Japanese page RELOAD
SCEJ

SCEJ 51st Autumn Meeting (2020)

Last modified: 2023-05-16 19:47:30

Hall and day program : Day 1

All sessions can be attended from the On-line (Virtual) Meeting Site.
Preprints(Abstracts) are now open. Click the Paper IDs. (Registered participants and invited persons only)
The ID/PW was sent on Sept. 10 (for earlybird registered participants) or on Sept. 23 (for on-site registered participants).
(Aug. 8) Flash session of SY-69 has been cancelled.
(Aug. 24,27) Schedule of SY-74 (X306, X307) and HQ-11 (D301) has been changed.

Day 1(Sep. 24)

Hall B | Hall C | Hall D | Hall E | Hall F | Hall G | Hall H | Hall I | Hall J | Hall K | Hall L | Hall M | Hall N | Hall P | Hall P | Hall R | Hall S | Hall T | Hall U | Hall V | Hall W | Hall X | Hall Y
SY-77 | SP-1 | SP-2 | SY-82 | SY-80 | SY-78 | SY-81 | SY-83 | SY-64 | SY-63 | SY-56 | SY-76 | ST-23 | SY-52 | SY-53 | ST-24 | SY-58 | SY-60 | SY-61 | SY-62 | SY-66 | SY-59 | SY-72 | SY-75 | SY-84 | SY-74 | SY-51

TimePaper
ID		Title / AuthorsKeywordsTopic codeAck.
number
Hall B()
SY-77 [Symposium of Division of Electronics]
Electronic Materials Technology and Process Engineering
(9:00–10:20) (Chair: Habuka Hitoshi)
9:00– 9:20B101Electrodeposition of bismuth thin film as negative electrode for Mg secondary battery
Mg secondary ion battery
bismuth
electrodeposition
SY-77888
9:20– 9:40B102Discharge-Charge Characteristics of Aluminum-Sulfur Secondary Batteries using Sulfur Electrode with Multi-Walled Carbon Nanotubes
Alminum Secondary Battery
Sulfur Electrode
Multi-Walled Carbon Nanotubes
SY-77817
9:40– 10:00B103Aluminum Electrodeposition Using hydrophobic TFSA-Based Room-Temperature Ionic Liquids
electrochemical deposition
room-temperature ionic liquid
aluminum
SY-77836
10:00– 10:20B104Electrochemical Characteristics of Lithium-Ion Batteries Using a Negative Electrode with Graphene Oxide Nanoribbons
Lithium-Ion Batteries
Graphene Oxide Nanoribbons
Negative Electrode
SY-77821
10:20– 10:40Break
(10:40–12:00) (Chair: Saito Takeyasu)
10:40– 11:00B106Effects of Air-Electrode prepared by Multi-Walled Carbon Nanotubes on Discharge-Charge Characteristics of Lithium-Air Batteries.
lithium-air battery
multi-walled carbonnanotubes
air electrode
SY-77824
11:00– 11:20B107SiC etching rate and profile adjusted by ClF3 gas
SiC
ClF3
Etching
SY-7763
11:20– 12:00B108[Invited lecture] Development of MID using molecular bonding technology

SY-77871
(13:00–13:20) (Chair: Saito Takeyasu)
13:00– 13:20B113[Invited lecture] Introduction of Micro LED Display Manufacturing Total Solution

SY-77876
SP-1 [Special Symposium]
Materials and Processes for Advancing Future Electronics and JISSO Technologies
(13:20–14:40) (Chair: Ui Koichi)
13:20– 14:00B114[Invited lecture] The innovative manufacturing for the future in Tohoku area (tentative)
JISSO
Tohoku
SP-1865
14:00– 14:40B116[Invited lecture] Development of composite material by molecular bonding technology and its surface interface analysis
JISSO
Tohoku
SP-1866
14:40– 15:00Break
(15:00–15:40) (Chair: Habuka Hitoshi)
15:00– 15:40B119[Invited lecture] Flexible Hybrid Electronics: Fundamentals and Potential Applications
JISSO
Tohoku
Smart electronics
SP-1867
(15:40–17:00) (Chair: Saito Takeyasu)
15:40– 16:20B121[Invited lecture] Molecular bonding technology that supports next-generation electronics
JISSO
Tokohu
SP-1868
16:20– 17:00B123[Invited lecture] Development of room-temperature atomic layer deposition and application to ion exchange adsorption membrane
JISSO
Tohoku
Deposition
SP-1870
Hall C()
SP-2 [Special Symposium]
Systems Perspective on Med & Pharma
(13:00–13:40) (Chair: Ohta Seiichi, Taguchi Tomomasa)
13:00– 13:40C113[Requested talk] Systems med&pharma: as a new section in SIS division and a new field
Process systems engineering
Design
Healthcare
SP-2464
(13:40–14:20) (Chair: Sugiyama Hirokazu, Taguchi Tomomasa)
13:40– 14:20C115[Requested talk] Development of nanoparticles for diagnosis by considering living bodies as a system
Nanoparticles
Diagnostics
Therapeutics
SP-2465
(14:20–15:00) (Chair: Ohta Seiichi, Yamada Akira)
14:20– 15:00C117[Invited lecture] Life or money? Life and money? Cost and effectiveness of drugs
Cost-effectiveness
Drugs
Pharmacoeconomics
SP-2467
(15:00–15:40) (Chair: Yahagi Naohisa, Yamada Akira)
15:00– 15:40C119[Invited lecture] "Logistics" of drugs as a social system realized from patients perspectives
Logistics
Supply chain
Industry
SP-2468
(15:40–16:20) (Chair: Sugiyama Hirokazu, Kim Sanghong)
15:40– 16:20C121[Requested talk] Redefining healthcare system by technologizing medical processes
Healthcare
Medicine
Technology
SP-2466
(16:20–17:00) (Chair: Sugiyama Hirokazu, Ohta Seiichi)
16:20– 17:00General discussion
Hall D()
SY-82 [Symposium of Division of Materials and Interfaces]
New Technologies and Applications based on Various Dispersion System
(11:00–12:00) (Chair: Taguchi Yoshinari)
11:00– 11:20D107Investigation of proper surface properties of magnetic particles for efficient mixing of liquid droplet
(Kagoshima U.) *(Stu·PCEF)Hisadome T., (Reg)Yoshida M., (Reg)Takei T.
microliter droplets
efficient mixing
surface property
SY-82145
11:20– 11:40D108Development of a spontaneous emulsification technique using porous polymer particles
Spontaneous emulsification
Porous polymer particles
Drug delivery system
SY-82892
11:40– 12:00D109Numerical analysis of fracture and mixing process of fine particle aggregate under simple shear flow
(PIA) *(Reg)Koike O., (U. Tokyo) (Reg)Tatsumi R., (PIA) (Reg)Yamaguchi Y.
shear flow
fracture and mixing
fine particle aggregate
SY-82739
(13:00–14:00) (Chair: Toorisaka Eiichi)
13:00– 13:20D113Investigation of the effect of edible oil on the formation of lecithin organogel
Lecithin organogel
Rheology
Edible oil
SY-82183
13:20– 13:40D114Preparation of gel emulsions using low-molecular-weight gelators
gel emulsion
low-molecular-weight gelator
SY-82517
13:40– 14:00D115In vivo delivery of functional molecules by nanogel emulsion
nanogel emulsion
drug delivery system
SY-82515
(14:00–14:40) (Chair: Shono Atsushi)
14:00– 14:20D116Development of O/W/O type multi-cellular carrier using κ-carrageenan composite alginate gel particles
Alginate
k-carrageenan
Controlled release
SY-82654
14:20– 14:40D117Evaluation of storage stability and cellulose degradability of microcapsule containing thatch-degrading microorganism, Bacillus pumilus
microencapsulation
thatch-degradation
microorganism
SY-82146
14:40– 15:00Break
(15:00–16:20) (Chair: Ono Fumiyasu)
15:00– 15:40D119[Invited lecture] Motion of water-dispersed supramolecular structure exhibiting photoinduced morphological change
supramolecular structure
photoisomerization
nanofiber
SY-8276
15:40– 16:00D121Correlation between nonionic surfactant and particle size control of melamine-formaldehyde microcapsules by one-step preparation method
microcapsule
One-step
self-healing
SY-82502
16:00– 16:20D122Aβ42 aggregation inhibitory effect by enteric capsule containing rosmarinic acid
encapsulation
enteric capsule
AB42
SY-82546
Hall E()
SY-80 [Symposium of Division of Materials and Interfaces]
New Approaches for Designing Innovative Materials
(13:15–17:00) (Chair: Takami Seiichi, Endo Akira)
13:15– 13:20Opening remark
(Nagoya U.) (Reg)Takami Seiichi
13:20– 14:00E114[Invited lecture] Catalyst Informatics Approach for the Prediction of Catalytic Reaction Yields
Catalyst Informatics
Machine Learning
Catalyst Informatics
SY-8081
14:00– 14:40E116[Invited lecture] Smart flow process for accelerating functional materials development
smart flow process
accelerating materials development
nanoparticles
SY-8082
14:40– 15:00E118Behavior of polycyclic aromatic hydrocarbon adsorbed in interlayer space of layered clay mineral
Molecular dynamics
Layered clay mineral
Adsorption
SY-80402
15:00– 15:20E119Evaluation of organic-modified Al2O3/organic solvent interface affinity based on the work of adhesion by molecular dynamics simulation
nanoparticles
molecular dynamics simulation
work of adhesion
SY-80522
15:20– 15:40E120Analysis of sluggish gate adsorption behavior on metal-organic framework under external force
(Kyoto U.) *(Stu·PCEF)Arima Homare, (Reg·PCEF)Hiraide Shotaro, (Reg)Miyahara Minoru
Metal-organic framework
Gate adsorption
External force
SY-80446
15:40– 16:20E121[Invited lecture] Higher-order structure design of polymeric materials by cooperation of coarse-grained simulation and machine learning
block copolymer
phase separation
elastic property
SY-8088
16:20– 16:40E123[Requested talk] Discrete surface theory and its applications to material sciences
Carbon network
Graph theory
Discrete surface
SY-80528
16:40– 17:00E124Synthesis of ceramic nanocomposite films as a minimal surface
minimal surface
nanocomposite film
ceramic nanoparticle
SY-80532
Hall F()
SY-78 [Symposium of Division of Materials and Interfaces]
Cutting-edge research about Material Synthesis and Interface Phenomena (Oral Session)
(9:00–10:00) (Chair: Takei Takayuki)
9:00– 9:20F101Evaluation of physical properties of liposomes for detection of toxic substance
Liposome
Toxic molecule
Artificial cell
SY-78551
9:20– 9:40F102Chitosan gel preparation for DDS by pH switching with CO2
ion-complex
chitosan
DDS
SY-78353
9:40– 10:00F103Preparation of injectable hydrogel based on Dextran-g-PDMAEMA- g-Serotonin for hemostasis
Hydrogel
Hemostatic
Dextran
SY-78491
(10:00–11:00) (Chair: Yoshida Kazunari)
10:00– 10:20F104Formation of biomolecular-adsorbing interface using natural and synthetic polyphenol glycoside.
Polyphenolic glycosides
Glycointerface
biosensing
SY-78571
10:20– 10:40F105Macroporous silica-supported cellulose nanofiber for the adsorption of lysozyme : Kinetics, isotherm, thermodynamics, and mechanism
macropore size
CNF
adsorption
SY-78761
10:40– 11:00F106Hollowing and Carbonization of Polymer Particles
Carbon hollow particle
Polymer hollow particle
SY-789
(11:00–12:00) (Chair: Yamamoto Tetsuya)
11:00– 11:20F107Enzyme-embedded nanocapsule synthesized with trehalose assembly as protecting agent
enzyme
nanocapsule
sugar
SY-78842
11:20– 11:40F108Effect of adding nano-fillers on the crystallization behavior of polypropylene under the high supercooling condition
Polypropylene
Nano-filler
Fast scanning calorimetry
SY-78640
11:40– 12:00F109Activities of division of materials and interfaces
Division of materials and interfaces
SY-78900
(12:40–13:00) (Chair: Matsune Hideki)
12:40– 13:00F112Fabrication of hydrophobically-modified gelatin powder for liquid marble formation
Hydrophobicity
gelatin
liquid marble
SY-78825
(13:00–13:40) (Chair: Takei Takayuki)
13:00– 13:40F113[Invited lecture] Material processing in supercritical carbon dioxide phase and interface
material processing
supercritical CO2
phase and interface
SY-7878
(13:40–14:20) (Chair: Doki Norihito)
13:40– 14:20F115[Invited lecture] Developmet of recycle carbon fiber reinforced resin
Recycle Carbon fiber
Recycle Carbon fiber reinforced resin
Molecular bonding technology
SY-78379
(14:20–15:40) (Chair: Hara Nobuo)
14:20– 14:40F117Effect of particle size of silica particles contained in emulsion paint on the film formation process
Speckle pattern
Emulsion paint
Thickness decrease
SY-78883
14:40– 15:00F118Preparation of hybrid-type metallic nanoparticles with novel functon.
Nanoparticles
Hybrid materials
SY-78893
15:00– 15:20F119Effect of Alkylamine for Stepwise Thermal Decomposition of Iron Oxalate toward Size-Tunable Synthesis of Colloidal Fe3O4 Nanoparticles
Iron oxalate
Colloidal nanoparticle
Solvent-free
SY-78636
15:20– 15:40F120Synthesis and performance evaluation of dye-doped silica nanoparticles for trace detection
Silica nanoparticles
sol gel synthetic method
Fluorescent property
SY-78597
(15:40–16:40) (Chair: Kubo Masaru)
15:40– 16:00F121Controllable Synthesis of Hexagonal Hollow Silica Plate Particles and their Low Refractive Index in Polymer Nanocomposite Films
Hollow silica plate
Sol-gel method
Refractive index
SY-78764
16:00– 16:20F122Dynamic colloidal crystals consisting of hollow particles incorporating a movable core
(Tohoku U.) *(Stu·PCEF)Namigata H., (Reg)Watanabe K., (Reg)Suga K., (Reg)Nagao D.
particle assembly
optical property
photonic crystal
SY-78214
16:20– 16:40F123Morphology Control of ZIF-7-III using water-in-oil microemulsion
MOF
ZIF-7-III
microemulsion
SY-78291
(16:40–17:40) (Chair: Ohashi Hidenori)
16:40– 17:00F124Fabrication of HKUST-1 thin films on porous substrates by spray synthesis method
HKUST-1
spray syntheis
nanofiltration
SY-78600
17:00– 17:20F125Effect of ultrasound on hydrothermal synthesis of ZSM-5 zeolite
zeolites
crystallization
ultrasonic
SY-78276
17:20– 17:40F126Control of Physical Property and Structure in CuInS2 Films Prepared by Ultrasonic Spray Method with Double Sources
CuInS2
ultrasonic spray method
solar cells
SY-78147
Hall G()
SY-81 [Symposium of Division of Materials and Interfaces]
Novel Development in Crystallization Phenomena and Operations
(9:00–10:00) (Chair: Funakoshi Kunio)
9:00– 9:20G101Crystal growth behaviors and morphology of L-phenylalanine
phenylalanine
crystal growth
morphology
SY-81647
9:20– 10:00G102[Review lecture] Development of crystallization operation design for production of high quality crystalline particles
crystallization
operation design
quality control
SY-81524
(10:00–10:40) (Chair: Hirasawa Izumi)
10:00– 10:20G104Effect of press-speed on super-pressure of unsaturated fatty acids in high-pressure crystallization
High pressure
Crystallization
Super-pressure
SY-8146
10:20– 10:40G105Development of Highly Soluble Solid by Solid Dispersion Melt Crystallization Method
Melt crystallization
Dissolution rate
Eutectic
SY-81716
(10:40–11:20) (Chair: Kudo Shoji)
10:40– 11:00G106Reslurry Operation and Particle Design by Crystallization to Improve Purity of Crystalline Agglomerates
Crystalline agglomerates
Crystallization
Reslurry
SY-81750
11:00– 11:20G107Investigation of operation strategy for crystallization and solid-liquid separation to produce cucurbit[7]uril hydrate crystals.
Cucurbit[7] uril
Crystallization
Solid-liquid separation
SY-81859
(11:20–12:00) (Chair: Doki Norihito)
11:20– 12:00G108[Review lecture] Surface melting of ice crystals visualized by advanced optical microscopy
surface melting
ice crystal
optical microscopy
SY-81256
(13:00–14:00) (Chair: Maeda Kouji)
13:00– 13:20G113Purification of m-Chloronitrobenzene / m-Fluoronitrobenzene Agglomerates using Dry Sweating
Purification
Agglomerates
Dry sweating
SY-81303
13:20– 13:40G114Crystal growth promotion in L-glutamic acid cooling crystallization using an oscillatory baffled reactor
Crystallization
Process Intensification
Oscillatory baffled reactor
SY-81344
13:40– 14:00G115Strategy focusing on the concept from precipitation to reaction crystallization
Precipitation
reaction crystallization
Crystal quality
SY-8179
(14:00–15:00) (Chair: Mikami Takashi)
14:00– 14:20G116Effect of phase state of lipid membrane on the diffusivity of lysozyme over its nucleation
lysozyme
nucleation
diffusivity
SY-81862
14:20– 14:40G117Homogeneity Evaluation of Co-crystal Particles by Solution Crystallization Method
Crystallization
Cocrystal
Homogeneity
SY-81724
14:40– 15:00G118Increase in Probability of Nucleation of L-Arginine Hydrochloride by Ultrasonication
Amino Acid
Polymorphism
Ultrasound
SY-81505
(15:00–15:40) (Chair: Doki Norihito)
15:00– 15:40G119[Invited lecture] Inclusion of biomolecules into voids in giant protein-associated hemocyanin crystals
hemocyanin
protein
crystal
SY-81357
(15:40–16:40) (Chair: Hino Tomomichi)
15:40– 16:00G121Zeolite nano-particles synthesis using flow-type microwave reactor
microwave
zeolite
flow proess
SY-81223
16:00– 16:20G122Examination of lanthanum crystal recovery method using oxalic acid
Lanthanum
Reaction crystallization
Recovery
SY-81225
16:20– 16:40G123A consideration on solvate of carbamazepine-saccharin cocrystal
cocrystal
solvate
polymorphs
SY-81516
(16:40–17:40) (Chair: Amari Shuntaro)
16:40– 17:00G124Numerical simulation for the effect of stochastic nucleation on the product quality in seeded batch crystallization
Seeding
Simulation
Stochastic process
SY-8180
17:00– 17:20G125Influence of Operation Factors on Tapping Nucleation
Nucleation
Supercooled Melt
Solid Collision
SY-81550
17:20– 17:40G126Effects of microwave power on yield and crystallinity of synthesis of LTA zeolite
zeolite
microwave
crystallinity
SY-81186
Hall H()
SY-83 [Symposium of Division of Materials and Interfaces]
Current Research in Soft Matter Engineering
(13:00–14:40) (Chair: Ichikawa Shuji, Watanabe Takaichi)
13:00– 13:40H113[Invited lecture] Development and inkjet application of titanium dioxide suspension utilized reversible control method for particle dispersion and flocculation
(Shiseido) (Reg·SPCE)Nasu Akio
reversible control for particle dispersion
soft cohesive suspension
inkjet
SY-83211
13:40– 14:00H115Controlled drug release from a pH responsive hydrogel loaded with a photo acid generator
drug delivery system
pH responsive hydrogel
photo acid generator
SY-83283
14:00– 14:20H116On-demand Defoaming Behavior of Pickering Foams Stabilized by PNIPAM Nanogels
copolymer nanogel
Pickering foam
on-demand defoaming
SY-83691
14:20– 14:40H117Systematic separation and recovery of metal ions using ionic polymer gel
hydrogel
metal ion
systematic separation
SY-83325
14:40– 15:00Break
(15:00–16:20) (Chair: Yamauchi Noriko, Watanabe Satoshi)
15:00– 15:40H119[Invited lecture] Functional design of glyco-biomaterials using chemo-enzymatic processes
Carbohydrate chemistry
Chemoenzymatic synthesis
Molecular recognition
SY-83113
15:40– 16:00H121Recycling of heavy metal-containing construction sludge using ionic polymer gel
polymer gel
heavy metal
sludge treatment
SY-83329
16:00– 16:20H122Formation of poly(ionic liquid)s layer on a resin surface by photopolymerization
Ionic liquid
Surface modification
Polymer brush
SY-83650
(16:20–17:40) (Chair: Taguchi Shogo, Morisada Shintaro)
16:20– 16:40H123Aqueous formation of the Ni particle-containing sugar-immobilized PMMA particles
sugar-immobilized polymer particle
Ni particle
aqueous formation
SY-83488
16:40– 17:00H124Effect of shape anisotropy of photocatalyst composite particles on motions and photocatalytic properties
Self-propelled motion
photocatalyst
anisotoropy
SY-83190
17:00– 17:20H125Control of Intenal Structure in Microspheres via Polymerization-Induced Phase Separation
microspheres
Polymerization-induced phase separation
SY-83639
17:20– 17:40H126Estimation of swelling agent effect on pore size distribution of mesoporous silica particles
Mesoporous silica particles
Micelle template
Hansen solubility parameter
SY-83196
Hall I()
SY-64 [Symposium of Division of Chemical Reaction Engineering]
Poster Session with Flash Presentation
(9:00–10:30) (Chair: Kobayashi Daisuke, Takahashi Atsushi)
9:00– 10:30PA101Facile synthesis of NiO-CuO/CP electrocatalysts with 3D architecture for Hydrogen Evolution Reaction
Electrocatalyst
Water splitting
Hydrogen Evolution Reaction
SY-64122
PA102Quantitative analysis of transferable hydrogen formed by growth of aromatic cluster during coal pyrolysis
coal pyrolysis
transferable hydrogen
quantitative analysis
SY-64628
PA103Examination of ammonia produced in P/L reaction of activated nitrogen generated by dielectric barrier discharge
ammonia
DBD
SY-64675
PA104Production of pyro-hydrochar from marine biomass, Undaria pinnatifida and its application as solid acid catalyst
Carbonaceous material
Marine biomass
Solid acid catalyst
SY-64324
PA105Preparation of Bamboo-Structured Cellulose and Its Application to Noble Composite Materials
organosolv treatment
cellulose composite
bamboo
SY-64349
PA106Establishment of InP quantum dot semiconductor synthesis method using micro flow reactor
Quantum dot
Micro flow reactor
SY-64150
PA107Simulation of a CVD reactor with detailed reaction mechanism and OpenFOAM
CVD
Simulation
OpenFOAM
SY-64717
PA108CH4 dry reforming process with capturing solid carbon from CO2: intensification of carbon capturing rate
Methane dry reforming
Carbon capture
Structured catalyst
SY-64575
PA109Catalytic cracking of 3-ring and 4-ring polycyclic aromatic hydrocarbons with hydrogen transfer reaction
polycyclic aromatic hydrocarbons
catalytic cracking
hydrogen transfer
SY-64816
PA110Promotion effect of Ho doping on OMS-2 catalysts for toluene combustion at low temperatures
Volatile organic compounds
Toluene oxidation
Ho-OMS-2 catalysts
SY-6415
PA111Development of numerical solver for methanation reactor considering flow and reaction and heat transfer
methanation
simulation
OpenFOAM
SY-64425
PA112Degradation behavior of Pt-based catalysts by impurity sulfur component for CO2 reforming of methane
CO2 reforming of methane
Sulfur poisoning
Catalyst degradation
SY-64599
PA113Methane reforming using composite nanocatalyst
chemical loop
methane reforming
metal supported
SY-64342
PA114Effect of F doping on the In-based catalysts for the promoting of electrochemical reduction of CO2 to formic acid
CO2 reduction
electrocatalysts
In-based catalysts
SY-64127
PA115Role of supported noble metal catalysts for reduction of selenate in aqueous solution
Selenate Reduction
wastewater treatment
supported noble metal catalysts
SY-64340
PA121Evaluation of hydrogen production rate in the electrolysis of water with hydrogen-permeable Pd-Ag membrane
Electrolysis of water
Hydrogen
Palladium membrane
SY-64204
PA122Preparation of 2-chloropropane via catalytic hydrogenation
2-chloropropene
2-chloroprpane
Pd
SY-6410
PA123Catalytic conversion of chitin to useful chemicals
Chitin
Catalytic conversion
Chemicals
SY-64819
PA124In-situ catalytic upgrading of bio-oil over metal-doped hierarchical HZSM-5 catalyst
Bio-oil
hierarchical HZSM-5
Catalytic upgrading
SY-64121
PA125Separation and recovery of phosphorous from dephosphorization slag using acid-alkali treatment
dephosphorization slag
phosphorous
recovery
SY-6411
PA126Steam reforming of toluene over plate-type Ni/Al2O3 structured catalyst : Effect of co-feeding oxygen
Structured catalyst
Autothermal steam reforming
Toluene
SY-64215
PA127Catalyst development for dry reforming of methane using Pd membrane reactor
membrane reactor
oxygen storage capacity
catalyst
SY-64293
PA128Effect of catalyst matrix on catalytic cracking of lipids
catalytic cracking
deoxygenation
triglyceride
SY-64763
PA129Selective isomerization of C6 hydrocarbons by core-shell structured MFI-type zeolite
Isomerization
Zeolite
Core-shell structure
SY-64598
PA130Synthesis of MnOx dominated catalysts with cubic structure and its application in the catalytic combustion of volatile organic compounds
volatile organic compounds
Catalytic combustion
MnOx/Co-Fe/NF catalysts
SY-64126
PA131Kinetic modeling of CO2 methanation and investigation of catalyst effectiveness factor
methanation
catalyst
kinetic model
SY-64689
PA132Detailed chemical kinetic modeling of CO2 methnation over Ni catalyst
methanation
kinetic
catalyst
SY-64740
PA133Development of Detailed Chemical Kinetic Model of Water Gas Shift Reaction over Several Solid Catalysts
catalyst
WGS
simulation
SY-64371
PA134Effect of Molar Ratio of Reductants of H2O and NH3 as well as Loading Amount of Cu on CO2 Reduction Performance over Cu/TiO2 Photocatalyst
Photocatalyst
CO2 Reduction Performance
Reductants Combination
SY-6443
PA135Role of supported noble metal catalysts for oxidation of arsenite in aqueous solution
Arsenite oxidation
wastewater treatment
supported noble metal catalysts
SY-64341
SY-63 [Symposium of Division of Chemical Reaction Engineering]
New Development of Reaction Engineering in the Field of Natural Resources, Energy, and Environment
(10:40–11:40) (Chair: Kouzu Masato, Fujitsuka Hiroyasu)
10:40– 11:00I106Novel synthesis method of alkyl glucoside from biomass decomposition products
alkyl glucoside
resin catalyst
levoglucosan
SY-63594
11:00– 11:20I107Catalytic reaction design controlled by reactants adsorption for gamma-valerolactone synthesis under conditions of low hydrogen ratio
catalytic hydrogenation
gamma-valerolactone
levulinic ester
SY-63284
11:20– 11:40I108Bifunctional carbon Ni/NiO nanofiber catalyst based on 5-sulfosalicylic acid for conversion of C5/C6 carbohydrates into ethyl levulinate
(Tohoku U.) *(Stu·PCEF)Abe Yuya, (Reg)Guo Haixin, (Reg)Smith Richard
Solvothermal
transition metal catalyst
ethyl levulinate
SY-63736
(11:40–12:00) (Chair: Tago Teruoki)
11:40– 12:00I109[The SCEJ Award for Outstanding Research Achievement] Reaction Process Engineering Research for Synthesis of Poorly Water-Soluble Esters
The SCEJ Award for Outstanding Research Achievement
SY-6325
(15:00–15:40) (Chair: Onoe Kaoru)
15:00– 15:40I119[Review lecture] Solvent-free organic synthesis involving solid reactants
solvent-free reaction
organic reaction
solid state
SY-63209
(15:40–16:20) (Chair: Kishida Masahiro)
15:40– 16:20I121[Review lecture] Process intensification (PI) of CO2 resourcing process developed by catalytic reaction engineering and auto-methanation technology operating at room temperature
CCU
Auto-methana
Carbon capture
SY-6348
Hall J()
SY-56 [Symposium of Division of Thermal Engineering]
(9:20–10:20) (Chair: Hirose Yuji)
9:20– 9:40J102The effect of pore structure change on gasification reactivity in co-gasification of biomass and coal
co-gasification
surface area
reaction temperature
SY-56561
9:40– 10:00J103Effect of microwave irradiation position on fluidized bed type microwave plasma assisted combustor
microwave plasma
fluidized Bed
plasma-assisted combustion
SY-56386
10:00– 10:20J104Study on practical application of hydrogen production equipment using thermal decomposition of methane
Thermal decomposition
Carbon deposition
Hydrogen
SY-56430
(10:20–11:20) (Chair: Asahara Makoto)
10:20– 10:40J105Methodology to evaluate the structure of porous membrane to manufacturing conditions
(Kyushu U.) *(Stu)Fujii K., (Reg)Hironaka S., (Reg)Inoue G., (Reg)Fukai J.
Wetting process
Porosity
Pore size distribution
SY-56839
10:40– 11:00J106Numerical Analysis on Heat Transfer Mechanism in Packed Bed with Deforming Particles
packed bed
particle deformation
heat transfer mechanism
SY-56765
11:00– 11:20J107Fluidity and heat retention of nanosilica shake gel
Shake Gel
Sol-Gel Transition
Heat Retention
SY-56729
(11:20–12:00) (Chair: Nogami Hiroshi)
11:20– 12:00J108[Requested talk] Active heat exchanger with high durability and performance by controlling precipitation
Scraped surface heat exchanger
Heat recovery from hot spring
Future outlook for heat exchanger
SY-56677
(13:00–14:00) (Chair: Kobayashi Nobusuke)
13:00– 13:40J113[Invited lecture] Vision of Heat Utilization
Renewable Energy
SY-56440
13:40– 14:00J115[The SCEJ Award for Outstanding Young Researcher] Development of Next-Generation Latent Heat Storage and Transportation Technology for High-Temperature Application
The SCEJ Award for Outstanding Young Researcher
SY-5626
(14:00–14:40) (Chair: Nomura Takahiro)
14:00– 14:20J116Development of adsorption thermal storage system utilizing low-temperature waste heat -demonstration test of offline heat transportation by tractor-trailer -
Adsorption heat storage
Waste heat
Offline heat transportation
SY-56579
14:20– 14:40J117Development of adsorption thermal storage system utilizing low-temperature waste heat - Inspection of thermal behavior of container type heat storage tank
Adsorption heat storage
Waste heat
Offline heat transportation
SY-56557
(15:00–16:00) (Chair: Marumo Kenji)
15:00– 15:20J119Renewable energy utilization system combined with electric vehicle and heat storage tank
Renewable energy
Electric vehicle
Heat storage tank
SY-5693
15:20– 15:40J120Development of hybrid heat storage material by CaO coating on Al-Si alloy based micro encapsulated phase change material
heat storage material
latent heat
chemical heat
SY-56609
15:40– 16:00J121Effect of Poor Solvent on Phase Change Characteristics of Ammonium Alum Slurry
PCM Slurry
Ammonium Alum
Poor Solvent
SY-56274
(16:00–17:00) (Chair: Hironaka Shuji)
16:00– 16:20J122Oxygen deficiency control of tungsten oxide by hydrogen reduction in a continuous screw reactor
Oxygen-deficient metal oxide
Tungsten trioxide
Hydrogen reduction
SY-56390
16:20– 16:40J123Surface modification of Micro-Encapsulated Phase Change Material for thermal control of CO2 methanation
Thermal Energy Storage
Methanation
Microencapsulation
SY-56380
16:40– 17:00J124Durability-Enhancement of Al-Cu-Si ternary system Micro-Encapsulated Phase Change Material with eutectic temperature of 500oC-level
Phase Change Material
Microencapsulation
Thermal Energy Storage
SY-56381
(17:00–17:40) (Chair: Hidema Ruri)
17:00– 17:20J125Relation between equilibrium pressure and temperature rise by metal hydrogen heat pump in cold environment
Metal Hydride
Recovery of cold energy
No emit CO2
SY-56698
17:20– 17:40J126Numerical simulation on the formation process of thin solid layer on a substrate with bank
Evaporation
Liquid film
Marangoni force
SY-56493
Hall K()
SY-76 [Symposium of Division of Safety]
The Subjects and Approaches to Process Safety Management
(13:00–14:40) (Chair: Takeda Kazuhiro, Shimada Yukiyasu)
13:00– 13:40K113[Invited lecture] Designing a New PSM (Process Safety Management) Framework
Process Safety Management
Risk Based Process Safety
Sub-Managements
SY-76143
13:40– 14:00K115[Requested talk] LOPA translation working group activities
LOPA
Process Safety Management
Process Hazard Analysis
SY-76231
14:00– 14:20K116[Requested talk] Utilization of Logic Tree Analysis Results to Learn from Experiences of Process Safety Incidents
Incident Investigation
Process Safety Incident
Logic Tree
SY-76519
14:20– 14:40K117[Requested talk] Development of Prediction Model for Environmental Condition of Deterioration Phenomena for Asset Integrity Management
Asset Integrity
Environmental Condition
Deterioration Phenomena
SY-76518
14:40– 15:00Break
(15:00–16:20) (Chair: Fuchino Tetsuo, Minamigawa Tadao)
15:00– 15:20K119[Requested talk] A study on requirements for implementation of smart engineering support system for management-of-change based on business process model
management of change
smart management
business process model
SY-7640
15:20– 15:40K120Simplified identification method of accident scenarios with fire and explosion in chemical risk assessment
Chemical risk assessment
Scenario identification
Fire and explosion prevention
SY-76441
15:40– 16:00K121Scenario diagram and viewpoint list for supporting consideration of accident scenarios related to unintended reactions
Unintended reactions
Consideration of accident scenarios
Fire and explosion prevention
SY-76228
16:00– 16:20K122Core Principles for creating, strengthening, and sustaining process safety culture
Process Safety
Safety Culture
Causal Loop
SY-7647
Hall L()
ST-23 [Trans-Division Symposium]
Cell, Energy Conversion and Storage Technology Supporting Next Generation Society (Oral Presentation Category)
(9:20–10:20) (Chair: Nakagaki Takao, Sakamoto Hiroki)
9:20– 9:40L102Energy Assessment on Supply Chain of Renewable Hydrogen
FIT Graduation
Photovoltaic
Water Electrolysis Hydrogen
ST-23192
9:40– 10:00L103Technology assessment for renewable energy sources considering environmental and technoeconomic aspects: A case study of battery-assisted hydrogen production
Electrolysis
System design
LCA(Life cycle assessment)
ST-23536
10:00– 10:20L104Providing dispatchable power using variable renewable energy with thermal energy storage: Life cycle assessment of wind powered thermal energy system in paper mills all over Japan
Greenhouse gas emission
Dispatchable power source
Paper production
ST-23622
10:20– 10:40Break
(10:40–12:00) (Chair: Koyama Michihisa, Oshiro Hitoshi)
10:40– 11:00L106Design of a distributed hydrogen energy storage system with solar cells considering waste heat utilization of fuel cells
energy system
fuel cell
hydrogen
ST-23818
11:00– 12:00L107[Invited lecture] Utilization of Residential Photovoltaic and Battery
Residential photovoltaic
After FIT
Battery for VPP
ST-23114
(13:00–14:20) (Chair: Nishimura Akira, Nakagaki Takao)
13:00– 14:00L113[Invited lecture] Development of PEM Water Electrolysis
Water Electrolysis
Hydrogen
Renewable Energy
ST-23115
14:00– 14:20L116A Study on Potential of Home energy systems for accelerating renewable energy deployment
Home Energy
Simulation
Energy Conservation
ST-2370
Hall M()
SY-52 [Symposium of Division of Fluid & Particle Processing]
Cutting Edge Technologies for Transport Phenomena and Fluid Engineering 2020
(9:20–10:00) (Chair: Masuda Hayato)
9:20– 9:40M102Two-dimensional polarization measurement around bubbles in the continuous flow channel under pressure oscillating field
continuous flow channel
two-dimensional polarization measurement
pressure oscillation
SY-52618
9:40– 10:00M103Relationship between OER performance and oxygen bubble generation in alkaline water electrolysis
Alkaline water Electrolysis
bubble growth rate
hydrogen
SY-52649
(10:00–11:00) (Chair: Homma Shunji)
10:00– 10:20M104The Bubble rise motion with Elongated Branching Shapes in a High Viscous Hydrophobically Modified Alkali-Soluble Emulsion Polymer Solution
Bubble rise motion
Viscoelastic fluid
Elongated branching shape
SY-52851
10:20– 10:40M105Experimental investigation on the velocity distribution of a jet in crossflow
ligament
breakup
LDV
SY-52361
10:40– 11:00M106Numerical simulation of a jet in crossflow considering non-Newtonian model
Volume of Fluid
liquid jet
crossflow
SY-52362
(11:00–12:00) (Chair: Misumi Ryuta)
11:00– 11:20M107Construction method of Level set function from VOF function
Level Set
VOF
surface tension
SY-52742
11:20– 11:40M108Numerical Simulation of Growth of Nucleate Boiling Bubbles with Coalescence
Nucleate Boiling
Bubble Growth
Coalescence
SY-52512
11:40– 12:00M109Numerical simulation of curtain coating
Coating
Numerical Simulation
SY-52482
(13:00–13:40) (Chair: Uchihashi Yusuke)
13:00– 13:20M113Predicting shear-thickening of dilute suspension in Boger fluids
suspension
rheology
viscoelastic
SY-52486
13:20– 13:40M114Mesoscopic simulation of solutions of Worm-like micelle
surfactant
micelle
DPD simulation
SY-52254
(13:40–14:40) (Chair: Kaide Aya)
13:40– 14:00M115Numerical simulation of flow with shear-thinning fluid between rotating conical cylinders
Conical Taylor vortex flow
Shear-thinning fluid
Numerical simulation
SY-52552
14:00– 14:20M116Modeling and numerical simulation of the behavior peculiar to high viscous fluid
high viscous fluid
particle method
numerical simulation
SY-52802
14:20– 14:40M117Dynamics of rigid/flexible fibers in Newtonian fluid under simple shear
fiber motion
shear flow
numerical simulation
SY-52259
(14:40–15:40) (Chair: Iwata Shuichi)
14:40– 15:00M118Drag force of polyethyleneglycol in a flow affected by polymer entanglement
drag force
polymer conformation
polymer entanglement
SY-52389
15:00– 15:20M119The Effect of Floating Particle Addition on Heat Transfer from Side Wall of Solid-Liquid Agitation Vessel
Solid-Liquid Mixing
Floating Particle
Heat Transfer
SY-5245
15:20– 15:40M120Drag reduction effect in the heat collecting pipe of the geothermal heat utilization system
Drag Reduction
Geothermal heat utilization system
Surfactant
SY-52431
(15:40–16:40) (Chair: Taniguchi Takashi)
15:40– 16:00M121Rheological measurements of MR fluids with stabilizers and development a method for evaluating their stability
Stabilizer
Stability
Oil separation
SY-52432
16:00– 16:20M122The effect of development length on the Metzener-Otto type average shear rate estimation formula for a static mixer
static mixer
non-Newtonian fluid
SY-52433
16:20– 16:40M123Estimation for microwave non-equilibrium heating by new dimensionless number-local boiling and surface modification of liquid-liquid interface-
Microwave
dimensionless number
boiling
SY-5249
(16:40–17:20) (Chair: Shoji Eita)
16:40– 17:00M124Effect of Channel Geometric Condition on Mixed Convection Heat Transfer from a Heated Wall in Horizontal Rectangular Channel
mixed convection
heat transfer
numerical simulation
SY-5242
17:00– 17:20M125Comparison between the Stefan-Maxwell Equation and Its Approximation Equation with Correction Velocity for diffusion in A Ternary System
Stefan-Maxwell Equation
Gas Diffusion
Correction Velocity
SY-52854
Hall N()
SY-53 [Symposium of Division of Fluid & Particle Processing]
Bubbles, Drops, and Particles Dispersion Engineering 2020
(9:00–10:20) (Chair: Sakai Mikio, Mori Takamasa)
9:00– 9:40N101[Review lecture] Current Status and Future Perspective of Simulation for Free Surface Flow and Multi-phase Flow using Particle Methods
MPS
Free Surface Flow
Multi-phase Flow
SY-53208
9:40– 10:00N103Lattice Boltzmann simulation of capillary forces between particles
(Okayama U.) *(Reg)Mino Y., (Reg)Nakaso K., (Reg)Gotoh K.
Capillary force
Lattice Boltzmann method
wetting
SY-53887
10:00– 10:20N104Validation of the density scaling technique in the DEM-CFD method
DEM-CFD method
Density scaling technique
gas-solid flow
SY-53151
10:20– 10:40Break
(10:40–12:00) (Chair: Ishigami Toru, Mino Yasushi)
10:40– 11:00N106Prediction of Gas Dissolution Rate in Gas-Liquid Stirred Tank by Using Empirical Correlation and CFD Calculation
Stirred Tank
Gas Dissolution
Bubble Size
SY-53162
11:00– 11:20N107Numerical simulations of droplet ejection from inkjet nozzle
inkjet nozzle
droplet formation
VOF
SY-53595
11:20– 11:40N108Numerical investigation for the effects of PM2.5 aggregate structure on granular bed filtration
PM
Adhesion
DEM
SY-53814
11:40– 12:00N109Numerical simulation of droplet impact on a wall considering contact angle model
Volume of fluid
Droplet impact
Contact angle
SY-53655
(13:00–14:20) (Chair: Yamada Masumi, Homma Shunji)
13:00– 13:40N113[Review lecture] Effects bubbles and surface modification with polymers on membrane functions of phospholipid vesicles
liposomes
gas-liquid flow
PEGylated lipids
SY-53184
13:40– 14:00N115Preparation of gel particles entrapped with carbonic anhydrase-liposome conjugates and their application to carbon dioxide absorption
calcium alginate
lipid vesicles
catalyst reuse
SY-53181
14:00– 14:20N116Removal of Fine Particles Adhered on Glass Plate by Collision of Ultrafine Bubble Water with Ultrasound
Ultrafine Bubble
Fine Bubble
Ultrasonic cleaning
SY-53513
14:20– 14:40Break
(14:40–15:40) (Chair: Fujioka Satoko, Ikeda Hideyuki)
14:40– 15:00N118Evaluation of particle separation behaviors in microfluidic devices incorporating porous materials
porous material
particle separation
microfluidic device
SY-53401
15:00– 15:20N119Effects of microstructure and wettability on droplet coalescence in fibrous filter
coalescence
droplet
numerical simulation
SY-5385
15:20– 15:40N120Improvement of initial particle collection efficiency of nanofiber media for air filter and life elongation of the media loaded with particles
nano-fiber media
collection efficiency
pressure drop
SY-53195
15:40– 16:00Break
(16:00–17:00) (Chair: Yoshimoto Makoto, Palaniswamy Chitra)
16:00– 16:20N122Effect of Adsorption Behavior of binders on Graphite Dispersion and Electrode Resistance
Adsortion
Dispersion
Graphite
SY-53317
16:20– 16:40N123High reproducibility measurement of particle size distribution of fine particles by autometed dispersion system
particle size
dispersion
measurement
SY-5339
16:40– 17:00N124Aggregation behavior of polystyrene particles in a highly viscous fluid in a stirred tank
Aggregation
Fine particles
OpenFOAM
SY-53710
Hall P()
(12:40–14:40)
12:40– 13:40PA101Facile synthesis of NiO-CuO/CP electrocatalysts with 3D architecture for Hydrogen Evolution Reaction
Electrocatalyst
Water splitting
Hydrogen Evolution Reaction
SY-64122
PA102Quantitative analysis of transferable hydrogen formed by growth of aromatic cluster during coal pyrolysis
coal pyrolysis
transferable hydrogen
quantitative analysis
SY-64628
PA103Examination of ammonia produced in P/L reaction of activated nitrogen generated by dielectric barrier discharge
ammonia
DBD
SY-64675
PA104Production of pyro-hydrochar from marine biomass, Undaria pinnatifida and its application as solid acid catalyst
Carbonaceous material
Marine biomass
Solid acid catalyst
SY-64324
PA105Preparation of Bamboo-Structured Cellulose and Its Application to Noble Composite Materials
organosolv treatment
cellulose composite
bamboo
SY-64349
PA106Establishment of InP quantum dot semiconductor synthesis method using micro flow reactor
Quantum dot
Micro flow reactor
SY-64150
PA107Simulation of a CVD reactor with detailed reaction mechanism and OpenFOAM
CVD
Simulation
OpenFOAM
SY-64717
PA108CH4 dry reforming process with capturing solid carbon from CO2: intensification of carbon capturing rate
Methane dry reforming
Carbon capture
Structured catalyst
SY-64575
PA109Catalytic cracking of 3-ring and 4-ring polycyclic aromatic hydrocarbons with hydrogen transfer reaction
polycyclic aromatic hydrocarbons
catalytic cracking
hydrogen transfer
SY-64816
PA110Promotion effect of Ho doping on OMS-2 catalysts for toluene combustion at low temperatures
Volatile organic compounds
Toluene oxidation
Ho-OMS-2 catalysts
SY-6415
PA111Development of numerical solver for methanation reactor considering flow and reaction and heat transfer
methanation
simulation
OpenFOAM
SY-64425
PA112Degradation behavior of Pt-based catalysts by impurity sulfur component for CO2 reforming of methane
CO2 reforming of methane
Sulfur poisoning
Catalyst degradation
SY-64599
PA113Methane reforming using composite nanocatalyst
chemical loop
methane reforming
metal supported
SY-64342
PA114Effect of F doping on the In-based catalysts for the promoting of electrochemical reduction of CO2 to formic acid
CO2 reduction
electrocatalysts
In-based catalysts
SY-64127
PA115Role of supported noble metal catalysts for reduction of selenate in aqueous solution
Selenate Reduction
wastewater treatment
supported noble metal catalysts
SY-64340
13:40– 14:40PA121Evaluation of hydrogen production rate in the electrolysis of water with hydrogen-permeable Pd-Ag membrane
Electrolysis of water
Hydrogen
Palladium membrane
SY-64204
PA122Preparation of 2-chloropropane via catalytic hydrogenation
2-chloropropene
2-chloroprpane
Pd
SY-6410
PA123Catalytic conversion of chitin to useful chemicals
Chitin
Catalytic conversion
Chemicals
SY-64819
PA124In-situ catalytic upgrading of bio-oil over metal-doped hierarchical HZSM-5 catalyst
Bio-oil
hierarchical HZSM-5
Catalytic upgrading
SY-64121
PA125Separation and recovery of phosphorous from dephosphorization slag using acid-alkali treatment
dephosphorization slag
phosphorous
recovery
SY-6411
PA126Steam reforming of toluene over plate-type Ni/Al2O3 structured catalyst : Effect of co-feeding oxygen
Structured catalyst
Autothermal steam reforming
Toluene
SY-64215
PA127Catalyst development for dry reforming of methane using Pd membrane reactor
membrane reactor
oxygen storage capacity
catalyst
SY-64293
PA128Effect of catalyst matrix on catalytic cracking of lipids
catalytic cracking
deoxygenation
triglyceride
SY-64763
PA129Selective isomerization of C6 hydrocarbons by core-shell structured MFI-type zeolite
Isomerization
Zeolite
Core-shell structure
SY-64598
PA130Synthesis of MnOx dominated catalysts with cubic structure and its application in the catalytic combustion of volatile organic compounds
volatile organic compounds
Catalytic combustion
MnOx/Co-Fe/NF catalysts
SY-64126
PA131Kinetic modeling of CO2 methanation and investigation of catalyst effectiveness factor
methanation
catalyst
kinetic model
SY-64689
PA132Detailed chemical kinetic modeling of CO2 methnation over Ni catalyst
methanation
kinetic
catalyst
SY-64740
PA133Development of Detailed Chemical Kinetic Model of Water Gas Shift Reaction over Several Solid Catalysts
catalyst
WGS
simulation
SY-64371
PA134Effect of Molar Ratio of Reductants of H2O and NH3 as well as Loading Amount of Cu on CO2 Reduction Performance over Cu/TiO2 Photocatalyst
Photocatalyst
CO2 Reduction Performance
Reductants Combination
SY-6443
PA135Role of supported noble metal catalysts for oxidation of arsenite in aqueous solution
Arsenite oxidation
wastewater treatment
supported noble metal catalysts
SY-64341
Hall P()
ST-24 [Trans-Division Symposium]
Cell, Energy Conversion and Storage Technology Supporting Next Generation Society (Poster Presentation Category)
(14:40–17:40)
14:40– 15:40PB101Co-Ni@N doped carbon nanotubes: a promising cathode with excellent performance for lithium sulfur batteries
cathode material
Lithium Batteries
Co-Ni@N doped carbon nanotubes
ST-2416
PB102VMoS2 with expanded interlayer spacing for enhancing sodium storage capacity
anode material
Na ion Batteries
VMoS2
ST-2417
PB103Li-Al Layered Double Hydroxide filled Solid Electrolyte for Solid-State Lithium Batteries
Solid-State Lithium Batteries
Solid Electrolyte
Li-Al Layered Double Hydroxide
ST-24124
PB104Fluoropyridine as electrolyte solvent to achieve high-performance lithium metal batteries
lithium metal batteries
electrolyte solvent
Fluoropyridine
ST-24125
PB105Synthesis of Nanosized Solid-Electrolyte by Liquid Shaking Method
All-solid-state lithium battery
Liquid Shaking method
Li3PS4
ST-24210
PB106Cryo-FIB-SEM observation of cathode slurry during dry process for a Li-ion battery
Cryo-scanning electron microcopy (Cryo-SEM)
Focused-ion beams (FIB)
Slurry
ST-24404
PB107Vanadate Glasses containing Chromium (III) Oxide synthesized by the Melt Quenching Method, and its Application to the Cathode Active Materials of Lithium-ion Battery
Melt quenching method
Lithium-ion battery
cathod active material
ST-24762
PB108Simulation of all solid state battery with effect of external stress and volume expansion
(Kyushu U.) *(Stu)Nunoshita K., (Stu)Hirate R., (Reg)Kimura N., (Reg)Inoue G., (Reg)Tsuge Y.
all-solid state battery
numerical simulation
stress analysis
ST-24873
PB109Estimation of structural properties of porous electrode layer by simulation, observation and machine learning
porous electrode layer
machine learning
image processing
ST-24880
PB110Improved current of a vanadium redox flow battery by the activation of seamless porous carbon
vanadium redox flow battery
seamless porous carbon electrode
electrode-material activation
ST-24351
PB111Effect of activation method on the durability of carbon electrodes for vanadium redox flow battery
vanadium redox flow battery
carbon electrode durability
electron beam
ST-24539
PB112Vanadate Glass-based Air-Electrode Catalyst synthesized by the Melt Quenching Methode,and Substitutional Effect of 3d-block elements
Air-electrode glass catalyst
vanadate glass
3d-block elements
ST-24856
15:40– 16:40PB121Study on the high performance thermal battery by Cu doped LiOH layer.
Thermal battery
LiOH
ST-24846
PB122Evaluation of PEM and GDL THIcknesses and MPL on Various Characteristics of Single Cell of PEFC Operated at High Temperature
PEFC
PEM and GDL Thicknesses
MPL
ST-2456
PB123Study on preparation method of fuel cell electrocatalyst with reduced graphene oxide as support
graphene oxide
fuel cell
electrocatalyst
ST-24238
PB124Preparation of Free-standing Graphene Oxide Membrane Modified with Vinylbenzene Sulfonic Acid for fuel cell
graphene oxide
fuel cell
Electrolyte membrane
ST-24241
PB125Evaluation of platinum-oxidation behaviors by water for high-voltage operation of polymer electrolyte fuel cells
PEFC
Catalyst
Membrane-electrode assembly
ST-24544
PB126Microbial synthesis and electrochemical properties of Pt electrode catalysts based on biomineralization
Platinum nanoparticles
Electrode catalysts
Fuel cell
ST-24566
PB127Structural Control of Connected Pt-Co catalysts for Enhanced Oxygen Reduction Performances
Polymer Electrolyte Fuel Cell
Carbon-Free
Chemically Ordered Structure
ST-24610
PB128Effect of conductivity on the performance of non-meal PEFC cathode using silk-derived activated carbon
Polymer electrolyte fuel cell
Metal free cathode
Conductive agent
ST-24885
PB129Overvoltage characteristic of low-Pt PEFC cathode prepared by performing core-shell reaction directly in Ru nanosheet catyalyst layer
Polymer electrolyte fuel cell
Nanosheet
Core-shell structure
ST-24891
PB130Fabrication of defect-rich Cu nanowire@bimetallic oxides with core@shell structure as electrocatalysts for oxygen evolution reaction
Electrocatalyst
Water splitting
oxygen evolution reaction
ST-24123
PB131Hydrogen Permeation Measurements of Proton-Conducting Lanthanum-Based Oxide Composite Electrolyte Membranes
(U. Tokyo) *(Stu)Tajima S., (Reg)Matsuo H., (Reg)Otomo J.
Solid oxide fuel cells
Mixed proton-electron conductor
Hydrogen permeable membranes
ST-24569
PB132Study on growth of carbon nanotubes on oxide ion conductor
Carbon Nanotube
Solid Oxide Fuel Cell
ST-24693
16:40– 17:40PB141Development of a power generation simulation model for solar cells including shadow effect by combining operation principles of solar cell and machine learning
Energy system
Solar cell
Simulation
ST-24668
PB142Multiple regression analysis of electricity demand with machine learning for grid synchronization distributed generation system
distributed generation
renewable energy
machine learning
ST-24732
PB143Implementation analysis of energy storage technology contributing to grid power stability in the solar cell based distributed electricity grid
Energy system
Energy storage
Power grid
ST-24896
PB144Development and Evaluation of a Heat Exchange System with Multistage Latent Heat Storage
Heat exchanger
Ratent Heat storage
Heat transfer
ST-2419
PB145Evaluation of thermo-physical property and solidification/melting process on latent heat storage materials
solidification and melting
heat storage
thermo-physical property
ST-2422
PB146Development and evaluation of a multi stage heat exchange system using latent heat storage -effect of heat storage direction-
heat transfer equipment
multi stage system
heat storage direction
ST-2452
PB147Development and evaluation of a multi stage heat exchange system using latent heat storage -Temperature field-
heat transfer equipment
multi stage system
heat storage material
ST-24109
PB148CO2-Recycling Biomass Gasification System for Hydrogen Production with Water Gas Shift and Membrane-based CO2 Capture
Biomass Gasification System
Hydrogen Production
CO2 capture
ST-24128
PB149Temperature measurement of combustion pot for small pellet stove
wood pellet
combustion temperature
small stove
ST-24318
PB150[No show] Exhaust gas components and tar components under the lowest output condition with small pellet stove
small pellet stove
exhaust gas components
tar components
ST-24321
PB151Effective conversion of non-conventional energy resources using sub-nano scale controlled composite materials
Non-conventional energy
sub-nano
low temperature
ST-24776
Hall R()
SY-58 [Symposium of Division of Separation Processes]
(2) The state of the art of Particle-Fluid Separation Process
(9:40–10:20) (Chair: Tanaka Takanori)
9:40– 10:00R103Recovery mechanism of Pd nanoparticle dispersed in polymeric solution by addition of water-soluble polymer solution
Pd nanoparticle
polymer precipitaion
recovery
SY-58130
10:00– 10:20R104Sequential separation of silicon, aluminum and copper in waste Si-based solar cells by flotation method
Flotation
Waste solar cell
Sodium dodecyl sulfate
SY-58884
(10:40–11:20) (Chair: Iwata Masashi)
10:40– 11:00R106Adsorption behavior of various heavy metals by insolubilized humus soil
adsorption
heavy metal
humus soil
SY-58268
11:00– 11:20R107Modeling of ultrasonic-atomization drying based on drying rate measurement
ultrasonic atomization
ultrasonic drying
drying rate
SY-58749
(11:20–12:00) (Chair: Kawasaki Kenji)
11:20– 11:40R108Dramatic increase in the amount of trapped particles in precoat filtration using fine bubbles
Precoat filtration
Fine bubble
Constant rate filtration
SY-58530
11:40– 12:00R109Filtration process of colloidal suspension containing water-soluble protein
filtration
protein
colloid
SY-58583
SY-60 [Symposium of Division of Separation Processes]
(4) Trend of Adsorption, Ion-Exchange and Extraction
(13:20–14:40) (Chair: Oshima Tatsuya, Kawakita Hidetaka)
13:20– 13:40R114Development of non-isothermal adsorption column model to evaluate thermal management using phase change materials
non-isothermal detailed column model
phase change material
breakthrough curve
SY-60355
13:40– 14:00R115Separation of Palm Fatty Acid Distillate for Recovery of Physiologically Active Component by Activated Carbon
Palm Fatty Acid Distillates
Physiologically Active Component
Adsorption
SY-60606
14:00– 14:20R116Saccharide adsorption to germanium-immobilized resin
germanium
saccharide
adsorption
SY-60131
14:20– 14:40R117Biomass-derived functional carbon material for selective removal of heavy metals from wastewater
biomass
N-doped carbonaceous functional raterials
selective adsoption
SY-60570
(15:00–16:20) (Chair: Shimojo Kojiro, Ohto Keisuke)
15:00– 15:20R119Metal Extraction with Hydrophobic Pseudoprotic Ionic Liquid
Extraction
Ionic Liquid
Metal
SY-60160
15:20– 15:40R120A study on structural requirement for ion-solvation type extractants to extract metals in hydrochloric acid media
extraction
ion solvation
gold
SY-60795
15:40– 16:00R121Preparation of new diphosphonic acid reagent for extraction of rare earth metal ions
diphosphonic acid
solvent extraction
rare earth
SY-60280
16:00– 16:20R122Metal extraction behavior with extraction reagents based on three different frameworks
New extraction reagent
different frameworks
metal extraction
SY-60445
Hall S()
SY-61 [Symposium of Division of Separation Processes]
(5) Latest Trends in Development of Membranes and Membrane Processes
(9:00–10:20) (Chair: Nagasawa Hiroki, Taniguchi Ikuo)
9:00– 9:20S101Precise surface modification of membrane using zwitterionic polymer and its antifouling properties
Membrane fouling
Surface modification
Zwitterionic polymer
SY-61541
9:20– 9:40S102Controlling the formation of porous polyketone membranes via a cross-linkable alginate additive for oil-in-water emulsion separations
polyketone membrane
alginate
phase separation
SY-61320
9:40– 10:00S103Development of low-fouling membranes grafted with carboxybetaine polymers
Membrane
Low-fouling
Carboxybetaine polymer
SY-61498
10:00– 10:20S104One step surfactant entrapment onto PVDF hollow fiber membrane surface before phases separation during air gap distance in the TIPS process by using a triple-layer orifice spinneret
surfactant entrapment
PVDF hollow fiber membrane
triple-layer orifice spinneret
SY-61388
10:20– 10:40Break
(10:40–12:00) (Chair: Oshiba Yuhei, Kodama Satoshi)
10:40– 11:00S106Development of CO2 Separation Membrane Using Acrylic Microfiltration Membrane with Hierarchical Surface Structure
CO2 separation
Porous membrane
SY-61858
11:00– 11:20S107Pore structure controllability and CO2 permeation properties of silica-derived membrane with Dual-Network structure
Dual-network
Gas separation
Organic-inorganic hybrid membrane
SY-61459
11:20– 11:40S108Evaluation of volatile characteristics and volatility suppression of CO2 separation membrane containing low-molecular amines
CO2 separation
nano gel particle
low-molecular amine
SY-61863
11:40– 12:00S109Molecular considerations for pressure dependence of separation characteristics of carbon dioxide on chabazite-type zeolite membrane
CHA membrane
Non equilibrium molecular dynamics
High pressure condition
SY-61359
SY-62 [Symposium of Division of Separation Processes]
(6) Industrial Membrane Technologies 2020
(13:00–13:40) (Chair: Matsuyama Hideto)
13:00– 13:20S113[Requested talk] Novel membrane process for highly concentrated solutions without heating and high pressure
Forward Osmosis
concentration without heat and pressurization
food, beverage and pharmaceutical industries
SY-62558
13:20– 13:40S114[Requested talk] Refining processes of used organic solvents with distillation and membrane
refining
used organic solvent
distillation
SY-62759
(13:40–14:40) (Chair: Nomura Mikihiro)
13:40– 14:00S115[Requested talk] Relationship between Surface Water Conditions and Transmembrane Pressure of MF membrane
Membrane filtration
Surface water
Drinking water treatment
SY-62346
14:00– 14:20S116[Requested talk] High Salinity Concentration Technology-Development of Hollow Fiber Brine Concentration Membrane-
Brein Concentration
Hollow fiber
SY-62555
14:20– 14:40S117(withdrawn)

100812
(15:00–16:00) (Chair: Akamatsu Kazuki)
15:00– 15:20S119[Requested talk] Development of water treatment membrane using innovative cellulose derivative
Cellulose derivative
Chemical resistance
High flux
SY-62288
15:20– 15:40S120[Requested talk] Development of Anti-Fouling High Pressure RO and Application to ZLD process
ZLD
Anti-Fouling
RO
SY-62144
15:40– 16:00S121[Requested talk] Innovative membrane technologies for Artificial photo synthesis process
Artificial photo synthesis
membrane
reactive separation
SY-62456
Hall T()
SY-66 [Symposium of Division of Systems, Information and Simulation Technologies]
Development of Systems Approach Aiming at Process Intensification
(9:00–10:00) (Chair: Atsumi Ryosuke)
9:00– 9:20T101Decision support method for the choice between batch and flow syntheses in drug substance manufacturing
Drug substance manufacturing
Batch and flow syntheses
Leaching
SY-66484
9:20– 9:40T102Observation of mixing and flowing state in a batch-type oscillatory baffled reactor
oscillatory baffled reactor
decolorization
SY-66301
9:40– 10:00T103Investigation of catalyst structure-performance relationship in dry reforming of methane by using lattice Boltzmann method
Lattice Boltzmann method
Structure-performance relationship
Dry reforming of methane
SY-66358
(10:00–11:20) (Chair: Horie Takafumi)
10:00– 10:20T104Design of high-selective toluene hydrogenation process using semi-empirical prediction model for byproducts formation behavior
Hydrogen energy
Renewable enegy
Process intensification
SY-66393
10:40– 11:00T106Methods of spatiotemporal data analysis for development of semi-empirical prediction model for generation of trace hydrocarbon
Hydrogen carrier
Spatiotemporal data analysis
semi-empirical prediction model
SY-66461
11:00– 11:20T107Application of DEM-CFD simulation to rotary powder die-filling
Discrete Element Method
Computational Fluid Dynamics
Die Filling
SY-66226
(11:20–12:00) (Chair: Matsumoto Hideyui)
11:20– 12:00T108[Invited lecture] Elementary operations for novel process development technology
process intensification
unit operation
process development
SY-66705
(13:00–13:20) (Chair: Matsuda Keigo)
13:00– 13:20T113[Invited lecture] Development of process intensification technology toward social implementation
Process intensification
Continuous process
Dynamic operation
SY-66709
SY-59 [Symposium of Division of Separation Processes]
(3) Development of Distillation Engineering
(13:20–14:20) (Chair: Matsuda Keigo)
13:20– 14:00T114[Review lecture] Process intensification of distillation by thermal or mechanical integration
Distillation
Process intensification
Energy saving
SY-59395
14:00– 14:20T116Comparison of process characteristics of distillation, membrane separation and adsorptive separation for olefin-paraffine separation
Hybrid separation process
Energy saving
Separation process design
SY-59777
(14:20–16:20) (Chair: Yamaki Takehiro)
14:20– 14:40T117Development of binary power generation system with gas-liquid contactor
Organic Rankine Cycle
Distillation
Direct Contact Heat Exchanger
SY-59452
15:00– 15:40T119[Review lecture] Development of Vapor-Liquid Equilibrium Measurement System and Measurement Technology
vapor-liquid equilibrium
thermodynamic consistency
azeotrope
SY-59451
15:40– 16:00T121Design of CO2 absorption process using ionic liquids
(AT-PP) (Reg)Oba S., (Nihon U.) *(Reg)Kodama D.
ionic liquid
CO2
PC-SAFT
SY-59613
16:00– 16:20T122Physical Property Matters on the Development and Design of Distillation Processes
Physical properties
Process Design and development
Distillation
SY-59563
(16:20–17:00) (Chair: Oba Shigeo)
16:20– 17:00T123[Review lecture] Progress in Distillation Models and Distillation Column Design
Distillation Model
Distillation Column Design
SY-59449
Hall U()
SY-72 [Symposium of Division of Biochemical Engineering]
Omics and AI Driven Biomedical Engineering
(13:00–14:00) (Chair: Toya Yoshihiro)
13:00– 13:40U113[Invited lecture] Kinetic trans-omics for insulin-stimulated adipocytes
kinetic trans-omics
insulin
adipocyte
SY-72229
13:40– 14:00U115Computer model of the metabolism of the whole human body
Robustness
Kinetics
Computer model
SY-721
(14:00–14:40) (Chair: Kurata Hiroyuki)
14:00– 14:20U116Metabolic Pathway Design and Experimental Evaluation of Cellular Performance for Bio-Production
Metabolic Engineering
in silico design
13C-MFA
SY-72289
14:20– 14:40U117Identification of a rate-limiting step in metabolic pathway based on in vitro experiment
metabolic pathway
kinetic model
rate-limiting step
SY-72514
Hall V()
SY-75 [Symposium of Division of Energy Engineering]
(13:20–14:40) (Chair: Fushimi Chihiro)
13:20– 13:40V114Simulation of sulfur compounds formation in an entrained-bed coal gasifier using a detailed chemical kinetic model
coal gasifier
a detailed kinetic model
sulfur compounds
SY-75701
13:40– 14:00V115The Role of Flexibility Mechanisms to Meet the Long-term GHGs Mitigation Targets using Grid Featured Energy Technology Model
Flexibility Mechanism
Technology Model
Renewable Energy
SY-7541
14:00– 14:40V116[Invited lecture] Key Aspects of thermal power plants under high penetration of variable renewable
renewable energy
thermal power plant
flexibility
SY-75106
(15:00–15:40) (Chair: Norinaga Koyo)
15:00– 15:20V119CO2 reduction potential and cost of solid biomass fuel production unit integrated with a waste gasification and direct melting system
solid biomass fuel
Waste gasification and direct melting system
CO2 and cost
SY-75535
15:20– 15:40V120Investigation on redox reactions between brown coal and metal ions
low-rank coal
redox reaction
energy conversion
SY-75415
Hall W()
SY-84 [Symposium of Division of Environment]
(9:00–10:20) (Chair: Takahashi Nobuhide, Abe Tatsuo)
9:00– 9:20W101Nitrification and denitrification using acid-tolerant nitrifying bacteria
(Toyo U.) *(Stu)Enobi K., (Stu)Pham Q. H., (Stu)Nagano M., (Reg)Sumino T.
Wastewater treatment
Nitrogen removal
Acid-tolerant nitrifying bacteria
SY-84138
9:20– 9:40W102Effect of bathwater on the inactivation of Legionella pneumophila by low levels of ozonated water in the circulating-type bath
ozonated water
Legionella pneumophila
bathwater
SY-84305
9:40– 10:00W103Development of anammox process for domestic sewage treatment.
wastewater treatment
nitrogen removal
anammox
SY-84227
10:00– 10:20W104Functional Eco-Feeding of Plant Residues Using Aurantiochytrium sp. L3W Strain
Plant food residues
lipid-producing microorganisms
highly unsaturated fatty acids
SY-84416
(10:40–12:00) (Chair: Nakai Satoshi, Doi Toshifusa)
10:40– 11:00W106Effect of BOD inhibition on nitrification for low ammonium nitrogen treatment
(Toyo U.) *(Stu)Pham Q. H., (Stu)Enobi K., (Reg)Sumino T., (Kuraray) (Cor)Hirai Y., (Cor)Ukai Y., (Cor)Fujii H.
BOD
Wastewater treatment
Nitrogen removal
SY-84164
11:00– 11:20W107Stability and treatment characteristics of nitrification using low-temperature tolerant nitrifier
Nitrification
Low-temperature
SY-84185
11:20– 11:40W108Ecological effect assessment of chelate using Daphnia magna
Daphnia
EDTA
immobilization test
SY-84779
11:40– 12:00W109Characteristics of denitrification using activated sludge acclimated with high concentration of urea and nitrate.
wastewater treatment
denitrification
membrane bioreactor
SY-84191
(13:00–14:40) (Chair: Matsuno Yasunari, Sumino Tastuo)
13:00– 13:20W113Characteristic of radioactive-cesium removal using low-temperature molten salt containing Fluorine
Radioactive-cesium
FSI salt
Volume redauction
SY-84489
13:20– 13:40W114Selective sorbents for Se(IV) and Se(VI) using porous silica and peptides
Selenium
Adhesive peptide
Molecular imprinting technology
SY-84827
13:40– 14:00W115Preparation of selective sorbents for selenium(IV) and selenium(VI) composed of lysine-peptide and porous silica using molecular imprinting technology
Selenium
adhesive peptide
Molecular imprinting technology
SY-84826
14:00– 14:20W116Improvement of Zn and Cd removal using manganese oxide
Acid mine drainage
Manganese oxide
Surface complexation model
SY-84101
14:20– 14:40W117Removal of elemental mercury in waste combustion flue gas by slaked lime and metal sulphide composites
Mercury removal
catalyst
waste combustion flue gas
SY-84773
(15:00–16:20) (Chair: Tokoro Chiharu, Gotoh Takeshi)
15:00– 15:20W119Study on the deterioration of storage containers for contaminated soil caused by long-term storage at temporary storage sites in Fukushima Prefecture
Flexible container
deterioration
long-term storage
SY-84458
15:20– 15:40W120Effect of grinding method on particle size and phosphate ion elution behavior of sludge
sludge
phosphate ion
grinding
SY-84473
15:40– 16:00W121Preparation of artificial aggregate by pelletizing crushed waste FRP and cement using batch pan pelletizer
Pelletization
Cement and FRP
Artificial aggregate
SY-84157
16:00– 16:20W122Rapid removal of basic dyes in water and an attempt to elusidate its mechanism
flotation
air-water interface
simulation
SY-84803
(16:20–17:40) (Chair: Mori Takamasa, Shono Atsushi)
16:20– 16:40W123Leaching of Chalcopyrite (CuFeS2) using Organic Aqua Regius
Copper chloride
DMSO
SY-8414
16:40– 17:00W124Specific reduction ability for Au of ladder-type cyclic compound (Noria)
Ladder-type cyclic compounds
Au
Reduction
SY-84319
17:00– 17:20W125Metal leaching from LiCoO2 using organic acid by hydrothermal treatment
lithium-ion battery
lithium cobalt oxide
glycolic acid
SY-84187
17:20– 17:40W126Heat and CO2 supply to greenhouses by aerobic fermentation of pear tree pruned branches
aerobic fermentation
moisture content
fermentation temperature
SY-84545
Hall X()
SY-74 [Symposium of Division of Supercritical Fluids]
(9:00–10:20) (Chair: Kanda Hideki, Sakabe Junichi)
9:00– 9:20X101Fabrication of multilayer filter using CAPC method
carbon dioxide
polymer
filter
SY-7438
9:20– 9:40X102Continuous fractionation for red perilla paste solution by counter-current extraction with supercritical CO2 based on high-pressure vapor-liquid equilibria
Phase equilibria
counter-current extraction
supercritical fluid extraction
SY-74492
9:40– 10:00X103Optimization of the condition in extraction of antioxidants from strawberry leaf with supercritical carbon dioxide and entrainer.
Supercritical Carbon dioxide
Extraction
Strawberry leaf
SY-74212
10:00– 10:20X104The effect of water contents on composition of essential oil extracted from immature citrus by supercritical carbon dioxide
supercritical carbon dioxide
essential oil
water contents
SY-74326
10:20– 10:40Break
(10:40–11:00) (Chair: Inomata Hiroshi)
10:40– 11:00X106[The SCEJ Award for Outstanding Young Researcher] Development of Fast Extraction and Separation Process Using Supercritical CO2
The SCEJ Award for Outstanding Young Researcher
SY-7428
(11:00–12:00) (Chair: Akizuki Makoto, Sasaki Mitsuru)
11:00– 11:20X107Measurements of diffusion coefficients of Platinum(II)acetylacetonate in high temperature supercritical carbon dioxide by CIR method
Diffusion coefficient
Supercritical carbon dioxide
Pt(acac)2
SY-74878
11:20– 11:40X108Retention coefficient correlation model using solubility parameter for supercritical fluid chromatography
supercritical fluid chromatography
entropy-based solubility parameter
solubility parameter
SY-74392
11:40– 12:00X109Subcritical Water Extraction of Beta-glucans from Ganoderma lucidum Spore
Subcritical Water Extraction
Ganoderma lucidum spore
Beta-glucans
SY-74485
(13:00–14:20) (Chair: Sato Takafumi, Hiraga Yuya)
13:00– 13:40X113[Invited lecture] Gas turbine for Supercritical CO2 Cycle Fossil Power System
Gas turbine
Combustor
Super Critical CO2 cycle
SY-74178
13:40– 14:00X115Recovery of Metals from Spent Lithium-ion Battery by Supercritical Carbon Dioxide with Chelating Ligand
Supercritical carbon dioxide
extraction
metal recovery
SY-7490
14:00– 14:20X116Metal recovery from spent LIB using scCO2
(Nagoya U.) *(Stu·PCEF)Ozaki M., Zhao X., (Reg)Wahyudiono, (Reg)Kanda H., (Reg)Goto M.
lithium ion battery
supercritical carbon dioxide
recycle
SY-74263
(14:20–14:40) (Chair: Fujii Tatsuya, Ushiki Ikuo)
14:20– 14:40X117Effect of supercritical CO2 drying condition on properties of porous carbon nanofiber electrode and Li-O2 battery performance.
Supercritical CO2 drying
Carbon nanofiber electrode
Li-O2 battery
SY-74273
14:40– 15:00Break
(15:00–15:20) (Chair: Inomata Hiroshi)
15:00– 15:20X119[The Outstanding Paper Award] Kinetic Study of Hydrothermal Leaching of Lithium Cobalt Oxide with Citric Acid
Hydrothermal Leaching
Lithium Ion Battery
Citric Acid
SY-74897
(15:20–16:00) (Chair: Fujii Tatsuya, Ushiki Ikuo)
15:20– 15:40X120Kinetic analysis of solid base catalyzed reaction in supercritical methanol using transesterification as a model reaction
Supercritical methanol
Solid base catalysts
Kinetic analysis
SY-74743
15:40– 16:00X121Effects of Preparation Conditions of a Supercritical Solution on the Production of Caffeine Microparticles by Spray Drying Using Supercritical CO2
Spray drying
Supercritical CO2
Micronization
SY-74770
(16:00–17:00) (Chair: Ota Masaki, Aizawa Takafumi)
16:00– 16:20X122Production of Amorphous Microparticles of Griseofulvin by Rapid Expansion of Supercritical Solutions (RESS) Using Carbon Dioxide
RESS
Griseofulvin
Amorphous microparticles
SY-74811
16:20– 16:40X123Adsorption equilibria of VOC on mesoporous silica materials in the presence of supercritical CO2
supercritical carbon dioxide
mesoporous silica
adsorption
SY-74584
16:40– 17:00X124CO2-driven phase transition of antibacterial molecular crystal in supercritical CO2
(Tokyo Tech) *(Stu)Akiyama S., (Stu)Hao Y., (Reg)Orita Y., (Reg)Shimoyama Y.
supercritical CO2
antibacterial molecular crystal
CO2-driven phase transition
SY-74611
Hall Y()
SY-51 [Symposium of Division of Physical Properties]
(9:00–10:20) (Chair: Hoshina Taka-aki, Matsukawa Hiroaki)
9:00– 9:20Y101Solubility measurements by adding a co-solvent for an improvement of the solubilities of poorly water-soluble pharmaceutical compound 6-methyl coumarin
Solubility
Co-solvent
Cyclodextrin
SY-51746
9:20– 9:40Y102Flow Analysis of Blood by Falling Needle Rheometer Using a High Vacuum cell
Falling Needle Rheometer
Rheology
viscometer
SY-51731
9:40– 10:00Y103Hydration structure analysis of monohydric- and dihydric-alcohol aqueous solutions via MD simulation
molecular dynamics
alcohol aqueous solution
hydration structure
SY-51542
10:00– 10:20Y104Prediction of melting point depression in high pressure CO2 using molecular interaction energy in equation of state from molecular information
melting point depression
high pressure CO2
molecular information
SY-51607
(10:40–12:00) (Chair: Shimoyama Yusuke, Haruki Masashi)
10:40– 11:00Y106Solubilities and diffusion coefficients of carbon dioxide and nitrogen in poly(vinyl acetate)
solubility
diffusion coefficient
poly(vinyl acetate)
SY-51723
11:00– 11:20Y107Estimation of PC-SAFT EoS parameters for Silica compouds
Group contribution method
Neural Network
Multiple regression analysis
SY-51294
11:20– 11:40Y108Predicting the solubility of metal precursors in supercritical CO2 using PC-SAFT equation of state
supercritical carbon dioxide
solubility
PC-SAFT
SY-51608
11:40– 12:00Y109Solubility and Diffusivity of 1-butene in Propylene-co-polymers
Crystallinity,Solubility
Diffusivity
Rubbery state
SY-51676
(13:00–13:40) (Chair: Kodama Daisuke)
13:00– 13:40Y113[Review lecture] Attempt to clarify the mechanism of kinetic hydrate inhibitor by unidirectional growth method
Methane hydrate
Kinetic hydrate inhibitor
unidirectional growth apparatus
SY-51237
(13:40–14:40) (Chair: Machida Hiroshi, Sato Yoshiyuki)
13:40– 14:00Y115Relationship between magnetic field treatment temperature and material properties for preparation of hexagonal boron nitride/polyimide composite material using magnetic field
Thermal conductivity
Polyimide
Hexagonal boron nitride
SY-51267
14:00– 14:20Y116Effect of AC electric field treatment and viscosity on thermal conductivity of carbon nanofiber /polysiloxane composites
Thermal conductivity
Polysiloxane
Carbon nanofiber
SY-51271
14:20– 14:40Y117Measurement of Solubility of Rubrene in Supercritical CO2 by the Determination of Saturation States Using UV-visible Spectroscopy and the Correlation
Rubrene
Solubility
Supercritical CO2
SY-51790
(15:00–16:20) (Chair: Tsuji Tomoya, Ono Takumi)
15:00– 15:20Y119Application of ionic liquids with environmentally benign anion to liquid-liquid extraction
Liquid-Liquid Equilibria
Ionic liquid
Extraction
SY-51623
15:20– 15:40Y120Prediction of liquid-liquid equilibria using activity coefficient model with molecular information and machine learning
liquid-liquid equilibrium
molecular information
machine learning
SY-51604
15:40– 16:00Y121Determination and correlation of vapor-liquid equilibria necessary for design and development of carbon dioxide absorption process by chemical absorption method
Vapor-liquid equilibria
Carbon dioxide
Chemical absorption method
SY-51733
16:00– 16:20Y122Density and Viscosity measurement and modeling for mixture containing amine/water/ether/CO2
CO2 capture
viscosity
density
SY-51752

Technical program
Technical sessions (Wide)  (For narrow screen)
Session programs
Search in technical program
SCEJ 51st Autumn Meeting (2020)

© 2023 The Society of Chemical Engineers, Japan. All rights reserved.
For more information contact Organizing Committee of SCEJ 51st Autumn Meeting
E-mail: inquiry-51fwww3.scej.org