767 |
Day 3 | X307 | Application of hot compressed water for recovery of valuable materials from microalgae extraction residue | Hot compressed water Microalgae Extraction residue | SY-74 | 620 |
Day 3 | K306 | Reaction mechanism analysis of polycrystalline SiC-CVD for high-speed, uniform growth process design | Reaction model SiC CVD | ST-22 | 499 |
Day 3 | K307 | Time-evolution of film thickness profiles by level set method during CVD multiscale simulation | multiscale simulation chemical vapor deposition level set method | ST-22 | 504 |
Day 3 | U307 | Simulation-based optimization of temperature profiles in slow freezing of hiPS cells | Regenerative medicine Cryopreservation Multiobjective process optimization | SY-73 | 463 |
Day 3 | K315 | Theoretical study for modeling surface reactions on SiC-CVI process | CH3SiCl3 SiC CVI surface reaction | ST-22 | 665 |
Day 3 | K316 | Construction of surface reaction mechanism of SiC-CVI based on theoretical study | SiC-CVI Surface reaction mechanism CH3SiCl3 | ST-22 | 682 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 51st Autumn Meeting (2020)